Gears Mitre Spiral Module 2.5 Steel Categories

Gears - Mitre - Spiral - Module 2.5 - Steel

Search Rating: 94%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 2.5 Straight Cut Mitre Gears

Module 2.5 Spiral Bevel Gears

Gears - Bevel - Spiral - Module 2.5 - Steel

Search Rating: 91%

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35^o Spiral Angle / 20^o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

Module 2.5 Straight Cut Bevel Gears

Module 2.5 Spiral Mitre Gears

Gears - Mitre - Module 2.5 - Steel

Search Rating: 78%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 2.5 Bevel Gears

Module 2.5 Spiral Mitre Gears

Gears - Bevel - Module 2.5 - Steel

Search Rating: 72%

Also see combined categories:
All Metric Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

20^o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

Module 2.5 Mitre Gears

Gears - Mitre - Spiral - Module 1.25 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears - Mitre - Spiral - Module 1.5 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 1.5 Straight Cut Mitre Gears

Module 1.5 Spiral Bevel Gears

Gears - Mitre - Spiral - Module 1 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 1 Straight Cut Mitre Gears

Module 1 Spiral Bevel Gears

Gears - Mitre - Spiral - Module 2.25 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears - Mitre - Spiral - Module 2 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 2 Straight Cut Mitre Gears

Module 2 Spiral Bevel Gears

Gears - Mitre - Spiral - Module 3.5 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears - Mitre - Spiral - Module 3 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 3 Straight Cut Mitre Gears

Module 3 Spiral Bevel Gears

Gears - Mitre - Spiral - Module 4 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears - Mitre - Spiral - Module 5 - Steel

Search Rating: 70%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20^o Pressure Angle - 35^o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears - Bevel - Spiral - Module 2 - Steel

Search Rating: 67%

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35^o Spiral Angle / 20^o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

Module 2 Straight Cut Bevel Gears

Module 2 Spiral Mitre Gears

Gears - Bevel - Spiral - Module 3 - Steel

Search Rating: 67%

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35^o Spiral Angle / 20^o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Related Information:

Module 3 Straight Cut Bevel Gears

Module 3 Spiral Mitre Gears

Gears - Bevel - Spiral - Module 4 - Steel

Search Rating: 67%

Also see combined categories:
All Metric Bevel Gears
All Metric Spiral Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35^o Spiral Angle / 20^o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Gears - Mitre - Module 2.5 - Plastic

Search Rating: 65%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 2.5 Bevel Gears

Module 2.5 Spiral Mitre Gears

Gears - Mitre - Module 2.5 - Zinc Diecast

Search Rating: 65%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 2.5 Bevel Gears

Module 2.5 Spiral Mitre Gears

Gear Racks - Module 2.5 - Steel

Search Rating: 64%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20^o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.

Gears - Spur - Module 2.5 - Steel

Search Rating: 64%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20^o Pressure Angle. Carbon steel

Metallic and plastic. Fairloc^TM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - Module 2.5 - Stem - Steel

Search Rating: 64%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

For simple ready selected sets of spur gears please see the SPB Website

Gears - Spur - Module 2.5 - Stainless

Search Rating: 62%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20^o Pressure Angle. 303 stainless steel

Metallic and plastic. Fairloc^TM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

For simple ready selected sets of spur gears please see the SPB Website

Gears - Bevel - Module 2.5 - Plastic

Search Rating: 59%

Also see combined categories:
All Metric Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

20^o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

Module 2.5 Mitre Gears

Gears - Mitre - Module 1 - Steel

Search Rating: 54%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 1 Bevel Gears

Module 1 Spiral Mitre Gears

Gears - Mitre - Module 0.6 - Steel

Search Rating: 54%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears - Mitre - Module 1.5 - Steel

Search Rating: 54%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 1.5 Bevel Gears

Module 1.5 Spiral Mitre Gears

Gears - Mitre - Module 2.75 - Steel

Search Rating: 54%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears - Mitre - Module 2 - Steel

Search Rating: 54%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle. Carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 2 Bevel Gears

Module 2 Spiral Mitre Gears

Gears - Mitre - Module 3 - Steel

Search Rating: 54%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle - Carbon steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Module 3 Bevel Gears

Module 3 Spiral Mitre Gears

Gear Racks - Module 2.5 - Plastic

Search Rating: 51%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20^o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.

Gears - Spur - Module 2.5 - Plastic

Search Rating: 51%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20^o Pressure Angle. Nylon

Metallic and plastic. Fairloc^TM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

For simple ready selected sets of spur gears please see the SPB Website

Gears - Bevel - Module 1.5 - Steel

Search Rating: 48%

Also see combined categories:
All Metric Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

20^o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

Module 1.5 Mitre Gears

Gears - Bevel - Module 1 - Steel

Search Rating: 48%

Also see combined categories:
All Metric Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

20^o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

Module 1 Mitre Gears

Gears - Bevel - Module 2 - Steel

Search Rating: 48%

Also see combined categories:
All Metric Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

20^o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

Module 2 Mitre Gears

Gears - Bevel - Module 3 - Steel

Search Rating: 48%

Also see combined categories:
All Metric Bevel Gears

For 90^o angle power transfer. Ratios exceeding 1 to 1.

20^o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

Module 3 Mitre Gears

Gear Racks - Circular Pitch 2.5 - Steel

Search Rating: 48%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20^o Pressure Angle. Steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 2.5CP Gears have a PCD = No. of Teeth x 0.796mm (2.5/Pi.). 2.5CP Racks have a tooth distance of 2.5mm. For easy ready selected sets of rack and gear please see the HES website.

Gears - Mitre - Module 0.5 - Brass

Search Rating: 41%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20^o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90^o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90^o gears please see the HES website.

Related Information:

For simple ready selected sets of 90 degree gears please see the SPB Website

Gears Mitre Spiral Module 2.5 Steel Categories

Gears Metric Spiral Mitre

Gears Metric Spiral Bevel

Gears Metric Mitre

Gears Metric Bevel

Gears Metric Spiral Mitre

Gears Metric Spiral Bevel

Gears Metric Mitre

Gears Metric Racks

Gears Metric Spur

Gears Metric Stem

Gears Metric Spur

Gears Metric Bevel

Gears Metric Mitre

Gears Metric Racks

Gears Metric Spur

Gears Metric Bevel

Gear Racks Circular Pitch

Gears Metric Mitre

Other Store Pages

Main Pages