Screws Hex Head Steel Zinc Plated Categories


Category Matches

Screws Hex Head

TopHide Pictures

Screws - Hex Head - Steel - Zinc Plated
Screws - Hex Head - Steel - Zinc Plated

Search Rating: 58%

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Bolts

Related Information:

Screws - Hex Head - Steel - Zinc Plated - Full Thread
Screws - Hex Head - Steel - Zinc Plated - Full Thread

Search Rating: 58%

Also see combined categories:
All Hex Head Screws

BSW and METRIC - Set Screws

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Hex Head - Steel - Zinc Plated - Full Thread.

Screws Panel

TopHide Pictures

Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Search Rating: 51%

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - Steel - Zinc Plated
Screws - Countersunk - Socket - Steel - Zinc Plated

Search Rating: 49%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - Zinc Plated
Screws - Self Tapping - Pan Head - Zinc Plated

Search Rating: 48%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Zinc Plated
Screws - Cap - Socket - Zinc Plated

Search Rating: 48%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Screws - Low Head - Socket
Screws - Low Head - Socket

Search Rating: 44%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Note. Hex key size may. The size listed is the usual and minimum size.

Related Information:

Screws Self Tapping

TopHide Pictures

Screws - Self Drilling - Hex Washer Head
Screws - Self Drilling - Hex Washer Head

Search Rating: 42%

Also see combined categories:
All Self Drilling Screws

Zinc chromate. Fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.


Screws Cap Head

TopHide Pictures

Screws - Low Head - Socket - 316L Stainless
Screws - Low Head - Socket - 316L Stainless

Search Rating: 39%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

316L Stainless Steel. Other sizes available on request.

Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles.


Screws Cheese Head

TopHide Pictures

Screws - Fillister Head - Steel - Philips
Screws - Fillister Head - Steel - Philips

Search Rating: 38%

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws - Fillister Head - Steel - Slotted
Screws - Fillister Head - Steel - Slotted

Search Rating: 38%

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws Pan Head

TopHide Pictures

Screws - Pan Head - Steel - Philips
Screws - Pan Head - Steel - Philips

Search Rating: 38%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Philips.

Screws - Pan Head - Steel - Pozidrive
Screws - Pan Head - Steel - Pozidrive

Search Rating: 38%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Pan Head - Steel - Pozidrive.

Screws - Pan Head - Steel - Slotted
Screws - Pan Head - Steel - Slotted

Search Rating: 38%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:

Screws Round Head

TopHide Pictures

Screws - Round Head - Steel - Slotted
Screws - Round Head - Steel - Slotted

Search Rating: 38%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Screws Large Head

TopHide Pictures

Screws - Large Shallow Head - Steel
Screws - Large Shallow Head - Steel

Search Rating: 37%

Metric only

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Large Shallow Head - Steel.

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Socket Head - Carbon Steel
Screws - Shoulder - Socket Head - Carbon Steel

Search Rating: 37%

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Screws Countersunk

TopHide Pictures

Screws - Countersunk - Steel - Philips
Screws - Countersunk - Steel - Philips

Search Rating: 37%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws - Countersunk - Steel - Pozidrive
Screws - Countersunk - Steel - Pozidrive

Search Rating: 37%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws - Countersunk - Steel - Slotted
Screws - Countersunk - Steel - Slotted

Search Rating: 37%

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - BA - METRIC

Nuts sold seperately - See Nuts.

Related Information:

Screws Panel

TopHide Pictures

Screws - Panel - Steel
Screws - Panel - Steel

Search Rating: 37%

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. Carbon steel with black oxide finish.


Screws Round Head

TopHide Pictures

Screws - Roof Bolt - Steel
Screws - Roof Bolt - Steel

Search Rating: 37%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.

