About Us Brands Download Contact Counter Sales FAQ Freight Payments Products Search Site Technical More Links...

Housings Linear Square Categories


Category Matches

Housings - Linear with Bearings

TopHide Pictures

Housings - Linear - Square
Housings - Linear - Square

Search Rating: 100%

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.


Housings - Linear without Bearings

TopHide Pictures

Housings - Linear - Square - Clamps
Housings - Linear - Square - Clamps

Search Rating: 100%

Also see combined categories:
All Linear Bearing Housings


Housings - Linear with Bearings

TopHide Pictures

Housings - Linear - Pillow Block - Closed - Ceramic Coated
Housings - Linear - Pillow Block - Closed - Ceramic Coated

Search Rating: 68%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.







Housings to Suit Ball Bearings

TopHide Pictures

Housings - Bearing - Square - Miniature
Housings - Bearing - Square - Miniature

Search Rating: 68%

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.


Bearings and Housings Insert Type

TopHide Pictures

Housings - Bearing - Flanged - Square - Cast Iron
Housings - Bearing - Flanged - Square - Cast Iron

Search Rating: 68%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Housings with Integral Bearing

TopHide Pictures

Housings - Bearing - Flanged - Square - W300
Housings - Bearing - Flanged - Square - W300

Search Rating: 68%

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.


Housings - Linear with Bearings

TopHide Pictures

Housings - Bearing - Flange Mounted - Frelon - Self Aligning
Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Search Rating: 67%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.


Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Search Rating: 67%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.


Housings - Bearing - Pillow Block - Frelon - Precision - Open
Housings - Bearing - Pillow Block - Frelon - Precision - Open

Search Rating: 67%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.


Housings - Bearing - Pillow Block - Frelon - Standard - Closed
Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Search Rating: 67%

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.


Housings - Bearing - Pillow Block - Frelon - Standard - Open
Housings - Bearing - Pillow Block - Frelon - Standard - Open

Search Rating: 67%

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.


Square Shaft

TopHide Pictures

Shafting - Linear - Square
Shafting - Linear - Square

Search Rating: 63%


Suspension Units

TopHide Pictures

Suspension Units - Rubber - Square - Insert Type
Suspension Units - Rubber - Square - Insert Type

Search Rating: 62%

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Linear Slides

TopHide Pictures

Linear Slide Assemblies - Plain - Low Profile - High Load
Linear Slide Assemblies - Plain - Low Profile - High Load

Search Rating: 61%

Also see combined categories:
All Linear Slide Assemblies

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.


Bearings Linear

TopHide Pictures

Bearings - Linear - Ball - Closed
Bearings - Linear - Ball - Closed

Search Rating: 60%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Clamping Rings

TopHide Pictures

Rings - Retaining - PR Type Internal - For Linear Bearings
Rings - Retaining - PR Type Internal - For Linear Bearings

Search Rating: 60%

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


Bearings Linear

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 57%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Linear Slides

TopHide Pictures

Rail Systems - Type 1 - Linear - Precision - Rails
Rail Systems - Type 1 - Linear - Precision - Rails

Search Rating: 49%

Also see combined categories:
All Type 1 Carriages and Rails

Match with carriages by Size Column

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:

Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged
Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Search Rating: 48%

Also see combined categories:
All Type 1 Carriages and Rails

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:

Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow
Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow

Search Rating: 48%

Also see combined categories:
All Type 1 Carriages and Rails

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Related Information:

Bearings and Housings Insert Type

TopHide Pictures

Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium
Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium

Search Rating: 37%

Starting at 8mm bore size, aluminium silver series housings with removable chrome steel bearing



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Adhesives Adjusters Air Springs Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Balsa Bar Batteries Bearings Acetal Bearings Angular C... Bearings Automotive Bearings Ball Bearings Conveyor Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale Bearings Tapered R... Bearings Thrust Bearings and Housi... Bearings for Denta... Bearings for Housings

