Handles Categories


Category Matches

Handles

TopHide Pictures

Handles - Adjustable - Stud
Handles - Adjustable - Stud

Search Rating: 100%

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Handles - Adjustable - Tapped and Reamed
Handles - Adjustable - Tapped and Reamed

Search Rating: 100%

Adjustable Handles

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with either a Tapped or Reamed Hole. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the insert remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Latches Handle

TopHide Pictures

Handles - Latching - 2-Point Locking Rod Kit
Handles - Latching - 2-Point Locking Rod Kit

Search Rating: 65%

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Handles - Latching - Cab Locks
Handles - Latching - Cab Locks

Search Rating: 65%

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.


Handles - Latching - L-Handle - Locking
Handles - Latching - L-Handle - Locking

Search Rating: 65%

Chrome finished zinc die-cast construction. 360o handle rotation. Comes with gasket. All locks are keyed alike. Keys included. May be used with rod kit for 2 point locking.

Related Information:

Handles - Latching - Padlocking
Handles - Latching - Padlocking

Search Rating: 65%

Zinc finished iron/steel construction. Has 5/16in. Square shank.


Handles - Latching - T-Handle - Folding
Handles - Latching - T-Handle - Folding

Search Rating: 65%

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.


Handles - Latching - T-Handle - Locking
Handles - Latching - T-Handle - Locking

Search Rating: 65%

Also see combined categories:
All T Handles

90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.

Related Information:

Knobs Lock

TopHide Pictures

Handles - Lock - Round
Handles - Lock - Round

Search Rating: 59%

Also see combined categories:
All Lock Handles
All Handles

Satin Chrome with black plastic grip. Supplied with 2 keys.


Latches Other

TopHide Pictures

Handles - Tee
Handles - Tee

Search Rating: 59%

Zinc plated steel 7.94mm (5/16in.) square shank.


Latching Handles - Outside Door - Heavy Duty
Latching Handles - Outside Door - Heavy Duty

Search Rating: 58%

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.


Latches - Knob Handle
Latches - Knob Handle

Search Rating: 58%

Black powder coated die cast zinc. Maximum working load 66kg. Average ultimate load 150kg.


Latches Wing

TopHide Pictures

Latches - Wing Handle - Locking - Black Polyamide
Latches - Wing Handle - Locking - Black Polyamide

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Wing Handle - Locking - Black Powder Coat
Latches - Wing Handle - Locking - Black Powder Coat

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Wing Handle - Locking - Chrome
Latches - Wing Handle - Locking - Chrome

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Wing Handle - Non Locking - Black Polyamide
Latches - Wing Handle - Non Locking - Black Polyamide

Search Rating: 58%

Also see combined categories:
All Wing Handle Latches

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Pins Clevis

TopHide Pictures

Pins - Clevis - Handle - Bent
Pins - Clevis - Handle - Bent

Search Rating: 58%

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle.


Pins - Clevis - Handle - Straight - Plain
Pins - Clevis - Handle - Straight - Plain

Search Rating: 58%

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.


Pins - Clevis - Handle - Straight - Powder Coated
Pins - Clevis - Handle - Straight - Powder Coated

Search Rating: 58%

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.


Cross Blocks

TopHide Pictures

Joints - Swivel - Tee Handle - Steel
Joints - Swivel - Tee Handle - Steel

Search Rating: 58%

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Large Handle
Plungers - Indexing - Large Handle

Search Rating: 58%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish.


Plungers Spring

TopHide Pictures

Plungers - Spring - Acetal Handle - Locking - Stainless
Plungers - Spring - Acetal Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Acetal Handle - Locking - Steel
Plungers - Spring - Acetal Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Acetal Handle - Non Locking - Stainless
Plungers - Spring - Acetal Handle - Non Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Acetal Handle - Non Locking - Steel
Plungers - Spring - Acetal Handle - Non Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Locking - Stainless
Plungers - Spring - Knurled Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal
Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic
Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Locking - Steel
Plungers - Spring - Knurled Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Locking - Steel-Acetal
Plungers - Spring - Knurled Handle - Locking - Steel-Acetal

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Locking - Steel-Phenolic
Plungers - Spring - Knurled Handle - Locking - Steel-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Non Locking - Stainless
Plungers - Spring - Knurled Handle - Non Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Knurled Handle - Non Locking - Steel
Plungers - Spring - Knurled Handle - Non Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Locking - Stainless
Plungers - Spring - Ring Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Locking - Stainless-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Locking - Steel
Plungers - Spring - Ring Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Locking - Steel-Phenolic
Plungers - Spring - Ring Handle - Locking - Steel-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Stainless
Plungers - Spring - Ring Handle - Non Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Steel
Plungers - Spring - Ring Handle - Non Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Steel-Phenolic

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Tee Handle - Locking - Stainless
Plungers - Spring - Tee Handle - Locking - Stainless

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Tee Handle - Locking - Steel
Plungers - Spring - Tee Handle - Locking - Steel

Search Rating: 58%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Pins Pull

TopHide Pictures

Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Search Rating: 58%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Plungers Spring

TopHide Pictures

Plungers - Spring - Hex Drive Handle - Locking - Steel
Plungers - Spring - Hex Drive Handle - Locking - Steel

Search Rating: 57%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Ball Handle - Plastic Handle
Pins - Ball Lock - Ball Handle - Plastic Handle

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Also called detent pins.


