Gears Spur 24dp Hub Mounting Aluminium Categories


Category Matches

Gears Inch Spur

TopHide Pictures

Gears - Spur - 120DP - Hub Mounting - Aluminium
Gears - Spur - 120DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - Hub Mounting - Aluminium
Gears - Spur -  24DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - Hub Mounting - Aluminium
Gears - Spur -  32DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - Hub Mounting - Aluminium
Gears - Spur -  48DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Hub Mounting - Aluminium
Gears - Spur -  64DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Hub Mounting - Aluminium
Gears - Spur -  72DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 80DP - Hub Mounting - Aluminium
Gears - Spur -  80DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 96DP - Hub Mounting - Aluminium
Gears - Spur -  96DP - Hub Mounting - Aluminium

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - Hub Mounting - Plastic with Aluminium Core - No Hub
Gears - Spur -  24DP - Hub Mounting - Plastic with Aluminium Core - No Hub

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  32DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal with aluminium core. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  48DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  64DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Hub Mounting - Plastic with Aluminium Core
Gears - Spur -  72DP - Hub Mounting - Plastic with Aluminium Core

Search Rating: 74%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gear Racks Flexible

TopHide Pictures

Gear Racks - Flexible - Guide Rails
Gear Racks - Flexible - Guide Rails

Search Rating: 53%

Also see combined categories:
All Flexible Gear Racks

For mounting flexirack. Flexible nylon or rigid aluminium guide rails.

Longer lengths in Nylon available on special order. For easy ready selected sets of rack and gear please see the HES website.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Machine - Cushioned
Mounts - Leveling - Machine - Cushioned

Search Rating: 51%

Also see combined categories:
All Mounting Feet

Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.


Gears Inch Spur

TopHide Pictures

Gears - Spur - 120DP - Hub Mounting - Stainless
Gears - Spur - 120DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - Hub Mounting - Stainless
Gears - Spur -  24DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - Hub Mounting - Stainless
Gears - Spur -  32DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - Hub Mounting - Stainless
Gears - Spur -  48DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Hub Mounting - Stainless
Gears - Spur -  64DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Hub Mounting - Stainless
Gears - Spur -  72DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 80DP - Hub Mounting - Stainless
Gears - Spur -  80DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 96DP - Hub Mounting - Stainless
Gears - Spur -  96DP - Hub Mounting - Stainless

Search Rating: 51%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Search Rating: 50%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Search Rating: 50%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Aluminium
Gears - Spur - Module 1 - Aluminium

Search Rating: 50%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 2024 aluminium.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears Inch Spur

TopHide Pictures

Gears - Spur - 120DP - Aluminium
Gears - Spur - 120DP - Aluminium

Search Rating: 50%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 80DP - Aluminium
Gears - Spur -  80DP - Aluminium

Search Rating: 50%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.318mm (1/80 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 80 Diametrical Pitch. Approx 1mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 96DP - Aluminium
Gears - Spur -  96DP - Aluminium

Search Rating: 50%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.265mm (1/96 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Aluminium
Gears - Spur -  64DP - Aluminium

Search Rating: 50%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Aluminium
Gears - Spur -  72DP - Aluminium

Search Rating: 50%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 20 Degree - Aluminium
Gears - Spur -  32DP - 20 Degree - Aluminium

Search Rating: 49%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 20 Degree - Aluminium
Gears - Spur -  48DP - 20 Degree - Aluminium

Search Rating: 49%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 20 Degree - Aluminium
Gears - Spur -  24DP - 20 Degree - Aluminium

Search Rating: 49%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - Differential End - Aluminium
Gears - Spur -  48DP - Differential End - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 64DP - Differential End - Aluminium
Gears - Spur -  64DP - Differential End - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Differential End - Aluminium
Gears - Spur -  72DP - Differential End - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 96DP - Differential End - Aluminium
Gears - Spur -  96DP - Differential End - Aluminium

Search Rating: 45%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 96 Diametrical Pitch. Approx 0.83mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears Cluster

TopHide Pictures

Gears - Cluster - 48 Diametrical Pitch
Gears - Cluster - 48 Diametrical Pitch

Search Rating: 45%

Also see combined categories:
All Cluster Gears

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.


Gears - Cluster - 64 Diametrical Pitch - Stainless
Gears - Cluster - 64 Diametrical Pitch - Stainless

Search Rating: 44%

Also see combined categories:
All Cluster Gears

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.


Gears - Cluster - 72 Diametrical Pitch - Stainless
Gears - Cluster - 72 Diametrical Pitch - Stainless

Search Rating: 44%

Also see combined categories:
All Cluster Gears

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.