Related Information:

Screws Thumb

TopHide Pictures

Screws - Thumb - Flat Key Head - Steel
Screws - Thumb - Flat Key Head - Steel

Search Rating: 37%

Also see combined categories:
All Thumb Screws


Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - Steel - Black Oxide
Screws - Self Tapping - Pan Head - Steel - Black Oxide

Search Rating: 37%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Self Tapping - Pan Head - Steel - Black Oxide.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - Steel
Screws - Countersunk - Socket - Steel

Search Rating: 37%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.

Related Information:

Screws Shoulder

TopHide Pictures

Screws - Shoulder - Slotted Shallow Head - Carbon Steel
Screws - Shoulder - Slotted Shallow Head - Carbon Steel

Search Rating: 37%

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Steel
Screws - Thumb - Knurled  - Steel

Search Rating: 37%

Also see combined categories:
All Thumb Screws

Steel knurled head thumb screws


Screws Button Head

TopHide Pictures

Screws - Button - Socket - Alloy Steel
Screws - Button - Socket - Alloy Steel

Search Rating: 37%

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Button - Socket - Alloy Steel.

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Alloy Steel
Screws - Cap - Socket - Alloy Steel

Search Rating: 37%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - Alloy Steel.

Screws Thumb

TopHide Pictures

Screws - Thumb - Flat Key Head - Washer Face - Steel
Screws - Thumb - Flat Key Head - Washer Face - Steel

Search Rating: 37%

Also see combined categories:
All Thumb Screws

Flat Key head malleable iron screws with an integral washer


Latches Draw

TopHide Pictures

Latches - Draw - Slam Locks
Latches - Draw - Slam Locks

Search Rating: 37%

Zinc plated steel. Spring activated. Screw holes are 6.1mm x 4.05mm.


Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Alloy Steel - Brass Tipped
Screws - Cap - Socket - Alloy Steel - Brass Tipped

Search Rating: 37%

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Brass tipped socket cap screws in alloy steel


Screws - Cap - Socket - Alloy Steel - Nylon Locking
Screws - Cap - Socket - Alloy Steel - Nylon Locking

Search Rating: 37%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Alloy steel socket cap screws with nylon locking pellet


Screws - Cap - Socket - Alloy Steel - Nylon Tipped
Screws - Cap - Socket - Alloy Steel - Nylon Tipped

Search Rating: 37%

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Nylon tipped socket cap screws in alloy steel


Screws Shoulder

TopHide Pictures

Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Search Rating: 37%

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts.


Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Washer Face - Steel
Screws - Thumb - Knurled - Washer Face - Steel

Search Rating: 37%

Also see combined categories:
All Thumb Screws

Knurled head steel thumb screws with an integral washer


Screws - Thumb - Wing - Washer Face - Steel
Screws - Thumb - Wing - Washer Face - Steel

Search Rating: 37%

Also see combined categories:
All Thumb Screws

Wing head malleable iron screws with an integral washer


Screws - Thumb - Knurled - Washer Face - Stainless Steel
Screws - Thumb - Knurled - Washer Face - Stainless Steel

Search Rating: 37%

Also see combined categories:
All Thumb Screws

Knurled head stainless steel thumb screws with an integral washer


Screws - Thumb - Knurled - Stainless
Screws - Thumb - Knurled  - Stainless

Search Rating: 37%

Also see combined categories:
All Thumb Screws

Stainless steel knurled head thumb screws


Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Search Rating: 37%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Search Rating: 36%

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - 316 Stainless
Screws - Cap - Socket - 316 Stainless

Search Rating: 36%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

Screws Square Head

TopHide Pictures

Screws - Set - Cup Point - Square Head
Screws - Set - Cup Point - Square Head

Search Rating: 36%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws - Set - Dog Point - Square Head
Screws - Set - Dog Point - Square Head

Search Rating: 36%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws Panel

TopHide Pictures

Screws - Panel - Stainless
Screws - Panel - Stainless

Search Rating: 36%

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. 303 Stainless Steel.


Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - 303 - 304 Stainless
Screws - Cap - Socket - 303 - 304 Stainless

Search Rating: 36%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - 303 - 304 Stainless.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Search Rating: 36%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Screws - Countersunk - Socket - 316 Stainless
Screws - Countersunk - Socket - 316 Stainless

Search Rating: 36%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Pins Dowel

TopHide Pictures

Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Search Rating: 36%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Screws Button Head

TopHide Pictures

Screws - Button - Socket - Zinc Plated
Screws - Button - Socket - Zinc Plated

Search Rating: 36%

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:

Latches Draw

TopHide Pictures

Latches - Draw - T-Handle - Zinc Plated Steel
Latches - Draw - T-Handle - Zinc Plated Steel

Search Rating: 36%

Black rubber T Handle with steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Screws Self Tapping

TopHide Pictures

Screws - Self Tapping - Countersunk - Philips - Zinc Plated
Screws - Self Tapping - Countersunk - Philips - Zinc Plated

Search Rating: 35%

Also see combined categories:
All Self Tapping Screws

Countersunk screws length includes head. ie, the full overall length of the screw.


Screws Captive

TopHide Pictures

Screws - Captive - Retractable - Steel
Screws - Captive - Retractable - Steel

Search Rating: 35%

Also see combined categories:
All Captive Screws

Compliance with UL 1950 and EN 60950 codes for access areas. Ratchet mechanism allows screw to be tightened down by hand, but a tool is needed to loosen.Fully retractable captive to the panel and spring ejected.

Press in style. Bright chromate zinc plated, case hardened steel with aluminium knob and stainless steel spring. Knobs available either slotted or no.2 phillips.


Latches Cabinet

TopHide Pictures

Latches - Cabinet - Low Profile
Latches - Cabinet - Low Profile

Search Rating: 35%

Designed mainly for use on light cabinet doors and panels. A distinctive snap lets user know the latch is fully open or closed. Plug barrel and hex nuts are zinc diecast.

Cam, lock washer and screw are made from steel with a nickel plated finish. Hex type accepts 6.35mm (1/4 inch) hex tool. For use on panels up to 6.35mm (1/4 in.) thick. Straight cams.


Screws Self Tapping

TopHide Pictures

Screws - Self Drilling - Pan Head
Screws - Self Drilling - Pan Head

Search Rating: 34%

Also see combined categories:
All Self Drilling Screws

Zinc chromate fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.


Screws Security

TopHide Pictures

Screws - Security - Post Combi Square - Pan Head - Super Zinc
Screws - Security - Post Combi Square - Pan Head - Super Zinc

Search Rating: 34%

Also see combined categories:
All Security Screws

Each 200 pack comes with a Post Combination Driver Bit. Metric only.

Use special tool listed under Screws - Securty - Socket - Tools.

Related Information:

Bumpers

TopHide Pictures

Bumpers - Round - Urethane - Female Washer
Bumpers - Round - Urethane - Female Washer

Search Rating: 34%

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.


Pins Dowel

TopHide Pictures

Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Search Rating: 34%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Brass
Screws - Thumb - Knurled  - Brass

Search Rating: 34%

Also see combined categories:
All Thumb Screws

Brass knurled head thumb screws with zinc or black oxide protective coating.


Latches Adjustable

TopHide Pictures

Latches - Adjustable Lever
Latches - Adjustable Lever

Search Rating: 34%

Die cast zinc with stainless steel springs and roll pins. Available in textured chrome or matte black powder coat. Working load 130kg. Ultimate load 210kg. M5 screws with lock washer supplied. Single hole installation.


Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Search Rating: 33%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 33%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Nuts Hex

TopHide Pictures

Nuts - Hexagonal - Steel
Nuts - Hexagonal - Steel

Search Rating: 33%

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC. Plain and Zinc Plated.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Latches T-Handle

TopHide Pictures

Latches - T-Handle - Basic
Latches - T-Handle - Basic

Search Rating: 33%

Made of die cast zinc with matte black polyester powder coated and zinc alloy plated steel parts. Max working load 44kg. Average ultimate load 88kg. Three hole mount installation. 8-32 screws and lockwashers supplied for max 4mm door thickness.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Screws Hex Head

TopHide Pictures

Screws - Hex Head - 304 Stainless
Screws - Hex Head - 304 Stainless

Search Rating: 32%

Also see combined categories:
All Machine Screws

Metric - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Hex Head - 304 Stainless.

Screws - Hex Head - Brass
Screws - Hex Head - Brass

Search Rating: 32%

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws UNC and UNF

Nuts sold seperately - See Nuts.

Related Information:

Screws - Hex Head - Plain - Nylon
Screws - Hex Head - Plain - Nylon

Search Rating: 32%

Also see combined categories:
All Hex Head Screws
All Plastic Screws

UNC - UNF

Related Information:

Screws - Hex Head - Set - Titanium Ti-Gr5-Ti-6Al4v
Screws - Hex Head - Set - Titanium Ti-Gr5-Ti-6Al4v

Search Rating: 32%

Also see combined categories:
All Hex Head Screws

Fully threaded hex head set screws (DIN933). Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Din 933. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Screws - Hex Head Slotted - Nylon
Screws - Hex Head Slotted - Nylon

Search Rating: 32%

Also see combined categories:
All Hex Head Screws
All Plastic Screws

UNC - UNF

Related Information:

Screws - Hex Head - Titanium CP Grade 1
Screws - Hex Head - Titanium CP Grade 1

Search Rating: 32%

Also see combined categories:
All Hex Head Screws

Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

Screws - Hex Washer Head - Black Nylon
Screws - Hex Washer Head - Black Nylon

Search Rating: 32%

Also see combined categories:
All Machine Screws
All Plastic Screws

1/4 UNC and UNF only

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:

Screws Self Tapping

TopHide Pictures

Screws - Self Drilling - Hex Head - With Washers
Screws - Self Drilling - Hex Head - With Washers

Search Rating: 32%

Also see combined categories:
All Self Drilling Screws

With bonded neoprene washer. Galvanised for corrosion resistance.


Knobs Knurled

TopHide Pictures

Knobs - Knurled - Torque - Male
Knobs - Knurled - Torque - Male

Search Rating: 32%

Also see combined categories:
All Knurled Knobs
All Knobs

Plastic (high grade gloss black phenolic) or Black ABS Plastic head. Zinc plated steel thread.


Latches Adjustable

TopHide Pictures

Latches - Adjustable Grip - Miniature
Latches - Adjustable Grip - Miniature

Search Rating: 32%

Rugged construction. Single hole installation. Made from zinc plated steel.

Max working load 15kg. Ultimate load 40kg. Choice of black nylon head or low profile slotted head.


Latches Other

TopHide Pictures

Latches - Spring - Knob Style
Latches - Spring - Knob Style

Search Rating: 31%

Smooth latching action. Camming action of spring pawl provides wide grip ranges. Black nylon with stainless steel spring. Hosuing is bright chromate zinc alloy plated steel with sealer. Designed to be riveted or screwed in place.


Ball Screw Accessories

TopHide Pictures

Mounts - Universal - For Acme Thread and Ballscrews
Mounts - Universal - For Acme Thread and Ballscrews

Search Rating: 30%

Use grade 8 hex socket head cap screws for mounting.


Latches Handle

TopHide Pictures

Handles - Latching - 2-Point Locking Rod Kit
Handles - Latching - 2-Point Locking Rod Kit

Search Rating: 29%

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Wood - Hex Drive
Inserts - Self Tapping - For Wood - Hex Drive

Search Rating: 29%

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.


Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Search Rating: 29%

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.


Adjusters

TopHide Pictures

Adjusters - Rigid
Adjusters - Rigid

Search Rating: 27%

Also see combined categories:
All Mounting Feet

Adjustable supports for all kinds of machinery.

