Small Parts & Bearings - an MBA company

Gearmotors dc permanent magnet categories


Gearmotors Permanent Magnet


Gearmotors - DC PM - Size 70x114
Gearmotors - DC PM - Size 70x114

Also see combined categories:
All DC Permanent Magnet Gearmotors

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.


Gearmotors - DC - Low Voltage
Gearmotors - DC - Low Voltage

Also see combined categories:
All Low Voltage DC Gearmotors

Reversible - Low Voltage - Self Starting.

Reversible. Low Voltage. Self Starting. Housing : Plastic / Shaft : Steel. This category may be available in the new MBA online store at Gearmotors - DC - Low Voltage.


Gearmotors - DC - Size 12
Gearmotors - DC - Size  12

Also see combined categories:
All DC Gearmotors

12mm Gearhead Body Diameter.

This category may be available in the new MBA online store at Gearmotors - DC - Size 12.


Gearmotors - DC - Size 25 Low Cost
Gearmotors - DC - Size  25 Low Cost


25mm Gearhead Body Diameter. 24.4mm Motor Body Diameter. Low cost. Reversible

D Shaped 4x8mm Output Shaft. This category may be available in the new MBA online store at Gearmotors - DC - Size 25 Low Cost.


Clutches - Slip - Magnetic Particle - No Power
Clutches - Slip - Magnetic Particle - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. This category may be available in the new MBA online store at Clutches - Slip - Magnetic Particle - No Power.


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. This category may be available in the new MBA online store at Clutches - Slip - Magnetic Particle - Integral Shaft - No Power.


Gearmotors - Basic - Hobby - 12.1mm Diameter
Gearmotors - Basic - Hobby - 12.1mm Diameter

Also see combined categories:
All Basic Gearmotors

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications. This category may be available in the new MBA online store at Gearmotors - Basic - Hobby - 12.1mm Diameter.


Gearmotors - Open Gear
Gearmotors - Open Gear


Perfect for applications where inspection of the gears is important, educational purposes or for visual effects.

This category may be available in the new MBA online store at Gearmotors - Open Gear.


Inserts - Self Tapping - For Plastics - Steel
Inserts - Self Tapping - For Plastics - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Related Information:


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:


Inserts - Self Tapping - For Plastics - Stainless Steel
Inserts - Self Tapping - For Plastics - Stainless Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Standard made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:


Inserts - Self Tapping - For Wood - Hex Drive
Inserts - Self Tapping - For Wood - Hex Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Hex Drive.


Inserts - Self Tapping - For Wood - Slotted Drive
Inserts - Self Tapping - For Wood - Slotted Drive

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Related Information:


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can vary on batches. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:


Inserts - Self Tapping - For Aluminium - Stainless 316
Inserts - Self Tapping - For Aluminium - Stainless 316

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can vary on batches. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or hard plastics. Made from 316 stainless steel.

Related Information:


Inserts - Self Tapping - For Wood - Hex Drive - Flanged
Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Hex Drive - Flanged.


Inserts - Self Tapping - For Wood - Slotted Drive - Short
Inserts - Self Tapping - For Wood - Slotted Drive - Short

Also see combined categories:
All Self Tapping Inserts
All Self Tapping Inserts for Wood

Threaded inserts are screwed into pre-formed or pre-drilled holes and cut their own threads. Perfect for permanent installations.

Made from brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole. This category may be available in the new MBA online store at Inserts - Self Tapping - For Wood - Slotted Drive - Short.


Inserts - Tapered Fit - Finserts - For Wood and Plastics
Inserts - Tapered Fit - Finserts - For Wood and Plastics


Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout. This category may be available in the new MBA online store at Inserts - Tapered Fit - Finserts - For Wood and Plastics.


Magnets - Alcomax - Cylindrical Bar
Magnets - Alcomax - Cylindrical Bar

Also see combined categories:
All Magnets
All Alcomax Magnets

No keepers

This category may be available in the new MBA online store at Magnets - Alcomax - Cylindrical Bar.


