Categories that include the terms: CARBON and STEEL
|
Actuator Boxes |  |
Actuator Box - Rack and Pinion - Size 6
Precision low backlash actuator boxes.
Case: AA15 Red Anodised Aluminum (6082-T6). Rack & Pinion: High Carbon Steel 817M40 (EN24). Backlash: 2°. Travel: 10mm travel = 191° pinion rotation on input : 1mm travel = 19.10° pinion rotation on input. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Actuator Box - Rack and Pinion - Size 8
Precision low backlash actuator boxes.
Case: AA15 Red Anodised Aluminum (6082-T6). Rack & Pinion: High Carbon Steel 817M40 (EN24). Backlash: 2°. Travel: 15mm travel = 238.8° pinion rotation on input : 1mm travel = 15.92° pinion rotation on input. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Actuator Box - Rack and Pinion - Size 12
Precision low backlash actuator boxes.
Case: AA15 Red Anodised Aluminum (6082-T6). Rack & Pinion: High Carbon Steel 817M40 (EN24). Backlash: 2°. Travel: 20mm travel = 238.7° pinion rotation on input : 1mm travel = 11.93° pinion rotation on input. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Actuator Box - Rack and Pinion - Size 16
Precision low backlash actuator boxes.
Case: AA15 Red Anodised Aluminum (6082-T6). Rack & Pinion: High Carbon Steel 817M40 (EN24). Backlash: 2°. Travel: 25mm travel = 204.8° pinion rotation on input : 1mm travel = 8.19° pinion rotation on input. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Actuator Box - Rack and Pinion - Size 20
Precision low backlash actuator boxes.
Case: AA15 Red Anodised Aluminum (6082-T6). Rack & Pinion: High Carbon Steel 817M40 (EN24). Backlash: 2°. Travel: 30mm travel = 196.5° pinion rotation on input : 1mm travel = 6.55° pinion rotation on input. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Ball Transfer Units | |
Ball Transfer Units - Spring Loaded
For conveying materials. From miniature to large.
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
|
Balls | |
Balls - Stainless Steel - 316L Grade
Easier to machine than standard 316 grade.
316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.
|
Bar - Hexagonal | |
Bar - Hexagonal - Carbon Steel
Saw Cut Ends. Small A/F sizes may not be perfectly straight.
|
Bar - Square | |
Bar - Square - Carbon Steel
Saw Cut Ends. Smaller sizes may not be supplied straight.
|
Bearings - One Way - Sprag | |
Bearings - One Way - Sprag - BR
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - One Way - Sprag - Standard
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes. Designed for press fit installation.
|
Bearings - One Way - Sprag - TFS
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - One Way - Sprag - TSS
Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.
High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.
|
Bearings - Press | |
Bearings - Press - Acetal - Flange Mounted
Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 Deg C. Self lubricating. Use any shaft material with 0.4 um or finer finish.
|
Bearings - Press - Needle Roller - Flange Mounted
Fitted with drawn cup needle bearing. -30 to 110 Deg C. Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer.
|
Bearings - Press - Sintered Bronze - Flange Mounted
Porous sintered bronze bearing. -28 to 95 Deg C. Retainer : Carbon Steel / Zinc Plated or Oxycote® Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.
|
Bearings - Thrust | |
Bearings - Thrust - Ball - Washers Only
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.
|
Belleville Spring Washers | |
Washers - Disc Spring - Steel
Includes Carbon Steel and Stainless Steel
|
Bushings - Stroke Rotary | |
Bushings - Stroke Rotary - Sealed
Stroke Rotary Bushing series can operate in both linear and rotary directions at the same time.
Material: Carbon Steel. The fit of Stroke Rotary Bushing with shaft and housing is recommend as shown in Table 1 of the diagram. Actual Stroke Length should be less than 80% of max. stroke. Mating Shafts should be HRC58-64. Surface roughness 0.85 or better. Oil holes provided for lubrication.
|
Button Dies | |
Tools - Dies
Tungsten Chrome Alloy - Carbon Steel. Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
|
Cam Followers - Roller Type | |
Cam Followers - Roller Type - Eccentric Stud
Carbon steel roller type cam followers with eccentric stud.
