Categories that include the terms: SPRING and STEEL
|
Ball Plungers |  |
Plungers - Spring - Smooth
Stainless Steel or Plastic - No Thread.
|
Ball Transfer Units | |
Ball Transfer Units - Spring Loaded
For conveying materials. From miniature to large.
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
|
Base Mounted Spring Powered Reels | |
Reels - Spring Powered - Base Mounted - Steel
|
Belleville Spring Washers | |
Washers - Disc Spring - Steel
|
Carbon Spring Steel | |
Washers - Flat - Carbon Spring Steel - Precision
Flat Carbon Spring Steel Washers.
|
Washers - Spring
Wave Washers - All Materials.
|
Circlips - External - Special | |
Circlips - External - Inverted
N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel.
Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips.
|
Clevis Joints | |
Joints - Clevis - Spring Clips
Made from 9SMn steel.
|
Collars - Shaft | |
Collars - Shaft - Gripfast
Self Locking - Quick Release.
265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.
|
Couplings - Oldham | |
Couplings - Oldham - Precision Spring Loaded
2.8 to 4.2 Nm. Max Speed: 3000 RPM.
Max Speed: 3000 RPM. Max Backlash: 5 minutes. Max parallel shaft offset: 0.381mm. Max angular offset: 1.5 Degrees. 303 Stainless Steel.
|
Couplings - Uniflex | |
Couplings - Uniflex
High speed to 30000 rpm. 2.3 to 9.27 Nm.
Spring : 1095 Steel Hubs : Cold Rolled Steel. Operating Temperature : 121 Deg C (250 Deg F). Maximum Speed : 30000 RPM. For CUF15 series the spring diameter is the same as the hub diameter.
|
External Spiral Rings | |
Spiral Rings - External - Heavy Duty
AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.
|
Spiral Rings - External - Light Duty
Includes series CE / VS / US - Spring Steel and Stainless Steel.
|
Spiral Rings - External - Medium Duty
AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.
|
Spiral Rings - External - Medium/Heavy Duty
AME / WST / RST - Spring Steel and Stainless Steel.
|
Fasteners - Pins | |
Pins - Roll - Plain
Plain carbon spring steel DIN1481.
|
Pins - Roll - Zinc Plated
Zinc plated spring steel DIN1481.
|
Gas Springs - Adjustable | |
Gas Springs - Adjustable - Push Type - Max 100N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 180N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 400N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 400N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 700N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 1300N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 2600N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force).
|
Gas Springs - Adjustable - Push Type - Max 5000N
Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20°C to +80°C End Position Damping Length: Approx. 10mm. Available Force Range: 500N to 5000N (comes standard with max. force).
|
Indent Blocks | |
Indent Blocks
Indent Blocks: Hardened black oxide sintered steel. Used together with spring plungers for detenting or positioning sliding parts, flaps or for similar applications.
|
Internal Spiral Rings | |
Spiral Rings - Internal - Heavy Duty
Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.
|
Spiral Rings - Internal - Light Duty
Includes series CI / VH / UR - Spring Steel and Stainless Steel.
|
Spiral Rings - Internal - Medium Duty
Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.
|
Spiral Rings - Internal - Medium/Heavy Duty
Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.
|
Levers | |
Levers - Safety Tension
Steel Parts: Quality class 5.8. Ball Knob: Black plastic. Surface Finish: Burnished. Press the handle down until the teeth are fully engaged. The object can now be clamped or released. Spring pressure releases the locking mechanism immediately, restoring the safety function (handle can be turned effortlessly).
|
Mounts - Suspension | |
Mounts - Spring - Suspension - Pedestal
Cadmium plated steel. Temp Range : -60 to 150 Deg C (-76 to 302 Deg F).
|
Mounts - Spring - Suspension - Single Hole
Cadmium plated steel. Temp Range : -60 to 150 Deg C (-76 to 302 Deg F).
|
Mounts - Vibration | |
Mounts - Vibration - Spring - Damped
Temp Range: -70 to 175 Deg C (-94 to 347 Deg F).
Lateral to vertical stiffness approx. 1:1 / Must be loaded vertically through its axis. Elastic limit corresponds to a maximum load in compression of 1.2 g (0.042oz) and radially 0.2 g (0.007oz). Damping factor c/co 0.15 to 0.20. Base Plate: Mild Steel / Springs: High Tensile Steel - Phosphated and dyed black. Isolator: Knitted stainless steel mesh / End Caps: Light Alloy.
|
Mounts - Vibration Dampeners - Spring - Silicone
Damps low frequency vibrations.
Studs: Steel / Body : Silicone Gel / Spring : Piano Wire Type B Nickel Plated. Vertical vibrations damped without horizontal deflection. Compression only. Outstanding shock absorbing ability.
|
Nuts - Hexagonal | |
Nuts - Hexagonal - Binx
Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.
|
Pins - Dowel | |
Pins - Dowel Bushings
Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12.
|
Plungers - Spring | |
Plungers - Spring - Striker Bushings
Use with ball or bolt spring plungers for a hard wearing contact area.
Burnished ground hardened steel.
|
Reels - Spring Powered | |
Reels - Spring Powered - Arbour Mounted - Mounting Stud
To suit arbour mounted spring reels.
Plated steel. Includes spring clip.
|
Spring Assemblies - Bracket - RINO | |
Spring Assemblies - Small Bracket - RINO
Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.
|
Spring Motors | |
Spring Motor Assemblies - Closed - RINO
Budget Assemblies. Average fatigue life of 30,000 cycles.
Springs : 301 Stainless Steel. Average fatigue life of 30,000 cycles. Constant force motor springs offer a compact alternative for long running motors. 50 turns or more at near constant torque can be achieved. Typically used for retrieving and returning. The spring motor has many uses.
|
Spring Motor Assemblies - SDP
Base Mounted.
Base Mounted. Springs : 301 Stainless Steel.
|
Spring Motors - SDP | |
Spring Motors - SDP
301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.
|
Spring Pins | |
Pins - Roll - Stainless Steel
304 and 420 grades DIN1481.
|
Spring Steel | |
Wire - Steel - Spring - Music Wire
SAE 1090 Spring Steel.
|
Springs - Compression | |
Springs - Compression - Metre Lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.
|
Springs - Die | |
Springs - Die
High tensile strength chromium alloy steels. Heat Resistance: Up to +230°C (Loss of load occurs above +120°C). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.
|
Springs - Extension | |
Springs - Extension
Zinc Plated Spring Steel not recommended for applications exceeding 121 Deg C (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 Deg C (500 Deg F). 302 stainless steel is slightly magnetic.
|
Springs - Extension - Metre Lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.
|
Stainless Steel Springs | |
Springs - Compression
|
Springs - Constant Force
|
Springs - Torsion - Left Hand Wound
|
Washers - Lock | |
Washers - Lock - Tabbed - Heavy Duty
Heavy duty WH / TW Series for bearing locknuts.
Carbon spring steel. Use with NH series locknuts.
|
Washers - Lock - Tabbed - MB Series
Standard MB series lockwasher for use with bearing locknuts.
Carbon spring steel. Use with N/AN and NL series locknuts.
|
Washers - Lock - Tabbed - W Series
Standard W/WS series lockwasher for use with bearing locknuts.
Carbon spring steel. Use with N/AN and NL series locknuts.
|
Washers - Safety | |
Washers - Safety
Spring Steel Hardened Black.
|
|
