Gas Springs Categories (Stocked Items Only)

Spring Assemblies - Small Bracket - RINO

Search Rating: 59%

Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Spring Motor Assemblies - Open - RINO

Search Rating: 59%

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.

Spring Motors - RINO

Search Rating: 59%

Also see combined categories:
All Spring Motors

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Springs - Compression - Conical

Search Rating: 59%

Also see combined categories:
All Conical Springs

Conical 302 Stainless steel springs

Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate.

Springs - Compression - Long Lengths - Music Wire

Search Rating: 59%

Also see combined categories:
All Compression Springs

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Springs - Compression - Long Lengths - Stainless Steel

Search Rating: 59%

Also see combined categories:
All Compression Springs

1 metre and half metre lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Springs - Compression - Standard - Stainless Steel

Search Rating: 59%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Springs - Compression - Standard - Steel

Search Rating: 59%

Also see combined categories:
All Compression Springs

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Springs - Constant Force

Search Rating: 59%

301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Springs - Die - Imperial - Heavy Duty

Search Rating: 59%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Springs - Die - Metric - Extra Heavy Duty

Search Rating: 59%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded yellow

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Die - Metric - Heavy Duty

Search Rating: 59%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Die - Metric - Light Duty

Search Rating: 59%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Die - Metric - Medium Duty

Search Rating: 59%

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230^oC (Loss of load occurs above +120^oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Springs - Extension - Music Wire

Search Rating: 59%

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 ^oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 ^oC (500 Deg F). 302 stainless steel is slightly magnetic.

Springs - Extension - Stainless Steel

Search Rating: 59%

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 ^oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 ^oC (500 Deg F). 302 stainless steel is slightly magnetic.

Springs - Torsion - Right Hand Wound

Search Rating: 59%

Also see combined categories:
All Torsion Springs

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.

Latches - Spring Loaded

Search Rating: 59%

Steel construction with either black enamel or chrome finish. 90^o or straight mounting options. Keeper included.

Plungers - Spring - Knurled Handle - Locking - Steel-Acetal

Search Rating: 59%

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Stainless

Search Rating: 59%

Also see combined categories:
All Threaded Spring Plungers

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel

Search Rating: 59%

Also see combined categories:
All Threaded Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel-Acetal

Search Rating: 59%

Also see combined categories:
All Threaded Spring Plungers

Acetal nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Plungers - Spring - Threaded - Steel - Threadlock

Search Rating: 59%

Also see combined categories:
All Threaded Spring Plungers

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Washers - Spring - 2 Wave Type

Search Rating: 59%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

Washers - Spring - 3 Wave Type - 302 Stainless Steel

Search Rating: 59%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - 3 Wave Type - 400 Grade Stainless

Search Rating: 59%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - 3 Wave Type - Berryllium Copper

Search Rating: 59%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - 3 Wave Type - Carbon Steel

Search Rating: 59%

Also see combined categories:
All Wave Washers

Wave Washers - also called crinkle wave.

Washers - Spring - Curved - Carbon Steel

Search Rating: 59%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.

Washers - Spring - Curved - Stainless Steel

Search Rating: 59%

Also see combined categories:
All Wave Washers

Wave Washers - All Materials.

ID and OD are long axis dimensions.

Strip - Spring Steel

Search Rating: 59%

Also see combined categories:
All Metal Strip

Hundreds of uses.

Hardened and tempered spring steel strip. Note that the width of this strip may vary minus nothing to plus 25 percent as it is guillotine cut from sheet. If you require a closer tolerance on the strip width please contact us prior to ordering.

Anchors - Spring - Stainless Steel

Search Rating: 59%

Also see combined categories:
All Spring Anchors

An economical way to secure the ends of extension springs, and provide easy adjustment.

300 Grade Stainless Steel.

Anchors - Spring - Steel

Search Rating: 59%

Also see combined categories:
All Spring Anchors

An economical way to secure the ends of extension springs, and provide easy adjustment.

C-12114 Steel with Black Oxide Finsh.

Posts - Spring

Search Rating: 59%

Joints - Clevis - Spring Clips

Search Rating: 58%

Made from 9SMn steel. Used like a clevis pin but with a clip to hold them to the body of the clevis joint. Check clevis joint body size for suitability.

Steel 9 SMn 28K (550-700 N/mm2). See also yokes.

Washers - Disc Spring - Ball Bearing Type

Search Rating: 58%

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Also known as belleville washers.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Washers - Disc Spring - Carbon Steel

Search Rating: 58%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Washers - Disc Spring - Plastic

Search Rating: 58%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb^(R) material.

