Dual Eye Joints Categories (Short Delivery Items)


Category Matches

Cross Blocks

TopHide Pictures

Joints - Swivel - Miniature - Steel
Joints - Swivel - Miniature - Steel

Search Rating: 100%

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Ball Joints

TopHide Pictures

Joints - Ball and Socket - Right Angle - Light Duty
Joints - Ball and Socket - Right Angle - Light Duty

Search Rating: 100%

Light duty ball joints provide a pivot point. They are unhardened and should not be used for high load or high repetition applications. Clearance is not specified, so actual joints may range from very loose to reasonably tight.

Steel Type: Zinc Passivated Induction Hardened. Stainless Steel Type: 303 Grade unhardened. Max. Static push/pull loads are valid for both radial and axial loads. Standard Steel type Ball Stud Tensile strength: Rm = 600 N/mm sq (Not applicable to stainless type). Standard Steel type Housing Tensile strength: Rm = 500 N/mm sq (Not applicable to stainless type).


Clevis Joints

TopHide Pictures

Joints - Clevis - Plastic
Joints - Clevis - Plastic

Search Rating: 100%

Also see combined categories:
All Clevis Joints

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.


Joints - Clevis - Spring Clips
Joints - Clevis - Spring Clips

Search Rating: 100%

Made from 9SMn steel. Used like a clevis pin but with a clip to hold them to the body of the clevis joint. Check clevis joint body size for suitability.

Steel 9 SMn 28K (550-700 N/mm2). See also yokes.

Related Information:

Joints - Clevis - Steel
Joints - Clevis - Steel

Search Rating: 100%

Also see combined categories:
All Clevis Joints

Made from zinc plated 9SMn steel.

Steel 9 SMn 28K (550-700 N/mm2). Zinc plate and clear passivated. Pin not included. See also yokes.

Related Information:

Tee Joints

TopHide Pictures

Joints - Tee - Tubing and Rod
Joints - Tee - Tubing and Rod

Search Rating: 100%

Inexpensive nylon joiners for hobby tubing and rod


Universal Joints Double

TopHide Pictures

Universal Joints - Double Joint - Hobby
Universal Joints - Double Joint - Hobby

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Double Joint Universals

C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.


Universal Joints - Double Joint - Plastic - Brass Bore Inserts
Universal Joints - Double Joint - Plastic - Brass Bore Inserts

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Double Joint Universals

Plain acetal with brass centre, brass bore inserts and grub screw holes


Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Plain Bore
Universal Joints - Single Joint - High Speed - Plain Bore

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.

Related Information:

Universal Joints - Single Joint - Hobby
Universal Joints - Single Joint - Hobby

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Single Joint Universals

C45 Carbon Steel. Maximum operating angle 30 degree. Slow speed only.


Universal Joints - Single Joint - Plastic
Universal Joints - Single Joint - Plastic

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Plain acetal with no inserts or grub screw holes


Universal Joints - Single Joint - Plastic - Brass Bore Inserts
Universal Joints - Single Joint - Plastic - Brass Bore Inserts

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Plain acetal with brass centre, brass bore inserts and grub screw holes


Universal Joints - Single Joint - Plastic - Brass Spider
Universal Joints - Single Joint - Plastic - Brass Spider

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Plain acetal with brass centre, no bore inserts or grub screw holes


Universal Joints - Single Joint - Slow Speed - Plain Bore
Universal Joints - Single Joint - Slow Speed - Plain Bore

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables). For hand operated applications. Includes miniature sizes from 3mm OD.

Related Information:

Universal Joints Telescoping

TopHide Pictures

Universal Joints - Telescoping - Plastic - Brass Spider and Insert
Universal Joints - Telescoping - Plastic - Brass Spider and Insert

Search Rating: 99%

Also see combined categories:
All Universal Joints
All Telescoping Universals

Acetal plastic telescoping universal joints with nickle plated brass spiders and bore inserts


Universal Joint Covers

TopHide Pictures

Covers - Universal Joint - Elasticate Rubber
Covers - Universal Joint - Elasticate Rubber

Search Rating: 99%

Also see combined categories:
All Universal Joint Covers

For Single and Double Universal Joints.

-27 oC to 70 Deg C temp range (constant). -32 oC to 120 Deg C temp range (intermittent).

Related Information:

Yoke Ends

TopHide Pictures

Yoke Ends - Threaded
Yoke Ends - Threaded

Search Rating: 88%

Also see combined categories:
All Yoke Ends

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:

Rod Ends Standard

TopHide Pictures

Rod Ends - Steel - Bronze Lined - Female
Rod Ends - Steel - Bronze Lined - Female

Search Rating: 87%

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Rod Ends - Steel - Bronze Lined - Male
Rod Ends - Steel - Bronze Lined - Male

Search Rating: 87%

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Rod Ends Plastic

TopHide Pictures

Rod Ends - Plastic - Female
Rod Ends - Plastic - Female

Search Rating: 86%

Also see combined categories:
All Female Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.


