magnets rubber and vinyl categories (Stocked Items Only)


Category Matches

Seals and Sealing

TopHide Pictures

Seals - Trim - Push On - Vinyl and Rubber
Seals - Trim - Push On - Vinyl and Rubber

Search Rating: 47%

Weatherstrip and trim by simply pushing over raw edges.


Magnets Alnico

TopHide Pictures

Magnets - Alnico - Bar
Magnets - Alnico - Bar

Search Rating: 27%

Also see combined categories:
All Magnets
All Alnico Magnets

Cast Alnico 5 bar


Magnets - Alnico - Minor Magnet
Magnets - Alnico - Minor Magnet

Search Rating: 27%

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper


Magnets - Alnico - Rod - Sintered
Magnets - Alnico - Rod - Sintered

Search Rating: 27%

Also see combined categories:
All Magnets
All Alnico Magnets

Alnico sintered ASA 8HC

Related Information:

Magnets Bar

TopHide Pictures

Magnets - Bar
Magnets - Bar

Search Rating: 27%

Also see combined categories:
All Magnets
All Bar Magnets

Great hobby and educational magnets for learning about magnetic attraction

These strong ferrite magnets can be used in hobbies or industrial applications. Non listed sizes can be ordered with minimum quantities often as low as 100 pieces. These are a basic magnet with unfinished edges. The nature of this product is that the edges chip easily so please don't rely on parts having an esthetically pleasing edge finish.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Magnets - Bar.

Magnets Ceramic

TopHide Pictures

Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit
Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit

Search Rating: 27%

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. Press fit. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Search Rating: 27%

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Blocks
Magnets - Ceramic Blocks

Search Rating: 27%

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Cylinder
Magnets - Ceramic Cylinder

Search Rating: 27%

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Ring
Magnets - Ceramic Ring

Search Rating: 27%

Also see combined categories:
All Magnets
All Ceramic Magnets


Magnets Cup

TopHide Pictures

Magnets - Cup Assemblies - Stud
Magnets - Cup Assemblies - Stud

Search Rating: 27%

Also see combined categories:
All Magnets
All Cup Magnets


Magnets Rare Earth

TopHide Pictures

Magnets - Rare Earth - Plated
Magnets - Rare Earth - Plated

Search Rating: 27%

Also see combined categories:
All Magnets
All Rare Earth Magnets

Incredibly strong attraction and repulsion. Neodymium-Iron-Boron encased in nickel jackets to protect the brittle magnet material and prevent corrosion.

High strength to weight ratios. Commonly used in miniature applications such as linear actuators, sensing applications, gyroscopes, flow meters, recording devices, pacemakers and alternators. Temperature range -73 oC to 93 oC. Size tolerances +/- 0.13.


Magnets - Rare Earth - Shielded
Magnets - Rare Earth - Shielded

Search Rating: 27%

Also see combined categories:
All Magnets
All Rare Earth Magnets

Insulator shield prevents loss of magnetic flux when inserted into steel components or fixtures

Shielded magnets supply holding forces in limited areas of steel tools, dies and fixtures.


Balls Rubber

TopHide Pictures

Balls - Rubber - Santoprene 40D
Balls - Rubber - Santoprene 40D

Search Rating: 26%

Also see combined categories:
All Rubber Balls
All Non Metallic Balls

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .95 g/cc. Hardness, Shore 40D. Tensile Strength 3000 psi. Melting Point 410 F. Rohs Compliant. Not FDA compliant. This grade is slightly harder than the 87A grade. Colour usually red but some sizes are beige.

Related Information:

Balls - Rubber - Santoprene 87A
Balls - Rubber - Santoprene 87A

Search Rating: 26%

Also see combined categories:
All Rubber Balls
All Non Metallic Balls

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .96 g/cc. Hardness, Shore 87A. Tensile Strength 2550 psi. Melting Point 400 F. Rohs Compliant and FDA compliant. This grade is slightly softer than the 40D grade. Colour Beige.

Related Information:

Shim

TopHide Pictures

Shims - Rubber
Shims - Rubber

Search Rating: 26%

Handy non marring soft spacer shims in a wedge shape

Level and stabilise appliances, desks, tables, filing cabinets, machinery. Stackable. Vibration cushioning. Ribs ensure that wedges grab tight and stay in place. Black ridid wedges can support up to 2000 lbs. White flexible wedges can be trimmed with a utility knife.


Seals and Sealing

TopHide Pictures

Grommets - Rubber - EPDM
Grommets - Rubber - EPDM

Search Rating: 26%

Also see combined categories:
All Open Rubber Grommets
All Rubber Grommets

EPDM Rubber Grommets

50 +/-5 Durometer. Easy to install. Good Vibration and Shock Control. Protects Wire, Cable and Hoses. Also see snap bushings for a hard plastic product serving a similar purpose.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Grommets - Rubber - EPDM.