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bearings for Skating Bearings for Wheel... Belts Rounthane Books Bottles and Cans Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Cable Cable Ties Cam Followers Cams Carburettor Parts Carousels Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Circlips Clamping Bushings Clamping Rings Clamps Clevis Joints Clips Cloth Clutches Collars Collectibles Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Other Couplings Rigid Cranks and Wheels

Visa Card Accepted
Visa
Secure Checkout


Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Disk Cleaning Machine Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Dubro Accessories Easy Selection Kits Educational Projects Electrical Wire Enclosures Engineering and Ho... Eyebolts Fastening Bushings Fishing Reel Parts Flexible Shaft Foam Food Processor Parts Framing Fuel Gadgets Games Amusement Games General Gas Springs Gear Blanks Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Right Angle Gearboxes Tee Gearheads Inline Gearmotors Basic

Master Card Accepted
Mastercard
Secure Checkout


Gearmotors DC Gearmotors DC Perm... Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Imperial Worms Gears Metric Bevel Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hobby Accessories Hobby Gears Hobby Motors Hobby Servo Motors Hobby Shafting Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings to Suit B... Housings with Inte... Hubs ISOPADS Insulators Isolators

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Jigsaws Jockey Wheel Thrus... Keys Keys and Keysteel Kites Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe Knobs Lock Knobs Mushroom Knobs Oval Knobs Pointer Knobs Precision Knobs Push Pull Knobs Round Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Lazy Susans Leads and Connectors Leadscrew Actuators Leadscrews Levers Lifting Chain Lights Linear Slides Locking Assemblies Locking Bushings Locking Compounds Lubricants General... MRI Table Bearings Magnets Alcomax Magnets Alnico

Amex Accepted
Amex
Secure Checkout


Magnets Bar Magnets Ceramic Magnets Cup Magnets Rare Earth Marking Measuring Equipment Measuring Gauges Medical Model Car Kits Model Jet Turbine ... Model Personnel Model Planes and H... Modelling Accessories Modelling Paints Motors DC Motors Stepper Motors Vibrating Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Leveling Mounts Machinery Mounts Plate Mounts Rectangular Mounts Wedge Nuts Nuts Lock ORings ORings for Dental ... Oil Seals Oils Specialised Packing Boxes and ... Parts Boxes Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Pins Clevis Pins Cotter Pins Dowel Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Pins Locating Plastic Plugs Plungers Ball Plungers Indexing Plungers Spring Plywood Positioning Power Adaptors Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Grooved Pulleys Idler Pulleys Synchromesh Pulleys Vee Punches Pushbike Bearings RC Boats and Acces... RC Engine Parts RC Filters RC Nitro Accessories RC Nitro Engine Ac... RC Propellers and ... Radio Equipment Ratchets and Pawls Robotic Bases Robotic Servo Motors Robotic Wheels Rod Ends Rollers

Visa Card Accepted
Visa
Secure Checkout


Screws Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach Screws Countersunk Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sets Shaft Extenders an... Shafting Aluminium Shafting General P... Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Soldering Spacers Spare Parts Special Effects Li... Speed Controllers Spinners Splined Shafts and...

Master Card Accepted
Mastercard
Secure Checkout


Sporting Spray Paint Spring Anchors Spring Assemblies Spring Motors Spring Mounts Spring Washers Spring Wire Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General Springs Torsion Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stationery Stays Steam Engine Parts Stops Spring Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Suspension Units Swimming Pool Bear... Switches Tape Tee Joints Tension Bushings Tensioners Thread Thread Inserts Threaded Rod Throwing Planes

Pay By
Phone after Checkout
07 3275 2097
International +61 7 3275 2097


Timing Belt Lengths Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Rings Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Cutting Tools Deburring Tools General Purpose Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Tube and Tubing Turntables Universal Joint Co... Universal Joints VRings Vacuum Cleaner Belts Vee Belts Washers Aligning Washers Finishing Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic

Amex Accepted
Amex
Secure Checkout


Washers Flat Rubber Washers General Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wheels RC Plane Wheels and Tyres R... Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 119812 products in 3057 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.