Gas Springs Adjustable Force Categories


Category Matches

Gas Springs

TopHide Pictures

Gas Springs - Adjustable Force
Gas Springs - Adjustable Force

Search Rating: 92%

Also see combined categories:
All Gas Springs


Latches Adjustable

TopHide Pictures

Latches - Adjustable Lever
Latches - Adjustable Lever

Search Rating: 69%

Die cast zinc with stainless steel springs and roll pins. Available in textured chrome or matte black powder coat. Working load 130kg. Ultimate load 210kg. M5 screws with lock washer supplied. Single hole installation.


Circlips

TopHide Pictures

Circlips - External - Grooveless
Circlips - External - Grooveless

Search Rating: 50%

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:

Springs Constant Force

TopHide Pictures

Springs - Constant Force
Springs - Constant Force

Search Rating: 49%

301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Related Information:

Gas Springs

TopHide Pictures

Gas Springs - Fixed Force
Gas Springs - Fixed Force

Search Rating: 48%

Also see combined categories:
All Gas Springs


Spring Assemblies

TopHide Pictures

Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO

Search Rating: 46%

Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:

Springs Disc

TopHide Pictures

Washers - Disc Spring - Plastic
Washers - Disc Spring - Plastic

Search Rating: 45%

Also see combined categories:
All Disc Springs

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.


Cams

TopHide Pictures

Cams - Adjustable
Cams - Adjustable

Search Rating: 44%

Also see combined categories:
All Cams

Related Information:

Handles

TopHide Pictures

Handles - Adjustable - Stud
Handles - Adjustable - Stud

Search Rating: 44%

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Handles - Adjustable - Tapped and Reamed
Handles - Adjustable - Tapped and Reamed

Search Rating: 44%

Adjustable Handles

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with either a Tapped or Reamed Hole. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the insert remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.


Latches Adjustable

TopHide Pictures

Latches - Adjustable
Latches - Adjustable

Search Rating: 44%

These latches can be used in applications where variances occur. Zinc plated steel. Keepers need to be ordered separately. Either keeper can be used with either of the listed latches.


Latches - Adjustable - Catchbolt -tm-
Latches - Adjustable - Catchbolt -tm-

Search Rating: 44%

Holds firmly in three directions. Initial action pulls two parts together. As lever is latched an integral deadbolt slides into keeper forcing a panel or door to stay firmly in place with no movement in any direction.

Six mounting holes ar 4mm diameter. Latch height when closed is 18mm. 302/304 Stainless Steel.


Latches - Adjustable Draw - With Hook - Stainless
Latches - Adjustable Draw - With Hook - Stainless

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated 300 Grade Stainless Steel.


Latches - Adjustable Draw - With Hook - Steel
Latches - Adjustable Draw - With Hook - Steel

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated zinc plated steel with yellow vinyl grip.


Latches - Adjustable Draw - With Keeper - Stainless
Latches - Adjustable Draw - With Keeper - Stainless

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated 300 Grade Stainless Steel.


Latches - Adjustable Draw - With Keeper - Steel
Latches - Adjustable Draw - With Keeper - Steel

Search Rating: 44%

Threaded rod allows periodic adjustments where gasketing and material tolerances may vary. Passivated zinc plated Steel.


Latches - Adjustable Grip
Latches - Adjustable Grip

Search Rating: 44%

Made of carbon steel with black nylon knob. A quarter turn latches or unlatches. Knob includes pawl indicator to make sure pawl is in the proper position.


Latches - Adjustable Grip - Miniature
Latches - Adjustable Grip - Miniature

Search Rating: 44%

Rugged construction. Single hole installation. Made from zinc plated steel.

Max working load 15kg. Ultimate load 40kg. Choice of black nylon head or low profile slotted head.


Latches - Adjustable Grip With Arrowhead
Latches - Adjustable Grip With Arrowhead

Search Rating: 44%

Arrow designates position of pawl. Latch operates through 90o rotation with a positive lock stop at both extremes. Use in either clockwise or counterclockwise applications. Panel thickness from 1.6mm to 4.7mm.

Knob height is adjustable. Grip range 4.05mm to 28.2mm with pawk reversed.


Latches - Adjustable - Junior ProLatch -tm-
Latches - Adjustable - Junior ProLatch -tm-

Search Rating: 44%

Ultimate breaking strength 145kg. Keeper must be ordered separately.

Zinc plated steel.


Latches - Adjustable - ProLatch -tm-
Latches - Adjustable - ProLatch -tm-

Search Rating: 44%

Ultimate breaking strength 310kg. Keeper must be ordered separately.

Zinc plated steel.


Tensioners

TopHide Pictures

Tensioner - Adjustable Screw
Tensioner - Adjustable Screw

Search Rating: 44%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.

Idler shaft and pulleys not included with tensioner.

Related Information:

Latches Other

TopHide Pictures

Latches - Toggle - Adjustable Grip
Latches - Toggle - Adjustable Grip

Search Rating: 44%

Adjustable grip. Ultimate strength 350kg. Working strength 260kg.

These adjustable grip toggle latches allow you to easily adjust both the grip length and lock tensions. The optional secondary latch prevents accidental opening. Made from cold rolled steel. Zinc plated with a bright chromate finish. Strikes need to be purchased separately.


