Rod Ends Aluminium Categories


Category Matches

Rod Ends Aluminium

TopHide Pictures

Rod Ends - Aluminium - Female - Hobby
Rod Ends - Aluminium - Female - Hobby

Search Rating: 100%

Aluminum Alloy Rod ends for RC Cars

Extended eye. Very loose eye.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod Ends - Aluminium - Female - Hobby.

Bar and Rod

TopHide Pictures

Rectangular Bar - Aluminium
Rectangular Bar - Aluminium

Search Rating: 63%

Also see combined categories:
All Rectangular Bar

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.


Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Aluminium
Rod - Round - Aluminium

Search Rating: 62%

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Allthread

TopHide Pictures

Threaded Rod - Allthread - Aluminium
Threaded Rod - Allthread - Aluminium

Search Rating: 61%

Also see combined categories:
All Threaded Rod

UNC and UNF light weight aluminium. Also known as booker rod.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Threaded Rod - Allthread - Aluminium.

Pins Pull

TopHide Pictures

Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Search Rating: 60%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.


Gears Inch Spur

TopHide Pictures

Gears - Spur - 48DP - Differential End - Aluminium
Gears - Spur -  48DP - Differential End - Aluminium

Search Rating: 60%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Differential End - Aluminium
Gears - Spur -  64DP - Differential End - Aluminium

Search Rating: 60%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Differential End - Aluminium
Gears - Spur -  72DP - Differential End - Aluminium

Search Rating: 60%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 96DP - Differential End - Aluminium
Gears - Spur -  96DP - Differential End - Aluminium

Search Rating: 60%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Shafting Aluminium

TopHide Pictures

Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Search Rating: 56%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Search Rating: 56%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Search Rating: 54%

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Clamps

TopHide Pictures

Clamp Kits - Timing Belt
Clamp Kits - Timing Belt

Search Rating: 53%

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:

Shafting Aluminium

TopHide Pictures

Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Search Rating: 51%

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


Shafting - Aluminium
Shafting - Aluminium

Search Rating: 51%

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


Gearboxes Inline

TopHide Pictures

Gearboxes - Inline - 63 x 40mm
Gearboxes - Inline -  63 x  40mm

Search Rating: 51%

Also see combined categories:
All Inline Gearboxes

J64 Series.

End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:

Magnets Ceramic

TopHide Pictures

Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit
Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit

Search Rating: 47%

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. Press fit. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Search Rating: 47%

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Enclosures

TopHide Pictures

Enclosures - Aluminium - Economy
Enclosures - Aluminium - Economy

Search Rating: 47%

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical projects.

Excellent screening properties for EMI and RFI. Ideal for projects subject to weather. Great housings for mechanical projects. Easy to machine. 380 Die Cast aluminium alloy BS1490 LM24. Close fitting flanged lids.


Knobs Pointer

TopHide Pictures

Knobs - Pointer - Aluminium and Plastic
Knobs - Pointer - Aluminium and Plastic

Search Rating: 47%

Also see combined categories:
All Pointer Knobs

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass Insert. White Pointer.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Knobs - Pointer - Aluminium and Plastic.

Tube and Tubing

TopHide Pictures

Tube - Streamline - Aluminium
Tube - Streamline - Aluminium

Search Rating: 47%

Also see combined categories:
All Metal Tube

Streamline Aluminium Tubing.

Teardrop shaped soft aluminium tubing. Enables easier bending. Great for tight applications.

Related Information:

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Aluminium
Screws - Thumb - Knurled  - Aluminium

Search Rating: 47%

Also see combined categories:
All Thumb Screws

Aluminum knurled head thumb screws


Snaps

TopHide Pictures

Snaps - Swivel Eye - Aluminium
Snaps - Swivel Eye - Aluminium

Search Rating: 47%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Knobs Pointer

TopHide Pictures

Knobs - Pointer - Black Aluminium
Knobs - Pointer - Black Aluminium

Search Rating: 47%

Also see combined categories:
All Pointer Knobs

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft.


Couplings Disk

TopHide Pictures

Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium

Search Rating: 47%

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:

Tube and Tubing

TopHide Pictures

Tube - Round - Aluminium
Tube - Round - Aluminium

Search Rating: 46%

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Shafting Aluminium

TopHide Pictures

Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Search Rating: 46%

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.


Rollers

TopHide Pictures

Rollers - Feed - With Aluminium Sleeve
Rollers - Feed - With Aluminium Sleeve

Search Rating: 46%

Also see combined categories:
All Rollers

Tolerance of Roller Outside Diameter (D) is +/-0.075 mm

Urethane 60 Durometer ground outside diameter. Aluminium sleeve. Feed rollers do not have a rotating bore. They are designed to turn with the shaft.

