Catalogue Index - Categories beginning with S
|
Safety Channel |  |
Mounts - Vibration - Safety Channel
|
Sapphire Balls |  |
Balls - Sapphire - Synthetic
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
|
Scale Bearings |  |
Bearings - Precision Scale
Bearings for scales.
|
Screw Actuators - Rotating |  |
Actuators - Screw - Rotating - Screwjack - Size 10 and 14
Precision linear adjustment.
|
Actuators - Screw - Rotating - Screwjack - Size 16
Precision linear adjustment.
|
Actuators - Screw - Rotating - Screwjack - Size 19
Precision linear adjustment.
|
Actuators - Screw - Rotating - Screwjack - Size 25
Precision linear adjustment.
|
Screw Actuators - Translating |  |
Actuators - Screw - Translating - Clevis End
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 10 and 14
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 16
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 19
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 25
Precision linear adjustment.
|
Screw Adjusters |  |
Adjusters - Rigid
Adjustable supports for all kinds of machinery.
|
Adjusters - Tilt
Adjustable supports for all kinds of machinery.
|
Screw Extractors |  |
Tools - Screw Extractors
The quick and easy way to remove broken screws, bolts, pipes and studs.
|
Screw Insulators |  |
Insulators - Screw
|
Screw Jacks |  |
Actuators - Screw - Rotating - Screwjack - Size 10 and 14
Precision linear adjustment.
|
Actuators - Screw - Rotating - Screwjack - Size 16
Precision linear adjustment.
|
Actuators - Screw - Rotating - Screwjack - Size 19
Precision linear adjustment.
|
Actuators - Screw - Rotating - Screwjack - Size 25
Precision linear adjustment.
|
Actuators - Screw - Translating - Clevis End
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 10 and 14
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 16
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 19
Precision linear adjustment.
|
Actuators - Screw - Translating - Screwjack - Size 25
Precision linear adjustment.
|
Actuators - Screw - Translating - Top Plate
Precision linear adjustment.
|
Screw Lock -tm- Sealant |  |
Adhesives and Sealants - Threadlockers
ZAP, Molytec, Loctite, Pacer. Pipe sealant, low to high strength threadlockers. Hydraulic threadlocker. Wick-In. Stops threads loosening from vibration.
|
Screw Type Gear Clamps |  |
Clamps - Gear - Screw Type
Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.
|
Screwdrivers |  |
Tools - Screwdrivers
A range of micro screwdrivers and ball end allen keys
|
Screws - Ball |  |
Screws - Ball - 16mm Diameter
16mm Diameter with pitches 2.5 to 20mm. Machined or unmachined ends. Nuts sold seperately.
Material : Cf53 induction hardened to HRC 62 (=/- 2). Pitch accuracy : <= 0.1mm / 300mm ISO class 7. Nuts sold seperately.
|
Screws - Ball - 16mm Housing - Base Type
Use with bush type ball nuts.
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Housing - Flanged
Use with bush type ball nuts.
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Nuts - Bush Type
Antibacklash. Repeatability <0.01mm, accuracy <0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.
|
Screws - Ball - 16mm Nuts - Pillow Block
Includes ball nut.
Antibacklash. Repeatability 0.01mm, accuracy 0.1mm/300mm when used with our 16mm screws. Hardened ground and polished Cf53 steel to HRC62 +/-2. Balls hardened HRC63 +/- 2.
|
Screws - Ball - Economy - Rolled - Nut Only
Match with screw. Accuracy T7 50µm/300mm.
Steel 16 MnCr5 or 100Cr6. Size, length of screw and end bearing configurations will affect the resulting loads and speeds. Backlash 0.01 Percent of lead. Accuracy T7 50µm/300mm. Blank sleeve supplied in nut to retain balls. Do not remove without simultaneous assembly to screw.
|
Screws - Ball - Economy - Rolled - Screw Only
Match with nut. Accuracy T7 50µm/300mm.
Longer lengths available on request (up to 5600mm). Steel Cf53 or Cf60 induction hardened and polished. Running trach hardened to 60 HRC. Profile: Gothic type rolled. Accuracy T7 50µm/300mm.
|
Screws - Ball - Precision - Miniature
Myonic precision ballscrew and nut assemblies.
Ground thread. Low starting and running torque. Backlash of only a few microns, optional zero backlash or preload of nuts.
|
Screws - Ball - Precision - Rolled
With pre-loaded (0.02CA) Nut (Cp5 23um/300mm).
All steel construction except end wipers in Nitrile Rubber. Single nut according to DIN 69051 (1989) with flange form B. Max. running temperature 80°C. Preload by ball selection (G0 pre-loaded) Fao = 0.02Ca. Precision accuracy Cp5 23µm/300mm ISO 3408-3.
|
Screws - Ball - Supports |  |
Supports - Ballscrew - Rigid
Incorporates Angular Contact Bearings.
|
Supports - Ballscrew - Simple
Incorporates Radial Ball Bearings.
|
Screws - Ball Plungers |  |
Plungers - Spring - Threaded
|
Screws - Cap |  |
Screws - Socket - Button - Alloy Steel
UNC - UNF - METRIC.
|
Screws - Socket - Cap - Alloy Steel
UNC - UNF - METRIC - Alloy Steel.
|
Screws - Socket - Cap - Alloy Steel - Assortment Kit
|
Screws - Socket - Cap - Aluminium
Variety of colours available.
|
Screws - Socket - Cap - Molybdenum Disulphide Coated
UNC - UNF - METRIC.
|
Screws - Socket - Cap - Nylon
UNC - UNF - METRIC - Non Conductive - Non Magnetic.
|
Screws - Socket - Cap - Stainless
UNC - UNF - METRIC - Stainless Steel.
|
Screws - Socket - Cap - Titanium
METRIC. CP Grade 1.
|
Screws - Socket - Cap - Zinc Plated
UNC - UNF - METRIC - Alloy Steel.
|
Screws - Socket - Countersunk - Steel
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel - Stainless Steel.
|
Screws - Countersunk |  |
Screws - Machine - Steel - Countersunk Head
Flat Head Countersunk UNC - UNF - BA - METRIC - Zinc Plated - Brass and Plain - Various Head Types.
|
Screws - Socket - Countersunk - Steel
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel - Stainless Steel.
|
Screws - Grub - Specialty |  |
Socket Set Screws - Acetal Tipped
|
Socket Set Screws - Brass Tipped
|
Socket Set Screws - Cone Point
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Socket Set Screws - Rolling Ball Tip
|
Socket Set Screws - Solder Tipped
|
Screws - Grub - Standard |  |
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Screws - Hex Head |  |
Screws - Hex Head - Flanged - Titanium Grade 5
6AL-4V (Grade 5) High strength titanium alloy.
6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Flanged Hexagon Head - hot forged and machined head with rolled thread. Grade 2 Titanium available made to order, also other fastener shapes.
|
Screws - Hex Head - Plastic
UNC - UNF - METRIC - Nylon and PVC.
|
Screws - Hex Head - Steel
UNC - UNF - METRIC - Bolts and Set Screws.
|
Screws - Hex Head - Titanium Grade 1
Fully threaded hex head screws (DIN933)
CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Din 933.
|
Screws - Hobby |  |
Hobby Screws - Countersunk Head
A small selection of popular sizes.
|
Hobby Screws - Pan Head
A small selection of popular sizes.
|
Hobby Screws - Socket Button Head
A small selection of popular sizes.
|
Hobby Screws - Socket Cap
A small selection of popular sizes.
|
Screws - Large Shallow Head |  |
Screws - Large Shallow Head
UNC - UNF - METRIC - Various Materials.
|
Screws - Lead - Actuators |  |
Actuator - Leadscrew - High Duty
|
Actuator - Leadscrew - Light Duty
|
Actuator - Leadscrew - Low Profile
|
Actuator - Leadscrew - Medium Duty
|
Actuator - Leadscrew - Nuts
|
Screws - Lead - Assemblies |  |
Leadscrews - Precision Assemblies - Anti-Backlash
Utilises a patented self-lubricating polyacetal nut radially preloaded on a 303 stainless screw.
|
Leadscrews - Precision Assemblies - General Purpose
|
Leadscrews - Precision Assemblies - High Backlash
|
Screws - Lead - Component Parts |  |
Leadscrew Nuts - Trapezoidal - Flanged - Bronze
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Flanged - Plastic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Hexagonal - Metallic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Round - Metallic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Round - Plastic - Nylon 6.6
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Square - Metallic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrews - Trapezoidal - Rolled
Use with trapezoidal nuts listed in separate category.
|
Leadscrews - Trapezoidal - Whirled
Use with trapezoidal nuts listed in separate category.
|
Screws - Locking Bolts |  |
Bolts - Locking
|
Screws - Machine |  |
Screws - Machine - Aluminium
Metal Thread Screws UNC.
Nuts sold separately - See Fasteners - Nuts.
|
Screws - Machine - Nylon
UNC / UNF / Limited Metric Range.
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
|
Screws - Machine - Stainless Steel
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Steel
Metal Thread Screws UNC - UNF - BA - METRIC - Zinc Plated - Brass and Plain - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Titanium CP1
Metal Thread Screws - Metric. CP Grade 1 Titanium.
Nuts sold seperately - See Nuts. CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250.
|
Screws - Machine - Countersunk |  |
Screws - Machine - Nylon - Countersunk Head
Flat Head Countersunk UNC and UNF.
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
|
Screws - Machine - Stainless Steel - Countersunk Head
Flat Head Countersunk UNC - UNF - METRIC.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Steel - Countersunk Head
Flat Head Countersunk UNC - UNF - BA - METRIC - Zinc Plated - Brass and Plain - Various Head Types.
Nuts sold seperately - See Nuts.
|
Screws - Machine - Titanium CP1 - Countersunk Head
Flat Head Countersunk. CP Grade 1 Titanium.
Nuts sold seperately - See Nuts. CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250.
|
Screws - Nylon |  |
Screws - Hex Head - Plastic
UNC - UNF - METRIC - Nylon and PVC.
|
Screws - Machine - Nylon
UNC / UNF / Limited Metric Range.
|
Screws - Machine - Nylon - Countersunk Head
Flat Head Countersunk UNC and UNF.
|
Screws - Socket - Cap - Nylon
UNC - UNF - METRIC - Non Conductive - Non Magnetic.
|
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Threaded Rod - Plastic
UNC - UNF - METRIC - Nylon and PVC.
|
Screws - Phillips Head |  |
Screws - Machine - Nylon
UNC / UNF / Limited Metric Range.
|
Screws - Machine - Stainless Steel
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
|
Screws - Machine - Stainless Steel - Countersunk Head
Flat Head Countersunk UNC - UNF - METRIC.
|
Screws - Machine - Steel
Metal Thread Screws UNC - UNF - BA - METRIC - Zinc Plated - Brass and Plain - Pan, cheese, fillister and round head.
|
Screws - Pozidrive |  |
Screws - Machine - Stainless Steel
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
|
Screws - Machine - Steel
Metal Thread Screws UNC - UNF - BA - METRIC - Zinc Plated - Brass and Plain - Pan, cheese, fillister and round head.
|
Screws - Security |  |
Screws - Security - Socket - Button
Use special tool listed under Screws - Securty - Socket - Tools.
|
Screws - Security - Socket - Countersunk
Use special tool listed under Screws - Securty - Socket - Tools.
|
Screws - Security - Socket - Tools
Only available to users of the Socket Type Security Screws.
Used for hex socket security screws.
|
Screws - Security - Two Hole - Countersunk
Use special tool listed under Screws - Securty - Two Hole - Tools.
|
Screws - Security - Two Hole - Pan Head
Use special tool listed under Screws - Securty - Two Hole - Tools.
|
Screws - Security - Two Hole - Tools
Only available to users of the Two Hole Type Security Screws.
Used for two hole security screws.
|
Screws - Self Tapping |  |
Screws - Self Tapping - Countersunk Head
Countersunk screws length includes head. ie, the full overall length of the screw.
|
Screws - Self Tapping - Pan Head
Type AB Steel Self Tapping Screws.
Length is from the tip of the screw to the base of the head. Ie, does not include the head.
|
Screws - Set |  |
Socket Set Screws - Cone Point
|
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Screws - Set - Nylon Tipped |  |
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Screws - Shoulder |  |
Screws - Shoulder - Philips Head
|
Screws - Shoulder - Slotted Head
|
Screws - Shoulder - Socket Head
|
Screws - Slotted Head |  |
Screws - Large Shallow Head
UNC - UNF - METRIC - Various Materials.
|
Screws - Machine - Nylon
UNC / UNF / Limited Metric Range.
|
Screws - Machine - Nylon - Countersunk Head
Flat Head Countersunk UNC and UNF.
|
Screws - Shoulder - Slotted Head
|
Screws - Socket - Button Head |  |
Hobby Screws - Socket Button Head
A small selection of popular sizes.
|
Screws - Socket - Button - Alloy Steel
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
|
Screws - Socket - Button - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.
|
Screws - Socket - Button - Stainless Steel
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
|
Screws - Socket - Button - Zinc Plated
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
|
Screws - Socket - Cap Head |  |
Hobby Screws - Socket Cap
A small selection of popular sizes.
|
Screws - Socket - Cap - Alloy Steel
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Alloy Steel - Assortment Kit
Alloy steel - black oxide finish. 18 popular imperial sizes - 360 pieces.
|
Screws - Socket - Cap - Aluminium
Variety of colours available.
Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Molybdenum Disulphide Coated
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Nylon
UNC - UNF - METRIC - Non Conductive - Non Magnetic.
|
Screws - Socket - Cap - Stainless
UNC - UNF - METRIC - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Titanium
METRIC. CP Grade 1.
CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Metric Sizes to DIN912.
|
Screws - Socket - Cap - Zinc Plated
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
|
Screws - Socket - Low Head
UNC - UNF - METRIC - Alloy Steel.
|
Screws - Socket - Countersunk - Steel |  |
Screws - Socket - Countersunk - Aluminium
Flat Head Countersunk UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991.
|
Screws - Socket - Countersunk - Stainless Steel
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991.
|
Screws - Socket - Countersunk - Steel
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel - Stainless Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991.
|
Screws - Socket - Countersunk Head |  |
Hobby Screws - Socket Countersunk
A small selection of popular sizes.
|
Screws - Socket - Flat Head - CSK |  |
Screws - Socket - Countersunk - Steel
Flat Head Countersunk UNC - UNF - METRIC - Alloy Steel - Stainless Steel.
|
Screws - Socket - Low Head |  |
Screws - Socket - Low Head
UNC - UNF - METRIC - Alloy Steel.
|
Screws - Socket - Tapered Head - Titanium |  |
Screws - Socket - Tapered Head - Titanium
6AL-4V (Grade 5) High strength titanium alloy.
6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Hot forged with rolled thread.
|
Screws - Socket Set |  |
Socket Set Screws - Cone Point
|
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Screws - Socket Set - Specialty |  |
Socket Set Screws - Acetal Tipped
|
Socket Set Screws - Brass Tipped
|
Socket Set Screws - Cone Point
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Socket Set Screws - Rolling Ball Tip
|
Socket Set Screws - Solder Tipped
|
Screws - Socket Set - Standard |  |
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Screws - Threaded Rod |  |
Threaded Rod - Aluminium
UNC and UNF light weight aluminium.
|
Threaded Rod - Brass
UNC - UNF - METRIC brass.
|
Threaded Rod - Plastic
UNC - UNF - METRIC - Nylon and PVC.
|
Threaded Rod - Stainless Steel
UNC - UNF - METRIC - 303, 304 and 316 grades.
|
Threaded Rod - Steel
UNC - UNF - METRIC - BSW - Includes plain and zinc plated, mild steel and high tensile.
|
Screws - Thumb |  |
Screws - Thumb
Steel, stainless and nylon.
|
Screws - Thumb - Captive
Brass.
Slotted Knurled Head.
|
Screws and Nuts - Lead |  |
Leadscrew Nuts - Trapezoidal - Flanged - Bronze
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Flanged - Plastic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Hexagonal - Metallic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Round - Metallic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Round - Plastic - Iglidur W300
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Round - Plastic - Nylon 6.6
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrew Nuts - Trapezoidal - Square - Metallic
Use with trapezoidal leadscrews listed in separate category.
|
Leadscrews - Precision Assemblies - Anti-Backlash
Utilises a patented self-lubricating polyacetal nut radially preloaded on a 303 stainless screw.
|
Leadscrews - Precision Assemblies - General Purpose
|
Leadscrews - Precision Assemblies - High Backlash
|
Leadscrews - Trapezoidal - Rolled
Use with trapezoidal nuts listed in separate category.
|
Leadscrews - Trapezoidal - Whirled
Use with trapezoidal nuts listed in separate category.
|
Screws with Knobs |  |
Knobs - Thumb - With Cap Screw
Four types and four colours.
|
Sealants |  |
Adhesives and Sealants - General
Molytec, Loctite, Pacer, Dow Corning, 3M. Includes silicone sealant, gasket adhesive, canopy glue, belt conditioner and electronic tak-pak.
|
Adhesives and Sealants - Retaining
Molytec and Loctite. Includes Quickmetal. High and medium retaining for bearings, bushes, gears, pulleys and sprockets.
|
Adhesives and Sealants - Threadlockers
ZAP, Molytec, Loctite, Pacer. Pipe sealant, low to high strength threadlockers. Hydraulic threadlocker. Wick-In. Stops threads loosening from vibration.
|
Sealed Stroke Rotary Bushings |  |
Bushings - Stroke Rotary - Sealed
Stroke Rotary Bushing series can operate in both linear and rotary directions at the same time.
|
Sealing Plugs |  |
Sealing Plugs - Stainless
The sealing plug is a safe, quick, leakproof and low cost method for sealing cross-drilled holes. It ensures peak performance with a comfortable safety margin even in extreme applications.
Sleeve: Stainless Steel DIN 1.4305, AISI 303 Ball: Bearing Steel, Heat Treated Hardness: HB = 220
|
Seals |  |
Oil Seals - Fluoroelastomer Rubber
DIN 3760 - High Temperature and chemical resistance.
|
Oil Seals - Nitrile Rubber
DIN 3760 - General purpose grease and oil sealing.
|
O-Rings - Cord
Nitrile and Fluoroelastomer continuous length o-ring cord.
|
O-Rings - Dental
Special Orings for Dental Applications.
|
O-Rings - EPDM Rubber
Suitable for heated water and steam.
|
O-Rings - Fluoroelastomer
High temperature and chemical resistance.
|
O-Rings - Neoprene Rubber
Excellent resistance to ageing and weathering effects.
|
O-Rings - Nitrile Rubber
General purpose.
|
O-Rings - Silicone Rubber
High thermal resistance and cold flexibility.
|
V-Rings - Fluoroelastomer
VA Profile - High Temperature V Rings.
|
V-Rings - Nitrile
VA Profile - Nitrile V Rings.
|
Security Screws |  |
Screws - Security - Socket - Button
|
Screws - Security - Socket - Countersunk
|
Screws - Security - Socket - Tools
Only available to users of the Socket Type Security Screws.
|
Screws - Security - Two Hole - Countersunk
|
Screws - Security - Two Hole - Pan Head
|
Screws - Security - Two Hole - Tools
Only available to users of the Two Hole Type Security Screws.
|
Self Aligning Double Row Ball Bearings |  |
Bearings - Ball - Double Row - Self Aligning
|
Self Seating Thrust Bearings |  |
Bearings - Thrust - Plastic - Self Seating
|
Washers - Self Aligning
|
Self Seating Washers |  |
Bearings - Thrust - Plastic - Self Seating
|
Washers - Self Aligning
|
Self Tapping Screws |  |
Screws - Self Tapping - Countersunk Head
|
Screws - Self Tapping - Pan Head
Type AB Steel Self Tapping Screws.
|
Sensors |  |
Sensor - Ultrasonic - For Brakes
For maintaining constant tension when using a brake for producing unwind tension.
Also used when using a clutch for rewind tension. When target is within range the LED Status Indicator glows continuously. Uses Power Supply S90MPS-24 (See category - Power Supplies). Sensor measures diameter of the roll and sends a 0-10V DC signal to power supply. Torque is automatically varied as roll size changes to keep constant tension.
|
Solarbotics Sensors
|
Series L Reinforced Design Power Gearbox |  |
Gearboxes - Power - Series L Reinforced Design
VX.L Series.
|
Servomotors |  |
Servomotors - Nema Size 23 - Brush Type
|
Servomotors - Nema Size 23 - Brush Type - With Brake
|
Servomotors - Nema Size 34 - Brush Type
|
Set Screw Shaft Collars |  |
Collars - Shaft - Standard
Includes miniature precision types. Carbon steel, 303 and 316 stainless.
|
Set Screws - Socket Head - Specialty |  |
Socket Set Screws - Acetal Tipped
|
Socket Set Screws - Brass Tipped
|
Socket Set Screws - Cone Point
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Socket Set Screws - Rolling Ball Tip
|
Socket Set Screws - Solder Tipped
|
Set Screws - Socket Head - Standard |  |
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Shaft Assortments - 3mm Dia |  |
Assortment Kits - Various
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins
|
Shaft Clamps |  |
Clamps - Shaft
|
Shaft Collars |  |
Collars - Shaft - Clamp Type
|
Collars - Shaft - D-Bore
|
Collars - Shaft - Fairloc
|
Collars - Shaft - Gripfast
Self Locking - Quick Release.
|
Collars - Shaft - Hinged Type
Precision machined. Convenient easy-to-assemble design.
|
Collars - Shaft - Standard
Includes miniature precision types. Carbon steel, 303 and 316 stainless.
|
Collars - Shaft - Stroke Adjustment
|
Collars - Shaft - With Integral Shim
|
Shaft Couplings |  |
Couplings - Ball
High Speed - Up to 15 Degrees Angular Offset. 0.17 to 22.6 N.m Torque. Up to 20,000 rpm.
|
Couplings - Bantam - Components
Isolates vibration up to 85%. Sleeve provides electrical insulation. 0.21Nm at 1725rpm.
|
Couplings - Bellows
Zero Backlash - Constant Velocity Ratio - Low Inertia. 0.85 to 2.0 Nm. 2000 to 20,000rpm.
|
Couplings - Bellows - Hiflex
Precise adjustment - Vibration resistance - Large misalignment capability. 0.01 to 9.17 Nm. 2000 rpm.
|
Couplings - BoWex - Junior
Nylon 2 piece and 3 piece couplings. 5 to 24 Nm. 6000 rpm max.
|
Couplings - Clutch - Flange Mounted
0.565 to 14 N.m. For in-line loads.
|
Couplings - Control Flex. 0.45 to 6.44 Nm.
|
Couplings - Cross Joint. 0.5 to 10 N.m. 3600 to 6000 rpm.
|
Couplings - Double Disk. 0.7 to 12.5 Nm. 3000 to 19000 rpm.
Zero Backlash - High Torsional Stiffness.
|
Couplings - Flexible-Shaft Type
Nonmagnetic flexible shaft couplings. Max torque 0.39 Nm.
|
Couplings - Geargrip
0.67 to 6.78 Nm. Max speed 3000 rpm.
|
Couplings - Helical - Standard
0.1 to 16.2 Nm.
|
Couplings - Jaw Type - With Rubber Spider
Max 3600 RPM. 0.39 to 16.27 Nm.
|
Couplings - K Type
Up to 3600 RPM - Minus 20 to Plus 60 Degrees C. 0.34 to 18 Nm.
|
Couplings - Neo-Flex
0.71 to 1.27 Nm.
|
Couplings - Oldham - Complete
0.06 to 44 Nm. Max Speed: 3000 RPM.
|
Couplings - Rigid
0.35 to 5.1 Nm.
|
Couplings - Single Disk
0.7 to 19 Nm. 2400 to 10000 rpm.
|
Couplings - Sleeve Type
0.05 to 2.1 Nm. Max Speed 1750 rpm.
|
Couplings - Slip - Spring Wrapped
Tension control - transmission overload protection. 0.035 to 1.69 Nm.
|
Couplings - Slit Type
Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.
|
Couplings - Spider Type
2.1 to 17 Nm.
|
Couplings - Spline Type
0.5 to 4.5 Nm. 12000 to 24000 rpm.
|
Couplings - Spring
1.4 Nm Max Torque.
|
Couplings - Torque Tube
Internal compression spring preloads the ends against axial movement and backlash. Up to 2.8 Nm. Up to 2000 rpm.
|
Couplings - Uniflex
High speed to 30000 rpm. 2.3 to 9.27 Nm.
|
Shaft Extenders |  |
Extenders - Shaft
Miniature and large shaft extenders.
|
Shaft Locks |  |
Shaft Locks - Potentiometer
|
Shaft Mounted Clutches |  |
Clutches - Shaft Mounted
24 V DC - Zero Backlash Armature - For parallel loads.
|
Couplings - Clutch - Shaft Mounted
0.565 to 14 N.m. For in-line loads.
|
Shaft Reducers |  |
Extenders - Shaft
Miniature and large shaft extenders.
|
Reducers - Bore
Inch to Metric / Inch to Inch / Metric to Metric.
|
Shaft Spacers |  |
Sleeves - Hex Hole
|
Sleeves - Square Hole - Plain
|
Spacers - Hex - Threaded - Nylon
Threaded Hex Spacers.
|
Spacers - Round - Through Bore - Aluminium
Shaft spacers - Aluminium
|
Spacers - Square - Threaded
Threaded spacers.
|
Standoffs - Hexagonal
Swage Type - Threaded - Brass or Stainless Steel.
|
Standoffs - Round
Swage Type - Threaded - Brass or Stainless Steel.
|
Washers - Flat - Commercial - All Types
Includes all materials listed in other commercial washer categories.
|
Shaft Supports |  |
Shafting - Rail Supports - With Shaft
Includes shaft.
Includes shaft to h6 tolerances.
|
Shafting - Rail Supports - Without Shaft
For mounting of shafting.
Shafting sold separately.
|
Shafting - Supports - Block
For linear shafting.
Material: Aluminium.
|
Shafting - Supports - Flanged Four Bolt
For linear shafting.
Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.
|
Shafting - Supports - Flanged Two Bolt
For linear shafting.
Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.
|
Shafting - Supports - Pedestal Two Bolt
For linear shafting.
Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.
|
Shafting |  |
Rod - Drill
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
|
Rod - Round - Acetal
Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Aluminium
For general hobby applications.
|
Rod - Round - Brass
For general hobby applications.
|
Rod - Round - Bronze - 686 Manganese
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Bronze - 954 Aluminium
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Bronze - LG2 (Standard)
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Bronze - PB1
Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Nylon
High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Polyester PETP
High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - PTFE
Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Rod - Round - Sintered Bronze
Sintered bronze is supplied oversized so it can be machine finished to the dimensions shown.
|
Rod - Round - Stainless Steel
For general hobby applications.
|
Rod - Round - Urethane
|
Shafts - Flexible - Coupling Ends - Cased
|
Shafts - Flexible - Coupling Ends - Open (Ondrives)
|
Shafts - Flexible - Coupling Ends - Open (SDP)
Flexible shafting with coupling ends ready to attach to a fixed shaft.
|
Shafts - Flexible - Panel Mount - Cased
|
Shafts - Flexible - Panel Mount - Open
|
Shafts - Pinion
|
Shafting - Aluminium |  |
Shafting - Aluminium
Drylin aluminium shafting is recommended for use with Igubal Drylin bearings only.
Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: >40µm. Surface Hardness: 450-550 HV. Roughness: Ra<0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.
|
Shafting - Ground |  |
Shafting - Ground
Precision ground shafting. Various materials including silver steel, 303 304 316 416 stainless steel, hardened chrome steel.
|
Shafting - Hobby |  |
Hobby Shafting - Precision Ground
A small selection of popular sizes.
|
Shafting - Pipe - AISI52100 Steel |  |
Shafting - Pipe - AISI52100 Steel
AISI 52100 Steel Hardened to HRC 58-62. Straightness 0.0003 mm / mm. Ideal for design weight reduction. Note! ID of pipe shaft may be up to 1mm undersize. Other lengths may be available on request however a surcharge for special sizing will apply and extended delivery times can be expected (if available).
|
Shafting - Pipe - Aluminium |  |
Shafting - Pipe - Aluminium
Recommended for use with Igubal Drylin bearings only.
Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: >40µm. Surface Hardness: 450-550 HV. Roughness: Ra<0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: 2
|
Shafting - Pre Drilled |  |
Shafting - Pre Drilled for Rail Supports
Straightness: 0.1 mm / mtr.
|
Shafting - Rail Supports - With Shaft
Includes shaft.
|
Shafting - Rail Supports - Without Shaft
For mounting of shafting.
|
Shafting - Supported |  |
Shafting - Rail Supports - With Shaft
Includes shaft.
|
Shafting - Supported - Pre-Drilled - Aluminium
For Drylin Bearings.
Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: >40µm. Surface Hardness: 450-550 HV. Roughness: Ra<0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: 2
|
Shaftloc-tm- |  |
Shaftloc-tm Clamp Type A
Simple effective component clamping
Passivated 416 Stainless Steel Simple two part screw together system clamps parts securely together. Vibration resistant. Employing a special asymetric thread to self-lock when the nut encounters resistance. The nut turns freely until it contacts the parts being clamped together. Additional turns wedge the parts into a locked and vibration resistant condition.
|
Shaftloc-tm Simple Type M
Simple effective way to lock components onto shafts.
Passivated 416 Stainless Steel Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened Precision, dynamically balanced and suitable for high speed applications. Diameters A and B concentric within 0.013 T.I.R. Tightening the nut causes slotted sleeve to contract, gripping the shaft and clamping the component to the sleeve.
|
Shaftloc-tm Sleeves - Double Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened
|
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened
|
Shafts |  |
Collars - Shaft - Standard
Includes miniature precision types. Carbon steel, 303 and 316 stainless.
|
Extenders - Shaft
Miniature and large shaft extenders.
|
Rod - Drill
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
|
Shafting - Ground
Precision ground shafting. Various materials including silver steel, 303 304 316 416 stainless steel, hardened chrome steel.
|
Shafting - Pipe - AISI52100 Steel
|
Shafting - Pre Drilled for Rail Supports
|
Shafts - Flexible - Coupling Ends - Cased
|
Shafts - Flexible - Coupling Ends - Open (Ondrives)
|
Shafts - Flexible - Coupling Ends - Open (SDP)
Flexible shafting with coupling ends ready to attach to a fixed shaft.
|
Shafts - Flexible - Panel Mount - Cased
|
Shafts - Flexible - Panel Mount - Open
|
Shafts - Pinion
|
Shafts - Flexible - Coupling End |  |
Shafts - Flexible - Coupling Ends - Cased
See PDF file at bottom of internet page for Performance Data.
|
Shafts - Flexible - Coupling Ends - Open (Ondrives)
Hubs: 220 MO7 / Shaft: Steel.
|
Shafts - Flexible - Coupling Ends - Open (SDP)
Flexible shafting with coupling ends ready to attach to a fixed shaft.
See PDF file at bottom of internet page for Performance Data.
|
Shafts - Flexible - Panel Mount |  |
Shafts - Flexible - Panel Mount - Cased
See PDF file at bottom of internet page for Performance Data.
|
Shafts - Flexible - Panel Mount - Open
See PDF file at bottom of internet page for Performance Data.
|
Shafts - Output - Gearbox |  |
Gearboxes - Output Shafts
For use in Cross Axis gearboxes with bores. P and PF Series.
|
Shafts - Pinion |  |
Shafts - Pinion
|
Shallow Head Screws |  |
Screws - Large Shallow Head
UNC - UNF - METRIC - Various Materials.
|
Sheet |  |
Sheet - Acetal
|
Sheet - Nylon
|
Sheet - Sintered Bronze
|
Sheet - Magnetic |  |
Materials - Magnetic Sheeting
Magnetic sheeting is ideal for making small decorative magnets or for use on vehicles.
|
Sheet - Plastic |  |
Shim - Plastic
Easy to cut - colour coded - plastic shim sheets.
|
Solarbotics Materials
Versatile material for building robots because of its ability to glue well with epoxy and superglue.
|
Shell Type Needle Roller Bearings |  |
Bearings - Needle Roller - Shell Type
|
Shim |  |
Shim - Aluminium
Includes listing on 6061-T6 Aluminium Sheet. Very thin to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
|
Shim - Brass
Brass shim sheet. Very thin to thick sizes. Also one assortment pack listed.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
|
Shim - Copper
Shim sheet. Very thin to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
|
Shim - Plastic
Easy to cut - colour coded - plastic shim sheets.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Made from sturdy polyester.
|
Shim - Stainless Steel
Shim sheet. Very thin to thick sizes. Includes 416, 303 and 316 grades.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
|
Shim - Steel
Shim sheet. Cold rolled steel. Very thin to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
|
Shim - Tin
Shim sheet. Very thin to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications.
|
Shim Washers |  |
Shims - Arbor
Flat arbor shim washers.
|
Spacers - Arbor
Flat arbor shim washers with keyway groove.
|
Washers - Flat - Commercial - All Types
Includes all materials listed in other commercial washer categories.
|
Washers - Flat - Precision - All Types
Includes all materials listed in other precision washer categories.
|
Shims - Arbor |  |
Shims - Arbor
Flat arbor shim washers.
|
Shock Absorbers |  |
Shock Absorbers
Body: Steel with black oxide finish, Stainless Steel or Chrome plated piston rod. Operating Temperature Range: -10°C to +70°C. Important: Provide mechanical stop 0.5mm before end of stroke.
|
Shock Absorbers - Accessories
|
Shoulder Screws |  |
Screws - Shoulder - Philips Head
|
Screws - Shoulder - Slotted Head
|
Screws - Shoulder - Socket Head
|
Shoulder Washers |  |
Washers - Shoulder - Fibre
Fibre (US: fibre) shoulder washers.
|
Washers - Shoulder - Nylon
|
Si 3 N 4 Bearings |  |
Bearings - Ceramic Si3N4
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02.
|
Bearings - Ceramic ZrO2
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed.
|
Sign Making Material - Corflute |  |
Materials - Corflute
Corflute light weight plastic board for sign making or model backgrounds
|
Signage Products |  |
Signage and Display
|
Silicon Nitride Bearings |  |
Balls - Ceramic - Silicon Nitride
Outstanding wear resistance. Good thermal and chemical resistance.
|
Bearings - Ceramic Si3N4
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02.
|
Silicone O-Rings |  |
O-Rings - Silicone Rubber
High thermal resistance and cold flexibility.
|
Silicone Sealants |  |
Adhesives and Sealants - General
Molytec, Loctite, Pacer, Dow Corning, 3M. Includes silicone sealant, gasket adhesive, canopy glue, belt conditioner and electronic tak-pak.
|
Simplex Roller Chain and Sprockets |  |
Chain - Roller - Plastic - Single Row
|
Single Disk Flexible Couplings |  |
Couplings - Single Disk
0.7 to 19 Nm. 2400 to 10000 rpm.
|
Single End Speed Reducers |  |
Gearboxes - Bu-Ord - Size 15 - Single End
SRBO15 Series.
|
Gearboxes - Bu-Ord - Size 18 - Single End
SRBO18 Series.
|
Single Hole Spring Suspension Mounts |  |
Mounts - Spring - Suspension - Single Hole
|
Single Phase Motors - AC |  |
Motors - AC Single Phase - Size 60
|
Single Row Roller Chain |  |
Chain - Roller - Metal - Simplex
Includes Stainless Steel and Miniature Sizes.
|
Chain - Roller - Metal - Simplex - Links
Includes Stainless Steel and Miniature Sizes.
|
Sintered Bronze |  |
Bearings - Press - Sintered Bronze
|
Bearings - Press - Sintered Bronze - Flange Mounted
|
Bushes - Bronze - Sintered - Flanged
Oil impregnated flanged sintered bronze bushes.
|
Bushes - Bronze - Spherical - Sintered
Spherical OD Oil Impregnated Sintered Bronze Bushes.
|
Plates - Bronze - Sintered - Rectangular
SAE 841 Powdered metal bronze bearing plates.
|
Rod - Round - Sintered Bronze
Sintered bronze is supplied oversized so it can be machine finished to the dimensions shown.
|
Tube - Round - Sintered Bronze
Oil impregnated sintered bronze tube - self lubricating.
|
Washers - Flat - Bronze - Precision
Flat washers.
|
Sintered Washers |  |
Washers - Flat - Bronze - Precision
Flat washers.
|
Skate Bearings |  |
Skate Bearings
Bearings for use with skates and skate boards.
|
Sleeve - Shaftloc |  |
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
|
Sleeve Bearings |  |
Bearings - Needle Roller - Inner Rings
Hardened sleeves for needle roller bearings.
|
Bushes - Aluminium - Frelon Lined
Self lubricating - Replaces oilite or plastic bearings.
|
Bushes - Bronze - Sintered - Flanged
Oil impregnated flanged sintered bronze bushes.
|
Bushes - Bronze - Solid
Solid precision LG2 bronze bushes.
|
Bushes - Plastic - Ertalyte TX
Self lubricated, high mechanical strength, stiffness and hardness.
|
Bushes - Plastic - Iglidur A200
Food grade for low speeds and direct contact with food and pharmaceuticals.
|
Bushes - Plastic - Iglidur G
General purpose maintenance free dry running.
|
Bushes - Plastic - Iglidur M250
For impact resistance vibration dampening unclean environments.
|
Bushes - Plastic - Rulon J
|
Bushes - Plastic - T500
High Temperature Minus 100 to Plus 250 Degrees Celcius.
|
Bushes - Steel - PTFE Lined - Split
Similar style to Glacier™ bushes.
|
Sleeve Type Flexible Couplings |  |
Couplings - Sleeve Type
0.05 to 2.1 Nm. Max Speed 1750 rpm.
|
Sleeves |  |
Bearings - Needle Roller - Inner Rings
Hardened sleeves for needle roller bearings.
|
Couplings - Sleeve Type
0.05 to 2.1 Nm. Max Speed 1750 rpm.
|
Sleeves - Hex Hole
|
Sleeves - Square Hole - Plain
|
Sleeves - Square Hole - Threaded
|
Sleeves - Hardened for needle roller bearings |  |
Bearings - Needle Roller - Inner Rings
Hardened sleeves for needle roller bearings.
|
Slides - Linear |  |
Slides - Linear - Clean Room
Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100°C (Continuous), +140°C (Maximum). Life will be less than normal at +100°C and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.
|
Slides - Linear - Non Recirculating Ball - Rack and Pinion
Slides: Stainless Steel End Stop, Retainer, Rack and Pinion: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100°C (Constant), +120°C (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.
|
Slides - Linear - Non Recirculating Ball - Standard
The BSP precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100°C (Constant), +120°C (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants.
|
Slides - Linear - Recirculating Ball - Standard
The BSR precision Linear Slide series is a lightweight and compact linear motion rolling guide made of stainless steel formed precisely to be U-shaped table or track rail.
