Tools Taps High Speed Steel Helicoil Categories


Category Matches

Tools Threading

TopHide Pictures

Tools - Taps - High Speed Steel - Helicoil
Tools - Taps - High Speed Steel - Helicoil

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


Tools - Taps - High Speed Steel - Extension
Tools - Taps - High Speed Steel - Extension

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Intermediate small shank spiral point extension taps 150mm long


Tools - Taps - High Speed Steel - Hand
Tools - Taps - High Speed Steel - Hand

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps.


Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps.


Tools - Taps - High Speed Steel - NPT Pipe
Tools - Taps - High Speed Steel - NPT Pipe

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Tools - Taps - High Speed Steel - NPT Pipe - Interrupted
Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Taper Pipe Taps


Tools - Taps - High Speed Steel - Spiral Flute
Tools - Taps - High Speed Steel - Spiral Flute

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Metric spiral flute taps. Ground thread. 50o helix.


Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. 37o helix.


Tools - Taps - High Speed Steel - Spiral Point
Tools - Taps - High Speed Steel - Spiral Point

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Metric intermediate ground thread high speed steel taps. Also called gun taps.


Tools - Taps - High Speed Steel - Spiral Point - Premium
Tools - Taps - High Speed Steel - Spiral Point - Premium

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Premium spiral point intermediate taps in UNC and UNF. Also called gun taps.


Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide
Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide

Search Rating: 52%

Also see combined categories:
All Taps
All Tools

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. Also called gun taps.


Tools - Dies - High Speed Steel
Tools - Dies - High Speed Steel

Search Rating: 44%

Also see combined categories:
All Dies
All Tools

High Speed Steel Button Dies


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Dies - High Speed Steel.

Shafting General Purpose

TopHide Pictures

Rod - Drill Blanks
Rod - Drill Blanks

Search Rating: 41%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Dental Handpiece Parts

TopHide Pictures

High Speed Handpiece Impact-Air Parts
High Speed Handpiece Impact-Air Parts

Search Rating: 32%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of High Speed Handpiece Impact-Air Parts.

Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Plain Bore
Universal Joints - Single Joint - High Speed - Plain Bore

Search Rating: 32%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Universal Joints - Single Joint - High Speed - Solid
Universal Joints - Single Joint - High Speed - Solid

Search Rating: 32%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Unbored. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Universal Joints - Single Joint - High Speed - Bored and Keyed
Universal Joints - Single Joint - High Speed - Bored and Keyed

Search Rating: 32%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. With keyway. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Bearings Single Row Ball

TopHide Pictures

Bearings - Ball - High Speed Cage
Bearings - Ball - High Speed Cage

Search Rating: 32%

Also see combined categories:
All Radial Ball Bearings

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Related Information:

Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Search Rating: 32%

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.

Related Information:

Gearboxes Inline

TopHide Pictures

Gearboxes - Inline - 112.0 x 52.0 Low Backlash
Gearboxes - Inline - 112.0 x  52.0 Low Backlash

Search Rating: 31%

Also see combined categories:
All Inline Gearboxes

Taper Gears - Weight: 1.50kg. TG112 Series.

Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: Less than 8.1 arc/min at output. Max Input Speed: 3000 Rpm.

Related Information:

Motors DC

TopHide Pictures

Motors - DC 36.0X71.0 mm
Motors - DC 36.0X71.0 mm

Search Rating: 31%

Also see combined categories:
All DC Motors

High power, high speed 11,800 RPM unloaded at 12 volts

Related Information:

Power Tool Parts

TopHide Pictures

1900B Planer Makita Parts
1900B Planer Makita Parts

Search Rating: 31%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 1900B Planer Makita Parts.

Workwheel Black and Decker Parts
Workwheel Black and Decker Parts

Search Rating: 30%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Workwheel Black and Decker Parts.

B5006 Bandsaw - Table Mounted GMC Parts
B5006 Bandsaw - Table Mounted GMC Parts

Search Rating: 30%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of B5006 Bandsaw - Table Mounted GMC Parts.

BSG-151 Belt Sander Ozito Parts
BSG-151 Belt Sander Ozito Parts

Search Rating: 30%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of BSG-151 Belt Sander Ozito Parts.

BSR-1000 Belt Sander Ozito Parts
BSR-1000 Belt Sander Ozito Parts

Search Rating: 30%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of BSR-1000 Belt Sander Ozito Parts.