Gears - Cluster - 80 Diametrical Pitch - Stainless
Gears - Cluster - 80 Diametrical Pitch - Stainless

Search Rating: 44%

Also see combined categories:
All Cluster Gears

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.


Rollers

TopHide Pictures

Rollers - Urethane Feed - With Hub
Rollers - Urethane Feed - With Hub

Search Rating: 44%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Urethane coated aluminium alloy feed rollers with hub.

Roller - Urethane 60 Durometer, Ground Outside Diameter. Sleeve - Aluminium.

Related Information:

Couplings Disk

TopHide Pictures

Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium

Search Rating: 44%

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:

Gearheads Inline

TopHide Pictures

Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Search Rating: 42%

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

Shafting Precision Ground

TopHide Pictures

Rail Supports - Without Shaft
Rail Supports - Without Shaft

Search Rating: 42%

Also see combined categories:
All Shaft Supports

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Related Information:

Magnets Ceramic

TopHide Pictures

Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Search Rating: 42%

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Enclosures

TopHide Pictures

Enclosures - Aluminium - 100 Series
Enclosures - Aluminium - 100 Series

Search Rating: 42%

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical or electrical projects.

Internal guide slots for mounting PCB assemblies vertically. Ideal for housing sensitive electrical, mechanical, pneumatic or hydraulic devices. Provides effective shielding of EMI and RFI. Designed to IP65 of IEC529 and NEMA 4 (dust and hoseproof). The lid incorporates a recessed neoprene gasket.


Couplings Sleeve

TopHide Pictures

Couplings - Sleeve Type - Hubs
Couplings - Sleeve Type - Hubs

Search Rating: 41%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Couplings - Sleeve Type - Sleeves
Couplings - Sleeve Type - Sleeves

Search Rating: 40%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

Gears Inch Mitre

TopHide Pictures

Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 48 Diametrical Pitch - Precision Matched Sets

Search Rating: 40%

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 64 Diametrical Pitch - Precision Matched Sets

Search Rating: 40%

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets
Gears - Mitre - 72 Diametrical Pitch - Precision Matched Sets

Search Rating: 40%

Also see combined categories:
All Imperial Mitre Gear Sets

Sold as sets - 1:1 Ratio. Stainless steel and aluminium.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. Mitre gear sets provide a 1:1 ratio on a 90o angle. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Thread Inserts

TopHide Pictures

Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Search Rating: 40%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:

Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Search Rating: 40%

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:

Pulleys Timing AT5 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Search Rating: 39%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Search Rating: 39%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - AT5 - 25mm Wide - Through Bore

Search Rating: 39%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing pulleys to suit AT5 Series belts

Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.

Related Information:

Gears Inch Bevel

TopHide Pictures

Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 48 Diametrical Pitch - Precision Matched Sets

Search Rating: 38%

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 64 Diametrical Pitch - Precision Matched Sets

Search Rating: 38%

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets
Gears - Bevel - 72 Diametrical Pitch - Precision Matched Sets

Search Rating: 38%

Also see combined categories:
All Imperial Bevel Gear Sets

Sold as sets. For 90o angle power transfer. Ratios exceeding 1 to 1.

Stainless : 303 Stainless Steel. Aluminium : 2024-T4 or T351 Aluminium Alloy Anodised before cutting. AGMA Q10 Quality. 20o Pressure Angle. See Gears - Mitre for 1:1 ratios.

Related Information:

Pulleys Timing GT2 2mm

TopHide Pictures

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock

Search Rating: 38%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.

Related Information:

Pulleys Timing GT2 3mm

TopHide Pictures

Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - EZ-Lock

Search Rating: 38%

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.

Related Information:

Pulleys Timing GT2 2mm

TopHide Pictures

Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  2.000mm Pitch - GT2 - 6mm Wide - Through Bore

Search Rating: 38%

Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.

Aluminium Alloy. Set Screw and EZI-LOK Hubs.

Related Information:

Rod Ends Aluminium

TopHide Pictures

Rod Ends - Aluminium - Female - Hobby
Rod Ends - Aluminium - Female - Hobby

Search Rating: 37%

Aluminum Alloy Rod ends for RC Cars

Extended eye. Very loose eye.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod Ends - Aluminium - Female - Hobby.