Slides: Stainless Steel End Stop / Retainer: Synthetic Resin. Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100°C (Constant), +120°C (Maximum). Does not incorporate a mechanical stopper. Sensitive to external contaminants. Note BSR1530SL and BSR2040SL can not be mounted from inside of track rail.
|
Slip Clutch Assemblies |  |
Clutch Assemblies - Slip - Precision
Adjustable Torque range 360-3600 g.cm (5-50 oz.in).
|
Slip Clutch Flange Mounting Gears |  |
Gears - Spur - 48 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 64 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 72 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 96 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 120 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Slip Clutches |  |
Clutches - Slip - Inline
Multiplate Design.
|
Clutches - Slip - Inline - Precision
|
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Requires no power.
|
Clutches - Slip - Magnetic Particle - No Power
Requires no power.
|
Clutches - Slip - Spring Wrapped
|
Slip Couplings - Spring Wrapped |  |
Couplings - Slip - Spring Wrapped
Tension control - transmission overload protection. 0.035 to 1.69 Nm.
|
Slit Type Flexible Couplings |  |
Couplings - Helical - Long Series
2.9 to 31.4 Nm.
|
Couplings - Helical - Low Inertia
0.8 to 13.2 Nm.
|
Couplings - Helical - Precision
0.14 to 9 Nm. 25000 max RPM.
|
Couplings - Helical - Standard
0.1 to 16.2 Nm.
|
Couplings - Slit Type
Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.
|
Slotted Head Screws |  |
Screws - Machine - Nylon
UNC / UNF / Limited Metric Range.
|
Screws - Machine - Stainless Steel
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
|
Screws - Machine - Stainless Steel - Countersunk Head
Flat Head Countersunk UNC - UNF - METRIC.
|
Screws - Machine - Steel
Metal Thread Screws UNC - UNF - BA - METRIC - Zinc Plated - Brass and Plain - Pan, cheese, fillister and round head.
|
Screws - Machine - Steel - Countersunk Head
Flat Head Countersunk UNC - UNF - BA - METRIC - Zinc Plated - Brass and Plain - Various Head Types.
|
Screws - Machine - Titanium CP1
Metal Thread Screws - Metric. CP Grade 1 Titanium.
|
Screws - Machine - Titanium CP1 - Countersunk Head
Flat Head Countersunk. CP Grade 1 Titanium.
|
Screws - Shoulder - Slotted Head
|
Small Tools |  |
Tools - Die Holders
Bar and round holders. 16mm, 20.64mm and 25.4mm (inch).
|
Tools - Dies
Tungsten Chrome Alloy - Carbon Steel. Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
|
Tools - Drill Bits
Micro miniature drill bits starting from 0.32mm up to larger standard sizes. Sutton - PN - Bordo.
|
Tools - General
Screw Pitch Gauges - Needle Files - Pin Vises - Gear Gauge - Wire and Tube Benders - Tube Cutters - Hobby Knives - Miniature tap and die set
|
Tools - Keys - Hex
Long and short series allen keys.
|
Tools - Taps
High Speed Steel Short Machine and Carbon Steel Straight Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
|
Snap Rings |  |
Snaprings - External - Basic
Includes series M3200 / SP / ESP / M2400 / SW.
Carbon sping steel. Used to secure bearings.
|
Snaprings - External - Stainless Steel
301 S11/S22 Stainless Steel.
|
Snaprings - Internal - Basic
M2300 / SB / ESB.
Applications include gear systems, securing needle bearings and to act as spacers.
|
Snaprings - Internal - Stainless Steel
301 S11/S22 Stainless Steel.
|
Socket and Ball Joints |  |
Joints - Ball and Socket - In-line
|
Joints - Ball and Socket - Right Angle
|
Studs - Ball - Threaded
|
Socket Button Head Screws |  |
Screws - Socket - Button - Alloy Steel
UNC - UNF - METRIC.
|
Screws - Socket - Button - Aluminium
Variety of colours available.
|
Screws - Socket - Button - Stainless Steel
UNC - UNF - METRIC.
|
Screws - Socket - Button - Zinc Plated
UNC - UNF - METRIC.
|
Socket Head Cap Screws |  |
Screws - Socket - Cap - Alloy Steel
UNC - UNF - METRIC - Alloy Steel.
|
Screws - Socket - Cap - Alloy Steel - Assortment Kit
|
Screws - Socket - Cap - Aluminium
Variety of colours available.
|
Screws - Socket - Cap - Molybdenum Disulphide Coated
UNC - UNF - METRIC.
|
Screws - Socket - Cap - Nylon
UNC - UNF - METRIC - Non Conductive - Non Magnetic.
|
Screws - Socket - Cap - Stainless
UNC - UNF - METRIC - Stainless Steel.
|
Screws - Socket - Cap - Titanium
METRIC. CP Grade 1.
|
Screws - Socket - Cap - Zinc Plated
UNC - UNF - METRIC - Alloy Steel.
|
Screws - Socket - Low Head
UNC - UNF - METRIC - Alloy Steel.
|
Socket Head Set Screws |  |
Plungers - Spring - Threaded
|
Socket Set Screws - Acetal Tipped
|
Socket Set Screws - Brass Tipped
|
Socket Set Screws - Cone Point
|
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Socket Set Screws - Rolling Ball Tip
|
Socket Set Screws - Solder Tipped
|
Socket Head Shoulder Screws |  |
Screws - Shoulder - Socket Head
|
Socket Security Screws |  |
Screws - Security - Socket - Button
|
Screws - Security - Socket - Countersunk
|
Screws - Security - Socket - Tools
Only available to users of the Socket Type Security Screws.
|
Socket Set Screws - Ball Plungers |  |
Plungers - Spring - Threaded
|
Socket Set Screws - Hobby |  |
Hobby Screws - Grub
A selection of popular sizes. Includes alloy steel and stainless steel. UNC - UNF - METRIC.
|
Socket Set Screws - Specialty |  |
Socket Set Screws - Acetal Tipped
|
Socket Set Screws - Brass Tipped
|
Socket Set Screws - Cone Point
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Socket Set Screws - Rolling Ball Tip
|
Socket Set Screws - Solder Tipped
|
Socket Set Screws - Standard |  |
Socket Set Screws - Cup Point - Standard
Includes alloy steel and stainless steel. UNC - UNF - BA - METRIC.
|
Soft Knobs |  |
Knobs - Grip - Soft
|
Solar |  |
SolarToy Vehicles
These vehicles are only available in bulk lots of 50 on an indent basis
Available to resellers in bulk lots of 50 Not available for individual retail sale
|
Solarbotics Kits |  |
Solarbotics Kit 2 - Photopopper Photovore 4.2b
A very active solar powered robot. Educational build yourself kits.
Can cover up to a meter (3.3 feet) distance in under 2 minutes. Solar powered, light-sensing directional optics (eyes) and a pair of obstacle avoidance sensors. Directed phototropic or light-seeking behavior - traces outlines around shadows. Everything required is included (high-quality printed circuit board, optics, motors). 12 page instruction manual with over 26 illustrations and images.
|
Solarbotics Kit 3 - Magbot SunDancer Kit
Magbot SunDancer BEAM Butterfly. Educational build yourself kits.
Build a mechanical-looking butterfly or insect that makes an ideal executive desk toy. Works on almost the same circuit as the SolarSpeeder Kit. Slightly more complex. Balances on a stand above a high-intensity magnet - Rocks on a self-induced electromagnetic wind. Silver/gold wings shine and reflect the embossed wing patterns all over the ceiling. Comes with an oak stand and silver/gold mylar wing material.
|
Solarbotics Kit 5 - SolarSpeeder 1.1
The SolarSpeeder 1.1 is a very quick Solaroller. Educational build yourself kits.
Can cover 3 meters (10 feet) in under 40 seconds in direct sunlight. Uses the same updated Solarengine technology found in the PhotoPopper 4.2 Photovore. About 60 mm long when assembled.
|
Solarbotics Kit 9 - The HexPummer Solar Night Strobe
HexPummer Kit A solar-powered, night-activated dazzler. Educational build yourself kits.
Four high-intensity LEDs PUMMM when the lights go out (Turn on STRONG, then slowly fade away).
|
Solarbotics Kit KHM - Herbie the Mousebot
Herbie the Mousebot is a very quick, easy-to-build, light-chasing robot kit with functional whisker and tail sensors! Educational build yourself kits.
|
Solarbotics Kit - Sandwich PCB and Components
Sandwich Robot Kit - Build in conjunction with the book Robot Building for Beginners. Educational build yourself kits.
Complete with all electrical components necessary to build a fully functional Sandwich robot ….. ... (minus the optional DPDT switch and molex headers.). Another item you may want to get is some Sintra (under Materials) to build a base with. We include a printout from the support website that details the construction process. Build in conjunction with the book Robot Building for Beginners.
|
Solarbotics Kit 10 - L293D Secret Motor Driver
Want to turn a servo into a more powerful gear motor?. Educational build yourself kits.
The Secret L293D motor driver kit replaces the guts of a standard servo and turns it into tidy gear motor with a built in motor driver. The SGS Thompson L293D is configured to provide up to 1.2A and 36V ….. …. much higher than what a standard servo electronics are designed for. Don't want to drive a servo? Use the Secret Motor Driver to power any gear motor like the GM2, GM3 or GM4. This kit fits inside a standard SB-GM4 servo body.
|
Solarbotics Kit 11 - The Sumovore Mini-Sumo
A strong Mini- Sumo robot. Educational build yourself kits.
Strong modular design with over 500 man-hours of development and 21 prototypes behind it. More power, speed, and less expensive than the Junun Mark III, Parallax Mini-Sumo and Tab SumoBots. Powerful GM8 gearmotors powered by a robust L293D motor driver. Modular brain boards (discrete brainboard included). Four opto-reflector edge sensors (fifth edge sensor position available when using microprocessor brainboard). Two 38kHz IR emitters and detectors for opponent detection. Requires 6 AA power supply.
|
Solarbotics Kit 12 - Sunswinger Pendulum
Educational build yourself kits.
Powered by string of tiny SCPD cells. The SunSwinger uses the BEAM "force-coil" circuit to make a magnet swing under the arms of an attractive triangular frame. Designed to work primarily from solar energy, but can be powered by batteries or DC power supply.
|
Solarbotics Kit 13 - L298 Compact Motor Driver
Our Compact Motor Driver kit tames the L298 IC and adds useful functionality. Educational build yourself kits.
A popular motor driver IC that is usable from 6 to 50V, at up to 4A total output current. By itself, the IC is somewhat diffcult to wire and use, but the Compact L298 Motor Driver makes it much more convenient to use.
|
Solarbotics Parts |  |
Solar Cells
|
Solarbotics Capacitors
|
Solarbotics Chips - Voltage Detectors
The Panasonic 1381 series of voltage detectors activate at preset voltage levels.
|
Solarbotics Gearmotors
|
Solarbotics Materials
Versatile material for building robots because of its ability to glue well with epoxy and superglue.
Can be easily shaped by immersing in hot water and bending to your desired shape while it cools. Can be easily cut, drilled and threaded for screw fasteners. Do not use black Sintra with solar powered robots as it may get soft on hot days.
|
Solarbotics Miscellaneous
Coils and Trimpot.
|
Solarbotics Motors
|
Solarbotics Parts Bundles
Bundles of useful parts to assist with bicore experiments.
The large bundle includes a complete BEP board.
|
Solarbotics Sensors
|
Solarbotics Wheels
|
Solder |  |
Solder
|
Tools - Soldering Irons
|
Solo Unitised Centrebolt Mounts |  |
Mounts - Vibration - Centre Bolt - Solo Unitised
|
SPA - SPB -SPC -SPP - SPZ Belts |  |
Belts - Vee - 9.7 x 8.0 mm - SPZ
Miniature and small belts. 9.7mm Top Width x 8.0mm Height.
|
Belts - Vee - 12.7 x 10.0 mm - SPA
12.7mm Top Width x 10.0mm Height.
|
Belts - Vee - 16.3 x 13.0 mm - SPB
16.3mm Top Width x 13.0mm Height.
|
Belts - Vee - 22.0 x 18.0 mm - SPC
22.0mm Top Width x 18.0mm Height.
|
Belts - Vee - 25.4 x 22.2 mm - SPP-8V
25.4mm Top Width x 22.2mm Height.
|
Spa Jet Motor Bearings |  |
Spa Jet Motor Many - Check Bearing Dimensions
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
Spacers - Arbor |  |
Spacers - Arbor
Flat arbor shim washers with keyway groove.
|
Spacers - Hex |  |
Pillars - Threaded
|
Sleeves - Hex Hole
|
Spacers - Hex - Threaded - Aluminium
Threaded Hex Spacers.
|
Spacers - Hex - Threaded - Brass
Threaded Hex Spacers.
|
Spacers - Hex - Threaded - Nylon
Threaded Hex Spacers.
|
Spacers - Hex - Threaded - Stainless Steel
Threaded Hex Spacers.
|
Spacers - Hex - Threaded - Steel
Threaded Hex Spacers.
|
Standoffs - Hexagonal
Swage Type - Threaded - Brass or Stainless Steel.
|
Spacers - PCB |  |
Spacers - PCB
Spacers for printed circuit boards
These spacers have a hex in the centre to allow for holding with a spanner whilst tightening. Fix using a 6 or 8 gauge self tapping screw.
|
Spacers - Round |  |
Automat - Frame Kit Spacers
See PDF file in FTP Directory for more information. Educational tool suitable for mechanical teaching institutions.
|
Spacers - Round - Threaded
|
Spacers - Round - Through Bore - Aluminium
Shaft spacers - Aluminium
|
Spacers - Round - Through Bore - Brass
Shaft spacers - Brass
|
Spacers - Round - Through Bore - Nylon
Shaft spacers - Nylon
|
Spacers - Round - Through Bore - Stainless Steel
Shaft spacers - Stainless Steel
|
Spacers - Round - Through Bore - Steel
Shaft spacers - Steel
|
Standoffs - Round
Swage Type - Threaded - Brass or Stainless Steel.
|
Washers - Flat - Commercial - All Types
Includes all materials listed in other commercial washer categories.
|
Spacers - Square |  |
Spacers - Square - Threaded
Threaded spacers.
|
Spacers - Threaded |  |
Spacers - Hex - Threaded - Nylon
Threaded Hex Spacers.
|
Spacers - Round - Threaded
|
Spacers - Square - Threaded
Threaded spacers.
|
Standoffs - Hexagonal
Swage Type - Threaded - Brass or Stainless Steel.
|
Standoffs - Round
Swage Type - Threaded - Brass or Stainless Steel.
