About Us Brands Download Contact Counter Sales FAQ Freight Payments Products Search Site Technical More Links...

Screws Round Head Steel Slotted Categories


Category Matches

Screws Round Head

TopHide Pictures

Screws - Round Head - Steel - Slotted
Screws - Round Head - Steel - Slotted

Search Rating: 65%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Screws - Roof Bolt - Steel
Screws - Roof Bolt - Steel

Search Rating: 63%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Pins - Dowel

TopHide Pictures

Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Search Rating: 61%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Bumpers

TopHide Pictures

Bumpers - Round - Urethane - Female Washer
Bumpers - Round - Urethane - Female Washer

Search Rating: 59%

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.


Screws Round Head

TopHide Pictures

Screws - Round Head - Brass - Slotted
Screws - Round Head - Brass - Slotted

Search Rating: 49%

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BSW - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Round Head - Brass - Slotted.

Screws - Round Head - Nylon - Slotted
Screws - Round Head - Nylon - Slotted

Search Rating: 49%

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

Screws - Round Head - 304 Stainless - Slotted
Screws - Round Head - 304 Stainless - Slotted

Search Rating: 49%

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:

Screws Cheese Head

TopHide Pictures

Screws - Fillister Head - Steel - Slotted
Screws - Fillister Head - Steel - Slotted

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws Pan Head

TopHide Pictures

Screws - Pan Head - Steel - Slotted
Screws - Pan Head - Steel - Slotted

Search Rating: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Steel - Slotted
Screws - Countersunk - Steel - Slotted

Search Rating: 48%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - BA - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Screws - Shoulder - Slotted Shallow Head - Carbon Steel

Search Rating: 48%

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Search Rating: 48%

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts.


Screws Cheese Head

TopHide Pictures

Screws - Fillister Head - Steel - Philips
Screws - Fillister Head - Steel - Philips

Search Rating: 47%

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws Hex Head

TopHide Pictures

Screws - Hex Head - Steel - Zinc Plated
Screws - Hex Head - Steel - Zinc Plated

Search Rating: 47%

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Bolts

Related Information:

Screws - Hex Head - Steel - Zinc Plated - Full Thread
Screws - Hex Head - Steel - Zinc Plated - Full Thread

Search Rating: 47%

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Set Screws

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Hex Head - Steel - Zinc Plated - Full Thread.

Screws Pan Head

TopHide Pictures

Screws - Pan Head - Steel - Philips
Screws - Pan Head - Steel - Philips

Search Rating: 47%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Philips.

Screws - Pan Head - Steel - Pozidrive
Screws - Pan Head - Steel - Pozidrive

Search Rating: 47%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Pozidrive.

Screws Large Head

TopHide Pictures

Screws - Large Shallow Head - Steel
Screws - Large Shallow Head - Steel

Search Rating: 46%

Metric only

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Large Shallow Head - Steel.

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Socket Head - Carbon Steel
Screws - Shoulder - Socket Head - Carbon Steel

Search Rating: 46%

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Screws Countersunk

TopHide Pictures

Screws - Countersunk - Steel - Philips
Screws - Countersunk - Steel - Philips

Search Rating: 46%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws - Countersunk - Steel - Pozidrive
Screws - Countersunk - Steel - Pozidrive

Search Rating: 46%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws Panel

TopHide Pictures

Screws - Panel - Steel
Screws - Panel - Steel

Search Rating: 46%

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. Carbon steel with black oxide finish.


Screws Thumb

TopHide Pictures

Screws - Thumb - Flat Key Head - Steel
Screws - Thumb - Flat Key Head - Steel

Search Rating: 46%

Also see combined categories:
All Thumb Screws


Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - Steel - Black Oxide
Screws - Self Tapping - Pan Head - Steel - Black Oxide

Search Rating: 46%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Self Tapping - Pan Head - Steel - Black Oxide.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - Steel
Screws - Countersunk - Socket - Steel

Search Rating: 46%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Steel
Screws - Thumb - Knurled  - Steel

Search Rating: 46%

Also see combined categories:
All Thumb Screws

Steel knurled head thumb screws


Screws Button Head

TopHide Pictures

Screws - Button - Socket - Alloy Steel
Screws - Button - Socket - Alloy Steel

Search Rating: 46%

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Button - Socket - Alloy Steel.

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Alloy Steel
Screws - Cap - Socket - Alloy Steel

Search Rating: 46%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - Alloy Steel.

Screws Thumb

TopHide Pictures

Screws - Thumb - Flat Key Head - Washer Face - Steel
Screws - Thumb - Flat Key Head - Washer Face - Steel

Search Rating: 46%

Also see combined categories:
All Thumb Screws

Flat Key head malleable iron screws with an integral washer


Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - Steel - Zinc Plated
Screws - Countersunk - Socket - Steel - Zinc Plated

Search Rating: 46%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Alloy Steel - Brass Tipped
Screws - Cap - Socket - Alloy Steel - Brass Tipped

Search Rating: 46%

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Brass tipped socket cap screws in alloy steel


Screws - Cap - Socket - Alloy Steel - Nylon Locking
Screws - Cap - Socket - Alloy Steel - Nylon Locking

Search Rating: 46%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Alloy steel socket cap screws with nylon locking pellet


Screws - Cap - Socket - Alloy Steel - Nylon Tipped
Screws - Cap - Socket - Alloy Steel - Nylon Tipped

Search Rating: 46%

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Nylon tipped socket cap screws in alloy steel


Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Washer Face - Steel
Screws - Thumb - Knurled - Washer Face - Steel

Search Rating: 46%

Also see combined categories:
All Thumb Screws

Knurled head steel thumb screws with an integral washer


Screws - Thumb - Wing - Washer Face - Steel
Screws - Thumb - Wing - Washer Face - Steel

Search Rating: 46%

Also see combined categories:
All Thumb Screws

Wing head malleable iron screws with an integral washer


Screws Cap Head

TopHide Pictures

Screws - Low Head - Socket
Screws - Low Head - Socket

Search Rating: 46%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Note. Hex key size may. The size listed is the usual and minimum size.

Related Information:

Screws Panel

TopHide Pictures

Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Search Rating: 46%

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Washer Face - Stainless Steel
Screws - Thumb - Knurled - Washer Face - Stainless Steel

Search Rating: 46%

Also see combined categories:
All Thumb Screws

Knurled head stainless steel thumb screws with an integral washer


Screws - Thumb - Knurled - Stainless
Screws - Thumb - Knurled  - Stainless

Search Rating: 46%

Also see combined categories:
All Thumb Screws

Stainless steel knurled head thumb screws


Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Search Rating: 45%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - Zinc Plated
Screws - Self Tapping - Pan Head - Zinc Plated

Search Rating: 45%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Search Rating: 45%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - 316 Stainless
Screws - Cap - Socket - 316 Stainless

Search Rating: 45%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Screws - Cap - Socket - Zinc Plated
Screws - Cap - Socket - Zinc Plated

Search Rating: 45%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Screws Square Head

TopHide Pictures

Screws - Set - Cup Point - Square Head
Screws - Set - Cup Point - Square Head

Search Rating: 45%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws - Set - Dog Point - Square Head
Screws - Set - Dog Point - Square Head

Search Rating: 45%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws Panel

TopHide Pictures

Screws - Panel - Stainless
Screws - Panel - Stainless

Search Rating: 45%

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. 303 Stainless Steel.


Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - 303 - 304 Stainless
Screws - Cap - Socket - 303 - 304 Stainless

Search Rating: 45%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - 303 - 304 Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Search Rating: 45%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Screws - Countersunk - Socket - 316 Stainless
Screws - Countersunk - Socket - 316 Stainless

Search Rating: 45%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Screws Pan Head

TopHide Pictures

Screws - Pan Head - 316 Stainless - Philips
Screws - Pan Head - 316 Stainless - Philips

Search Rating: 45%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:

Screws - Pan Head - 303-304 Stainless - Philips
Screws - Pan Head - 303-304 Stainless - Philips

Search Rating: 45%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - 303-304 Stainless - Philips.

Pins - Pull

TopHide Pictures

Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Dowel

TopHide Pictures

Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Search Rating: 41%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Latches

TopHide Pictures

Latches - Pull - Flush - Locking
Latches - Pull - Flush - Locking

Search Rating: 40%

Low profile. Corrosion resistant. Simple 50.8mm (2 in.) round hole installation. Mounts in panels up to 22.2mm thick. M5 philips pan head mounting screws. Includes tab for inside actuation.

Max working load 26kg. Ultimate load 53kg. Black polycarbonate with stainless spring, keeper and screws.


Cross Blocks

TopHide Pictures

Cross Blocks - Heavy Duty - Two Nuts
Cross Blocks - Heavy Duty - Two Nuts

Search Rating: 37%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Snap Buttons

TopHide Pictures

Snap Buttons - Double End
Snap Buttons - Double End

Search Rating: 36%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Flat Type
Snap Buttons - Flat Type

Search Rating: 36%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Leadscrews

TopHide Pictures

Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Search Rating: 36%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:

Snap Buttons

TopHide Pictures

Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Search Rating: 35%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Search Rating: 35%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Screws Captive

TopHide Pictures

Screws - Captive - Retractable - Steel
Screws - Captive - Retractable - Steel

Search Rating: 34%

Also see combined categories:
All Captive Screws

Compliance with UL 1950 and EN 60950 codes for access areas. Ratchet mechanism allows screw to be tightened down by hand, but a tool is needed to loosen.Fully retractable captive to the panel and spring ejected.

Press in style. Bright chromate zinc plated, case hardened steel with aluminium knob and stainless steel spring. Knobs available either slotted or no.2 phillips.


Cross Blocks

TopHide Pictures

Cross Blocks - Heavy Duty - Two Knobs
Cross Blocks - Heavy Duty - Two Knobs

Search Rating: 34%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Shafting Precision Ground

TopHide Pictures

Supports - Pedestal Two Bolt
Supports - Pedestal Two Bolt

Search Rating: 34%

Also see combined categories:
All Supports

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Related Information:

Screws Thumb

TopHide Pictures

Screws - Thumb - Wing - Steel
Screws - Thumb - Wing - Steel

Search Rating: 33%

Also see combined categories:
All Thumb Screws


Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:

Tube and Tubing

TopHide Pictures

Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Cross Blocks

TopHide Pictures

Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Search Rating: 33%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Stops Spring

TopHide Pictures

Stops - Spring - Round Steel Nose
Stops - Spring - Round Steel Nose

Search Rating: 33%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is hardened and ground smooth. Properly radiused nose for perfect fit with no wobble. Aluminium body.


Screws Shoulder

TopHide Pictures

Screws - Shoulder - Jig and Fixture - Steel
Screws - Shoulder - Jig and Fixture - Steel

Search Rating: 33%

Also see combined categories:
All Shoulder Screws

Used in construction of tool, jig and fixture work. 4140L heat treated steel with black oxide finish.

Also known as stripper bolts.


Spacers

TopHide Pictures

Spacers - Round - Through Bore - Steel
Spacers - Round - Through Bore - Steel

Search Rating: 33%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Steel


Spacers - Round - Through Bore - Stainless Steel
Spacers - Round - Through Bore - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Stainless Steel


Hooks

TopHide Pictures

Shackles - Anchor - Screw Pin - Steel
Shackles - Anchor - Screw Pin - Steel

Search Rating: 33%

Also see combined categories:
All Shackles

Forged carbon steel, self coloured.


Bumpers

TopHide Pictures


Screws Thumb

TopHide Pictures

Screws - Thumb - Shoulder
Screws - Thumb - Shoulder

Search Rating: 33%

Also see combined categories:
All Thumb Screws

303 Stainless Steel


Bumpers

TopHide Pictures

Bumpers - Round - Urethane - Female
Bumpers - Round - Urethane - Female

Search Rating: 33%

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core.


Bumpers - Round - Urethane - Male
Bumpers - Round - Urethane - Male

Search Rating: 33%

Also see combined categories:
All Bumpers

With steel core.


Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Search Rating: 33%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Screws Socket Set (Grub Screws)

TopHide Pictures

Socket Set Screws - Acetal Tipped - Alloy Steel
Socket Set Screws - Acetal Tipped - Alloy Steel

Search Rating: 33%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Acetal Tipped - Stainless Steel
Socket Set Screws - Acetal Tipped - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Brass Tipped - Alloy Steel
Socket Set Screws - Brass Tipped - Alloy Steel

Search Rating: 33%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Socket Set Screws - Brass Tipped - Stainless Steel
Socket Set Screws - Brass Tipped - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Socket Set Screws - Dog Point - Carbon Steel
Socket Set Screws - Dog Point - Carbon Steel

Search Rating: 33%

Also see combined categories:
All Dog Point Grub Screws
All Grub Screws

Dog point grub screws

Related Information:

Socket Set Screws - Nylon Tipped - Alloy Steel
Socket Set Screws - Nylon Tipped - Alloy Steel

Search Rating: 33%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Solder Tipped - Stainless Steel
Socket Set Screws - Solder Tipped - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.

