Housings Bearing Tapped Base Unit Stainless Categories

Shafting - Pre Drilled and Tapped - High Carbon Steel

Search Rating: 43%

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.

Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 43%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Search Rating: 39%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 ^oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Search Rating: 39%

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 ^oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Search Rating: 39%

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 ^oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food Grade.

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Search Rating: 39%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 ^oC.

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Search Rating: 39%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 ^oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Search Rating: 39%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 ^oC.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Search Rating: 39%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 ^oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Search Rating: 39%

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 ^oC.

Housings - Bearing - Flanged - 2 Bolt Hole - Aluminium

Search Rating: 38%

Starting at 8mm bore size, aluminium silver series housings with removable chrome steel bearing

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Search Rating: 38%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Search Rating: 38%

Load and speed capability depend on the bearing used. Use with steel or plastic bearing inserts for plastic housings.

Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Search Rating: 38%

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic

Search Rating: 38%

Load and speed capability depend on the bearing used. Use with steel bearing inserts for plastic housings.

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Search Rating: 38%

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - Offset - Cast Iron

Search Rating: 38%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Housings - Bearing - Flanged - Round - Cast Iron

Search Rating: 38%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Housings - Bearing - Flanged - Square - Cast Iron

Search Rating: 38%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Housings - Bearing - Pillow Block - Cast Iron

Search Rating: 38%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Housings - Bearing - Pillow Block - Plastic

Search Rating: 38%

Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Housings - Bearing - Pillow Block - Pressed Metal

Search Rating: 38%

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Pillow Block - Miniature

Search Rating: 38%

Spyraflo aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Housings - Bearing - Square - Miniature

Search Rating: 38%

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Housings - Bearing - Flanged - 2 Bolt Hole - W300

Search Rating: 38%

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.

Housings - Bearing - Flanged - Miniature - Self Aligning

Search Rating: 38%

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5^o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.

Housings - Bearing - Flanged - Square - W300

Search Rating: 38%

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 ^oC to +180 ^oC.

Housings - Bearing - Pedestal - Miniature - Self Aligning

Search Rating: 38%

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5^o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.

Housings - Bearing - Pillow Block - Die Cast

Search Rating: 38%

Also see combined categories:
All Housings with Integral Bearing

Zinc Die Cast Housings with or without Sintered Bronze Bearings.

Lubricable. With or without standard sintered bronze bearings.

Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing

Search Rating: 38%

Also see combined categories:
All Housings with Integral Bearing

Flanged Ertalyte Bearing in Moulded Nylon 101 Housing.

Self-Lubricating. High Performance. Electrically Insulating.

Housings - Bearing - Pillow Block - Thermoplastic - W300

Search Rating: 38%

Also see combined categories:
All Housings with Integral Bearing

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 ^oC to +130 ^oC. Max. Static Tensile Strength is Long Term. Info for Short Term also available.

Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Search Rating: 38%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Search Rating: 38%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Search Rating: 38%

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Search Rating: 38%

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Search Rating: 38%

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Flanged - Washdown

Search Rating: 38%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo electroless nickel plated aluminum housing with self aligning Stainless Steel covered Acetal bearing.

See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.

Bearings - For Cast Iron Housings

Search Rating: 38%

Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2^o, but can accommodate up to 6^o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.

Bearings - For Pressed Metal Housings

Search Rating: 38%

Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2^o, but can accommodate up to 6^o. Also available with eccentric locking collars on request.

Housings - Pillow Block - Washdown

Search Rating: 38%

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.

Bearings - Acetal - Solid - For Plastic Housings

Search Rating: 37%

Insert bearings ideal for wet conditions. Similar to wide inner ring bearings for P, F, Fl type housings but solid plastic.

Load and speed calculations are for reference only. Testing is recommended.

Housings - Flanged - Self Aligning - Needle Roller

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Housings - Flange Mount - Non Aligning - Bronze

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile flange mounted PTFE bronze bearings

See links at bottom of web page for more information.

Housings - Flange Mount - Self Aligning - Delrin

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted acetal Delrin bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Bearings - Self Clinching - Miniature - Self Aligning

Search Rating: 37%

Also see combined categories:
All Housings with Integral Bearing

Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 ^oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.

Housings - Igubal - Sliding

Search Rating: 37%

Also see combined categories:
All Housings with Integral Bearing

Housing: Aluminium. Insert: Sliding film Iglidur^(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.

