Categories that include the terms: MODEL and CAR and BEARING
If your 3 words are not all found, categories containing any two words will be shown.
|
RELEVANCE
***MEDIUM*** Some search words in header |
Bearings - Ball - Hobby |  |
Hobby Bearings - Model Engine
Popular engine bearings by size.
|
Model Jet Turbine Bearings
Bearings developed specifically for use in Model Jet turbines.
|
Model Jet Turbine Bearings | |
120 - 140000 Cipperer (Cat)
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
120 - 140000 Jesus Artes-Pedamarco
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
120 - 140000 RAM
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
1200AES - 13LB Simjet
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
1200ESSP - 17LB Simjet
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
120-140000 Simjet
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
2300AES - 25LB Simjet
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
3000AES - 30LB Simjet
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
600 - 12LB PST
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
600R - 14LB PST
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
60-70000 Schrechlin
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
700AES - 7LB Simjet
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
FS120 - 26.5LB Funsonic
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
FS52 - 12LB Funsonic
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
FS60 - 13.5LB Funsonic
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
J66-HP - 19LB Behotec
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
JB130 - 29LB Behotec
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
KJ66 Modified - 120 - 140000 Schrechlin
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
Mamba - 11.5LB SWB
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
Mercury HPES - 19.8 LB AMT Netherlands
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
MW-44 - 7.7LB Wren
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
MW-54 - 12LB Wren
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
MW-54MK2 - 12LB Wren
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
MW-54MK3 - 14LB Wren
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
P120 - 27LB Jetcat
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
P60 - 15LB Jetcat
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
P70 - 16LB Jetcat
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
P80 - 17LB Jetcat
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
RAM 500 - 12LB BVM
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
T-500 - 13.5LB Modellbauparadise
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
T-750 - 24LB Modellbauparadise
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
X80NS - 17.6 LBF Sky Pipe
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
RELEVANCE
**LOW** Any two search words found anywhere within group, category or descriptions |
Actuators - Leadscrew | |
Actuator - Leadscrew - High Duty
VHD Leadscrew: Teflon coated Stainless Steel. Anti-Backlash Nut: Self-lubricating Polyacetal. Base, Carriage & Rail Supports: Aluminium. Shafts & Bearings: Hardened Steel. Weight: 12kg.
|
Actuator - Leadscrew - Light Duty
ZBX Leadscrew: Teflon coated Stainless Steel. Anti-Backlash Nut: Self-lubricating Polyacetal. Base, Carriage & Rail Supports: Anodised Aluminium. Shafts & Bearings: Hardened Steel. Weight: 1.3kg.
|
Actuator - Leadscrew - Low Profile
Lead = Travel per revolution of screw. Rail, Carriage Plate & End Blocks: Aluminium Carriage Blocks: Die cast Zinc. Leadscrew: Steel. Bearings: Self lubricating DryLin® Plastic. Max. Permissible Radial Load: 2,800N (Static), 2,000N (Dynamic). Max. Permissible Thrust Load: 700N (Static), 0,23 MPa x m/s (Dynamic Trapezoidal Leadscrew), 0.08 x m/s (Axial Bearing).
|
Actuator - Leadscrew - Medium Duty
ZBX Leadscrew: Teflon coated Stainless Steel. Anti-Backlash Nut: Self-lubricating Polyacetal. Base, Carriage & Rail Supports: Anodised Aluminium. Shafts & Bearings: Hardened Steel. Weight: 3kg.
|
Ball Bearings | |
Bearings - Dental Applications
See Dental Handpiece Bearings and Orings for applications by model.
|
Bar | |
Rod - Round - Carbon Fibre
High impact light weight carbon fibre for modelling.
|
Bar - H Section | |
Bar - H - Carbon Fibre
High impact light weight carbon fibre for modelling.
Pultruded carbon fibre with a smooth epoxy coated finish
|
Bearings - Linear Slides | |
Linear Slide - Drylin - Carriage Assembly
Insensitive to dust and dirt. Match with Drylin Rail sold seperately.
|
Linear Slide - Drylin - Rail
Insensitive to dust and dirt. Match with Drylin Carriage Assembly sold seperately.
|
Bearings - One Way - Sprag | |
Bearings - One Way - Sprag - BR
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes. Designed for press fit installation.
|
Bearings - One Way - Sprag - TFS
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - One Way - Sprag - TSS
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - Press | |
Bearings - Press - Acetal - Flange Mounted
Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 Deg C. Self lubricating. Use any shaft material with 0.4 um or finer finish.
|
Bearings - Press - Needle Roller - Flange Mounted
Fitted with drawn cup needle bearing. -30 to 110 Deg C. Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer.
|
Bearings - Press - Sintered Bronze - Flange Mounted
Porous sintered bronze bearing. -28 to 95 Deg C. Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.
|
Bearings - Pressure Roller | |
Bearings - Pressure Roller - With Urethane OD
Bearings with Urethane Tyre on OD for applications requiring frictional movement.