BSR-800 Belt Sander Ozito Parts
BSR-800 Belt Sander Ozito Parts

Search Rating: 30%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of BSR-800 Belt Sander Ozito Parts.

KA85 Belt Sander Black and Decker Parts
KA85 Belt Sander Black and Decker Parts

Search Rating: 30%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of KA85 Belt Sander Black and Decker Parts.

Bushes Plastic

TopHide Pictures

Bushes - Plastic - Iglidur Z - Flanged
Bushes - Plastic - Iglidur Z - Flanged

Search Rating: 30%

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

High temperature. High thermal resistance. Extreme load. High surface speed.

Specific Gravity 1.40 g/cm3. Operating Temp 310 C short term / 250 C long term. Tensile Strength at 20 oC = 95 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Bushes - Plastic - Iglidur Z - Unflanged
Bushes - Plastic - Iglidur Z - Unflanged

Search Rating: 30%

Also see combined categories:
All Plastic Bushes
All Unflanged Plastic Bushes

High temperature. High thermal resistance. Extreme load. High surface speed.

Specific Gravity 1.40 g/cm3. Operating Temp 310 C short term / 250 C long term. Tensile Strength at 20 oC = 95 Mpa. Hardness 81 Shore D (DIN53505). Bushing bore tolerance is F10 after a H7 press fit. Tolerances listed in the tables are after assembly using H7 recommended fit.


Belts Poly Vee

TopHide Pictures

Belts - Poly V - J Section
Belts - Poly V - J Section

Search Rating: 29%

Also see combined categories:
All Posi-Drive Belts

Poly V are ideal for high ratio and high speed drives. J Section is 2.34mm pitch and 3.56mm belt height.


Power Tool Parts

TopHide Pictures

1-3HP Bench Sander 4 Inch GMC Parts
1-3HP Bench Sander 4 Inch GMC Parts

Search Rating: 29%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 1-3HP Bench Sander 4 Inch GMC Parts.

6 Inch Bandsaw Vertical Bench Model GMC Parts
6 Inch Bandsaw Vertical Bench Model GMC Parts

Search Rating: 29%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 6 Inch Bandsaw Vertical Bench Model GMC Parts.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Search Rating: 29%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Search Rating: 29%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Pulleys Poly Vee

TopHide Pictures

Pulleys - Poly V - J Section - Through Bored
Pulleys - Poly V - J Section - Through Bored

Search Rating: 29%

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.


Dental Handpiece Parts

TopHide Pictures

True Speed DME Parts
True Speed DME Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of True Speed DME Parts.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Search Rating: 28%

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Dental Handpiece Parts

TopHide Pictures

Slow Speed 40000 RPM Beaver Parts
Slow Speed 40000 RPM Beaver Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Slow Speed 40000 RPM Beaver Parts.

282A Slow Speed Kavo Parts
282A Slow Speed Kavo Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 282A Slow Speed Kavo Parts.

NPB Slow Speed NSK Parts
NPB Slow Speed NSK Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of NPB Slow Speed NSK Parts.

Fishing Reel Parts

TopHide Pictures

80T Single Speed Penn Parts
80T Single Speed Penn Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 80T Single Speed Penn Parts.

Bearings Ceramic

TopHide Pictures

Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Search Rating: 28%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications, including cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.

Related Information:

Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose
Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Search Rating: 28%

Also see combined categories:
All Threaded Spring Plungers

Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.

Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.


Dental Handpiece Parts

TopHide Pictures

E4R Slow Speed - Contra Angle Green Band NSK Parts
E4R Slow Speed - Contra Angle Green Band NSK Parts

Search Rating: 28%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of E4R Slow Speed - Contra Angle Green Band NSK Parts.

Pulleys Poly Vee

TopHide Pictures

Pulleys - Poly V - J Section - QD Bush
Pulleys - Poly V - J Section - QD Bush

Search Rating: 26%

Use with QD bush to suit your bore requirement

Poly V drives are ideal for high ratio drives and high speed. J Section is 2.34mm pitch and 3.56mm belt height.


Pulley Blocks

TopHide Pictures

Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Search Rating: 25%

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Pulleys - Blocks - Flat
Pulleys - Blocks - Flat

Search Rating: 25%

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Pulleys - Blocks - Eye - Fixed
Pulleys - Blocks - Eye - Fixed

Search Rating: 24%

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Linear Bearings

TopHide Pictures

Bearings - Linear - Frelon J Lined - Closed - Precision
Bearings - Linear - Frelon J Lined - Closed - Precision

Search Rating: 23%

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 126934 products in 3077 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.