Chain and Sprockets Ladder
Plastic.
Related Information:
Plastic, bronze and steel.
Related Information:
Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners. This category may be available in the new MBA online store at
Sprockets - Idler.
Related Information:
Miniature 3.75mm Pitch.
Related Information:
Match with 12.70x7.75mm simplex chain (08B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.
Related Information:
Match with 9.53x5.7mm steel chain (06B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch.
Related Information:
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.
Related Information:
Match with 19.05x11.68mm simplex steel chain (12B-1 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.
Related Information:
Match with 12.70x7.75mm simplex chain (08B BS)
Related Information:
Match with 12.70x7.75mm simplex chain (08B BS)
Related Information:
Match with 9.53x5.7mm steel chain (06B BS)
Related Information:
Match with 12.70x7.75mm duplex chain (08B-2 BS)
Related Information:
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Related Information:
Match with 15.90x9.65mm duplex steel chain (10B-2 BS)
Related Information:
Nylon - Acetal - With and without bore inserts.
Related Information:
Nylon - Acetal - With and without bore inserts.
Related Information:
Nylon - Acetal - With and without bore inserts.
Related Information:
Nylon - Acetal - With and without bore inserts.
Related Information:
Nylon - Acetal - With and without bore inserts.
Related Information:
25-1 ASA 1/4 Inch. With finished bore.
Related Information:
25-1 ASA 1/4 Inch. With unfinished bore.
Related Information:
25-1 ASA 1/4 Inch. Stainless Steel 303 grade with unfinished bore.
Related Information:
Match with 9.53x4.7mm steel chain (35-1 ASA)
Related Information:
25-1 ASA 1/4 Inch
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch.
Related Information:
Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing
Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley. This category may be available in the new MBA online store at
Bushings - QD.
Related Information:
S3M Series Timing Belts - Limited Range. Enquire for sizes not listed.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.
Related Information:
S3M Series Timing Belts - Limited Range. Enquire for sizes not listed.
Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Pitch (P) - 3.000mm.
Related Information:
TN15 Series Bando Timing Belts - Limited Range. Enquire for sizes not listed.
Belt working load should be rated at approximately 1/15th of their ultimate breaking strength. Overall Height (H1) - 1.3mm. Tooth Height (H2) - 0.7mm. Pitch (P) - 1.500mm. Pitch (P) - 1.500mm.
Related Information:
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Related Information:
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Related Information:
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Related Information:
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.
16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 16DP - Steel.
14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.
16 DP. Approx 4.99mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 16DP - Plastic.
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
12 DP. Approx 6.65mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 12DP - Steel.
14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.
24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 24DP - 14.5 PA - Plastic.
20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.
24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 24DP - Stainless.
14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.
32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 32DP - 14.5 PA - Plastic.
14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 48DP - 14.5 PA - Plastic.
20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 48DP - Stainless.
20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 64DP - Stainless.
20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 96 DP. Approx 0.83mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 96DP - Stainless.
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 10 DP. Approx 7.98mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 10DP - 14.5 PA - Steel.
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 20 DP. Approx 3.99mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 20DP - 14.5 PA - Steel.
20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.
32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 32DP - Stainless Steel.
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 6 DP. Approx 13.3mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 6DP - 14.5 PA - Steel.
14.5o Pressure Angle. Unhardened Steel. DP stands for Diametrical Pitch imperial sizes.
Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 8 DP. Approx 9.98mm between teeth. This category may be available in the new MBA online store at
Gear Racks - 8DP - 14.5 PA - Steel.
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.
96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. This category may be available in the new MBA online store at
Gear Racks - 96DP - Stainless - Side Holes.
Timing Pulleys to suit H Series 12.700mm Pitch. Unfinished Bore.
Related Information:
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.