Pins - Ball Lock - Button Handle - Commercial
Pins - Ball Lock - Button Handle - Commercial

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Also called detent pins.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.


Pins - Ball Lock - Button Handle - Stainless Steel
Pins - Ball Lock - Button Handle - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Pins - Ball Lock - Button Handle - Steel
Pins - Ball Lock - Button Handle - Steel

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium. Also called detent pins.


Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel
Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Pins - Ball Lock - Ring Handle - Industrial - Steel
Pins - Ball Lock - Ring Handle - Industrial - Steel

Search Rating: 57%

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Latches Compression

TopHide Pictures

Latches - Compression - Wing
Latches - Compression - Wing

Search Rating: 57%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches Quarter Turn

TopHide Pictures

Latches - 1-4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking
Latches - 1-4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking
Latches - 1-4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn -Tee Handle - Locking
Latches - 1-4 Turn -Tee Handle - Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn -Tee Handle with Pawl - Black Finish
Latches - 1-4 Turn -Tee Handle with Pawl - Black Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn -Tee Handle with Pawl - Chrome Finish
Latches - 1-4 Turn -Tee Handle with Pawl - Chrome Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn - Wing Handle with Pawl - Black Finish
Latches - 1-4 Turn  - Wing Handle with Pawl - Black Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Padlockable only on items so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Latches - 1-4 Turn - Wing Handle with Pawl - Chrome Finish
Latches - 1-4 Turn  - Wing Handle with Pawl - Chrome Finish

Search Rating: 57%

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Levers

TopHide Pictures

Levers - Clamp - Quick Release
Levers - Clamp - Quick Release

Search Rating: 57%

Also see combined categories:
All Levers

Handles: Die-cast zinc or plastic. Internal thread: mechanism made from carbon steel. The thru-hole clamping lever allows for quick clamping on long thread lengths.


Latches Compression

TopHide Pictures

Latches - Compression - L-Handle
Latches - Compression - L-Handle

Search Rating: 56%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Compression - Lift and Turn - Hooked Handle
Latches - Compression - Lift and Turn - Hooked Handle

Search Rating: 56%

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Maximum panel thickness 5.95mm. Positioning pin assures proper latching.


Latches - Compression - Lift and Turn - Straight Handle
Latches - Compression - Lift and Turn - Straight Handle

Search Rating: 56%

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Comes with mounting hardware. Max working load 44kg. M5 mounting screws supplied. For panels thicker than 6.35mm a longer screw and lockwasher combination will be required.


Latches - Compression - T-Handle
Latches - Compression - T-Handle

Search Rating: 56%

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Related Information:

Latches - Compression - Vibration Proof
Latches - Compression - Vibration Proof

Search Rating: 56%

Handles and housings are black powder coated zinc alloy.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.


Pins - Ball Lock - Shoulder Type - Ring Handle
Pins - Ball Lock - Shoulder Type - Ring Handle

Search Rating: 56%

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Also called detent pins.


Pins - Ball Lock - T-Handle - Plastic Handle
Pins - Ball Lock - T-Handle - Plastic Handle

Search Rating: 56%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Tee handle. Also called detent pins.


Tools Threading

TopHide Pictures

Tools - Tap Wrenches
Tools - Tap Wrenches

Search Rating: 56%

Also see combined categories:
All Tools

Tee handle and bar types. Suit taps from 1mm to 12mm.


Games Amusement

TopHide Pictures

Music Boxes - Mechanical
Music Boxes - Mechanical

Search Rating: 56%

Also see combined categories:
All Games and Gadgets

Wind the handle and hear the music.

Many tunes to choose from including Happy Birthday, Fur Elise, Hey Jude, Imagine, La Vie En Rose, Pink Panther, Greensleeves, Old MacDonald, Twinkle Twinkle Little Star, Over the Rainbow, The Lion Sleeps Tonight, You are my Sunshine,. When you Wish Upon a Star, Waltzing Matilda.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Music Boxes - Mechanical.

Levers

TopHide Pictures

Levers - Clamp
Levers - Clamp

Search Rating: 56%

Also see combined categories:
All Levers

Steel Parts: Quality class 5.8. Handle: Diecast zinc to DIN 1743 or Glass fibre reinforced plastic with toothed wheel in diecast zinc. Surface Finish: Handle plastic coated. Steel parts black oxide finish.