Pins Clevis

TopHide Pictures

Pins - Clevis - Adjustable
Pins - Clevis - Adjustable

Search Rating: 44%

Also see combined categories:
All Clevis Pins - Adjustable

Multihole clevis pins for quick and easy adjustments

Made from 1010, 1018 or 1022 steel.

Related Information:

Lifting Chain

TopHide Pictures

Slings - Chain - Adjustable
Slings - Chain - Adjustable

Search Rating: 44%

Also see combined categories:
All Slings

Very easily adjustable chain slings. Ideal for machine shop or maintenance departments.

Made with grade 80 alloy chain. Proof tested and certified to comply with OSHA.


Tensioners

TopHide Pictures

Tensioner - Drive - Adjustable Angle
Tensioner - Drive - Adjustable Angle

Search Rating: 44%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:

Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Search Rating: 44%

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:

Shock Absorbers

TopHide Pictures

Shock Absorbers - Adjustable
Shock Absorbers - Adjustable

Search Rating: 44%

Also see combined categories:
All Shock Absorbers


Shock Absorbers - Adjustable - Miniature
Shock Absorbers - Adjustable - Miniature

Search Rating: 44%

Also see combined categories:
All Shock Absorbers


Latches Other

TopHide Pictures

Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip

Search Rating: 43%

Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.


Latches - 200 Series - Adjustable Grip
Latches - 200 Series - Adjustable Grip

Search Rating: 43%

Ultimate strength 355kg. Working strength 265kg.


Shock Absorbers

TopHide Pictures

Shock Absorbers - Hydraulic - Adjustable - C-Jac
Shock Absorbers - Hydraulic - Adjustable - C-Jac

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Shock Absorbers - Hydraulic - Adjustable - Double Acting
Shock Absorbers - Hydraulic - Adjustable - Double Acting

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Shock Absorbers - Hydraulic - Adjustable - Low Profile
Shock Absorbers - Hydraulic - Adjustable - Low Profile

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Shock Absorbers - Hydraulic - Adjustable - Small
Shock Absorbers - Hydraulic - Adjustable - Small

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Adjusters

TopHide Pictures

Adjusters - Rigid
Adjusters - Rigid

Search Rating: 43%

Also see combined categories:
All Mounting Feet

Adjustable supports for all kinds of machinery.

Mild steel bright zinc plated. Screwdriver cross recess in base. Use as mounting feet.

Related Information:

Adjusters - Tilt
Adjusters - Tilt

Search Rating: 43%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Adjustable supports for all kinds of machinery. Mounting feet levelers.

Stem: Mild steel bright zinc plated. Base: Polythene or Polypropylene. Angle of Tilt: 25o from perpendicular. Hexagon Nut: 12mm A/F. Standard colour: Black.

Related Information:

Shock Absorbers

TopHide Pictures

Shock Absorbers - Full Threaded - Adjustable
Shock Absorbers - Full Threaded - Adjustable

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Large Handle
Plungers - Indexing - Large Handle

Search Rating: 43%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish.


Pins Pull

TopHide Pictures

Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Threaded End - Steel
Pins - Pull - Threaded End - Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Non Locking - Steel
Plungers - Indexing - Non Locking - Steel

Search Rating: 43%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Plungers - Indexing - Precision - Ball Grip
Plungers - Indexing - Precision - Ball Grip

Search Rating: 43%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Pins Pull

TopHide Pictures

Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Threaded End - Stainless Steel
Pins - Pull - Threaded End - Stainless Steel

Search Rating: 43%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.


Shock Absorbers

TopHide Pictures

Shock Absorbers - Full Threaded - Low Velocity Adjustable
Shock Absorbers - Full Threaded - Low Velocity Adjustable

Search Rating: 43%

Also see combined categories:
All Shock Absorbers


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Locking - With Knob - Steel
Plungers - Indexing - Locking - With Knob - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Plungers - Indexing - Locking - With Shoulder - Steel
Plungers - Indexing - Locking - With Shoulder - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Plungers - Indexing - Non Locking - Stainless Steel
Plungers - Indexing - Non Locking - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Plungers - Indexing - Precision - Locking - Ball Grip
Plungers - Indexing - Precision - Locking - Ball Grip

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Pins Pull

TopHide Pictures

Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Search Rating: 42%

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Locking - With Mounting Plate - Steel
Plungers - Indexing - Locking - With Mounting Plate - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.


Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Plungers - Indexing - Locking - With Shoulder - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Plungers - Indexing - Non Locking - With Knob - Steel
Plungers - Indexing - Non Locking - With Knob - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Plungers - Indexing - Non Locking - Without Knob - Steel
Plungers - Indexing - Non Locking - Without Knob - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.


Plungers - Indexing - Precision - With Support - Ball Grip
Plungers - Indexing - Precision - With Support - Ball Grip

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover
Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover

Search Rating: 42%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration. Adjusters.

Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load.


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.


Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Plungers - Indexing - Non Locking - With Mounting Plate - Steel

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel.


Plungers - Indexing - Precision - With Support - Locking - Ball Grip
Plungers - Indexing - Precision - With Support - Locking - Ball Grip

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.


Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob
Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.


Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob
Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob

Search Rating: 42%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.


Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel
Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel

Search Rating: 41%

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124306 products in 3086 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.