Springs Compression Conical Categories


Category Matches

Springs Compression

TopHide Pictures

Springs - Compression - Conical
Springs - Compression - Conical

Search Rating: 100%

Also see combined categories:
All Conical Springs

Conical 302 Stainless steel springs

Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate.

Related Information:

Springs - Compression - Long Lengths - Music Wire
Springs - Compression - Long Lengths - Music Wire

Search Rating: 71%

Also see combined categories:
All Compression Springs

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:

Springs - Compression - Long Lengths - Stainless Steel
Springs - Compression - Long Lengths - Stainless Steel

Search Rating: 71%

Also see combined categories:
All Compression Springs

1 metre and half metre lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:

Springs - Compression - Standard - Stainless Steel
Springs - Compression - Standard - Stainless Steel

Search Rating: 71%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Related Information:

Springs - Compression - Standard - Steel
Springs - Compression - Standard - Steel

Search Rating: 71%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Related Information:

Catches

TopHide Pictures

Catches - Compression Spring
Catches - Compression Spring

Search Rating: 70%

Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.

Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals.


Springs Compression

TopHide Pictures

Springs - Drawbar - Stainless Steel
Springs - Drawbar - Stainless Steel

Search Rating: 70%

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.


Springs - Drawbar - Zinc Plated
Springs - Drawbar - Zinc Plated

Search Rating: 70%

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.


Latches Compression

TopHide Pictures

Latches - Compression - L-Handle
Latches - Compression - L-Handle

Search Rating: 46%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Compression - Lift and Turn - Hooked Handle
Latches - Compression - Lift and Turn - Hooked Handle

Search Rating: 46%

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Maximum panel thickness 5.95mm. Positioning pin assures proper latching.


Latches - Compression - Lift and Turn - Straight Handle
Latches - Compression - Lift and Turn - Straight Handle

Search Rating: 46%

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Comes with mounting hardware. Max working load 44kg. M5 mounting screws supplied. For panels thicker than 6.35mm a longer screw and lockwasher combination will be required.


Latches - Compression - T-Handle
Latches - Compression - T-Handle

Search Rating: 46%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Compression - Vibration Proof
Latches - Compression - Vibration Proof

Search Rating: 46%

Handles and housings are black powder coated zinc alloy.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - Compression - Vise-Action - T-Handle - Locking
Latches - Compression - Vise-Action - T-Handle - Locking

Search Rating: 46%

Black powder coated die cast zinc. Keys included. Max working load 67kg. Average ultimate load 150kg.

Catches are reversible allowing for an extended grip range.


Latches - Compression - Vise-Action - T-Handle - Non Locking
Latches - Compression - Vise-Action - T-Handle - Non Locking

Search Rating: 46%

Black powder coated die cast zinc. Max working load 67kg. Average ultimate load 150kg.

Catches are reversible allowing for an extended grip range.


Latches - Compression - Wing
Latches - Compression - Wing

Search Rating: 46%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Mounts Cylindrical

TopHide Pictures

Mounts - Compression
Mounts - Compression

Search Rating: 46%

Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.

Made with durable oil and ozone resistant neoprene. No special tools required for installation.


Latches Other

TopHide Pictures

Latches - Vise Action - Compression
Latches - Vise Action - Compression

Search Rating: 45%

Easy to install. Locks doors then pulls them tight with one half turn. Internal oring gasket provides constant compression. Maximum working load 44kg. Black powder coated die cast zinc housing with black knobs or caps.

Easy to install. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - Vise Action - Compression - Keylocking
Latches - Vise Action - Compression - Keylocking

Search Rating: 45%

Easy to install. Locks doors then pulls them tight with one half turn. Internal oring gasket provides constant compression. Maximum working load 44kg. Black powder coated die cast zinc housing with black knobs or caps.

Easy to install. Key needs to be ordered separately. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Vise Action - Compression - Knob Style - Keylocking
Latches - Vise Action - Compression - Knob Style - Keylocking

Search Rating: 45%

Easy to install. Locks doors then pulls them tight with one half turn. Internal oring gasket provides constant compression. Maximum working load 44kg. Black powder coated die cast zinc housing with black knobs or caps.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Isolators

TopHide Pictures

Mounts - Vibration - Isolation - Compression - Stainless Steel
Mounts - Vibration - Isolation - Compression - Stainless Steel

Search Rating: 45%

Compression shear mounts for harsh environments.

Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.


Mounts - Vibration - Isolation Pads - Compression Shear
Mounts - Vibration - Isolation Pads - Compression Shear

Search Rating: 45%

Also see combined categories:
All Isolation Pad Mounts

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124116 products in 3089 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.