Protective Packing and Sleeves
Low cost protection for threaded and cylindrical parts
Elastic snug tight fit protective sleeve fits over straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).
O-Rings
General purpose. Includes o-rings for dental handpiece applications.
Temperature Range: -30
oC to +90
oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at
O-Rings - Nitrile Rubber.
Related Information:
Linear Slides
Stainless Steel throughout (similar to 440C). Speed: 0.5 m/sec (30 m/min). Temperature: +100oC (Continuous), +140oC (Maximum). Life will be less than normal at +100oC and dimensions may change. Lateral Loading: Dynamic x 1.13 C - Static x 1.19 Co. Precision Linear Slide Unit is a compact linear motion rolling guide for limited stroke length.
You may also be interested in
Knobs Knurled
Related Information:
Knobs Thumb
Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30
oC to +140
oC. This category may be available in the new MBA online store at
Knobs - Thumb - Female.
Related Information:
Knobs Wing
Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30
oC to +140
oC. This category may be available in the new MBA online store at
Knobs - Wing - Male.
Related Information:
Spring Motors
Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.
O-Rings
Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.
Nitrile: Temp Range: -30
oC to +90
oC / Fluoroelastomer: Temp Range -20
oC to +240
oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (Viton
(R)): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. This category may be available in the new MBA online store at
O-Rings - Cord.
Related Information:
Knobs Wing
Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30
oC to +140
oC. This category may be available in the new MBA online store at
Knobs - Wing - Female - Contoured.
Related Information:
Oil Seals
DIN 3760 - General purpose grease and oil sealing. Note - metal cased and rubber cased seals may be interchanged at our discretion. If one or the other is specifically required please let us know when ordering.
Operating Temp. Range: -30
oC to +90
oC. The rubber elastomer outer covering tolerates thermal expansion as well as roughness in the housing bore. Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. This category may be available in the new MBA online store at
Oil Seals - Nitrile Rubber.
Knobs Star
Also see lobe knobs
Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30
oC to +140
oC. This category may be available in the new MBA online store at
Knobs - Star - Female - Plastic.
Related Information:
Also see lobe knobs
Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30
oC to +140
oC. This category may be available in the new MBA online store at
Knobs - Star - Male - Plastic.
Related Information:
O-Rings
Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.
Temperature Range: -30
oC to +90
oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings. This category may be available in the new MBA online store at
O-Rings - Quad.
Related Information:
Knobs Push Pull
Contoured knobs plated Steel threaded female inserts. Fitted with generous dome to shank ratios to accommodate both push and pull operations. Temperature Range: -30
oC to +140
oC. This category may be available in the new MBA online store at
Knobs - Push-Pull.
Related Information:
Knobs Lever
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30
oC to +140
oC. All knobs are fitted with a brass female insert. This category may be available in the new MBA online store at
Knobs - Lever - Threaded Bore.
Related Information:
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30
oC to +140
oC. All knobs are fitted with a brass female insert. This category may be available in the new MBA online store at
Knobs - Lever - Through Bore.
Related Information:
Plungers Ball
With Long-Lok thread locking compound to prevent loosening
Unthreaded
Body BSD: Pom (Delrin) BSD-SS: W.-Nr 1.4305 (303) Stainless Steel. Sleeve BSD: Thermoplastic BSD-SS: Stainless Steel. Ball: W.-Nr 1.4034 (420) Stainless Steel. Spring: W.-Nr 1.4310 (301) Stainless Steel. Surface Finish BSD: Ball hardened, bright BSD-SS: Bright.
Plungers Indexing
With thermoplastic knob
With thermoplastic knob
With thermoplastic knob
With thermoplastic knob
Gearbox Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Plungers Indexing
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
With thermoplastic knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
With thermoplastic knob
With thermoplastic knob
Plungers Spring
303 Stainless Steel.
Plungers Indexing
Related Information:
Related Information:
Plungers Spring
300 series stainless with 17-7 stainless spring
303 Stainless Steel body and acetal nose
303 Stainless Steel.
Thread Inserts
Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings. Also known as threaded inserts.
Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.
MRI Table Bearings
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Plungers Spring
White acetal plastic handle . 303 stainless steel body and plunger.
White acetal plastic handle . 303 stainless steel body and plunger.
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138616
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.