|
Spacers - Through Bore |  |
Sleeves - Hex Hole
|
Spacers - Round - Through Bore - Aluminium
Shaft spacers - Aluminium
|
Washers - Flat - Commercial - All Types
Includes all materials listed in other commercial washer categories.
|
Spanner Locks |  |
Locks - Spanner
|
Specialty Grub Screws |  |
Plungers - Spring - Threaded
|
Socket Set Screws - Acetal Tipped
|
Socket Set Screws - Brass Tipped
|
Socket Set Screws - Cone Point
|
Socket Set Screws - Diamond Knurled Tip
Grips rough shafts. The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Dog Point
|
Socket Set Screws - Flat Ball Tip
The ball can rotate up to 9 Deg. to fasten the object securely.
|
Socket Set Screws - Flat Tip
|
Socket Set Screws - Half Dog Point
|
Socket Set Screws - Nylon Tipped
Soft tip compresses into threads to become self locking.
|
Socket Set Screws - Rolling Ball Tip
|
Socket Set Screws - Solder Tipped
|
Specialty Tools |  |
Tools - Circlip Pliers - External
External circlip pliers including standard and ratchet type.
|
Tools - Circlip Pliers - Internal
Internal circlip pliers including standard and ratchet type.
|
Tools - Circlip Pliers - Reversible
Reversible circlip pliers for internal and external circlips.
|
Tools - Crimping
For crimping loop sleeves, plugs and eyes used with miniature cable.
|
Tools - Dental Handpiece Repair
Tools for dental handpiece repair work.
|
Tools - E-Clip Applicators
|
Tools - Pullers - Small
Small pullers for miniature bearings, gears, pulleys, sprockets and other pressed on parts.
|
Tools - Tweezers
Selection of tweezers for those fiddly jobs.
|
Speed Reducers |  |
Gearboxes - Basic Inline and Offset
SRBI and SRBO Series.
|
Gearboxes - Bu-Ord - Size 11 - Double End
SRBO11 Series.
|
Gearboxes - Bu-Ord - Size 15 - Double End
SRBO15 Series.
|
Gearboxes - Bu-Ord - Size 15 - Single End
SRBO15 Series.
|
Gearboxes - Bu-Ord - Size 18 - Double End
SRBO18 Series.
|
Gearboxes - Bu-Ord - Size 18 - Single End
SRBO18 Series.
|
Gearboxes - Cross Axis - 18.8 x 13.5 x 12.0mm
PREM6 Series.
|
Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1
Worm Gears - Precision.
|
Gearboxes - Cross Axis - 47.0 x 40.0 x 22.0mm
Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20.
|
Gearboxes - Cross Axis - 52 x 34 x 34
Helical or Wormwheel Gears. 6mm Bores. E20 Series.
|
Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
|
Gearboxes - Cross Axis - 70.0 x 60.0 x 28.0mm
Worm and Wormwheel box. 2.5 to 8.8Nm. 5:1 to 120:1 ratios. P30 and PF30 Series.
|
Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
|
Gearboxes - Cross Axis - 78 x 48 x 48
Helical or Wormwheel Gears. 10mm Bores. E30 Series.
|
Gearboxes - Cross Axis - 83.3 x 76.2 x 44.5
Worm Gear - 64DP Precision.
|
Gearboxes - Cross Axis - 85.6 x 66.7 x 34.9
Worm Gears - Commercial size 26.
|
Gearboxes - Cross Axis - 90.0 x 75.0 x 32.0mm
Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.
|
Gearboxes - Cross Axis - 104 x 63 x 63
Helical or Wormwheel Gears. 15mm Bores. E40 Series.
|
Gearboxes - Cross Axis - 110.0 x 95.0 x 38.0mm
Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.
|
Gearboxes - Cross Axis - 130 x 80 x 80
Helical or Wormwheel Gears. 20mm Bores. E50 Series.
|
Gearboxes - Cross Axis - 130.0 x 110.0 x 46.0mm
Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series.
|
Gearboxes - Cross Axis - 136.5 x 111.1 x 63.5
Worm gears.
|
Gearboxes - Cross Axis - 150 x 96 x 96 A
Helical or Wormwheel Gears. 25mm Bores. E60 Series.
|
Gearboxes - Cross Axis - 150 x 96 x 96 B
Helical or Wormwheel Gears. 30mm Bores. E60B Series.
|
Gearboxes - Cross Axis - 150.0 x 125.0 x 54.0mm
Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series.
|
Gearboxes - Cross Axis - 170.0 x 145.0 x 60.0mm
Worm and Wormwheel box. 38.0 to 164.0Nm. 5:1 to 120:1 ratios. P70 and PF70 Series.
|
Gearboxes - Inline - 27 x 45mm
J27 Series. Miniature gearbox.
|
Gearboxes - Inline - 50 x 30mm
J51 Series.
|
Gearboxes - Inline - 50 x 40mm
J52 Series.
|
Gearboxes - Inline - 50 x 40mm Hi Torque
JHD51 Series.
|
Gearboxes - Inline - 50 x 50mm
J53 Series.
|
Gearboxes - Inline - 60 x 56mm
NT61 Series.
|
Gearboxes - Inline - 60 x 70mm
NT62 Series.
|
Gearboxes - Inline - 60 x 84mm
NT63 Series.
|
Gearboxes - Inline - 63 x 40mm
J64 Series.
|
Gearboxes - Inline - 63 x 50mm
J65 Series.
|
Gearboxes - Inline - 63 x 60mm
J66 Series.
|
Gearboxes - Inline - 90 x 74mm
NT91 Series.
|
Gearboxes - Inline - 90 x 94mm
NT92 Series.
|
Gearboxes - Inline - 112.0 x 52.0 Low Backlash
Taper Gears - Weight: 1.50kg. TG112 Series.
|
Gearboxes - Inline - 114 x 90mm
NT121 Series.
|
Gearboxes - Inline - 120 x 103mm
NTB121 Series.
|
Gearboxes - Inline - 120 x 120mm
NT122 Series.
|
Gearboxes - Inline - 120 x 160mm
NTB122 Series.
|
Gearboxes - Inline - Epicyclic - 57.0 x 45.0 x 45.0mm
Servo Gearbox 3.4Nm to 7Nm ratios 3:1 - 6:1. EHD04 Series.
|
Gearboxes - Inline - Epicyclic - 78.0 x 60.0 x 60.0mm
Servo Gearbox 8Nm to 19Nm ratios 3:1 - 6:1. EHD06 Series.
|
Gearboxes - Inline - Epicyclic - 80.0 x 75.0 x 75.0mm
Servo Gearbox 20Nm to 50Nm ratios 3:1 - 6:1. EHD08 Series.
|
Gearboxes - Inline - Epicyclic - 115.0 x 75.0 x 75.0mm
Servo Gearbox 35Nm to 50Nm ratios 9:1 - 36:1. EHD08 Series.
|
Gearboxes - Inline - Epicyclic - 134.0 x 108.0mm
Servo Gearbox 60Nm to 140Nm ratios 3:1 - 6:1. EHD12 Series.
|
Gearboxes - Inline - Epicyclic - 160.0 x 135.0mm
Servo Gearbox 180Nm to 380Nm ratios 3:1 - 6:1. EHD16 Series.
|
Gearboxes - Light Duty - Base Mount
Approx weight 115 grams. Discontinued group. Minimum quantities will apply to manufacture.
|
Gearboxes - Light Duty - Panel Mount
Approx weight 115 grams. SRLP Series.
|
Gearboxes - Offset - 58 x 46 x 24
FF10 Series.
|
Gearboxes - Offset - 60 x 60
Base mounted. SRBM60 Series.
|
Gearboxes - Offset - 80 x 64 x 32
FF15 Series.
|
Gearboxes - Offset - 117 x 100 x 48
FF20 Series.
|
Gearboxes - Offset - 175 x 150 x 60
FF30 Series.
|
Gearboxes - Offset - 236 x 190 x 90
FF40 Series.
|
Gearboxes - Offset - 310 x 240 x 100
FF50 Series.
|
Gearboxes - Output Shafts
For use in Cross Axis gearboxes with bores. P and PF Series.
|
Gearboxes - Power - Mounting Feet
Optional mounting feet for power gearboxes.
|
Gearboxes - Power - Series FH
VP.FH Series.
|
Gearboxes - Power - Series FL
VP.FL Series.
|
Gearboxes - Power - Series H
VP.H Series.
|
Gearboxes - Power - Series H Reinforced Design
VX.H Series.
|
Gearboxes - Power - Series L
VP.L Series.
|
Gearboxes - Power - Series L Reinforced Design
VX.L Series.
|
Gearboxes - Right Angle - 30.5 x 30.5 x 18.7mm
Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.
|
Gearboxes - Right Angle - 36.5 x 36.5 x 29.4mm
1:1 ratio. GDRA Series. Miniature gearbox.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 20.0mm
Mitre Gears 1:1 ratio. GDRA Series. Miniature gearbox.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm
BLH20 Series. Miniature gearbox.
|
Gearboxes - Right Angle - 40.0 x 40.0 x 25.0mm (B)
Economy Bevel Gear Type. GDRA Series. Miniature gearbox.
|
Gearboxes - Right Angle - 50.0 x 50.0 x 30.0mm
Economy Bevel Gear Type. GDRA Series.
|
Gearboxes - Right Angle - 55.0 x 55.0 x 34.0mm
BLH30 Series.
|
Gearboxes - Right Angle - 60.0 x 60.0 x 30.0mm
Mitre Gears 1:1 ratio. GDRA Series.
|
Gearboxes - Right Angle - 62.5 x 50.8 x 30.0mm
Bevel Gears - Plastic Housing. GDLBP Series.
|
Gearboxes - Right Angle - 63.0 x 63.0 x 40.0mm
Economy Bevel Gear Type. GDRABE Series.
|
Gearboxes - Right Angle - 75.0 x 44.0 x 44.0mm
Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.
|
Gearboxes - Right Angle - 75.0 x 75.0 x 44.0mm
BLH40 Series.
|
Gearboxes - Right Angle - 80.0 x 80.0 x 40.0mm
Mitre Gears 1:1 ratio. GDRA Series.
|
Gearboxes - Right Angle - 82.0 x 62.0 x 40.0mm
GDRHD Series.
|
Gearboxes - Right Angle - 85.5 x 77.8 x 31.8mm
Bevel Gears - Plastic Housing. GDLBP Series.
|
Gearboxes - Right Angle - 87.0 x 66.0 x 60.0mm
1 : 1 ratio only. BL18 Series.
|
Gearboxes - Right Angle - 100.0 x 100.0 x 60.0mm
BLH50 Series.
|
Gearboxes - Right Angle - 125.0 x 125.0 x 80.0mm
BLH60 Series.
|
Gearboxes - Right Angle - 132.0 x 80.0 x 80.0mm
Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series.
|
Gearboxes - Right Angle - 140.0 x 107.0 x 66.0mm
GDRHD Series.
|
Gearboxes - Right Angle - 140.0 x 140.0 x 98.0mm
BLH70 Series.
|
Gearboxes - Right Angle - 166.0 x 128.0 x 76.0mm
GDRHD Series.
|
Gearboxes - Right Angle - 190.0 x 120.0 x 120.0mm
Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series.
|
Gearboxes - Right Angle - 245.0 x 160.0 x 160.0mm
Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series.
|
Gearboxes - Right Angle - 300.0 x 200.0 x 200.0mm
Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.
|
Gearboxes - Tee - 36.5 x 36.5 x 29.4mm
GDRAB Series. Miniature gearbox.
|
Gearboxes - Tee - 38.9 x 38.1 x 27.0mm A
Worm Gear. WG11 Series. Miniature gearbox.
|
Gearboxes - Tee - 38.9 x 38.1 x 27.0mm B
1:1, 2:1 and 3:1 ratios. GDRA Series. Miniature gearbox.
|
Gearboxes - Tee - 40.0 x 40.0 x 25.0mm
BLHT20 Series. Miniature gearbox.
|
Gearboxes - Tee - 55.0 x 40.0 x 25.0mm
Bevel Gears - 0.53 to 1.77 Nm. BLHM20 Series.
|
Gearboxes - Tee - 55.0 x 55.0 x 34.0mm
BLHT30 Series.
|
Gearboxes - Tee - 62.5 x 50.8 x 30.0mm
Bevel Gears - Plastic Housing. GDLBP Series.
|
Gearboxes - Tee - 65.0 x 50.0 x 50.0mm
BL8 Series.
|
Gearboxes - Tee - 70.0 x 70.0mm
Lengths from 90 to 120mm. BL15 Series.
|
Gearboxes - Tee - 74.0 x 55.0 x 34.0mm
Bevel Gears - 1.32 to 4.40 Nm. BLHM30 Series.
|
Gearboxes - Tee - 75.0 x 50.0 x 50.0mm
BL8 Series.
|
Gearboxes - Tee - 75.0 x 75.0 x 44.0mm
BLHT40 Series.
|
Gearboxes - Tee - 80.0 x 60.0 x 50.0mm
BL8 Series.
|
Gearboxes - Tee - 82.0 x 74.0 x 40.0mm
GDRHD Series.
|
Gearboxes - Tee - 85.5 x 77.8 x 31.8mm
Bevel Gears - Plastic Housing. GDLBP Series.
|
Gearboxes - Tee - 100.0 x 75.0 x 44.0mm
Bevel Gears - 3.0 to 10.3 Nm. BLHM40 Series.
|
Gearboxes - Tee - 100.0 x 100.0 x 60.0mm
BLHT50 Series.
