Latches Other
Ultimate strength 145kg. Working strength 120kg.
You may also be interested in
Handles
Adjustable Handles with Stud
Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space. This category may be available in the new MBA online store at
Handles - Adjustable - Stud.
Adjustable Handles
Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with either a Tapped or Reamed Hole. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the insert remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space. This category may be available in the new MBA online store at
Handles - Adjustable - Tapped and Reamed.
Tensioners
Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.
Idler shaft and pulleys not included with tensioner. This category may be available in the new MBA online store at
Tensioner - Adjustable Screw.
Related Information:
Pins Clevis
Multihole clevis pins for quick and easy adjustments
Related Information:
Tensioners
Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.
Related Information:
Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.
Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360
o controlled tensioning. Serrated teeth to prevent slippage once tightened. This category may be available in the new MBA online store at
Tensioner - Drive - Adjustable Flanged.
Related Information:
Gas Springs
Shock Absorbers
Adjusters
Adjustable supports for all kinds of machinery.
Mild steel bright zinc plated. Screwdriver cross recess in base. Use as mounting feet. This category may be available in the new MBA online store at
Adjusters - Rigid.
Related Information:
Adjustable supports for all kinds of machinery. Mounting feet levelers.
Stem: Mild steel bright zinc plated. Base: Polythene or Polypropylene. Angle of Tilt: 25o from perpendicular. Hexagon Nut: 12mm A/F. Standard colour: Black.
Related Information:
Shock Absorbers
Belts Poly Vee
Belts include a tensile cord, most suited for industrial or adjustable applications
Poly Vee are ideal for high ratio and high speed drives. J Section polyvee is 2.34mm pitch and 3.56mm belt height. Note, this series is not a strechable type of belt. The belt width wll be determined by the number of ribs x the pitch. This category may be available in the new MBA online store at
Belts - Poly V - J Section.
Related Information:
Quickly repairs damaged screws
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
Required for Thread Setter Tool
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
Related Information:
Vee grooved track roller bushings.
Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned. This category may be available in the new MBA online store at
Dual Vee - Adaptor Bushings.
Related Information:
With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.
The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. This category may be available in the new MBA online store at
Latches - 1-4 Turn - Simple.
Zinc plated steel 7.94mm (5/16in.) square shank.
This category may be available in the new MBA online store at
Handles - Tee.
Zinc finished iron/steel construction. Has 5/16in. Square shank.
Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.
Used with toggle latches series 800, 802, 803 and 806
Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.
90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.
Related Information:
Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.
Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load. OSHA Yellow Steel Cover over elastomer base.
Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).
Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring. This category may be available in the new MBA online store at
Circlips - External - Grooveless.
Related Information:
Used to maintain radial integrity and eliminate the need for parallel shafting.
Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads. This category may be available in the new MBA online store at
Housings - Linear - Square.
High capacity, square gib slides are ideal for precision machine tool applications.
The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.
Self compensation
Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.
Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals. This category may be available in the new MBA online store at
Catches - Compression Spring.
Draw pull catches are available in either steel or 304 stainless. Strike is included.
Strong and light polyacetal and polyamide. Holds cabinets secure with 7kg of pull force.
Various styles - refer pictures
Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.
Related Information:
Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.
Related Information:
304 Stainless Steel and Polyurethane
Polyacetal catch and strike with polyethylene rollers. Ideal in corrosive environments.
Mounts inside your enclosure. Installs either right or left side by inverting. Use 4 gauge screws or 1/8in (3.125mm) rivets to install.
Fast economical installation.
Fits frames from 1.1 to 7.1mm thick. Installation hole size 15mm x 39.9mm. Push to close and pull to open. Spring loaded over centre action. Corrosion resistant black ABS with 303 stainless steel spring.
Patented quick clamp is ideal for door openings on bins, hoppers, tanks and manholes. T-Handle allows torque without tools. The one piece unit is made from highly polished 304 stainless steel.
Full 50.8mm adjustment. 180
o pivot when disengaged leaving access doorway unobstructed. Will not loosen through vibration. Brackets supplied for easy installation. This category may be available in the new MBA online store at
Clamps - Lorenz.
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.