Collars Shaft With Integral Shim Categories


Category Matches

Collars

TopHide Pictures

Collars - Shaft - With Integral Shim
Collars - Shaft - With Integral Shim

Search Rating: 78%

Also see combined categories:
All Round Bore Shaft Collars

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Related Information:

Assortments

TopHide Pictures

Assortment Kits - Various
Assortment Kits - Various

Search Rating: 55%

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Assortment Kits - Various.

Hobby Shafting

TopHide Pictures

Shafting - Ground - Hobby - Steel
Shafting - Ground - Hobby - Steel

Search Rating: 44%

Also see combined categories:
All Shafting
All Steel Shafting

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Shafting - Ground - Hobby - Steel.

Square Shaft

TopHide Pictures

Shafting - Linear - Square
Shafting - Linear - Square

Search Rating: 44%


Shafting Aluminium

TopHide Pictures

Shafting - Aluminium
Shafting - Aluminium

Search Rating: 44%

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Search Rating: 44%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Search Rating: 44%

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:

Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Search Rating: 44%

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Search Rating: 44%

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.


Shafting General Purpose

TopHide Pictures

Shafting - Carbon Steel - Keyed
Shafting - Carbon Steel - Keyed

Search Rating: 44%

Also see combined categories:
All Shafting
All Steel Shafting

Keyways are cut full length of each bar. Low carbon steel C1018. Good case hardening properties.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00. Unhardened carbon steel. Special order may be available for stainless steel, other diameters, other lengths. Please ask.


Shafting - Unground - Silver Steel
Shafting - Unground - Silver Steel

Search Rating: 44%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Related Information:

Shafting Precision Ground

TopHide Pictures

Shafting - Ground - Precision - Chrome Plated
Shafting - Ground - Precision - Chrome Plated

Search Rating: 44%

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Hardened and recommended for use with precision bearings. Ends are not plated.


Shafting - Ground - Precision - High Carbon Steel
Shafting - Ground - Precision - High Carbon Steel

Search Rating: 44%

Also see combined categories:
All Shafting
All Steel Shafting

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Stainless 303 Grade
Shafting - Ground - Precision - Stainless 303 Grade

Search Rating: 44%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting.

Related Information:

Shafting - Ground - Precision - Stainless 316 Grade
Shafting - Ground - Precision - Stainless 316 Grade

Search Rating: 44%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting.

Related Information:

Shafting - Ground - Precision - Stainless 416 Grade Hardened
Shafting - Ground - Precision - Stainless 416 Grade Hardened

Search Rating: 44%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Stainless 420 Grade Hardened
Shafting - Ground - Precision - Stainless 420 Grade Hardened

Search Rating: 44%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Stainless 440C Grade Hardened
Shafting - Ground - Precision - Stainless 440C Grade Hardened

Search Rating: 44%

Also see combined categories:
All Shafting
All Stainless Shafting

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.

Related Information:

Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1
Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1

Search Rating: 44%

Also see combined categories:
All Shafting
All Titanium Shafting

CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.

Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance.

Related Information:

Shafting - Ground - Precision - Titanium - Ti-Gr5-TC4
Shafting - Ground - Precision - Titanium - Ti-Gr5-TC4

Search Rating: 44%

Also see combined categories:
All Shafting
All Titanium Shafting

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:

Shafting - Pre Drilled and Tapped - High Carbon Steel
Shafting - Pre Drilled and Tapped - High Carbon Steel

Search Rating: 44%

Also see combined categories:
All Shafting
All Steel Shafting

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.


Shafting - Pre Drilled and Tapped - Stainless Steel Steel
Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Search Rating: 44%

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings


Shafts - Idler
Shafts - Idler

Search Rating: 43%

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Related Information:

Shafts - Pinion
Shafts - Pinion

Search Rating: 43%


Shafting General Purpose

TopHide Pictures

Rod - Drill Blanks
Rod - Drill Blanks

Search Rating: 43%

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Rod - Drill - General
Rod - Drill - General

Search Rating: 43%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.

Related Information:

Shafts - Flexible - Panel Mount - Cased
Shafts - Flexible - Panel Mount - Cased

Search Rating: 43%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Shafts - Flexible - Panel Mount - Open
Shafts - Flexible - Panel Mount - Open

Search Rating: 43%

Also see combined categories:
All Flexible Panel Mount Shaft

See PDF file at bottom of internet page for Performance Data.

Related Information:

Shafting Precision Ground

TopHide Pictures

Rail Supports - Without Shaft
Rail Supports - Without Shaft

Search Rating: 43%

Also see combined categories:
All Shaft Supports

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Related Information:

Rail Supports - With Shaft
Rail Supports - With Shaft

Search Rating: 43%

Also see combined categories:
All Shaft Supports

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Related Information:

Supports - Pedestal Two Bolt
Supports - Pedestal Two Bolt

Search Rating: 43%

Also see combined categories:
All Supports

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Related Information:

Clutches

TopHide Pictures

Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Search Rating: 42%

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:

Shafting Precision Ground

TopHide Pictures

Rail Supports - With Shaft - One Piece
Rail Supports - With Shaft - One Piece

Search Rating: 42%

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Related Information:

Locking Bushings

TopHide Pictures

Bushings - Integral Taper
Bushings - Integral Taper

Search Rating: 42%

Also see combined categories:
All Locking Assemblies
All Locking Bushings

Stainless Steel Taper Bushings.