|
Gearboxes - Tee - 125.0 x 125.0 x 80.0mm
BLHT60 Series.
|
Gearboxes - Tee - 135.0 x 100.0 x 60.0mm
Bevel Gears - 7.7 to 30.0 Nm. BLHM50 Series.
|
Gearboxes - Tee - 140.0 x 132.0 x 66.0mm
GDRHD Series.
|
Gearboxes - Tee - 140.0 x 140.0 x 98.0mm
BLHT70 Series.
|
Gearboxes - Tee - 166.0 x 160.0 x 76.0mm
GDRHD Series.
|
Gearboxes - Tee - 170.0 x 125.0 x 80.0mm
Bevel Gears - 19.0 to 70.0 Nm. BLHM60 Series.
|
Gearboxes - Tee - 180.0 x 140.0 x 98.0mm
Bevel Gears - 26.0 to 128.0 Nm. BLHM70 Series.
|
Spherical Bushings |  |
Bushings - Spherical - Plastic
|
Bushings - Spherical - Steel
|
Spherical OD Bearings |  |
Bearings - Spherical OD
Bearings with a spherical outside diameter.
|
Bearings - Spherical OD - Miniature
This group is not readily available - subject to production quantities.
|
Spherical OD Bushes |  |
Balls - Bored - Plastic
Bored acetal balls as used in plastic rod ends.
|
Balls - Bored - Steel
Bored steel balls as used in steel rod ends.
|
Bushes - Bronze - Spherical - Sintered
Spherical OD Oil Impregnated Sintered Bronze Bushes.
|
Spherical Plain Bearings |  |
Bushings - Spherical - Plastic
|
Bushings - Spherical - Steel
|
Spherical Thrust Bearings |  |
Bearings - Thrust - Plastic - Self Seating
|
Spider Type Flexible Couplings |  |
Couplings - Spider Type
2.1 to 17 Nm.
|
Hobby Couplings - Spider Type
A small selection of spider type couplings.
|
Spiral Beam Couplings |  |
Couplings - Helical - Long Series
2.9 to 31.4 Nm.
|
Couplings - Helical - Low Inertia
0.8 to 13.2 Nm.
|
Couplings - Helical - Precision
0.14 to 9 Nm. 25000 max RPM.
|
Couplings - Helical - Short - Ondrives
|
Couplings - Helical - Standard
0.1 to 16.2 Nm.
|
Couplings - Slit Type
Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.
|
Couplings - Spiral Beam - 6 Beam
|
Spiral Bevel Gears |  |
Gears - Bevel - Spiral - Module 1.50
For 90 degree angle power transfer.
|
Gears - Bevel - Spiral - Module 2.00
For 90 degree angle power transfer.
|
Gears - Bevel - Spiral - Module 2.50
For 90 degree angle power transfer.
|
Gears - Bevel - Spiral - Module 3.00
For 90 degree angle power transfer.
|
Gears - Bevel - Spiral - Module 4.00
For 90 degree angle power transfer.
|
Spiral Mitre Gears |  |
Gears - Mitre - Spiral - Module 1.00
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 1.25
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 1.50
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 2.00
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 2.25
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 2.50
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 3.00
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 3.50
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 4.00
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Gears - Mitre - Spiral - Module 5.00
1:1 Ratio. 20 Degree Pressure Angle - 35 Degree Spiral tooth - Steel.
|
Spiral Rings - External |  |
Spiral Rings - External - Heavy Duty
AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2
|
Spiral Rings - External - Light Duty
Includes series CE / VS / US - Spring Steel and Stainless Steel.
Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US
|
Spiral Rings - External - Medium Duty
AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1
|
Spiral Rings - External - Medium/Heavy Duty
AME / WST / RST - Spring Steel and Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST
|
Spiral Rings - Internal |  |
Spiral Rings - Internal - Heavy Duty
Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2
|
Spiral Rings - Internal - Light Duty
Includes series CI / VH / UR - Spring Steel and Stainless Steel.
Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR
|
Spiral Rings - Internal - Medium Duty
Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1
|
Spiral Rings - Internal - Medium/Heavy Duty
Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT
|
Spirator -tm- Spring-Powered Reels |  |
Reels - Spring Powered - Base Mounted - Plastic Case
|
Spirol Pins |  |
Pins - Spirol
|
Spline Type Flexible Couplings |  |
Couplings - Spline Type
0.5 to 4.5 Nm. 12000 to 24000 rpm.
|
Splined Bushes - Flanged |  |
Splined Bushes - Flanged
Steel C45 (080M46) : ISO 14 (DIN 5463) Medium Series. Phosphor Bronze : ISO 14 (DIN 5463) Medium Series. Machinable. (Tolerances do not follow ISO 14 Standard). Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.
|
Splined Shafts and Bushes |  |
Splined Bushes - Unflanged
Match with same size External splined shafts.
Match bushes and shafts by Major Diameter.
|
Splined Shafts
Match with same size internal splined bushes.
Match bushes and shafts by Major Diameter.
|
Splines - Ball |  |
Splines - Ball - Telescoping
|
Split Bushes |  |
Bushes - Steel - PTFE Lined - Split
Similar style to Glacier™ bushes.
|
Split Gear Clamps |  |
Clamps - Gear - Split
Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.
|
Split Hubs |  |
Hubs - Split
|
Split Lock Washers |  |
Washers - Lock - Split
|
Split Pins |  |
Hobby Split Pins
A small selection of popular sizes.
|
Pins - Cotter - Plain
Split pins.
|
Pins - Cotter - Stainless Steel
Split pins.
|
Pins - Cotter - Zinc Plated
Split pins.
|
Sprag Clutch Bearings |  |
Bearings - One Way - Sprag - BR
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
|
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
|
Bearings - One Way - Sprag - TFS
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
|
Bearings - One Way - Sprag - TSS
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
|
Spring Assemblies - Bracket - RINO |  |
Spring Assemblies - Bracket - RINO
Spring: Stainless Steel 301 S21 Grade. Bobbin and Bracket: Nylon Moulded secured to aluminium sheet. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring. End holes are centred at the distances and diameters shown in the tables.
|
Spring Assemblies - Small Bracket - RINO
Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.
|
Spring Assemblies - Single - RINO |  |
Spring Assemblies - Single - RINO
Spring: Stainless Steel 301 S21 Grade. Other Parts: Pressed Mild Steel, Zinc Plate and clear passivated. Temp Max 200 Deg C / Min -200 Deg C. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.
|
Spring Assemblies - Twin - RINO
Spring: Stainless Steel 301 S21 Grade. Other Parts: Pressed Mild Steel, Zinc Plate and clear passivated. Temp Max 200 Deg C / Min -200 Deg C. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.
|
Spring Assortments |  |
Assortment Kits - Various
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins
|
Spring Couplings |  |
Couplings - Slip - Spring Wrapped
Tension control - transmission overload protection. 0.035 to 1.69 Nm.
|
Couplings - Spring
1.4 Nm Max Torque.
|
Spring Hinges |  |
Hinges - Flexi-Hinge - Precision
Double and Single Ended - Limited Angle Rotary Applications.
|
Spring Motors |  |
Spring Motor Assemblies - Closed - RINO
Budget Assemblies. Average fatigue life of 30,000 cycles.
Springs : 301 Stainless Steel. Average fatigue life of 30,000 cycles. Constant force motor springs offer a compact alternative for long running motors. 50 turns or more at near constant torque can be achieved. Typically used for retrieving and returning. The spring motor has many uses.
|
Spring Motor Assemblies - Open - RINO
Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.
Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.
|
Spring Motor Assemblies - SDP
Base Mounted.
Base Mounted. Springs : 301 Stainless Steel.
|
Spring Motors - SDP |  |
Spring Motors - RINO
301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.
|
Spring Motors - SDP
301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.
|
Spring Mounts - Damped |  |
Mounts - Vibration - Spring - Damped
Temp Range: -70 to 175 Deg C (-94 to 347 Deg F).
|
Spring Pins |  |
Pins - Roll - Plain
Plain carbon spring steel DIN1481.
|
Pins - Roll - Stainless Steel
304 and 420 grades DIN1481.
|
Pins - Roll - Zinc Plated
Zinc plated spring steel DIN1481.
|
Pins - Spirol
|
Spring Plungers |  |
Plungers - Spring - Smooth
Stainless Steel or Plastic - No Thread.
|
Plungers - Spring - Smooth - Double Ended
|
Plungers - Spring - Striker Bushings
Use with ball or bolt spring plungers for a hard wearing contact area.
|
Plungers - Spring - Threaded
|
Plungers - Spring - Threaded - With Limit Switch
|
Spring Posts |  |
Posts - Spring
|
Spring Powered Reels |  |
Reels - Spring Powered - Arbour Mounted
Mounting studs sold seperately.
|
Reels - Spring Powered - Arbour Mounted - Mounting Stud
To suit arbour mounted spring reels.
|
Reels - Spring Powered - Base Mounted - Plastic Case
|
Reels - Spring Powered - Base Mounted - Steel
|
Reels - Spring Powered - Bracket Mounted
|
Spring Steel |  |
Wire - Steel - Spring - Music Wire
SAE 1090 Spring Steel.
|
Spring Suspension Mounts |  |
Mounts - Spring - Suspension - Pedestal
|
Mounts - Spring - Suspension - Single Hole
|
Mounts - Spring - Suspension - Square Plate
|
Spring Type Flexible Couplings |  |
Couplings - Spring
1.4 Nm Max Torque.
|
Spring Washers |  |
Washers - Disc Spring - Steel
Includes Carbon Steel and Stainless Steel
|
Washers - Spring
Wave Washers - All Materials.
|
Spring Wrapped Slip Clutches |  |
Clutches - Slip - Spring Wrapped
|
Spring Wrapped Slip Couplings |  |
Couplings - Slip - Spring Wrapped
Tension control - transmission overload protection. 0.035 to 1.69 Nm.
|
Springs - Compression |  |
Springs - Compression
Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.
|
Springs - Compression - Metre Lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.
|
Springs - Constant Force |  |
Springs - Constant Force
Mounting hole specifications will be supplied on request. Free ID may vary to meet load specification.
|
Springs - Die |  |
Springs - Die
High tensile strength chromium alloy steels. Heat Resistance: Up to +230°C (Loss of load occurs above +120°C). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.
|
Springs - Disc |  |
Washers - Disc Spring - Plastic
|
Washers - Disc Spring - Steel
Includes Carbon Steel and Stainless Steel
|
Springs - Extension |  |
Springs - Extension
Zinc Plated Spring Steel not recommended for applications exceeding 121 Deg C (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 Deg C (500 Deg F). 302 stainless steel is slightly magnetic.
|
Springs - Extension - Metre Lengths
Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.
|
Springs - Gas - Adjustable |  |
Gas Springs - Adjustable - 50-540N
|
Gas Springs - Adjustable - Accessories
|
Gas Springs - Adjustable - Push Type - Max 100N
|
Gas Springs - Adjustable - Push Type - Max 180N
|
Gas Springs - Adjustable - Push Type - Max 400N
|
Gas Springs - Adjustable - Push Type - Max 700N
|
Gas Springs - Adjustable - Push Type - Max 1300N
|
Gas Springs - Adjustable - Push Type - Max 2600N
|
Gas Springs - Adjustable - Push Type - Max 5000N
|
Springs - Hobby |  |
Hobby Springs - Compression
A small selection of popular sizes.
|
Hobby Springs - Extension
A small selection of popular sizes.
|
Springs - Torsion - Anti Backlash |  |
Springs - Torsion - Anti Backlash
|
Springs - Torsion - Left Hand Wound |  |
Springs - Torsion - Left Hand Wound
Left Hand Wound. 180 Deg. Deflection. Right hand wound and special springs are available on special order.
|
Sprockets - Idler |  |
Sprockets - Roller Chain - Idler
Complete with Needle Roller Bearing.
|
Sprockets - Posi-Drive |  |
Sprockets - Posi-Drive - 3.75 mm Circular Pitch
Same as US 0.1475 Pitch - Use with Double Core Belts.
Use with Double Core Posi-Drive Belts. 3.746mm Circular Pitch. Same as US 0.1475 Pitch.
|
Sprockets - Posi-Drive - 4.00 mm Circular Pitch
Same as US 20 Pitch - Use with Double Core Belts.