Housings - Linear - Square

Search Rating: 37%

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Bearings - Acetal with Glass Balls - For Plastic Housings

Search Rating: 37%

Also see combined categories:
All Acetal Bearings for Housings

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Bearings - Acetal with Stainless Balls - For Plastic Housings

Search Rating: 37%

Also see combined categories:
All Acetal Bearings for Housings

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Housings - Flanged - Self Aligning - Bronze - Heavy Duty

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning bronze bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Housings - Flange Mount - Non Aligning - Needle Roller

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile flange mounted needle roller bearings

See links at bottom of web page for more information.

Housings - Flange Mount - Self Aligning - Delrin AF

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted acetal Delrin AF bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Flange Mount - Self Aligning - Needle Roller

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted needle roller bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Flange Mount - Self Aligning - Sintered Bronze

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted sintered bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Pillow Block - Self Aligning - Needle Roller

Search Rating: 37%

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with self aligning needle roller bearings.

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Housings - Pillow Block - Self Aligning - Sintered Bronze

Search Rating: 37%

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with porous sintered bronze

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Housings - Linear - Square - Clamps

Search Rating: 37%

Also see combined categories:
All Linear Bearing Housings

Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings

Search Rating: 37%

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Housings - Flanged - Self Aligning - Heavy Duty - Delrin -tm-

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Pillow Block - Self Aligning - PTFE Bronze - Standard

Search Rating: 37%

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with standard PTFE bronze

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Housings - Linear - Thomson Super Flanged

Search Rating: 37%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Housings - Flanged - Self Aligning - Heavy Duty - Delrin AF -tm-

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo low profile self aligning flange mounted acetal Delrin AF bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted high temperature PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp

Search Rating: 37%

Also see combined categories:
All Spyraflo Flange Mounted Bearings
All Spyraflo Mounted Bearings

Low profile self aligning flange mounted low temperature PTFE bronze bearings

See links at bottom of web page for more information. +/- 5% Static Alignment.

Housings - Pillow Block - Self Aligning - Low Temp - PTFE Bronze

Search Rating: 37%

Also see combined categories:
All Spyraflo Pillow Block Mounted Bearings
All Spyraflo Mounted Bearings

Spyraflo robust light weight aluminium housing with low temperature PTFE bronze

See links at bottom of web page for more information. +/- 5% Static Alignment. Sintered aluminium housing. Corrosion Resistant. Light weight.

Housings - Linear - Thomson Super Smart Flanged

Search Rating: 37%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Housings - Linear - Pillow Block - Closed - Ceramic Coated

Search Rating: 37%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.

Housings - Linear - Thomson Super Smart Pillow Block - Closed

Search Rating: 37%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed

Search Rating: 36%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed

Search Rating: 36%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.

Bearings - Self Clinching - Self Aligning - Delrin -tm-

Search Rating: 36%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Bearings - Self Clinching - Self Aligning - Needle Roller

Search Rating: 36%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Bearings - Self Clinching - Non Aligning - PTFE Bronze

Search Rating: 36%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo ptfe bronze roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Bearings - Self Clinching - Self Aligning - Sintered Bronze

Search Rating: 36%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearing in a special self-clinching steel housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Bearings - Self Clinching - Self Aligning - Stainless and Delrin -tm-

Search Rating: 35%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Bearings - Self Clinching - Self Aligning - Sintered Bronze and Stainless

Search Rating: 35%

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearings in a special stainless steel self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Bushings - Spherical - Plastic

Search Rating: 34%

Also see combined categories:
All Spherical Bushings

Plastic spherical plain bearings. Also known as ball bushings.

Ball Material W300. Housing Iglidur G. Maintenance Free. Self lubricating. Compensates for axial loads and misalignment. Corrosion resistant. High vibration dampening capacity.

Bearings - Linear - Ball - Closed

Search Rating: 34%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 ^oC Intermittent, 80 Deg C continuous.

Rings - Retaining - PR Type Internal - For Linear Bearings

Search Rating: 33%

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.

Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 32%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 ^oC Intermittent, 80 Deg C continuous.

Rings - Hoist - With Ball Bearings

Search Rating: 31%

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360^o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

Circlips - Internal - Inverted

Search Rating: 29%

Also see combined categories:
All Internal Circlips

M1308 / JV / INTV / BN830. Retaining rings. Snap Rings (USA).

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers.