Small Parts & Bearings - an MBA company

Tools nitro engine starter and accessories categories


Inserts - Thread Repair - Recoil Starter Sets
Inserts - Thread Repair - Recoil Starter Sets

Also see combined categories:
All Recoil Inserts and Kits

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.


Batteries - Accessories
Batteries - Accessories


Miscellaneous battery accessories - Lipo safety charge sacks - Balancers - Leads - Battery Monitors - Etc

This category may be available in the new MBA online store at Batteries - Accessories.

Related Information:


Ballscrew - Thomson Saginaw - Accessories
Ballscrew - Thomson Saginaw - Accessories

Also see combined categories:
All Ball Screws

Wiper Kits and Flanges for Ball Nuts. Match all components within the Thomson Saginaw range only.

This category may be available in the new MBA online store at Ballscrew - Thomson Saginaw - Accessories.


Castors - Wheel Only
Castors - Wheel Only


This category may be available in the new MBA online store at Castors - Wheel Only.


Ballscrew - Thomson Saginaw - Nut
Ballscrew - Thomson Saginaw - Nut

Also see combined categories:
All Ball Screws

Ball Nuts to Suit Thomson Saginaw ball screws. Match all components within the Thomson Saginaw range only.

All Right hand thread only. This category may be available in the new MBA online store at Ballscrew - Thomson Saginaw - Nut.


Inserts - Thread Repair - Keylocking Starter Sets
Inserts - Thread Repair - Keylocking Starter Sets

Also see combined categories:
All Keylocking Inserts and Kits

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel. Installation is by drilling out the old thread, countersinking, tapping new thread with a standard tap, screwing the insert until slightly below the surface, then tapping down the keys using the tool supplied and a hammer. This category may be available in the new MBA online store at Inserts - Thread Repair - Keylocking Starter Sets.

Related Information:


Tools - Installation - Indexing Plunger
Tools - Installation - Indexing Plunger

Also see combined categories:
All Tools

Two slots provided in the upper end of the body and are accessible when the knob is in the retracted position. For use with WIP type plungers.

This category may be available in the new MBA online store at Tools - Installation - Indexing Plunger.


Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

This category may be available in the new MBA online store at Tools - Thread Insert - Power Drive - EZ-Lok.


Tools - Keys - Hex
Tools - Keys - Hex

Also see combined categories:
All Tools

Long and short series allen keys.

Alloy Steel Heat Treated. Short Arm DIN 911. Long Arm ANSI B18.3 1986. This category may be available in the new MBA online store at Tools - Keys - Hex.


Tools - Sets
Tools - Sets

Also see combined categories:
All Tools

General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.

This category may be available in the new MBA online store at Tools - Sets.


Tools - Sets - Foldup
Tools - Sets - Foldup

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use. This category may be available in the new MBA online store at Tools - Sets - Foldup.


Tools - Tubing Work
Tools - Tubing Work

Also see combined categories:
All Tools

Tube benders and cutters

This category may be available in the new MBA online store at Tools - Tubing Work.

Related Information:


Tools - Circlip Pliers - External
Tools - Circlip Pliers - External

Also see combined categories:
All Tools

External circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - External.


Tools - Circlip Pliers - Internal
Tools - Circlip Pliers - Internal

Also see combined categories:
All Tools

Internal circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Internal.


Tools - Circlip Pliers - Reversible
Tools - Circlip Pliers - Reversible

Also see combined categories:
All Tools

Reversible circlip pliers for internal and external circlips.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected. This category may be available in the new MBA online store at Tools - Circlip Pliers - Reversible.


Tools - E-Clip Applicators
Tools - E-Clip Applicators

Also see combined categories:
All Tools

Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only. This category may be available in the new MBA online store at Tools - E-Clip Applicators.


Tools - Drill Bits
Tools - Drill Bits

Also see combined categories:
All Tools

Extensive range of drill bits, from larger standard sizes down to as small as 0.32mm micro miniature sizes. Sutton - PN - Bordo.

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Drill Bits.


Tools - Drill Bits - Reduced Shank
Tools - Drill Bits - Reduced Shank


Reduced Shanked Drill Bits

This category may be available in the new MBA online store at Tools - Drill Bits - Reduced Shank.


Tools - Rotary Files - Aluminium Cut
Tools - Rotary Files - Aluminium Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Aluminium Cut.


Tools - Rotary Files - Double Cut
Tools - Rotary Files - Double Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Double Cut.


Tools - Rotary Files - Standard Cut
Tools - Rotary Files - Standard Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel. This category may be available in the new MBA online store at Tools - Rotary Files - Standard Cut.


Tools - General
Tools - General

Also see combined categories:
All Tools

Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits

X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more. This category may be available in the new MBA online store at Tools - General.


