Latches Small Lever Categories (Short Delivery Items)


Category Matches

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn - Simple
Latches - 1-4 Turn - Simple

Search Rating: 100%

With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Search Rating: 99%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches Compression

TopHide Pictures

Latches - Compression - Lift and Turn - Straight Handle
Latches - Compression - Lift and Turn - Straight Handle

Search Rating: 97%

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Comes with mounting hardware. Max working load 44kg. M5 mounting screws supplied. For panels thicker than 6.35mm a longer screw and lockwasher combination will be required.


Latches Draw

TopHide Pictures

Latches - Draw - Over Centre - 300 Grade Stainless Steel
Latches - Draw - Over Centre - 300 Grade Stainless Steel

Search Rating: 97%

Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.

Keepers included. Type SC-97533 has a hole for a padlock.


Latches - Draw - T-Handle - Stainless Steel
Latches - Draw - T-Handle - Stainless Steel

Search Rating: 97%

Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Latches Other

TopHide Pictures

Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip

Search Rating: 97%

Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.


Latches - 200 Series - Heavy Duty
Latches - 200 Series - Heavy Duty

Search Rating: 97%

Ultimate strength 660kg. Working strength 265kg.

Heavy Duty.


Latches - Spring Loaded
Latches - Spring Loaded

Search Rating: 97%

Steel construction with either black enamel or chrome finish. 90o or straight mounting options. Keeper included.


Latches Rotary Action

TopHide Pictures

Latches - Rotary Action - Link Lock - Keepers
Latches - Rotary Action - Link Lock - Keepers

Search Rating: 97%

Required for link lock rotary action latches. Match keeper with correct latch from selection.


Latches - Rotary Action - Link Lock - Rivetted - Stainless
Latches - Rotary Action - Link Lock - Rivetted - Stainless

Search Rating: 97%

Lift and rotate wing to operate.

Keepers not included and must be purchased separately.

Related Information:

Latches Slam Action

TopHide Pictures

Latches - Slam Action - Slide
Latches - Slam Action - Slide

Search Rating: 97%

Fast snap in installation. Made from non-corrosive materials, black ABS plastic and stainless steel spring. Push to close latching.


Latches Other

TopHide Pictures

Latching Handles - Outside Door - Heavy Duty
Latching Handles - Outside Door - Heavy Duty

Search Rating: 93%

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.


Tools Pullers

TopHide Pictures

Tools - Pullers - Small
Tools - Pullers - Small

Search Rating: 84%

Also see combined categories:
All Tools

Small pullers for miniature bearings, gears, pulleys, sprockets and other pressed on parts.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - Pullers - Small.

Levers

TopHide Pictures

Levers - Clamp
Levers - Clamp

Search Rating: 81%

Also see combined categories:
All Levers

Steel Parts: Quality class 5.8. Handle: Diecast zinc to DIN 1743 or Glass fibre reinforced plastic with toothed wheel in diecast zinc. Surface Finish: Handle plastic coated. Steel parts black oxide finish.


Levers - Clamp - Quick Release
Levers - Clamp - Quick Release

Search Rating: 81%

Also see combined categories:
All Levers

Handles: Die-cast zinc or plastic. Internal thread: mechanism made from carbon steel. The thru-hole clamping lever allows for quick clamping on long thread lengths.


Knobs Lever

TopHide Pictures

Knobs - Lever
Knobs - Lever

Search Rating: 81%

Also see combined categories:
All Levers
All Knobs

Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.


Fishing Reel Parts

TopHide Pictures

45 GLS Lever Drag Penn Parts
45 GLS Lever Drag Penn Parts

Search Rating: 80%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of 45 GLS Lever Drag Penn Parts.

Spring Assemblies

TopHide Pictures

Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO

Search Rating: 80%

Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:

Vee Belts

TopHide Pictures

Belts - Vee - 10.0 x 6.0mm - Z
Belts - Vee - 10.0 x 6.0mm - Z

Search Rating: 80%

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 6.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Belts - Vee - 8.0 x 4.0mm
Belts - Vee -  8.0 x 4.0mm

Search Rating: 80%

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 8.0mm Top Width x 4.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Games Amusement

TopHide Pictures

Masks
Masks

Search Rating: 79%

Small selection of fun masks


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Masks.

Vee Belts

TopHide Pictures

Belts - Vee - 10.0 x 5.5mm - M-3L
Belts - Vee - 10.0 x 5.5mm - M-3L

Search Rating: 79%

Also see combined categories:
All Vee Belts 8mm and 10mm Top Width

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

Belts - Wedge - 9.7 x 8.0mm - SPZ - 3V
Belts - Wedge -  9.7 x 8.0mm - SPZ - 3V

Search Rating: 79%

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Miniature and small belts. 9.7mm Top Width x 8.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:

Pulleys Grooved

TopHide Pictures

Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Search Rating: 78%

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Pulleys - Geared - Hobby.

Motors Stepper

TopHide Pictures

Motors - Stepper - Basic Hobby
Motors - Stepper - Basic Hobby

Search Rating: 78%

Also see combined categories:
All Stepper Motors

Small light weight stepper motor for your hobby or light duty projects


Gearmotors Basic

TopHide Pictures

Gearmotors - Basic - Hobby - 12.1mm Diameter
Gearmotors - Basic - Hobby - 12.1mm Diameter

Search Rating: 77%

Also see combined categories:
All Basic Gearmotors

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Gearmotors - Basic - Hobby - 12.1mm Diameter.