For applications including paper and card dispensing and rolling (eg ATM Machines).
|
Bearings - Thrust | |
Bearings - Thrust - Ball - Washers Only
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.
|
Cam Followers - Roller Type | |
Cam Followers - Roller Type - Standard
Carbon steel roller type cam followers.
Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing.
|
Carbon Fibre Materials | |
Strip - Carbon Fibre
High impact light weight carbon fibre for modelling.
|
Tube - Rectangular - Carbon Fibre
High impact light weight carbon fibre for modelling.
|
Tube - Round - Carbon Fibre
High impact light weight carbon fibre for modelling.
|
Tube - Square - Carbon Fibre
High impact light weight carbon fibre for modelling.
|
Dental Handpiece Parts | |
Airotor Silent Cartridge Borden
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
Dental Handpiece Parts - Miscellaneous
A list of additional parts available for handpieces. Also see category Dental Handpiece Parts.
This category contains miscellaneous dental parts excluding tools, bearings and o-rings. Parts for specific handpiece models can be found under the brand name on the internet store main index.
|
Drylin - Linear - Miniature | |
Drylin - Linear - Carriages - Miniature
Linear sliding motion.
Slide Rail Material: Hard Anodised Aluminium. Slide Carriage Basic Body: Chromated Zinc. Slide Inserts: Maintenance-free sliding bearing Material Iglidur® J. Working Temperature Range: -40°C to +90°C. Maximum Sliding Speed: = 10 m/s (depending on load).
|
Drylin - Linear - Standard | |
Drylin - Linear - Pinion Assembly For Racks
Linear sliding motion.
Pinion Assembly Body: Aluminium. Gear: Stainless steel. Bearings: Steel. Working Temperature Range: 0°C to +60°C. Designed to be attached to TW carriages using specific rack rail.
|
Fishing Reel Parts | |
5230 1970 Models Abu Garcia
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
|
Gearboxes - Cross Axis | |
Gearboxes - Cross Axis - 47.0 x 40.0 x 22.0mm
Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 70.0 x 60.0 x 28.0mm
Worm and Wormwheel box. 2.5 to 8.8Nm. 5:1 to 120:1 ratios. P30 and PF30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 90.0 x 75.0 x 32.0mm
Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 110.0 x 95.0 x 38.0mm
Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 130.0 x 110.0 x 46.0mm
Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 150.0 x 125.0 x 54.0mm
Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 170.0 x 145.0 x 60.0mm
Worm and Wormwheel box. 38.0 to 164.0Nm. 5:1 to 120:1 ratios. P70 and PF70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Inline | |
Gearboxes - Inline - 50 x 40mm Hi Torque
JHD51 Series.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearheads - Inline | |
Gearheads - Inline - 50 x 40mm Hi Torque
Drilled and Tapped to suit your motor register.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Housings - Linear with Bearings | |
Housings - Linear - Pillow Block
Includes Bearings.
Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball Bushing™ Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).
|
Housings - Linear - Twin Pillow Block
Includes Bearings.
Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball Bushing™ Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).
|
Igubal Drylin® Bearings | |
Drylin - Linear - Carriages - Standard - Plain or Locking
Linear sliding motion.
|
Drylin - Linear - Slides and Carriages - Size 17
Linear sliding motion.
|
Drylin - Linear - Slides and Carriages - Size 27
Linear sliding motion.
|
Drylin - Linear - Slides and Carriages - Size 80
Linear sliding motion.
|
Linear Bearings | |
Carriage Assemblies - Utilitrak
Use with Utilitrak Guiderails
|
Guide Rails - Utilitrak
Use with Carriage Assemblies - Utilitrak
|
Shafting - Ground
Precision ground shafting. Various materials including silver steel, 303 304 316 416 stainless steel, hardened carbon steel, chrome vanadium alloy.
|
Pulleys - Flat Belt - Idler | |
Pulleys - Flat Belt - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
|
Pulleys - Timing - Idler | |
Pulleys - Timing - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
|
Pulleys - Vee - Idler | |
Pulleys - Vee - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
|
Snap Rings | |
Snaprings - External - Basic
Includes series M3200 / SP / ESP / M2400 / SW.
Carbon sping steel. Used to secure bearings.
|
Sprockets - Roller Chain | |
Sprockets - Roller Chain - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
|
Washers - Lock | |
Washers - Lock - Tabbed - Heavy Duty
Heavy duty WH / TW Series for bearing locknuts.
Carbon spring steel. Use with NH series locknuts.
|
Washers - Lock - Tabbed - MB Series
Standard MB series lockwasher for use with bearing locknuts.
Carbon spring steel. Use with N/AN and NL series locknuts.
|
Washers - Lock - Tabbed - W Series
Standard W/WS series lockwasher for use with bearing locknuts.
Carbon spring steel. Use with N/AN and NL series locknuts.
|
|