Magnets - Alcomax - Power
Magnets - Alcomax - Power

Also see combined categories:
All Magnets
All Alcomax Magnets

Supplied with keeper

This category may be available in the new MBA online store at Magnets - Alcomax - Power.


Magnets - Alcomax - Rectangular Bar
Magnets - Alcomax - Rectangular Bar

Also see combined categories:
All Magnets
All Alcomax Magnets

No keepers

This category may be available in the new MBA online store at Magnets - Alcomax - Rectangular Bar.


Magnets - Alnico - Bar
Magnets - Alnico - Bar

Also see combined categories:
All Magnets
All Alnico Magnets

Cast Alnico 5 bar

This category may be available in the new MBA online store at Magnets - Alnico - Bar.


Magnets - Alnico - Button
Magnets - Alnico - Button

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper

This category may be available in the new MBA online store at Magnets - Alnico - Button.


Magnets - Alnico - Horseshoe
Magnets - Alnico - Horseshoe

Also see combined categories:
All Magnets
All Alnico Magnets

General purpose horseshoe magnet

This category may be available in the new MBA online store at Magnets - Alnico - Horseshoe.


Magnets - Alnico - Pocket Magnet
Magnets - Alnico - Pocket Magnet

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper

This category may be available in the new MBA online store at Magnets - Alnico - Pocket Magnet.


Magnets - Alnico - Rod - Sintered
Magnets - Alnico - Rod - Sintered

Also see combined categories:
All Magnets
All Alnico Magnets

Alnico sintered ASA 8HC

This category may be available in the new MBA online store at Magnets - Alnico - Rod - Sintered.

Related Information:


Magnets - Alnico - Shielded
Magnets - Alnico - Shielded

Also see combined categories:
All Magnets
All Alnico Magnets

This category may be available in the new MBA online store at Magnets - Alnico - Shielded.


Magnets - Alnico - Side Pole Rotator
Magnets - Alnico - Side Pole Rotator

Also see combined categories:
All Magnets
All Alnico Magnets

This category may be available in the new MBA online store at Magnets - Alnico - Side Pole Rotator.


Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit
Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. Press fit. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Blocks
Magnets - Ceramic Blocks

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Ring
Magnets - Ceramic Ring

Also see combined categories:
All Magnets
All Ceramic Magnets

This category may be available in the new MBA online store at Magnets - Ceramic Ring.


Magnets - Cup Assemblies - Clips
Magnets - Cup Assemblies - Clips

Also see combined categories:
All Magnets
All Cup Magnets

This category may be available in the new MBA online store at Magnets - Cup Assemblies - Clips.


Magnets - Cup Assemblies - Loop
Magnets - Cup Assemblies - Loop

Also see combined categories:
All Magnets
All Cup Magnets

Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.

Plated cup with a 9.525mm ID loop. This category may be available in the new MBA online store at Magnets - Cup Assemblies - Loop.


Magnets - Cup Assemblies - Stud
Magnets - Cup Assemblies - Stud

Also see combined categories:
All Magnets
All Cup Magnets

This category may be available in the new MBA online store at Magnets - Cup Assemblies - Stud.


Magnets - Cup Assemblies - Through Hole
Magnets - Cup Assemblies - Through Hole

Also see combined categories:
All Magnets
All Cup Magnets

This category may be available in the new MBA online store at Magnets - Cup Assemblies - Through Hole.


Magnets - Rare Earth - Plated
Magnets - Rare Earth - Plated

Also see combined categories:
All Magnets
All Rare Earth Magnets

Incredibly strong attraction and repulsion. Neodymium-Iron-Boron encased in nickel jackets to protect the brittle magnet material and prevent corrosion.

High strength to weight ratios. Commonly used in miniature applications such as linear actuators, sensing applications, gyroscopes, flow meters, recording devices, pacemakers and alternators. Temperature range -73 oC to 93 oC. Size tolerances +/- 0.13. This category may be available in the new MBA online store at Magnets - Rare Earth - Plated.