Grommets - Rubber - EPDM - Closed
Grommets - Rubber - EPDM - Closed

Search Rating: 26%

Also see combined categories:
All Closed Rubber Grommets
All Rubber Grommets

Closed EPDM Rubber Grommets

50 +/-5 Durometer. Dustproof with Approx 0.5mm thick Membrane. Easy to Install. Dust protection. Also see snap bushings for a hard plastic product serving a similar purpose.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Grommets - Rubber - EPDM - Closed.

Grommets - Rubber - Natural
Grommets - Rubber - Natural

Search Rating: 26%

Also see combined categories:
All Open Rubber Grommets
All Rubber Grommets

Natural Rubber Grommets

50 +/-5 Durometer. Easy to Install. Good Vibration and Shock Control. Protects Wire, Cable and Hoses. Also see snap bushings for a hard plastic product serving a similar purpose.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Grommets - Rubber - Natural.

Grommets - Rubber - Natural - Closed
Grommets - Rubber - Natural - Closed

Search Rating: 26%

Also see combined categories:
All Closed Rubber Grommets
All Rubber Grommets

Closed Natural Rubber Grommets

50 +/-5 Durometer. Dustproof with Approx 0.5mm thick Membrane. Easy to Install. Dust protection.

Related Information:

Washers Flat Rubber

TopHide Pictures


Throwing Planes

TopHide Pictures

Toys - Planes - Rubber Band and Throwing
Toys - Planes - Rubber Band and Throwing

Search Rating: 26%

Also see combined categories:
All Games and Gadgets

Inexpensive foam gliders, planes and Twirly Propellers

Includes a tremendous paper plane making kit with instructions for 20 plane designs.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Toys - Planes - Rubber Band and Throwing.

Bumpers

TopHide Pictures

Bumpers - Cylindrical - Rubber
Bumpers - Cylindrical - Rubber

Search Rating: 26%

Also see combined categories:
All Cylindrical Bumpers

Built in steel screw for easy instrallation. Made with abrasion resistant SBR rubber. Resistant to abrasion and oxidation. Excellent cushioning and vibration control.

Non staining, non marring polyurethane. Sold by the pad - number of bumpers per pad shown in the listings. Peel off and apply. Clear. 60-70 Shore A hardness.


Bumpers - Domed - Rubber
Bumpers - Domed - Rubber

Search Rating: 26%

Built in steel screw for easy instrallation. Made with abrasion resistant SBR rubber. Resistant to abrasion and oxidation. Excellent cushioning and vibration control.

Non staining, non marring polyurethane. Sold by the pad - number of bumpers per pad shown in the listings. Peel off and apply. Clear. 60-70 Shore A hardness.


Suspension Units

TopHide Pictures

Suspension Units - Rubber - Square - Insert Type
Suspension Units - Rubber - Square - Insert Type

Search Rating: 26%

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Wheels Industrial

TopHide Pictures

Wheels - Industrial - Plastic - Rubber Tyred
Wheels - Industrial - Plastic - Rubber Tyred

Search Rating: 26%

Also see combined categories:
All Wheels

Suitable for lawn mowers, trolleys, carts etc

Wheel loadings include a safety factor of 3. Low noise. Low friction.

Related Information:

Oil Seals

TopHide Pictures

Oil Seals - Fluoroelastomer Rubber
Oil Seals - Fluoroelastomer Rubber

Search Rating: 26%

Also see combined categories:
All Oil Seals

DIN 3760 - High Temperature and chemical resistance.

Operating Temp. Range: -20oC to +240oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis.


Oil Seals - Nitrile Rubber
Oil Seals - Nitrile Rubber

Search Rating: 26%

Also see combined categories:
All Oil Seals

DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifivally required please let us know when ordering.

Operating Temp. Range: -30oC to +90oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.


O-Rings

TopHide Pictures

O-Rings - EPDM Rubber
O-Rings - EPDM Rubber

Search Rating: 26%

Also see combined categories:
All O-Rings

Suitable for heated water and steam.

Temperature Range: -55oC to +150oC. Chemically resistant to Hydraulic Fluids. Resistant to alcohols, glycol engine coolants and SKY-DROL (phosphate ester hydraulic fluid).


O-Rings - Neoprene Rubber
O-Rings - Neoprene Rubber

Search Rating: 26%

Also see combined categories:
All O-Rings

Excellent resistance to ageing and weathering effects.

Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones.