Washers - Disc Spring - Stainless Steel

Search Rating: 58%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Wire - Brass

Search Rating: 58%

Also see combined categories:
All Spring Wire

Brass

Shipped in straight lengths on wood backing board.

Wire - Steel - Spring - Music - Coils

Search Rating: 58%

Also see combined categories:
All Spring Wire

SAE 1090 Spring Steel.

Wire - Steel - Spring - Music Wire - Short Lengths

Search Rating: 58%

Also see combined categories:
All Spring Wire

SAE 1090 Spring Steel. Includes inch and metric sizes.

Shipped in straight lengths on wooden backing board. Metric and imperial.

Washers - Flat - Carbon Spring Steel - Precision Shim

Search Rating: 58%

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Snap Buttons - Single End - Spring Leg

Search Rating: 57%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Washers - Lock - External Tooth - Spring Steel

Search Rating: 57%

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.

Washers - Lock - Internal Tooth - Spring Steel

Search Rating: 57%

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Assortment Kits - Various

Search Rating: 57%

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins

Washers - Serrated - Safety

Search Rating: 57%

Also see combined categories:
All Serrated Locking Washers

Spring Steel Hardened Black.

Clutch Parts - Remote Control

Search Rating: 56%

Clutch Shoes, Springs, Clutch Bells

Clutch Shoes, Springs, Bells and Complete for Remote Control Cars.

Pins - Dowel Bushings

Search Rating: 56%

Also see combined categories:
All Dowel Bushings

Series DB100 Spirol

Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12.

Pins - Pull - Round Handle - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Pins - Roll - Carbon Steel

Search Rating: 56%

Also see combined categories:
All Roll Pins

Plain carbon spring steel DIN1481.

Pins - Roll - Zinc Plated

Search Rating: 56%

Also see combined categories:
All Roll Pins

Zinc plated spring steel DIN1481.

Circlips - External - Inverted

Search Rating: 55%

Also see combined categories:
All External Circlips

N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips.

Pins - Pull - Tee Handle - Aluminium and Steel

Search Rating: 55%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Spiral Rings - Internal - Light Duty

Search Rating: 54%

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.

Bushings - Tension

Search Rating: 54%

Like a heavy duty roll pin.

Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications.

Exhausts - Remote Control

Search Rating: 54%

Exhausts for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.

Spiral Rings - External - Heavy Duty

Search Rating: 53%

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.

Spiral Rings - External - Medium Duty

Search Rating: 53%

Also see combined categories:
All External Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.

Spiral Rings - Internal - Medium-Heavy Duty

Search Rating: 53%

Also see combined categories:
All Internal Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.

Spiral Rings - Internal - Medium Duty

Search Rating: 53%

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.

Exhaust Couplers - Remote Control

Search Rating: 53%

Exhaust couplers for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.

Exhaust Deflectors - Remote Control

Search Rating: 53%

Exhaust deflectors for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.

Exhaust Seals - Remote Control

Search Rating: 53%

Exhaust seals for Remote Control Cars

Exhaust Pipes, Headers, Springs, Couplers for 1/10, 1/8 and 1/5 Scale Cars.

Tools - Wire Working

Search Rating: 53%

Also see combined categories:
All Tools

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.

E-Clips - Basic - Carbon Steel

Search Rating: 52%

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated.

Washers - Lock - Tabbed - Heavy Duty

Search Rating: 52%

Also see combined categories:
All Tabbed Lock Washers
All Lock Washers

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.

Plungers - Indexing - Locking - With Mounting Plate - Steel

Search Rating: 51%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.

Latches - Slam Action - Slide

Search Rating: 50%

Fast snap in installation. Made from non-corrosive materials, black ABS plastic and stainless steel spring. Push to close latching.

Pins - Ball Lock - Ball Handle - Plastic Handle

Search Rating: 49%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Also called detent pins.

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Search Rating: 49%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle. Also called detent pins.

Pins - Ball Lock - T-Handle - Plastic Handle

Search Rating: 49%

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Tee handle. Also called detent pins.

Snap Buttons - Double End

Search Rating: 49%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Collectibles - Metal Motorcycles

Search Rating: 49%

Beautiful model motorbikes in various styles including choppers, road bikes and vintage designs.

Made from industrial parts including bearings, screws, nuts, springs, chain links, rod, tubing and other parts. Two colours available - gunmetal grey or copper finish. Each bike is hand made, and therefore there may be minor differences between the bikes of a particular model. Re-Cycle motorbikes are a limited edition set of 20.

Snap Buttons - Single End - Dog Leg

Search Rating: 48%

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Collars - Shaft - Gripfast - ABS Plastic

Search Rating: 47%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Pins - Clevis - Zinc Plated

Search Rating: 43%

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Made from low carbon steel.