Cable Ties

TopHide Pictures

Ties - Cable - Standard
Ties - Cable - Standard

Search Rating: 77%

Also see combined categories:
All Cable Ties

Cable ties small to large. Light to heavy duty.


Threaded Rod

TopHide Pictures

Threaded Rod - Unthreaded Centre - Steel
Threaded Rod - Unthreaded Centre - Steel

Search Rating: 76%

Also see combined categories:
All Threaded Rod

UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Threaded Rod - Unthreaded Centre - Steel.

Hobby Accessories

TopHide Pictures

Accessories - Hobby - Body Clips
Accessories - Hobby - Body Clips

Search Rating: 76%

Large and small body clips. Fluoro or standard. Plastic coated or anodised. Range of colours. Bent and straight.

See also large selection of clips in R-Clips.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Accessories - Hobby - Body Clips.

Screws Countersunk

TopHide Pictures

Screws - Countersunk - Stainless - Pozidrive
Screws - Countersunk - Stainless - Pozidrive

Search Rating: 75%

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric small selection only.

Nuts sold seperately - See Nuts.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Screws - Countersunk - Stainless - Pozidrive.

Bar and Rod

TopHide Pictures

Rectangular Bar - Aluminium
Rectangular Bar - Aluminium

Search Rating: 73%

Also see combined categories:
All Rectangular Bar

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.


Parts Boxes

TopHide Pictures

Parts Boxes - Tins
Parts Boxes - Tins

Search Rating: 72%

Also see combined categories:
All Parts Boxes

Parts tins. Great for kids and adults alike. Store your small valuables.

Classic small storage tins with a beautiful picture. Store game pieces, jewellery, cards and other small items.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Parts Boxes - Tins.

Parts Boxes - Clear Plastic
Parts Boxes - Clear Plastic

Search Rating: 69%

Also see combined categories:
All Parts Boxes

Plastics clear compartmented parts boxes with flip lids.

Plastic hinged lid. Quality catch to secure contents. Ideal for storing small parts. Includes Fischer brand and others. Also includes a small membrane box for displaying small items like coins or jewellery.


Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Stainless - Precision
Ball Transfer Units - Screw Stem - Stainless - Precision

Search Rating: 65%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Search Rating: 65%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Chain and Sprockets Roller

TopHide Pictures

Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore

Search Rating: 65%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm duplex chain (08B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch.

Related Information:

Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Search Rating: 65%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Handles

TopHide Pictures

Handles - Adjustable - Stud
Handles - Adjustable - Stud

Search Rating: 63%

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Housings with Bearing

TopHide Pictures

Housings - Bearing - Flanged - Miniature - Self Aligning
Housings - Bearing - Flanged - Miniature - Self Aligning

Search Rating: 63%

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.


Housings - Bearing - Pedestal - Miniature - Self Aligning
Housings - Bearing - Pedestal - Miniature - Self Aligning

Search Rating: 63%

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad
Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad

Search Rating: 61%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.

303 Stainless Steel. Nylon pad for glide applications.


Shafting General Purpose

TopHide Pictures

Rod - Drill - Oil Hardening - 480 Series
Rod - Drill - Oil Hardening - 480 Series

Search Rating: 60%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Suspension Units

TopHide Pictures

Suspension Units - Rubber - Square - Insert Type
Suspension Units - Rubber - Square - Insert Type

Search Rating: 60%

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Games Amusement

TopHide Pictures

Games - Jokes - Gags - Tricks
Games - Jokes - Gags - Tricks

Search Rating: 56%

Also see combined categories:
All Games and Gadgets

Fake poo, magic tricks, painless pearcings, marked cards, dice tricks, coin tricks, rope trick and much more

Practical jokes, Small Games, Stocking Fillers. Magic tricks - Fuzzy Worms. Party tricks - Electric Shock Lighters. Gimmicks and other fun stuff. Pop Eyed Freaky Face Keyring, Horror Skull, UFO Solar Balloon, Mood Ring (moodstone ring), Glow Moon Stones, Funky Gadgets.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Games - Jokes - Gags - Tricks.

Chain and Sprockets Roller

TopHide Pictures

Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 52%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Sprockets -  9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 52%

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 51%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates -  9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 51%

Also see combined categories:
All Sprockets for Roller Chain

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 51%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.85mm simplex chain (40-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 40-1 - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Hobby Shafting

TopHide Pictures

Shafting - Ground - Hobby - Steel
Shafting - Ground - Hobby - Steel

Search Rating: 50%

Also see combined categories:
All Shafting
All Steel Shafting

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Shafting - Ground - Hobby - Steel.

Chain and Sprockets Roller

TopHide Pictures

Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 50%

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.85mm simplex chain (40-1 ASA)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 50%

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 50%

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 50%

Also see combined categories:
All Sprockets for Roller Chain

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Search Rating: 50%

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:

Vee Belts

TopHide Pictures

Belts - Vee - 12.5 x 9.0mm - A-4L
Belts - Vee - 12.5 x 9.0mm - A-4L

Search Rating: 49%

Also see combined categories:
All Vee Belts 12.5mm and 12.7mm Top Width

12.5mm Top Width x 9.0mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Related Information:

Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Acetal
Rod - Round - Acetal

Search Rating: 44%

Also see combined categories:
All Plastic Rod

Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.41 g/cm3 - Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa / Hardness 80 Rockwell M. Small diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124306 products in 3086 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.