Rod Ends - Plastic - Male
Rod Ends - Plastic - Male

Search Rating: 86%

Also see combined categories:
All Male Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.


Rod Ends Stainless Steel

TopHide Pictures


Rod Ends Stamped

TopHide Pictures

Rod Ends - Steel - Stamped - Female
Rod Ends - Steel - Stamped - Female

Search Rating: 85%

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.


Yoke Ends

TopHide Pictures

Yoke Ends - Blank
Yoke Ends - Blank

Search Rating: 84%

Also see combined categories:
All Yoke Ends

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:

Rod Ends PTFE Lined

TopHide Pictures

Rod Ends - Steel - PTFE Lined - Tight Fit - Male
Rod Ends - Steel - PTFE Lined - Tight Fit - Male

Search Rating: 81%

Also see combined categories:
All Male Rod Ends
All Steel Male Rod Ends

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Dual Vee Bearings

TopHide Pictures

Dual Vee - Adaptor Bushings
Dual Vee - Adaptor Bushings

Search Rating: 80%

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller bushings.

Stationary bushings have a concentric hole. Adjustable bushings have an eccentric hole allowing positioning of the guide wheel as the bush is turned.

Related Information:

Dual Vee - Guide Wheels
Dual Vee - Guide Wheels

Search Rating: 80%

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels with Abec 5 precision bearings.

Match with correct Track Size.

Related Information:

Dual Vee - Guide Wheels - Studded
Dual Vee - Guide Wheels - Studded

Search Rating: 80%

Also see combined categories:
All Dual Vee Guide Wheels

Vee grooved track roller guide wheels.

Match with correct Track Size. Note! OD is reference only. Allow up to 1.2 mm larger than listed.

Related Information:

Dual Vee - Tracks with Mounting Holes - Stainless Steel
Dual Vee - Tracks with Mounting Holes - Stainless Steel

Search Rating: 80%

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

Dual Vee - Tracks with Mounting Holes - Steel
Dual Vee - Tracks with Mounting Holes - Steel

Search Rating: 80%

Also see combined categories:
All Dual Vee Tracks

Vee guide rails for vee grooved track roller guide wheels.

Match Track Size with same size Guide Wheel.

Related Information:

Kites

TopHide Pictures

Kites - Dual Control
Kites - Dual Control

Search Rating: 79%

Also see combined categories:
All Kites

Stunt and Trick Kites


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Kites - Dual Control.

Pulleys Vee

TopHide Pictures

Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron

Search Rating: 73%

Also see combined categories:
All Vee Pulleys A Section 12.5 and 12.7mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed.

Related Information:

Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron
Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron

Search Rating: 73%

Also see combined categories:
All Vee Pulleys M Section 10mm Top Width

Dual purpose pulleys suit A section and M section belts

To determine the pitch diameter for A section add 8.636mm (0.34 inch) to the pitch diameter listed.

Related Information:

Cable

TopHide Pictures

Attachments - Eyes - Synchromesh
Attachments - Eyes - Synchromesh

Search Rating: 60%

Also see combined categories:
All Synchromesh Attachments

Use with synchromesh or standard miniature cable

Recommended dimensions after crimping:. 1.05 Cable - A=2.59. 2.06 Cable - A=2.64. 2.60 Cable - A=2.72. 3.40 Cable - A=2.80 (3.40 Cable must have outer helical wire removed prior to crimping).

Related Information:

Pulley Blocks

TopHide Pictures

Pulleys - Blocks - Eye - Fixed
Pulleys - Blocks - Eye - Fixed

Search Rating: 59%

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Pulleys - Blocks - Eye - Swivel
Pulleys - Blocks - Eye - Swivel

Search Rating: 59%

Also see combined categories:
All Pulley Blocks

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Rod Ends Aluminium

TopHide Pictures

Rod Ends - Aluminium - Female - Hobby
Rod Ends - Aluminium - Female - Hobby

Search Rating: 53%

Aluminum Alloy Rod ends for RC Cars

Extended eye. Very loose eye.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Rod Ends - Aluminium - Female - Hobby.

Games General

TopHide Pictures

Games - Strategy
Games - Strategy

Search Rating: 50%

Also see combined categories:
All Games and Gadgets

Strategy Games including Wooden and other games. Ideal gifts for thinking people.

Gobblet on the Go - Ringgz - Double Shutter - Eye of Horus - Khet - Tower of Kadesh - Giza - Dividends. Jumping Java - Logan Stones - Hive - Army of Frogs - Quarto - Quixo - Quoridor - Batik - Pylos. Skybridge - Inside - Eclipse - Gipf - Zertz - Dvonn - Yinsh - Punct - Tamsk - Abalone - Pentago - Columns. Trinidad - Fire and Ice - Cityscape - Poison Pot - Zaroc - Megalith - Tantrix - Yikers.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Games - Strategy.

Bearings One Way Clutch

TopHide Pictures

Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Search Rating: 46%

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:

Hoist Rings

TopHide Pictures

Washers - Bevel
Washers - Bevel

Search Rating: 21%

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124193 products in 3081 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.