Related Information:

Spacers

TopHide Pictures

Spacers - Round - Through Bore - Aluminium
Spacers - Round - Through Bore - Aluminium

Search Rating: 46%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Aluminium


Bushes Bronze

TopHide Pictures

Bushes - Aluminium Bronze - Flanged
Bushes - Aluminium Bronze - Flanged

Search Rating: 46%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

Bushes - Aluminium Bronze - Graphite Plug - Flanged
Bushes - Aluminium Bronze - Graphite Plug - Flanged

Search Rating: 46%

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

Bushes - Aluminium Bronze - Graphite Plug - Unflanged
Bushes - Aluminium Bronze - Graphite Plug - Unflanged

Search Rating: 46%

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

Bushes - Aluminium Bronze - Unflanged
Bushes - Aluminium Bronze - Unflanged

Search Rating: 46%

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:

Enclosures

TopHide Pictures

Enclosures - Aluminium - 100 Series
Enclosures - Aluminium - 100 Series

Search Rating: 46%

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical or electrical projects.

Internal guide slots for mounting PCB assemblies vertically. Ideal for housing sensitive electrical, mechanical, pneumatic or hydraulic devices. Provides effective shielding of EMI and RFI. Designed to IP65 of IEC529 and NEMA 4 (dust and hoseproof). The lid incorporates a recessed neoprene gasket.


Sheet Metallic

TopHide Pictures

Sheet - Aluminium - T1100
Sheet - Aluminium - T1100

Search Rating: 46%

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


Sheet - Aluminium - T6061
Sheet - Aluminium - T6061

Search Rating: 46%

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T6061 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


Sheet - Aluminium - T7075
Sheet - Aluminium - T7075

Search Rating: 46%

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T7075 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 46%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Gears Inch Spur

TopHide Pictures

Gears - Spur - 120DP - Aluminium
Gears - Spur - 120DP - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 80DP - Aluminium
Gears - Spur -  80DP - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.318mm (1/80 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 96DP - Aluminium
Gears - Spur -  96DP - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.265mm (1/96 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Search Rating: 46%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

Gears Inch Spur

TopHide Pictures

Gears - Spur - 64DP - Aluminium
Gears - Spur -  64DP - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Aluminium
Gears - Spur -  72DP - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Screws Thumb

TopHide Pictures

Screws - Thumb - Knurled - Washer Face - Aluminium
Screws - Thumb - Knurled - Washer Face - Aluminium

Search Rating: 46%

Also see combined categories:
All Thumb Screws

Knurled head aluminum thumb screws with an integral washer


Gears Inch Internal

TopHide Pictures

Gears - Internal - 24 Diametrical Pitch - Aluminium
Gears - Internal - 24 Diametrical Pitch - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 32 Diametrical Pitch - Aluminium
Gears - Internal - 32 Diametrical Pitch - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 48 Diametrical Pitch - Aluminium
Gears - Internal - 48 Diametrical Pitch - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 64 Diametrical Pitch - Aluminium
Gears - Internal - 64 Diametrical Pitch - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 72 Diametrical Pitch - Aluminium
Gears - Internal - 72 Diametrical Pitch - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 96 Diametrical Pitch - Aluminium
Gears - Internal - 96 Diametrical Pitch - Aluminium

Search Rating: 46%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Nuts Hex

TopHide Pictures

Nuts - Hexagonal - Aluminium
Nuts - Hexagonal - Aluminium

Search Rating: 46%

Also see combined categories:
All Nuts

METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Search Rating: 46%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Search Rating: 46%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Aluminium
Gears - Spur - Module 1 - Aluminium

Search Rating: 46%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 2024 aluminium.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Washers Finishing

TopHide Pictures

Washers - Cup - Aluminium
Washers - Cup - Aluminium

Search Rating: 46%

Also see combined categories:
All Cup Washers

For countersunk screws.

Aluminium solid cup washers.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Washers - Cup - Aluminium.

Washers Flat Metallic

TopHide Pictures


Tube and Tubing

TopHide Pictures

Tube - Square - Aluminium
Tube - Square - Aluminium

Search Rating: 46%

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Collars

TopHide Pictures



Linear Slides

TopHide Pictures

Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium
Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium

Search Rating: 45%

Use with Utilitrak PW Crowned Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.

Related Information:

Shim

TopHide Pictures

Shim and Foil - Aluminium
Shim and Foil - Aluminium

Search Rating: 45%

Also see combined categories:
All Shim
All Sheet

Precision aluminium shim sheet. Includes listing on 6061-T6 Aluminium Sheet. Very thin to thick sizes.

NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Coloured shim is anodised. The colour is not removable. The colour is for identification purposes only.


Screws Button Head

TopHide Pictures

Screws - Button - Socket - Aluminium
Screws - Button - Socket - Aluminium

Search Rating: 45%

Also see combined categories:
All Machine Screws
All Socket Button Screws

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Button - Socket - Aluminium.

