Nuts Lock Categories


Category Matches

Nuts Lock

TopHide Pictures

Nuts - Hexagonal - Locking
Nuts - Hexagonal - Locking

Search Rating: 100%

Also see combined categories:
All Lock Nuts

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.


Nuts - Aerotight
Nuts - Aerotight

Search Rating: 100%

Also see combined categories:
All Lock Nuts

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.


Nuts - Quick Release
Nuts - Quick Release

Search Rating: 99%

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.


Nuts - Hexagonal - Binx - Steel
Nuts - Hexagonal - Binx - Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Nuts - Hexagonal - Weld - Steel
Nuts - Hexagonal - Weld - Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.


Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Nuts - Hexagonal - Nylon Insert - Aluminium.

Nuts - Hexagonal - Nylon Insert - Brass
Nuts - Hexagonal - Nylon Insert - Brass

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Nylon Insert - Steel
Nuts - Hexagonal - Nylon Insert - Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Locknuts - Stainless Insert
Locknuts - Stainless Insert

Search Rating: 99%

Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (Pí) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.

Related Information:

Nuts - Hexagonal - Binx - Stainless Steel 304
Nuts - Hexagonal - Binx - Stainless Steel 304

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nuts - Hexagonal - Nylon Insert - Stainless Steel

Search Rating: 99%

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts Lock for Bearings

TopHide Pictures

Nuts - Lock - For Bearings - Face
Nuts - Lock - For Bearings - Face

Search Rating: 68%

Also see combined categories:
All Lock Nuts for Bearings


Nuts - Lock - For Bearings - Peripheral
Nuts - Lock - For Bearings - Peripheral

Search Rating: 68%

Also see combined categories:
All Lock Nuts for Bearings



Plungers Indexing

TopHide Pictures


Shock Absorbers

TopHide Pictures

Shock Absorbers - Lock Nuts
Shock Absorbers - Lock Nuts

Search Rating: 62%

Also see combined categories:
All Shock Absorbers


Springs Disc

TopHide Pictures

Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Search Rating: 60%

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock. Also known as belleville washers.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

Search Rating: 59%

Also see combined categories:
All Indexing Plungers

With thermoplastic knob


Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut
Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

Search Rating: 59%

Also see combined categories:
All Indexing Plungers

With thermoplastic knob



Plungers - Indexing - Grip - Stainless - With Nut
Plungers - Indexing - Grip - Stainless - With Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Plungers - Indexing - Grip - Stainless - Without Nut
Plungers - Indexing - Grip - Stainless - Without Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Plungers - Indexing - Grip - Steel - With Nut
Plungers - Indexing - Grip - Steel - With Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Plungers - Indexing - Grip - Steel - Without Nut
Plungers - Indexing - Grip - Steel - Without Nut

Search Rating: 56%

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn -Tee Handle - Locking
Latches - 1-4 Turn -Tee Handle - Locking

Search Rating: 56%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Clamps

TopHide Pictures

Clamp Kits - Timing Belt
Clamp Kits - Timing Belt

Search Rating: 56%

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn - L Handle - Key Locking - Padlockable
Latches - 1-4 Turn  - L Handle - Key Locking - Padlockable

Search Rating: 56%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Search Rating: 55%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Shaftloc

TopHide Pictures

Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Search Rating: 53%

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:

Plungers Indexing

TopHide Pictures

Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Search Rating: 51%

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:

Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Search Rating: 51%

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:

Screws Panel

TopHide Pictures

Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Search Rating: 49%

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Latches Cabinet

TopHide Pictures

Latches - Cabinet - Low Profile
Latches - Cabinet - Low Profile

Search Rating: 47%

Designed mainly for use on light cabinet doors and panels. A distinctive snap lets user know the latch is fully open or closed. Plug barrel and hex nuts are zinc diecast.

Cam, lock washer and screw are made from steel with a nickel plated finish. Hex type accepts 6.35mm (1/4 inch) hex tool. For use on panels up to 6.35mm (1/4 in.) thick. Straight cams.


Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn -L Handle - Coin Proof Slotted
Latches - 1-4 Turn -L Handle - Coin Proof Slotted

Search Rating: 45%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. The slot is recessed so it's inaccessible to a coin, but can be turned with a screwdriver to lock and unlock the handle. For more security there is provision to use a padlock.


Leadscrews

TopHide Pictures

Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Search Rating: 45%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:

Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Search Rating: 44%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 126935 products in 3077 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.