Knobs Ball

TopHide Pictures

Knobs - Ball - Threaded - Lateral Grooved
Knobs - Ball - Threaded - Lateral Grooved

Search Rating: 54%

Also see combined categories:
All Female Threaded Ball Knobs

Moulded platic control ball handles for machine tools, jigs, fixtures etc.

Stylish grooves to assist with grip. Brass threaded insert.


Latches Other

TopHide Pictures

Latches - Cup - Flush
Latches - Cup - Flush

Search Rating: 54%

Polished stainless steel cup and bracket. Handle is diecast zinc, chrome plated. Set grip during installation. Includes mounting studs, mounting nuts and lockwashers. Grip range 27.7 to 39.6mm.

Max working load 44kg. Ultimate load 110kg. Turns clockwise to latch.


Plungers Spring

TopHide Pictures

Plungers - Spring - Threaded Adapter - Locking - Stainless
Plungers - Spring - Threaded Adapter - Locking - Stainless

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded Adapter - Locking - Steel
Plungers - Spring - Threaded Adapter - Locking - Steel

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded Adapter - Non Locking - Stainless
Plungers - Spring - Threaded Adapter - Non Locking - Stainless

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Threaded Adapter - Non Locking - Steel
Plungers - Spring - Threaded Adapter - Non Locking - Steel

Search Rating: 54%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Latches Other

TopHide Pictures

Latches - Tension - Versa Latch - Steel
Latches - Tension - Versa Latch - Steel

Search Rating: 52%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Zinc plated carbon steel with bright chromate dip.

Keepers sold separately - see linked category.


Latches Draw

TopHide Pictures

Latches - Draw - Flexible - T-Handle - Non Conductive
Latches - Draw - Flexible - T-Handle - Non Conductive

Search Rating: 51%

No metal parts. UV resistant, self aligning. Inbuilt drag prevents handle flopping. Steady state clamp force 4.4kg. Mounts with M5 screws or 4.76mm (3/16 in.) rivets. Keeper included.

Thermoplastic elastomer.


Latches Other

TopHide Pictures

Latches - Tension - Versa Latch - 300 Grade Stainless Steel
Latches - Tension - Versa Latch - 300 Grade Stainless Steel

Search Rating: 51%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Passivated type 300 grade stainless steel.

Keepers sold separately - see linked category.


Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - L-Handle - Industrial - Steel
Pins - Ball Lock - L-Handle - Industrial - Steel

Search Rating: 51%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Also called detent pins.


Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Search Rating: 51%

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.


Tools General

TopHide Pictures

Tools - General
Tools - General

Search Rating: 50%

Also see combined categories:
All Tools

Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits

X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Tools - General.

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Search Rating: 50%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.


Tools Threading

TopHide Pictures

Tools - Thread Repair
Tools - Thread Repair

Search Rating: 50%

Also see combined categories:
All Tools

Quickly repairs damaged screws

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.


Latches Other

TopHide Pictures

Latches - Swell
Latches - Swell

Search Rating: 49%

Latches in any frame thickness, blind application, glass or plastic. Latches accommodate misalignment between door and frame.

Black nylon handle and nut. Black rubber bushing provides sound deadening effect. When handle is lifted bushing diameter decreases allowing it to pass through the hole in the frame to unlatch the door.


Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - L-Handle - Industrial - Stainless Steel
Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Search Rating: 49%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Also called detent pins.


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Search Rating: 48%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle. Also called detent pins.


Pins - Ball Lock - Shoulder Type - T Handle
Pins - Ball Lock - Shoulder Type - T Handle

Search Rating: 48%

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Tee handle. Also called detent pins.


Latches Paddle

TopHide Pictures

Latches - Paddle
Latches - Paddle

Search Rating: 48%

Push to close latch accommodates left or right side latching. Corrosion resistant polycarbonate / ABS black resin housing and paddle. Paddle serves as door handle.

Quick easly installation into 36.8mm x 84.6mm rectangular hole. Lock plug is glass reinforced acetal with brass wafers. Other parts are glass reinforced nylon. Key lockable with locked/unlocked indicator. Keys are brass. Two 4.2x1.4mm self tapping screws supplied. Total grip left or right is 6.35mm. Max working load 50kg.


Kites

TopHide Pictures

Kites - Spare Parts
Kites - Spare Parts

Search Rating: 48%

Also see combined categories:
All Kites

Accessories for all your kite needs. Replacement Rods and Tubes can be found under Carbon Fibre. Rod and tube connectors are under Connectors

Handles, lines, tails and winders.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Kites - Spare Parts.

Tools Threading

TopHide Pictures

Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Search Rating: 48%

Also see combined categories:
All Tools

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Related Information:

Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Search Rating: 47%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle. Also called detent pins.


Sets

TopHide Pictures

Tools - Sets - Foldup
Tools - Sets - Foldup

Search Rating: 46%

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124406 products in 3083 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.