Screws Cap Head

TopHide Pictures

Screws - Cap - Socket - Aluminium
Screws - Cap - Socket - Aluminium

Search Rating: 45%

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Cap - Socket - Aluminium.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Socket - Aluminium
Screws - Countersunk - Socket - Aluminium

Search Rating: 45%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:

Screws Pan Head

TopHide Pictures

Screws - Pan Head - Aluminium
Screws - Pan Head - Aluminium

Search Rating: 45%

Also see combined categories:
All Machine Screws

UNC metal thread machine screws

Nuts sold separately - See Fasteners - Nuts.

Related Information:

Spacers

TopHide Pictures

Spacers - Hex - Threaded - Aluminium
Spacers - Hex - Threaded - Aluminium

Search Rating: 45%

Also see combined categories:
All Threaded Hex Spacers

Threaded Hex Spacers. Also known as coupling nuts.


Gears Inch Racks

TopHide Pictures

Gear Racks - 120DP - Aluminium - Side Holes
Gear Racks -  120DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

120 DP. Approx 0.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 24DP - Aluminium - Side Holes
Gear Racks -  24DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 32DP - Aluminium - Side Holes
Gear Racks -  32DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 48DP - Aluminium - Side Holes
Gear Racks -  48DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

48 DP. Approx 1.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 64DP - Aluminium - Side Holes
Gear Racks -  64DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

64 DP. Approx 1.25mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 72DP - Aluminium - Side Holes
Gear Racks -  72DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 80DP - Aluminium - Side Holes
Gear Racks -  80DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

80 DP. Approx 1.00mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 96DP - Aluminium - Side Holes
Gear Racks -  96DP - Aluminium - Side Holes

Search Rating: 45%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Linear Slides

TopHide Pictures

Linear Rail System - Aluminium - Carriages
Linear Rail System - Aluminium - Carriages

Search Rating: 45%

Match with rail by rail width dimension. Lightweight construction and easy installation.

Linear guide system with high load carrying capacity, rigity and torque resistance. Rollers are lubricated for life. Base plate anodised aluminium with factory fitted rollers. Elastic elements around the threaded bolts adjust and fix the rollers in the baseplate avoiding risk of mounting error. Supplied with a light preload to cover a wide variety of applications. Load data is for centrally acting loads. For eccentrically acting loads the data should be corrected according to the laws of mechanics. In the case of dynamic loads in the z-direction Fz should be corrected by a factor of 0.6.

Related Information:

Linear Rail System - Aluminium - Rail
Linear Rail System - Aluminium - Rail

Search Rating: 45%

Match with carriage by rail width dimension. Lightweight construction and easy installation.

Linear guide system with high load carrying capacity, rigity and torque resistance. Rollers are lubricated for life. Drawn and anodised aluminium body with hardened steel angle raceways fitted on each side.

Related Information:

Tools Cutting

TopHide Pictures

Tools - Rotary Files - Aluminium Cut
Tools - Rotary Files - Aluminium Cut

Search Rating: 45%

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel.


Gears Inch Spur

TopHide Pictures

Gears - Spur - 32DP - 20 Degree - Aluminium
Gears - Spur -  32DP - 20 Degree - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 20 Degree - Aluminium
Gears - Spur -  48DP - 20 Degree - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 20 Degree - Aluminium
Gears - Spur -  24DP - 20 Degree - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Housings with Bearing

TopHide Pictures

Housings - Igubal - Sliding
Housings - Igubal - Sliding

Search Rating: 45%

Also see combined categories:
All Housings with Integral Bearing

Housing: Aluminium. Insert: Sliding film Iglidur(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.

Related Information:

Linear Slides

TopHide Pictures

Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium
Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium

Search Rating: 45%

Use with Utilitrak PW Dual Vee Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.

Related Information:

Knobs Ball

TopHide Pictures

Knobs - Ball - Threaded - Polished Aluminium
Knobs - Ball - Threaded - Polished Aluminium

Search Rating: 45%

Also see combined categories:
All Female Threaded Ball Knobs

DIN319 Tapped aluminium

Polished with a flash chrome finish.


Nuts Lock

TopHide Pictures

Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Search Rating: 45%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Nuts - Hexagonal - Nylon Insert - Aluminium.

Pins Pull

TopHide Pictures

Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Search Rating: 45%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Search Rating: 45%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Gears Inch Helical

TopHide Pictures

Gears - Helical - 48 Pitch - Aluminium
Gears - Helical - 48 Pitch - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Helical Gears

2024 Aluminium


Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.6 - Aluminium
Gears - Mitre - Module 0.6 - Aluminium

Search Rating: 45%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 1.5 - Aluminium
Gears - Mitre - Module 1.5 - Aluminium

Search Rating: 45%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 1 - Aluminium
Gears - Mitre - Module 1 - Aluminium

Search Rating: 45%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Rollers

TopHide Pictures

Rollers - Urethane Feed - With Hub
Rollers - Urethane Feed - With Hub

Search Rating: 45%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Urethane coated aluminium alloy feed rollers with hub.

Roller - Urethane 60 Durometer, Ground Outside Diameter. Sleeve - Aluminium.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124109 products in 3085 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.