Mild steel bright zinc plated. Screwdriver cross recess in base. Use as mounting feet.

Related Information:

Washers Finishing

TopHide Pictures

Washers - Cup - Steel - Nickel Plated
Washers - Cup - Steel - Nickel Plated

Search Rating: 27%

Also see combined categories:
All Cup Washers

Countersunk washers for use with screws for decorative finishing


Screws Thumb

TopHide Pictures

Screws - Thumb - Wing - Steel
Screws - Thumb - Wing - Steel

Search Rating: 27%

Also see combined categories:
All Thumb Screws


Screws Shoulder

TopHide Pictures

Screws - Shoulder - Jig and Fixture - Steel
Screws - Shoulder - Jig and Fixture - Steel

Search Rating: 27%

Also see combined categories:
All Shoulder Screws

Used in construction of tool, jig and fixture work. 4140L heat treated steel with black oxide finish.

Also known as stripper bolts.


Hooks

TopHide Pictures

Shackles - Anchor - Screw Pin - Steel
Shackles - Anchor - Screw Pin - Steel

Search Rating: 27%

Also see combined categories:
All Shackles

Forged carbon steel, self coloured.


Snap Buttons

TopHide Pictures

Snap Buttons - Double End
Snap Buttons - Double End

Search Rating: 27%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Flat Type
Snap Buttons - Flat Type

Search Rating: 27%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Screws Thumb

TopHide Pictures

Screws - Thumb - Shoulder
Screws - Thumb - Shoulder

Search Rating: 27%

Also see combined categories:
All Thumb Screws

303 Stainless Steel


Pins Pull

TopHide Pictures

Pins - Pull - Threaded End - Steel
Pins - Pull - Threaded End - Steel

Search Rating: 26%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.


Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Search Rating: 26%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Acetal Tipped - Alloy Steel
Socket Set Screws - Acetal Tipped - Alloy Steel

Search Rating: 26%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Acetal Tipped - Stainless Steel
Socket Set Screws - Acetal Tipped - Stainless Steel

Search Rating: 26%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Brass Tipped - Alloy Steel
Socket Set Screws - Brass Tipped - Alloy Steel

Search Rating: 26%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Socket Set Screws - Brass Tipped - Stainless Steel
Socket Set Screws - Brass Tipped - Stainless Steel

Search Rating: 26%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.

Related Information:

Socket Set Screws - Dog Point - Carbon Steel
Socket Set Screws - Dog Point - Carbon Steel

Search Rating: 26%

Also see combined categories:
All Dog Point Grub Screws
All Grub Screws

Dog point grub screws

Related Information:

Socket Set Screws - Nylon Tipped - Alloy Steel
Socket Set Screws - Nylon Tipped - Alloy Steel

Search Rating: 26%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.

Related Information:

Socket Set Screws - Oval Tip - Alloy Steel
Socket Set Screws - Oval Tip - Alloy Steel

Search Rating: 26%

Also see combined categories:
All Grub Screws

Related Information:

Socket Set Screws - Solder Tipped - Stainless Steel
Socket Set Screws - Solder Tipped - Stainless Steel

Search Rating: 26%

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.

Related Information:

Hooks

TopHide Pictures

Shackles - Anchor - Screw Pin - 316 Stainless Steel
Shackles - Anchor - Screw Pin - 316 Stainless Steel

Search Rating: 26%

Also see combined categories:
All Shackles

Meets US Federal specification RRC-271D Type IV


Screws Grub (Socket Set)

TopHide Pictures

Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916

Search Rating: 26%

Also see combined categories:
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.

Related Information:

Socket Set Screws - Diamond Knurled Tip - Carbon Steel
Socket Set Screws - Diamond Knurled Tip - Carbon Steel

Search Rating: 26%

Also see combined categories:
All Diamond Knurled Tip Grub Screws
All Grub Screws

Grub screws that grip rough shafts.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124193 products in 3081 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.