Will not mar shafts.


Shafting General Purpose

TopHide Pictures

Rod - Drill - A-2 Air Hardening
Rod - Drill - A-2 Air Hardening

Search Rating: 42%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - O-1 Oil Hardening
Rod - Drill - O-1 Oil Hardening

Search Rating: 42%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - Oil Hardening - 480 Series
Rod - Drill - Oil Hardening - 480 Series

Search Rating: 42%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - S-7 Air Hardening
Rod - Drill - S-7 Air Hardening

Search Rating: 42%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Rod - Drill - W-1 Water Hardening
Rod - Drill - W-1 Water Hardening

Search Rating: 42%

Also see combined categories:
All Metal Bar - Silver Steel and Drill Rod
All Drill Rod

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.


Flexible Shaft

TopHide Pictures

Shafts - Flexible - Coupling Ends - Open - Mild Steel
Shafts - Flexible - Coupling Ends - Open - Mild Steel

Search Rating: 42%

Also see combined categories:
All Coupling End Flexible Shaft

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Related Information:

Splined Shafts and Bushes

TopHide Pictures

Splined Shafts - Stainless Steel
Splined Shafts - Stainless Steel

Search Rating: 42%

Also see combined categories:
All Splined Shafts

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Related Information:

Gears Metric Stem

TopHide Pictures

Gears - Spur - Module 0.5 - Stem - Brass
Gears - Spur - Module 0.5 - Stem - Brass

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.75 - Stem - Brass
Gears - Spur - Module 0.75 - Stem - Brass

Search Rating: 41%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Stem - Steel
Gears - Spur - Module 0.5 - Stem - Steel

Search Rating: 40%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Stem - Steel
Gears - Spur - Module 0.8 - Stem - Steel

Search Rating: 40%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1.5 - Stem - Steel
Gears - Spur - Module 1.5 - Stem - Steel

Search Rating: 40%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Stem - Steel
Gears - Spur - Module 1 - Stem - Steel

Search Rating: 40%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 2.5 - Stem - Steel
Gears - Spur - Module 2.5 - Stem - Steel

Search Rating: 40%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 2 - Stem - Steel
Gears - Spur - Module 2 - Stem - Steel

Search Rating: 40%

Also see combined categories:
All Metric Spur Gears
All Metric Stem Gears

Gears with integral shafts. Carbon steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Linear Bearings with Housing

TopHide Pictures

Housings - Linear - Square
Housings - Linear - Square

Search Rating: 38%

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.


Collars

TopHide Pictures




Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel
Collars - Shaft - Clamp Type - Two Piece - 300 Grade Stainless Steel

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars
All Two Piece Clamp Type Shaft Collars

Includes 303 and 304 Grade Stainless

Related Information:



Collars - Shaft - Gripfast - 304 Stainless Steel
Collars - Shaft - Gripfast - 304 Stainless Steel

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Related Information:

Collars - Shaft - Gripfast - ABS Plastic
Collars - Shaft - Gripfast - ABS Plastic

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Related Information:


Collars - Shaft - Hex Bore - One Piece - Steel
Collars - Shaft - Hex Bore - One Piece - Steel

Search Rating: 37%

Also see combined categories:
All Hex Bore Shaft Collars



Collars - Shaft - Hex Bore - Two Piece - Steel
Collars - Shaft - Hex Bore - Two Piece - Steel

Search Rating: 37%

Also see combined categories:
All Hex Bore Shaft Collars


Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Collars - Shaft - Hinged - Steel
Collars - Shaft - Hinged - Steel

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:

Collars - Shaft - Standard - Nylon
Collars - Shaft - Standard - Nylon

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Standard one piece nylon shaft collar with set screw

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Collars - Shaft - Standard - Steel
Collars - Shaft - Standard - Steel

Search Rating: 37%

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:

Bungs

TopHide Pictures

Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round

Search Rating: 37%

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:

Linear Bearings

TopHide Pictures

Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Search Rating: 36%

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Related Information:

Collars

TopHide Pictures

Collars - Threaded - Clamp Type - Steel
Collars - Threaded - Clamp Type - Steel

Search Rating: 35%

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Collars - Threaded - Clamp Type - Stainless Steel
Collars - Threaded - Clamp Type - Stainless Steel

Search Rating: 35%

Also see combined categories:
All Threaded Shaft Collars

Offer full radial holding power without marring the shaft.


Bearings Mounted

TopHide Pictures

Bearings - SDP - PTFE Filled Acetal - Flange Mounted
Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Search Rating: 32%

Also see combined categories:
All Press In Bearings

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124306 products in 3086 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.