Tools - Nut Drivers
Tools - Nut Drivers

Also see combined categories:
All Tools

Includes socket wrench for 0-80 size screws

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Nut Drivers.


Tools - Pin Vises
Tools - Pin Vises

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Pin Vises.


Tools - Punches
Tools - Punches

Also see combined categories:
All Tools

Number punch and letter punch sets

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Punches.


Tools - Wrenches
Tools - Wrenches

Also see combined categories:
All Tools

Lengths shown are based on standard stock but may vary. This category may be available in the new MBA online store at Tools - Wrenches.


Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set. This category may be available in the new MBA online store at Tools - Pullers - Dowel Remover and Setter.

Related Information:


Tools - Screw Extractors
Tools - Screw Extractors

Also see combined categories:
All Tools

The quick and easy way to remove broken screws, bolts, pipes and studs.

Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.


Tools - Die Holders
Tools - Die Holders

Also see combined categories:
All Tools

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch). Also called a button die stock.

This category may be available in the new MBA online store at Tools - Die Holders.


Tools - Die Nuts
Tools - Die Nuts

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

This category may be available in the new MBA online store at Tools - Die Nuts.


Tools - Dies - Carbon Steel
Tools - Dies - Carbon Steel

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

This category may be available in the new MBA online store at Tools - Dies - Carbon Steel.


Tools - Installation - For Self Tapping Inserts
Tools - Installation - For Self Tapping Inserts

Also see combined categories:
All Tools

Installation tools for self tapping thread inserts - see the linked inserts categories

This category may be available in the new MBA online store at Tools - Installation - For Self Tapping Inserts.

Related Information:


Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Also see combined categories:
All Tools

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Related Information:


Tools - Taps - Carbon Steel - Hand
Tools - Taps - Carbon Steel - Hand

Also see combined categories:
All Taps
All Tools

Carbon Steel Straight Flute Taps. Starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

Carbon steel hand taps. Carbon Steel (CS) Hand taps. This category may be available in the new MBA online store at Tools - Taps - Carbon Steel - Hand.


Tools - Taps - High Speed Steel - Hand
Tools - Taps - High Speed Steel - Hand

Also see combined categories:
All Taps
All Tools

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps. This category may be available in the new MBA online store at Tools - Taps - High Speed Steel - Hand.


Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps. Older stock is Triangle Brand (UK). Newer stock is Volkel Brand (German). This category may be available in the new MBA online store at Tools - Taps - High Speed Steel - Hand - Sets.


Tools - Taps - High Speed Steel - Spiral Point
Tools - Taps - High Speed Steel - Spiral Point

Also see combined categories:
All Taps
All Tools

Metric intermediate ground thread high speed steel taps. Also called gun taps.

This category may be available in the new MBA online store at Tools - Taps - High Speed Steel - Spiral Point.


Tools - Tap Wrenches
Tools - Tap Wrenches

Also see combined categories:
All Tools

Tee handle and bar types. Suit taps from 1mm to 12mm.

This category may be available in the new MBA online store at Tools - Tap Wrenches.


Tools - Thread Repair
Tools - Thread Repair

Also see combined categories:
All Tools

Quickly repairs damaged screws

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.


Tools - Pin Wrench
Tools - Pin Wrench

Also see combined categories:
All Tools

Used on nuts with two holes in the face.

Constructed of special blued steel. This category may be available in the new MBA online store at Tools - Pin Wrench.


Balls - Tooling - One Piece - Construction - Stainless Steel
Balls - Tooling - One Piece - Construction - Stainless Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 440C Stainless Steel heat treated to 55-58 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Construction - Stainless Steel.

Related Information:


Balls - Tooling - One Piece - Construction - Steel
Balls - Tooling - One Piece - Construction - Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Construction - Steel.

Related Information:


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:


Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 440C Stainless Steel heat treated to 55-58 RC.

Related Information:


Balls - Tooling - One Piece - Shoulder - Steel - Press Fit
Balls - Tooling - One Piece - Shoulder - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Shoulder - Steel - Press Fit.

Related Information:


Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit
Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Shoulder Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

Precision ground shoulder provides precise C dimension to facilitate locating ball centre line. 1144 steel heat treated to 53-57 RC. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Shoulder - Steel - Slip Fit.

Related Information:


Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:


Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Stainless Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

440C Stainless Steel heat treated to 55-58 RC.

Related Information:


Balls - Tooling - One Piece - Standard - Steel - Press Fit
Balls - Tooling - One Piece - Standard - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Standard - Steel - Press Fit.

Related Information:


Balls - Tooling - One Piece - Standard - Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. This category may be available in the new MBA online store at Balls - Tooling - One Piece - Standard - Steel - Slip Fit.

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.