Magnets - Rare Earth - Shielded
Magnets - Rare Earth - Shielded

Also see combined categories:
All Magnets
All Rare Earth Magnets

Insulator shield prevents loss of magnetic flux when inserted into steel components or fixtures

Shielded magnets supply holding forces in limited areas of steel tools, dies and fixtures. This category may be available in the new MBA online store at Magnets - Rare Earth - Shielded.


Magnets - Rubber and Vinyl
Magnets - Rubber and Vinyl

Also see combined categories:
All Magnets

Magnetic Vinyl Sheets and Magnetic Rubber Strip

This category may be available in the new MBA online store at Magnets - Rubber and Vinyl.


Bearings - Peek - Single Row - with Glass Balls
Bearings - Peek - Single Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

PEEK (Polyetheretherketone), is a high temperature, high-performance engineering polymer.

Races made from PEEK - Balls made from 316 Stainless Steel - Cages from PEEK. PEEK offers chemical and water resistance similar to PPS (Polyphenylene Sulfide) but can operate at higher temperatures. PEEK can be used continuously to 338 Deg F (170 Deg C) and in hot water or steam without permanent loss in physical properties. Wear, Chemical & Hydrolysis Resistant. Exceptional performance over a wide range of temperatures and extreme conditions. Low Smoke and Toxic Gas Emission.

Related Information:


Bearings - Peek - Single Row - with 316 Stainless Steel Balls
Bearings - Peek - Single Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

PEEK (Polyetheretherketone), is a high temperature, high-performance engineering polymer.

Races made from PEEK - Balls made from Ground Glass - Cages from PEEK. PEEK offers chemical and water resistance similar to PPS (Polyphenylene Sulfide) but can operate at higher temperatures. PEEK can be used continuously to 338 Deg F (170 Deg C) and in hot water or steam without permanent loss in physical properties. Wear, Chemical & Hydrolysis Resistant. Exceptional performance over a wide range of temperatures and extreme conditions. Low Smoke and Toxic Gas Emission.

Related Information:


Clutches - Magnetic Particle 24VDC
Clutches - Magnetic Particle 24VDC

Also see combined categories:
All Magnetic Clutches

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start. This category may be available in the new MBA online store at Clutches - Magnetic Particle 24VDC.

Related Information:


Catches - Magnetic - Screw On
Catches - Magnetic - Screw On


Various styles - refer pictures

This category may be available in the new MBA online store at Catches - Magnetic - Screw On.


Catches - Magnetic - Ultra Thin - Heavy Duty
Catches - Magnetic - Ultra Thin - Heavy Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.

This category may be available in the new MBA online store at Catches - Magnetic - Ultra Thin - Heavy Duty.

Related Information:


Catches - Magnetic - Ultra Thin - Light Duty
Catches - Magnetic - Ultra Thin - Light Duty


Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.

This category may be available in the new MBA online store at Catches - Magnetic - Ultra Thin - Light Duty.

Related Information:


Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Also see combined categories:
All Disc Springs

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.


Motors - DC 22.4X38.0 mm
Motors - DC 22.4X38.0 mm

Also see combined categories:
All DC Motors

This category may be available in the new MBA online store at Motors - DC 22.4X38.0 mm.

Related Information:


Motors - DC 23.8X30.6 mm
Motors - DC 23.8X30.6 mm

Also see combined categories:
All DC Motors

12 VDC - 12,300 RPM unloaded at 4.5 volts

This category may be available in the new MBA online store at Motors - DC 23.8X30.6 mm.

Related Information:


Motors - DC 24.3X12.35 mm
Motors - DC 24.3X12.35 mm

Also see combined categories:
All DC Motors

6.0 VDC - 4,900 RPM unloaded at 4.5 volts

This category may be available in the new MBA online store at Motors - DC 24.3X12.35 mm.

Related Information:


Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.