Gearboxes Cross Axis

TopHide Pictures

Gearboxes - Cross Axis - 104 x 63 x 63
Gearboxes - Cross Axis - 104 x  63 x  63

Search Rating: 37%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 15mm Bores. E40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Gearboxes - Cross Axis - 130 x 80 x 80
Gearboxes - Cross Axis - 130 x  80 x  80

Search Rating: 37%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 20mm Bores. E50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Gearboxes - Cross Axis - 150 x 96 x 96 A
Gearboxes - Cross Axis - 150 x  96 x  96 A

Search Rating: 37%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Gearboxes - Cross Axis - 52 x 34 x 34
Gearboxes - Cross Axis -  52 x  34 x  34

Search Rating: 37%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 6mm Bores. E20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel: Aluminium Bronze (CA104 / AB2). Circlips: Steel (not plated). Bearing: Steel 2RS (Rubber seals fitted).

Related Information:

Gearboxes - Cross Axis - 78 x 48 x 48
Gearboxes - Cross Axis -  78 x  48 x  48

Search Rating: 37%

Also see combined categories:
All Cross Axis Gearboxes

Helical or Wormwheel Gears. 10mm Bores. E30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Related Information:

Pulleys Timing T5 5mm

TopHide Pictures

Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 10mm Wide - Through Bore

Search Rating: 36%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 16mm Wide - Through Bore

Search Rating: 36%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - T5 - 25mm Wide - Through Bore

Search Rating: 36%

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 25.0mm to 25.4mm wide.

Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.

Related Information:

Snaps

TopHide Pictures

Snaps - Swivel Eye - Aluminium
Snaps - Swivel Eye - Aluminium

Search Rating: 36%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Linear Slides

TopHide Pictures

Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium
Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium

Search Rating: 35%

Use with Utilitrak PW Crowned Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.

Related Information:

Gears Inch Internal

TopHide Pictures

Gears - Internal - 24 Diametrical Pitch - Aluminium
Gears - Internal - 24 Diametrical Pitch - Aluminium

Search Rating: 35%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 32 Diametrical Pitch - Aluminium
Gears - Internal - 32 Diametrical Pitch - Aluminium

Search Rating: 35%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 48 Diametrical Pitch - Aluminium
Gears - Internal - 48 Diametrical Pitch - Aluminium

Search Rating: 35%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 64 Diametrical Pitch - Aluminium
Gears - Internal - 64 Diametrical Pitch - Aluminium

Search Rating: 35%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 72 Diametrical Pitch - Aluminium
Gears - Internal - 72 Diametrical Pitch - Aluminium

Search Rating: 35%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Gears - Internal - 96 Diametrical Pitch - Aluminium
Gears - Internal - 96 Diametrical Pitch - Aluminium

Search Rating: 35%

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum


Pins Ball Lock

TopHide Pictures

Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Search Rating: 35%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.


Linear Slides

TopHide Pictures

Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium
Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium

Search Rating: 35%

Use with Utilitrak PW Dual Vee Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.

Related Information:

Gears Inch Racks

TopHide Pictures

Gear Racks - 120DP - Aluminium - Side Holes
Gear Racks -  120DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

120 DP. Approx 0.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 24DP - Aluminium - Side Holes
Gear Racks -  24DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 32DP - Aluminium - Side Holes
Gear Racks -  32DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

32 DP. Approx 2.49mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 48DP - Aluminium - Side Holes
Gear Racks -  48DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

48 DP. Approx 1.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 64DP - Aluminium - Side Holes
Gear Racks -  64DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

64 DP. Approx 1.25mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 72DP - Aluminium - Side Holes
Gear Racks -  72DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 80DP - Aluminium - Side Holes
Gear Racks -  80DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

80 DP. Approx 1.00mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 96DP - Aluminium - Side Holes
Gear Racks -  96DP - Aluminium - Side Holes

Search Rating: 35%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gears Inch Helical

TopHide Pictures

Gears - Helical - 48 Pitch - Aluminium
Gears - Helical - 48 Pitch - Aluminium

Search Rating: 35%

Also see combined categories:
All Imperial Helical Gears

2024 Aluminium


Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.6 - Aluminium
Gears - Mitre - Module 0.6 - Aluminium

Search Rating: 35%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 1.5 - Aluminium
Gears - Mitre - Module 1.5 - Aluminium

Search Rating: 35%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 1 - Aluminium
Gears - Mitre - Module 1 - Aluminium

Search Rating: 35%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Snaps

TopHide Pictures

Snaps - Double Pattern
Snaps - Double Pattern

Search Rating: 34%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Snaps - Swivel Trigger
Snaps - Swivel Trigger

Search Rating: 34%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Snaps - Swivel Body Decoy
Snaps - Swivel Body Decoy

Search Rating: 34%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Snaps - Swivel Eye Leash
Snaps - Swivel Eye Leash

Search Rating: 34%

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy


Clamps

TopHide Pictures

Clamps - Gear - Split
Clamps - Gear - Split

Search Rating: 34%

Also see combined categories:
All Gear Clamps

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 126934 products in 3077 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.