Use with Double Core Posi-Drive Belts. 3.990mm Circular Pitch. Same as US 20 Pitch.
|
Sprockets - Posi-Drive - 20 Pitch |  |
Sprockets - Posi-Drive - 4.00 mm Circular Pitch
Same as US 20 Pitch - Use with Double Core Belts.
|
Sprockets - Posi-Drive - Belts to Suit |  |
Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core
Same as US 0.1475 Pitch - Use with Posi-Drive Sprockets.
|
Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core
Same as US 20 Pitch - Use with Posi-Drive Sprockets.
|
Sprockets - Posi-Drive - Pulleys |  |
Pulleys - Posi-Drive - 2.50 mm Circular Pitch
Same as US 32 Pitch - Use with Single Core Belts.
|
Pulleys - Posi-Drive - 4.00 mm Circular Pitch
Same as US 20 Pitch - Use with Single Core Belts.
|
Sprockets - Roller Chain |  |
Sprockets - Roller Chain - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
|
Sprockets - Roller Chain - Metal
With and without hubs.
|
Sprockets - Roller Chain - Plastic
Nylon - Acetal - With and without bore inserts.
|
Sprockets and Chain - Simplex - Duplex and Triplex |  |
Chain - Roller - Metal - Duplex
High tensile steel.
|
Chain - Roller - Metal - Duplex - Links
High tensile steel.
|
Chain - Roller - Metal - Simplex
Includes Stainless Steel and Miniature Sizes.
|
Chain - Roller - Metal - Simplex - Links
Includes Stainless Steel and Miniature Sizes.
|
Chain - Roller - Metal - Triplex
High tensile steel.
|
Chain - Roller - Metal - Triplex - Links
High tensile steel.
|
Chain - Roller - Plastic - Single Row
|
Sprockets - Roller Chain - Metal
With and without hubs.
|
Sprockets - Roller Chain - Plastic
Nylon - Acetal - With and without bore inserts.
|
Sprockets and Chain - Single - Double and Triple Row |  |
Chain - Roller - Metal - Duplex
High tensile steel.
|
Chain - Roller - Metal - Duplex - Links
High tensile steel.
|
Chain - Roller - Metal - Simplex
Includes Stainless Steel and Miniature Sizes.
|
Chain - Roller - Metal - Simplex - Links
Includes Stainless Steel and Miniature Sizes.
|
Chain - Roller - Metal - Triplex
High tensile steel.
|
Chain - Roller - Metal - Triplex - Links
High tensile steel.
|
Chain - Roller - Plastic - Single Row
|
Sprockets - Roller Chain - Metal
With and without hubs.
|
Sprockets - Roller Chain - Plastic
Nylon - Acetal - With and without bore inserts.
|
Sprockets and Ladder Chain |  |
Chain - Ladder
Steel - Brass - Stainless - High Tensile.
|
Sprockets - Ladder Chain
With and without hubs. Plastic and Steel.
|
Sprockets and Roller Chain |  |
Chain - Roller - Metal - Duplex
High tensile steel.
|
Chain - Roller - Metal - Duplex - Links
High tensile steel.
|
Chain - Roller - Metal - Simplex
Includes Stainless Steel and Miniature Sizes.
|
Chain - Roller - Metal - Simplex - Links
Includes Stainless Steel and Miniature Sizes.
|
Chain - Roller - Metal - Triplex
High tensile steel.
|
Chain - Roller - Metal - Triplex - Links
High tensile steel.
|
Chain - Roller - Plastic - Single Row
|
Sprockets - Roller Chain - Metal
With and without hubs.
|
Sprockets - Roller Chain - Plastic
Nylon - Acetal - With and without bore inserts.
|
Sprung Ball Tip Set Screws |  |
Plungers - Spring - Threaded
|
Spur Gear Stock - Metric Sizes |  |
Gears - Pinion Wire - Module 0.40
Brass.
|
Gears - Pinion Wire - Module 0.50
Brass.
|
Gears - Pinion Wire - Module 0.80
Brass.
|
Gears - Spur - Stock - Module 0.40
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.50
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.80
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 1.00
Lengths of spur gear stock for manufacturing gears.
|
Spur Gear Stock - US Sizes |  |
Gears - Pinion Wire - 24 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 32 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 44 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 48 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 64 Pitch
Brass and carbon steel.
|
Gears - Spur - Stock - 20 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 24 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 32 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 48 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Spur Gears - Antibacklash - Metric Sizes |  |
Gears - Spur - Antibacklash - Module 0.50
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - Module 0.80
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - Module 1.00
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Spur Gears - Antibacklash - US Sizes |  |
Gears - Spur - Antibacklash - 24 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - 32 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - 48 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - 64 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - 72 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - 80 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - 96 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Antibacklash - 120 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Spur Gears - Circular Pitch |  |
Gears - Spur - Circular Pitch 2
PCD = No. of Teeth x 0.636mm (2.000 / Pi.). Various styles and materials.
|
Gears - Spur - Circular Pitch 5
PCD = No. of Teeth x 1.591mm (5.000 / Pi.). Various styles and materials.
|
Spur Gears - Differential End |  |
Gears - Spur - 48 Pitch - Differential End
To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 64 Pitch - Differential End
To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 72 Pitch - Differential End
To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 96 Pitch - Differential End
To suit the precision diffs listed on this site. 2024 aluminium and 303 stainless steel.
|
Spur Gears - Hobby |  |
Hobby Gears - Spur - Module 1
A small selection of Module 1 popular sizes (20 teeth = 20mm PCD, 40teeth = 40mm PCD).
|
Spur Gears - Hub Mounting |  |
Gears - Spur - 24 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 32 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 48 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 64 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 72 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 80 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 96 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 120 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Spur Gears - Metric Sizes |  |
Gears - Spur - Module 0.15
PCD = No. of Teeth x 0.150mm. 20 Degree Pressure Angle. Brass.
|
Gears - Spur - Module 0.20
PCD = No. of Teeth x 0.200mm. 20 Degree Pressure Angle. Brass.
|
Gears - Spur - Module 0.25
PCD = No. of Teeth x 0.250mm. 20 Degree Pressure Angle. Brass and carbon steel.
|
Gears - Spur - Module 0.30
PCD = No. of Teeth x 0.300mm. 20 Degree Pressure Angle. Brass.
|
Gears - Spur - Module 0.40
PCD = No. of Teeth x 0.400mm. 20 Degree Pressure Angle. 416 stainless steel, acetal, brass and carbon steel.
|
Gears - Spur - Module 0.50
PCD = No. of Teeth x 0.500mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 0.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 0.60
PCD = No. of Teeth x 0.600mm. 20 Degree Pressure Angle. Carbon steel.
|
Gears - Spur - Module 0.70
PCD = No. of Teeth x 0.700mm. 20 Degree Pressure Angle. Acetal.
|
Gears - Spur - Module 0.75
PCD = No. of Teeth x 0.750mm. 20 Degree Pressure Angle. Brass.
|
Gears - Spur - Module 0.75 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 0.80
PCD = No. of Teeth x 0.800mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 0.80 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 1.00
PCD = No. of Teeth x 1.000mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 1.00 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 1.25
PCD = No. of Teeth x 1.250mm. 20 Degree Pressure Angle. 303 stainless steel and acetal.
|
Gears - Spur - Module 1.50
PCD = No. of Teeth x 1.500mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.
|
Gears - Spur - Module 1.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 2.00
PCD = No. of Teeth x 2.000mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.
|
Gears - Spur - Module 2.00 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 2.50
PCD = No. of Teeth x 2.500mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon.
|
Gears - Spur - Module 2.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 3.00
PCD = No. of Teeth x 3.000mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon.
|
Gears - Spur - Module 3.00 - Stem
Gears with integral shafts.
|
Spur Gears - Minilash - US Sizes |  |
Gears - Spur - Minilash - 64 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Minilash - 72 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Minilash - 80 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Minilash - 96 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Gears - Spur - Minilash - 120 Pitch
Steel - Stainless Steel - Aluminium - 20 Degree Pressure Angle.
|
Spur Gears - Slip Clutch Flange Mounting |  |
Gears - Spur - 48 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 64 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 72 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 96 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 120 Pitch - Slip Clutch Flange Mounting
For mounting to flanges of slip clutches. 2024 aluminium and 303 stainless steel.
|
Spur Gears - Stem - Metric Sizes |  |
Gears - Spur - Module 0.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 0.75 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 0.80 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 1.00 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 1.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 2.00 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 2.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 3.00 - Stem
Gears with integral shafts.
|
Spur Gears - Stem - US Sizes |  |
Gears - Spur - 24 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 32 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 48 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 64 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 72 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 80 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 96 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 120 Pitch - Stem
303 stainless steel.
|
Spur Gears - US Sizes - 14.5 Degree Pressure Angle |  |
Gears - Spur - 16 Pitch - 14.5 Degree
PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5 Degree Pressure Angle. Nylon.
|
Gears - Spur - 24 Pitch - 14.5 Degree
PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5 Degree Pressure Angle. Nylon, brass and carbon steel.
|
Gears - Spur - 32 Pitch - 14.5 Degree
PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon.
|
Gears - Spur - 48 Pitch - 14.5 Degree
PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon.
|
Spur Gears - US Sizes - 20 Degree Pressure Angle |  |
Gears - Spur - 16 Pitch - 20.0 Degree
PCD = No. of Teeth x 1.588mm (1/16 in.). 20 Degree Pressure Angle. Nylon and acetal.
|
Gears - Spur - 24 Pitch - 20.0 Degree
PCD = No. of Teeth x 1.058mm (1/24 in.). 20 Degree Pressure Angle. 2024 aluminium, brass, acetal, 303 stainless steel, nylon, bakelite and alloy steel.
|
Gears - Spur - 32 Pitch - 20.0 Degree
PCD = No. of Teeth x 0.794mm (1/32 in.). 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, acetal, bakelite, brass, carbon steel and nylon.
|
Gears - Spur - 48 Pitch - 20.0 Degree
PCD = No. of Teeth x 0.529mm (1/48 in.). 20 Degree Pressure Angle. 2024 and 5052 aluminium, 303 stainless steel, acetal, brass and nylon.
|
Gears - Spur - 64 Pitch
PCD = No. of Teeth x 0.397mm (1/64 in.). 20 Degree Pressure Angle. 5052 aluminium, stainless steel, acetal and brass.
|
Gears - Spur - 72 Pitch
PCD = No. of Teeth x 0.353mm (1/72 in.). 20 Degree Pressure Angle. 2024 aluminium, stainless steel and acetal.
|
Gears - Spur - 80 Pitch
PCD = No. of Teeth x 0.318mm (1/80 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 96 Pitch
PCD = No. of Teeth x 0.265mm (1/96 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel.
|
Gears - Spur - 120 Pitch
PCD = No. of Teeth x 0.212mm (1/120 in.). 20 Degree Pressure Angle. 2024 aluminium and 303 stainless steel.
|
SPZ Section V Belts |  |
Belts - Vee - 9.7 x 8.0 mm - SPZ
Miniature and small belts. 9.7mm Top Width x 8.0mm Height.
|
Square Bar |  |
Bar - Square - 303 Stainless
Corrosion resistant 303 grade stainless.
|
Bar - Square - Brass
|
Bar - Square - Carbon Steel
|
Keys - Keysteel Lengths - Square
|
Square Bearings Housings |  |
Housings - Bearing - Square - Miniature
Aluminium housings to suit standard radial ball bearings.
|
Square Bungs for Tubing |  |
Bungs - Rectangular
Plastic bungs fit inside rectangular tube.
|
Bungs - Square
Plastic bungs fit inside square tube.
|
Square Groove OD Bearings |  |
Bearings - Square Groove Profile OD
Special bearings. Not readily available.
|
Square Hole Bushings |  |
Bushings - Square Hole
|
Square Hole Sleeves |  |
Sleeves - Square Hole - Plain
|
Sleeves - Square Hole - Threaded
|
Square Machine Keys |  |
Keys - Machine
|
Square Plate Spring Suspension Mounts |  |
Mounts - Spring - Suspension - Square Plate
|
Square Spacers |  |
Spacers - Square - Threaded
Threaded spacers.
|
Square Tips for Tubing |  |
Tips - Square
Plastic tips fit over outside of tubing.
|
Square Tubing |  |
Tube - Square - Brass
|
Tube - Square - Carbon Fibre
High impact light weight carbon fibre for modelling.
|
Square Washers |  |
Washers - Square
|
Stainless Steel Balls |  |
Balls - Stainless Steel - 304 Grade
A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.
|
Balls - Stainless Steel - 316 Grade
A4 Grade. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.
|
Balls - Stainless Steel - 440C Grade
Hardness: Rockwell C: 55-60.
|
Stainless Steel Bar |  |
Bar - Hexagonal - 303 Stainless
Corrosion resistant 303 grade stainless.
|
Bar - Hexagonal - 400 Stainless
Strong stainless steel. Not as corrosion resistant as 300 grade but much tougher.
|
Bar - Square - 303 Stainless
Corrosion resistant 303 grade stainless.
|
Rod - Round - Stainless Steel
For general hobby applications.
|
Stainless Steel Bearing Locknuts and Washers |  |
Nuts - Lock - For Bearings - AN Series Stainless Steel
N/AN series locknuts.
|
Washers - Lock - Tabbed - Stainless Steel
Standard W/WS series lockwasher for use with bearing locknuts.
|
Stainless Steel Bearings |  |
Bearings - Ball - 304 Stainless Steel
Corrosion and Heat resistance - Non Magnetic - Unhardened.
|
Bearings - Ball - 316 Stainless Steel
Food and Medical grade Stainless Steel - Non Hardenable.
|
Bearings - Ball - 440C Stainless 6000 / 6200 / 6300 Series
Stainless Steel 440C Grade - Hardened - Precision - Corrosion Resistant.
|
Stainless Steel Cap Screws |  |
Screws - Socket - Cap - Stainless
UNC - UNF - METRIC - Stainless Steel.
|
Stainless Steel Cotter Pins |  |
Pins - Cotter - Stainless Steel
Split pins.
|
Stainless Steel Dowel Pins |  |
Pins - Dowel - Standard - Stainless Steel
Precision Dowel Pins - Various Corrosion Resistant Grades.
|
Stainless Steel Flat Washers |  |
Washers - Flat - Stainless Steel - Commercial
Flat washers.
|
Stainless Steel Idler Rollers |  |
Rollers - Idler - Stainless Steel
|
Stainless Steel Nuts |  |
Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nylon Insert for Locking.
|
Nuts - Hexagonal - Stainless Steel
UNC - UNF - BA - METRIC - BSW - Full and Half Nuts - Course - Fine - Extra Fine.
|
Stainless Steel Pins |  |
Pins - Cotter - Zinc Plated
Split pins.
|
Pins - Dowel - Standard - Hardened Steel
Precision Dowel Pins - Various Materials.
|
Pins - Roll - Stainless Steel
304 and 420 grades DIN1481.
|
Stainless Steel Rod |  |
Rod - Round - Stainless Steel
For general hobby applications.
|
Shafting - Ground
Precision ground shafting. Various materials including silver steel, 303 304 316 416 stainless steel, hardened chrome steel.
|
Stainless Steel Shaft |  |
Shafting - Ground
Precision ground shafting. Various materials including silver steel, 303 304 316 416 stainless steel, hardened chrome steel.
|
Stainless Steel Shim / Sheet |  |
Shim - Stainless Steel
Shim sheet. Very thin to thick sizes. Includes 416, 303 and 316 grades.
|
Stainless Steel Springs |  |
Springs - Compression
|
Springs - Constant Force
|
Springs - Extension
|
Springs - Torsion - Left Hand Wound
|
Stainless Steel Tubing |  |
Tube - Round - Stainless Steel
For general hobby applications.
|
Standard Batteries |  |
Batteries - Standard
The Venom standard non-rechargeable battery range includes AA, AAA, C, D and 9V non-rechargeable.
|
Standoffs |  |
Pillars - Threaded
|
Standoffs - Hexagonal
Swage Type - Threaded - Brass or Stainless Steel.
|
Standoffs - Round
Swage Type - Threaded - Brass or Stainless Steel.
|
Star Knobs |  |
Knobs - Star - Female - 304 Stainless
|
Knobs - Star - Female - Plastic
|
Knobs - Star - Female - Soft
|
Knobs - Star - Male - Plastic
|
Knobs - Star - Male - Soft
|
Steel - Key |  |
Keys - Gib Head - Steel
|
Keys - Keysteel Lengths - Rectangular
|
Keys - Keysteel Lengths - Round
|
Keys - Keysteel Lengths - Square
|
Keys - Machine
|
Keys - Woodruff
|
Steel Balls |  |
Balls - Bored - Steel
Bored steel balls as used in steel rod ends.
|
Balls - Chrome Steel
Hardness: Rockwell C: 60-70.
|
Balls - Stainless Steel - 304 Grade
A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.
|
Balls - Stainless Steel - 316 Grade
A4 Grade. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.
|
Balls - Stainless Steel - 316L Grade
Easier to machine than standard 316 grade.
|
Balls - Stainless Steel - 440C Grade
Hardness: Rockwell C: 55-60.
|
Balls - Tungsten Carbide
Extreme hardness and wear resistance.
|
Hobby Balls - Steel
A selection of popular 440 Grade Stainless Steel balls.
|
Steel Bushes |  |
Bearings - Needle Roller - Inner Rings
Hardened sleeves for needle roller bearings.
|
Bushes - Aluminium - Frelon Lined
Self lubricating - Replaces oilite or plastic bearings.
|
Bushes - Bronze - Sintered - Flanged
Oil impregnated flanged sintered bronze bushes.
|
Bushes - Bronze - Solid
Solid precision LG2 bronze bushes.
|
Bushes - Steel - PTFE Lined - Split
Similar style to Glacier™ bushes.
|
Spacers - Hex - Threaded - Nylon
Threaded Hex Spacers.
|
Spacers - Round - Through Bore - Aluminium
Shaft spacers - Aluminium
|
Spacers - Square - Threaded
Threaded spacers.
|
Standoffs - Hexagonal
Swage Type - Threaded - Brass or Stainless Steel.
|
Standoffs - Round
Swage Type - Threaded - Brass or Stainless Steel.
|
Steel Rod Ends |  |
Rod Ends - Heavy Duty - Ball
With integral self aligning ball bearing.
|
Rod Ends - Heavy Duty - Ball - Enlarged Eye
With integral self aligning ball bearing.
|
Rod Ends - Heavy Duty - Ball - Reduced Eye
With integral self aligning ball bearing.
|
Rod Ends - Heavy Duty - Roller
With integral self aligning roller bearing.
|
Rod Ends - Steel - Bronze Lined
Imperial and Metric / Carbon steel and Stainless Steel.
|
Rod Ends - Steel - PTFE Lined
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon steel and Stainless Steel.
|
Steel Rollers |  |
Rollers - Idler - Ribbed - With Shaft
|
Rollers - Idler - Solid - With Shaft
|
Rollers - Idler - Stainless Steel
|
Rollers - Idler - With Aluminium Sleeve
Tolerance of Roller Outside Diameter (D) is ±0.075 mm
|
Rollers - Idler - With Sintered Bearing
|
Rollers - Steel
|
Rollers - Track - With Inner Race
|
Rollers - Track - Without Inner race
|
Steel Spacers |  |
Spacers - Round - Through Bore - Aluminium
Shaft spacers - Aluminium
|
Washers - Flat - Commercial - All Types
Includes all materials listed in other commercial washer categories.
|
Stem Gears - Metric Sizes |  |
Gears - Spur - Module 0.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 0.75 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 0.80 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 1.00 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 1.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 2.00 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 2.50 - Stem
Gears with integral shafts.
|
Gears - Spur - Module 3.00 - Stem
Gears with integral shafts.
|
Stem Gears - US Sizes |  |
Gears - Spur - 24 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 32 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 48 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 64 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 72 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 80 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 96 Pitch - Stem
303 stainless steel.
|
Gears - Spur - 120 Pitch - Stem
303 stainless steel.
|
Stepper Gearmotors |  |
Gearmotors - Stepper - Nema Size 17
|
Gearmotors - Stepper - Nema Size 23
|
Motors - Stepper - Drives with Gearheads
|
Motors - Stepper - With Gearheads to Match
Select motor and gearhead separately.
|
Stepper Motor Drive Modules |  |
Motors - Stepper - Drive Modules
|
Motors - Stepper - Drives with Gearheads
|
Stepper Motors |  |
Motors - Stepper - Drive Modules
|
Motors - Stepper - Drives with Gearheads
|
Motors - Stepper - Nema Size 17
NEMA SIZE 17 - 2 PHASE STEPPER MOTOR.
|
Motors - Stepper - Nema Size 23
NEMA SIZE 23 - 2 PHASE STEPPER MOTOR.
|
Motors - Stepper - Nema Size 34
NEMA SIZE 34 - 2 PHASE STEPPER MOTOR.
|
Motors - Stepper - Nema Size 42
NEMA SIZE 42 - 2 PHASE STEPPER MOTOR.
|
Motors - Stepper - With Gearheads to Match
Select motor and gearhead separately.
|
Stepper Motors - Hybrid |  |
Motors - Stepper - Hybrid - Nema Size 11
Mounting hole centres 23.10 mm (+/- 0.2 mm) - Body Width 28.00 mm.
|
Motors - Stepper - Hybrid - Nema Size 14
Mounting hole centres 26.00 mm - Body Width 35.00 mm.
|
Motors - Stepper - Hybrid - Nema Size 17
Mounting hole centres 31.00 mm - Body Width 42.00 mm.
|
Motors - Stepper - Hybrid - Nema Size 23
Mounting hole centres 47.00 mm - Body Width 56.40 mm.
|
Motors - Stepper - Hybrid - Nema Size 34
Mounting hole centres 69.60 mm - Body Width 85.85 mm.
|
Motors - Stepper - Hybrid - Nema Size 42
Mounting hole centres 88.90 mm - Flange Width 106.70 mm.
|
Stock - Spur Gear |  |
Gears - Pinion Wire - 24 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 32 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 44 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 48 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 64 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - Module 0.40
Brass.
|
Gears - Pinion Wire - Module 0.50
Brass.
|
Gears - Pinion Wire - Module 0.80
Brass.
|
Gears - Spur - Stock - 20 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 24 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 32 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - 48 Pitch
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.40
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.50
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 0.80
Lengths of spur gear stock for manufacturing gears.
|
Gears - Spur - Stock - Module 1.00
Lengths of spur gear stock for manufacturing gears.
|
Stock Lengths - Timing Belt |  |
Belts - Timing - Lengths
Sold per meter - Refer diagrams in timing belt listings for aspects of various pitches.
|
Stock Lengths - Timing Pulley |  |
Pulleys - Timing - 2.000mm Pitch - GT - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 2.032mm Pitch - MXL - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 3.000mm Pitch - GT - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 3.000mm Pitch - HTD - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 5.000mm Pitch - GT - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 5.000mm Pitch - HTD - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 5.000mm Pitch - T5 - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 5.080mm Pitch - XL - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 9.525mm Pitch - L - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Pulleys - Timing - 10.000mm Pitch - T10 - STOCK
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
|
Storage Boxes |  |
Cases - Equipment
Aluminium cases for your hobby equipment.
|
Straight Cut Bevel Gears |  |
Gears - Bevel - 24 Pitch
For 90 degree angle power transfer.
|
Gears - Bevel - 32 Pitch
For 90 degree angle power transfer.
|
Gears - Bevel - 48 Pitch
For 90 degree angle power transfer.
|
Gears - Bevel - 48 Pitch - Precision Matched Sets
Sold as sets. For 90 degree angle power transfer.
|
Gears - Bevel - 64 Pitch - Precision Matched Sets
Sold as sets. For 90 degree angle power transfer.
|
Gears - Bevel - 72 Pitch - Precision Matched Sets
Sold as sets. For 90 degree angle power transfer.
|
Gears - Bevel - Module 0.50
For 90 degree angle power transfer.
|
Gears - Bevel - Module 0.80
For 90 degree angle power transfer.
|
Gears - Bevel - Module 1.00
For 90 degree angle power transfer.
|
Gears - Bevel - Module 1.50
For 90 degree angle power transfer.
|
Gears - Bevel - Module 2.00
For 90 degree angle power transfer.
|
Gears - Bevel - Module 2.50
For 90 degree angle power transfer.
|
Gears - Bevel - Module 3.00
For 90 degree angle power transfer.
|
Straight Cut Mitre Gears |  |
Gears - Mitre - 16 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon.
|
Gears - Mitre - 24 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass and carbon steel.
|
Gears - Mitre - 32 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass and carbon steel.
|
Gears - Mitre - 48 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass, carbon steel and acetal.
|
Gears - Mitre - Module 0.50
1:1 Ratio. 20 Degree Pressure Angle - Brass and acetal.
|
Gears - Mitre - Module 0.60
1:1 Ratio. 20 Degree Pressure Angle - Stainless steel, brass, aluminium and acetal.
|
Gears - Mitre - Module 0.80
1:1 Ratio. 20 Degree Pressure Angle - Acetal and brass.
|
Gears - Mitre - Module 1.00
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
|
Gears - Mitre - Module 1.50
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
|
Gears - Mitre - Module 2.00
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
|
Gears - Mitre - Module 2.50
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
|
Gears - Mitre - Module 2.75
1:1 Ratio. 20 Degree Pressure Angle - Steel.
|
Gears - Mitre - Module 3.00
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
|
Gears - Mitre - Module 3.50
1:1 Ratio. 20 Degree Pressure Angle - Zinc die cast and steel.
|
Strip |  |
Strip - Carbon Fibre
High impact light weight carbon fibre for modelling.
|
Strip Airmovers |  |
Airmovers - Strip
Airmovers amplify air flow from a small supply of compressed air. Terrific for fume or smoke extraction or to move large volumes of light weight materials.
|
Stripped Thread Repair |  |
Inserts - Expansion
|
Inserts - Thread Repair
|
Inserts - Thread Repair - Assortments
|
Inserts - Thread Repair - Kits
|
Thread Repair Adhesive
|
Tools - Die Holders
Bar and round holders. 16mm, 20.64mm and 25.4mm (inch).
|
Tools - Dies
Tungsten Chrome Alloy - Carbon Steel. Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
|
Tools - Drill Bits
Micro miniature drill bits starting from 0.32mm up to larger standard sizes. Sutton - PN - Bordo.
|
Tools - Tap Wrenches
Tee handle and bar types. Suit taps from 1mm to 12mm.
|
Tools - Taps
High Speed Steel Short Machine and Carbon Steel Straight Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
|
Stroke Adjustment Shaft Collars |  |
Collars - Shaft - Stroke Adjustment
|
Stroke Rotary Bushings |  |
Bushings - Stroke Rotary - Miniature
2 to 12mm Shaft Sizes. Can operate in both linear and rotary directions at the same time.
|
Bushings - Stroke Rotary - Sealed
Stroke Rotary Bushing series can operate in both linear and rotary directions at the same time.
|
Studding - Threaded |  |
Threaded Rod - Aluminium
UNC and UNF light weight aluminium.
|
Threaded Rod - Brass
UNC - UNF - METRIC brass.
|
Threaded Rod - Plastic
UNC - UNF - METRIC - Nylon and PVC.
|
Threaded Rod - Stainless Steel
UNC - UNF - METRIC - 303, 304 and 316 grades.
|
Threaded Rod - Steel
UNC - UNF - METRIC - BSW - Includes plain and zinc plated, mild steel and high tensile.
|
Studs - Ball |  |
Studs - Ball - Threaded
|
Studs for Mounting Spring Powered Reels |  |
Reels - Spring Powered - Arbour Mounted - Mounting Stud
To suit arbour mounted spring reels.
|
Style E Speed Reducers |  |
Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1
Worm Gears - Precision.
|
Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
|
Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9
Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.
|
Super Ball Bushings |  |
Bearings - Linear - Ball - Thomson Super (Closed)
For running on shafts fixed at the ends.
|
|
Bearings - Linear - |