Related Information:

Hooks

TopHide Pictures

Shackles - Anchor - Screw Pin - 316 Stainless Steel
Shackles - Anchor - Screw Pin - 316 Stainless Steel

Search Rating: 33%

Also see combined categories:
All Shackles

Meets US Federal specification RRC-271D Type IV


Pins - Dowel

TopHide Pictures

Pins - Dowel - Standard - Unhardened Steel - Rounded Both Ends
Pins - Dowel - Standard - Unhardened Steel - Rounded Both Ends

Search Rating: 33%

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - DIN7

Diameter tolerances are m6.


Screws Socket Set (Grub Screws)

TopHide Pictures

Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916

Search Rating: 33%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Socket Set Screws - Diamond Knurled Tip - Carbon Steel
Socket Set Screws - Diamond Knurled Tip - Carbon Steel

Search Rating: 33%

Also see combined categories:
All Diamond Knurled Tip Grub Screws
All Grub Screws

Grub screws that grip rough shafts.

Related Information:

Socket Set Screws - Diamond Knurled Tip - Stainless Steel
Socket Set Screws - Diamond Knurled Tip - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Diamond Knurled Tip Grub Screws
All Grub Screws

Grub screws that grip rough shafts.

Related Information:

Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Socket Set Screws - Flat Tip - Aligning - Carbon Steel

Search Rating: 33%

Also see combined categories:
All Flat Ball Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Flat Ball Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:

Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Search Rating: 33%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Rolling Ball Tip - Carbon Steel
Socket Set Screws - Rolling Ball Tip - Carbon Steel

Search Rating: 33%

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Search Rating: 33%

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:

Spacers

TopHide Pictures

Spacers - Round - Threaded
Spacers - Round - Threaded

Search Rating: 33%

Brass or 303 Stainless Steel


Screws Socket Set (Grub Screws)

TopHide Pictures

Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916

Search Rating: 33%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916

Search Rating: 33%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Adhesives Adjusters Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Balsa Bar Batteries Bearings Acetal Bearings Angular C... Bearings Automotive Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Tapered R... Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bearings for Skating Bearings for Wheel... Belts Rounthane Books Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Cloth Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cranks and Wheels

Visa Card Accepted
Visa
Secure Checkout


Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Dubro Accessories Easy Selection Kits Educational Projects Electrical Wire Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Foam Food Processor Parts Framing Fuel Gadgets Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic

Master Card Accepted
Mastercard
Secure Checkout


Gearmotors DC Gearmotors DC Perm... Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Motors Hobby Servo Motors Hobby Shafting Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings to Suit B... Housings with Inte... Hubs ISOPADS Insulators Isolators

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Kites Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Lock Knobs Mushroom Knobs Oval Knobs Pointer Knobs Precision Knobs Push Pull Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Lazy Susans Leads and Connectors Leadscrew Actuators Leadscrews Levers Lifting Chain Lights Linear Slides Locking Assemblies Locking Bushings Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico

Amex Accepted
Amex
Secure Checkout


Magnets Bar Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Model Car Kits Model Personnel Model Planes and H... Modelling Accessories Modelling Paints Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Nuts Lock ORings ORings for Dental ... Oil Seals Oils Specialised Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plastic Plugs Plungers Ball Plungers Indexing Plungers Spring Plywood Positioning Power Adaptors Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Vee Punches Pushbike Bearings RC Boats and Acces... RC Engine Parts RC Filters RC Nitro Accessories RC Nitro Engine Ac... RC Propellers and ... Radio Equipment Ratchets and Pawls Robotic Bases Robotic Servo Motors Robotic Wheels Rod Ends Rollers Screws Screws Button Head

Visa Card Accepted
Visa
Secure Checkout


Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Spare Parts Special Effects Li... Speed Controllers Spinners Splined Shafts and... Sporting Spray Paint

Master Card Accepted
Mastercard
Secure Checkout


Spring Anchors Spring Assemblies Spring Motors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Suspension Units Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Throwing Planes Timing Belt Lengths Timing Belts and P... Timing Belts and P...

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joint Co... Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers General Washers Lock

Amex Accepted
Amex
Secure Checkout


Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wheels RC Plane Wheels and Tyres R... Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 119781 products in 3053 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.