Related Information:

O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Search Rating: 26%

Also see combined categories:
All O-Rings

General purpose.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Related Information:

O-Rings - Silicone Rubber
O-Rings - Silicone Rubber

Search Rating: 26%

Also see combined categories:
All O-Rings

High thermal resistance and cold flexibility.

Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.


Universal Joint Covers

TopHide Pictures

Covers - Universal Joint - Elasticate Rubber
Covers - Universal Joint - Elasticate Rubber

Search Rating: 26%

Also see combined categories:
All Universal Joint Covers

For Single and Double Universal Joints.

-27 oC to 70 Deg C temp range (constant). -32 oC to 120 Deg C temp range (intermittent).

Related Information:

Mounts Cylindrical

TopHide Pictures

Mounts - Cylindrical - Square
Mounts - Cylindrical - Square

Search Rating: 26%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.


Suction Cups

TopHide Pictures

Suction Cups
Suction Cups

Search Rating: 25%

EPDM or Natural Rubber as listed against each item

EPDM is a higher grade rubber that rates excellent for ozone resistance and is used for molded parts used outdoors. SBR is Styrene-butadiene Rubber is a general purpose rubber but not recommended for continual use outdoors or in oily environments.


Gearmotors Permanent Magnet

TopHide Pictures

Gearmotors - DC PM - Size 70x114
Gearmotors - DC PM - Size 70x114

Search Rating: 25%

Also see combined categories:
All DC Permanent Magnet Gearmotors

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.


Backup Rings

TopHide Pictures

Rings - Backup
Rings - Backup

Search Rating: 25%

Durometer 90 Nitrile Rubber back up rings.


Mounts Cylindrical

TopHide Pictures

Mounts - Cylindrical - Female to Blank
Mounts - Cylindrical - Female to Blank

Search Rating: 25%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:

Mounts - Cylindrical - Female to Female
Mounts - Cylindrical - Female to Female

Search Rating: 25%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:

Mounts - Cylindrical - Male to Female
Mounts - Cylindrical - Male to Female

Search Rating: 25%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:

Mounts - Cylindrical - Male to Male
Mounts - Cylindrical - Male to Male

Search Rating: 25%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:

Latches Draw

TopHide Pictures

Latches - Draw - T-Handle - Stainless Steel
Latches - Draw - T-Handle - Stainless Steel

Search Rating: 25%

Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Urethane
Rod - Round - Urethane

Search Rating: 25%

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent.

Related Information:

Mounts Cylindrical

TopHide Pictures

Mounts - Cylindrical - Male to Blank - Flat Top
Mounts - Cylindrical - Male to Blank - Flat Top

Search Rating: 25%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Related Information:

Mounts Bonded

TopHide Pictures

Mounts - Bonded - Two Piece
Mounts - Bonded - Two Piece

Search Rating: 25%

Also see combined categories:
All Bonded Mounts

Steel insert overcoated with rubber joins the two pieces.


Mounts Centrebolt

TopHide Pictures

Mounts - Centre Bolt - Solo Unitised
Mounts - Centre Bolt - Solo Unitised

Search Rating: 24%

Also see combined categories:
All Centrebolt Mounts

Vibration dampening

Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.


Knobs Ball

TopHide Pictures

Knobs - Ball - Threaded - Soft Touch
Knobs - Ball - Threaded - Soft Touch

Search Rating: 24%

Also see combined categories:
All Female Threaded Ball Knobs

Rugged thermoplastic construction with a soft feel. Moulded with a soft rubber shell providing a sure grip. Zinc plated steel insert.


Pulleys Grooved

TopHide Pictures

Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Search Rating: 24%

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Pulleys - Geared - Hobby.

Couplings Insert and Jaw

TopHide Pictures

Couplings - Spider Type B - Hubs Only
Couplings - Spider Type B - Hubs Only

Search Rating: 23%

Match 2 hubs with a spider from the spiders category. Match only rubber spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Metal hubs to suit rubber spiders type B.

Related Information:

Gearboxes Cross Axis

TopHide Pictures

Gearboxes - Cross Axis - 150 x 96 x 96 A
Gearboxes - Cross Axis - 150 x  96 x  96 A

Search Rating: 22%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Search Rating: 22%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Cam Followers

TopHide Pictures

Cam Followers - Roller Type - Stainless Steel
Cam Followers - Roller Type - Stainless Steel

Search Rating: 22%

Also see combined categories:
All Cam Followers

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:

Couplings Insert and Jaw

TopHide Pictures

Couplings - Spider Type B - Complete
Couplings - Spider Type B - Complete

Search Rating: 17%

Also see combined categories:
All Insert and Jaw Type Couplings

Max 3600 RPM. 0.39 to 16.27 Nm. Match only hubs and spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Rubber spider and metal hubs.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124193 products in 3084 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.