Drylin Bearings And Systems Categories (Stocked Items Only)


Category Matches

Drylin Bearings and Systems

TopHide Pictures

Drylin Sliding Bearings
Drylin Sliding Bearings

Search Rating: 100%

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Drylin Sliding Bearings. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Drylin Sliding Bearings.

Drylin - Linear - Slides and Carriages - Size 27
Drylin - Linear - Slides and Carriages - Size 27

Search Rating: 98%

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 290 g/m. Carriage Weight: 10.8 or 12.5g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Related Information:

The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Drylin - Linear - Slides and Carriages - Size 27.

Bearings Special Purpose

TopHide Pictures

Bearings - Chamfered Edges
Bearings - Chamfered Edges

Search Rating: 55%

Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Chamfered Edges. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Chamfered Edges.

Shafting Aluminium

TopHide Pictures

Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Search Rating: 54%

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Supported - Pre-Drilled - Aluminium. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Shafting - Supported - Pre-Drilled - Aluminium.

Shafting - Aluminium
Shafting - Aluminium

Search Rating: 54%

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Aluminium. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Shafting - Aluminium.

Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Search Rating: 53%

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Shafting - Pipe - Aluminium. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Shafting - Pipe - Aluminium.

Bearings Special Purpose

TopHide Pictures

Bearings - Spherical OD
Bearings - Spherical OD

Search Rating: 53%

Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Spherical OD. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Spherical OD.

Ball Transfers

TopHide Pictures

Ball Transfer Units - Base Mount - Standard - Steel
Ball Transfer Units - Base Mount - Standard - Steel

Search Rating: 52%

Also see combined categories:
All Base Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Base Mount - Standard - Steel. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Ball Transfer Units - Base Mount - Standard - Steel.

Ball Transfer Units - Screw Stem - Stainless - Precision
Ball Transfer Units - Screw Stem - Stainless - Precision

Search Rating: 52%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Search Rating: 52%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Screw Stem - Steel - Precision. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Ball Transfer Units - Screw Stem - Steel - Precision.

Ball Transfer Units - Flange Mount - Standard - Stainless - Deep
Ball Transfer Units - Flange Mount - Standard - Stainless - Deep

Search Rating: 52%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Standard - Stainless - Deep. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Ball Transfer Units - Flange Mount - Standard - Stainless - Deep.

Ball Transfer Units - Flange Mount - Standard - Stainless - Slim
Ball Transfer Units - Flange Mount - Standard - Stainless - Slim

Search Rating: 52%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Standard - Stainless - Slim. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Ball Transfer Units - Flange Mount - Standard - Stainless - Slim.

Ball Transfer Units - Flange Mount - Standard - Steel - Slim
Ball Transfer Units - Flange Mount - Standard - Steel - Slim

Search Rating: 52%

Also see combined categories:
All Flange Mount Ball Transfers

Single ball bearings units for conveyor systems


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Flange Mount - Standard - Steel - Slim. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Ball Transfer Units - Flange Mount - Standard - Steel - Slim.

Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Search Rating: 52%

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Ball Transfer Units - Screw Stem - Brass and Aluminium. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Ball Transfer Units - Screw Stem - Brass and Aluminium.

Clips

TopHide Pictures

Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Search Rating: 49%

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.


The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Snap Rings - Internal - Basic.

Bearings Acetal

TopHide Pictures

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Search Rating: 31%

Also see combined categories:
All Plastic Ball Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range may be found in the Bearing Shop Online website. Follow the link to see the range: Bearings - Acetal - Double Row - with 316 Stainless Steel Balls. The Minibearings website has a huge range of miniature and specialty bearings listed. Check it for miniature Bearings - Acetal - Double Row - with 316 Stainless Steel Balls.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124406 products in 3083 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.