Carbon Steel - Synthetic rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.
|
Cam Followers - Roller Type - Miniature - Standard
Small carbon steel roller type cam followers.
Carbon Steel - Nitrile Rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.
|
Cam Followers - Roller Type - Miniature - Thrust Disc
Small carbon steel thrust disc roller type cam followers.
CFS.. W: High Carbon Steel (all parts). CFS.. FW: Stainless Steel - hard, similar to 440C (all parts). Stud designed to fit H7 housing.
|
Cam Followers - Roller Type - Standard
Carbon steel roller type cam followers.
Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing.
|
Cam Followers - Roller Type - Thrust Disc
Carbon steel thrust disc roller type cam followers.
CF..WBR, CF..WBUUR: High Carbon Steel. CF..FWBR, CF..FWBUUR: Stainless Steel. Seals: Synthetic Rubber. Stud designed to fit H7 housing.
|
Carbon Spring Steel | |
Washers - Flat - Carbon Spring Steel - Precision
Flat Carbon Spring Steel Washers.
|
Washers - Spring
Wave Washers - All Materials.
|
Clamps - Gear | |
Clamps - Gear - Screw Type
Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.
Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.
|
Clamps - Gear - Split
Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.
Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.
|
Clamps - Gear - Two Piece - Commercial Balanced
Commercial - Stainless - Aluminium - Carbon Steel - For our clamp type gears.
Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. These clamps are designed to clamp the OD of the hub on our clamp type gears. The shaft size listed is for reference only.
|
Clamps - Gear - Two Piece - Precision Balanced
Precision - Stainless - Aluminium - Carbon Steel - For our clamp type gears.
Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. These clamps are designed to clamp the OD of the hub on our clamp type gears. The shaft size listed is for reference only.
|
Collars - Shaft | |
Collars - Shaft - Standard
Includes miniature precision types. Carbon steel, 303 and 316 stainless.
|
Cutting and Threading | |
Tools - Taps
High Speed Steel Short Machine and Carbon Steel Straight Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
|
Fasteners - Pins | |
Pins - Roll - Plain
Plain carbon spring steel DIN1481.
|
Gear Stock - Spur | |
Gears - Pinion Wire - 24 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 32 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 44 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 48 Pitch
Brass and carbon steel.
|
Gears - Pinion Wire - 64 Pitch
Brass and carbon steel.
|
Gearboxes - Cross Axis | |
Gearboxes - Cross Axis - 47.0 x 40.0 x 22.0mm
Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 70.0 x 60.0 x 28.0mm
Worm and Wormwheel box. 2.5 to 8.8Nm. 5:1 to 120:1 ratios. P30 and PF30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 90.0 x 75.0 x 32.0mm
Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 110.0 x 95.0 x 38.0mm
Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 130.0 x 110.0 x 46.0mm
Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 150.0 x 125.0 x 54.0mm
Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Cross Axis - 170.0 x 145.0 x 60.0mm
Worm and Wormwheel box. 38.0 to 164.0Nm. 5:1 to 120:1 ratios. P70 and PF70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.
|
Gearboxes - Inline | |
Gearboxes - Inline - 50 x 30mm
J51 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: J51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 40mm
J52 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 50 x 40mm Hi Torque
JHD51 Series.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 50mm
J65 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 63 x 60mm
J66 Series.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.
|
Gearboxes - Inline - 112.0 x 52.0 Low Backlash
Taper Gears - Weight: 1.50kg. TG112 Series.
Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: <= 8 arc/min at output. Max Input Speed: 3000 Rpm.
|
Gearboxes - Offset | |
Gearboxes - Offset - 58 x 46 x 24
FF10 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.226kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 80 x 64 x 32
FF15 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 0.55kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 117 x 100 x 48
FF20 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight: 1.9kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 175 x 150 x 60
FF30 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 5.5kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 236 x 190 x 90
FF40 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Offset - 310 x 240 x 100
FF50 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 26.3kg. Backlash: 1°. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.
|
Gearboxes - Right Angle | |
Gearboxes - Right Angle - 87.0 x 66.0 x 60.0mm
1 : 1 ratio only. BL18 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV. Weight: 1.3kg.
|
Gearboxes - Tee | |
Gearboxes - Tee - 65.0 x 50.0 x 50.0mm
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 70.0 x 70.0mm
Lengths from 90 to 120mm. BL15 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 75.0 x 50.0 x 50.0mm
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearboxes - Tee - 80.0 x 60.0 x 50.0mm
BL8 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1°. Lubrication: Greased for life - Shell Nerita Grease HV.
|
Gearheads - Inline | |
Gearheads - Inline - 50 x 30mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: J51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 50 x 40mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 50 x 40mm Hi Torque
Drilled and Tapped to suit your motor register.
Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3° - 6°. Approx Motion: JHD51-10 = 2°30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 63 x 50mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gearheads - Inline - 63 x 60mm
Drilled and Tapped to suit your motor register.
End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.
|
Gears - Mitre - US Sizes | |
Gears - Mitre - 24 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass and carbon steel.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - 32 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass and carbon steel.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - 48 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass, carbon steel and acetal.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Pinion | |
Gears - Spur - 24 Pitch - 14.5 Degree
PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5 Degree Pressure Angle. Nylon, brass and carbon steel.
|
Gears - Spur - 32 Pitch - 14.5 Degree
PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon.
|
Gears - Spur - 32 Pitch - 20.0 Degree
PCD = No. of Teeth x 0.794mm (1/32 in.). 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, acetal, bakelite, brass, carbon steel and nylon.
|
Gears - Spur - 48 Pitch - 14.5 Degree
PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5 Degree Pressure Angle. 5052 aluminium, brass, carbon steel and nylon.
|
Gears - Spur - Module 0.25
PCD = No. of Teeth x 0.250mm. 20 Degree Pressure Angle. Brass and carbon steel.
|
Gears - Spur - Module 0.40
PCD = No. of Teeth x 0.400mm. 20 Degree Pressure Angle. 416 stainless steel, acetal, brass and carbon steel.
|
Gears - Spur - Module 0.50
PCD = No. of Teeth x 0.500mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 0.60
PCD = No. of Teeth x 0.600mm. 20 Degree Pressure Angle. Carbon steel.
|
Gears - Spur - Module 0.80
PCD = No. of Teeth x 0.800mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 1.00
PCD = No. of Teeth x 1.000mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 1.50
PCD = No. of Teeth x 1.500mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.
|
Gears - Spur - Module 2.00
PCD = No. of Teeth x 2.000mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.
|
Gears - Spur - Module 2.50
PCD = No. of Teeth x 2.500mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon.
|
Gears - Spur - Module 3.00
PCD = No. of Teeth x 3.000mm. 20 Degree Pressure Angle. 303 stainless steel, carbon steel and nylon.
|
Gears - Racks - Metric Sizes | |
Gears - Racks - Module 0.40
20 Degree Pressure Angle. Brass, carbon steel and nylon.
Plastic and metallic.
|
Gears - Racks - Module 0.50
20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 0.80
20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 1.00
20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 1.50
20 Degree Pressure Angle. Carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 2.00
20 Degree Pressure Angle. Carbon steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 2.50
20 Degree Pressure Angle. Carbon steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 3.00
20 Degree Pressure Angle. Carbon steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - US Sizes - 14.5 Degree Pressure Angle | |
Gears - Racks - 24 Pitch - 14.5 Degree
14.5 Degree Pressure Angle. Brass, carbon steel and nylon.
Plastic and metallic.
|
Gears - Racks - 32 Pitch - 14.5 Degree
14.5 Degree Pressure Angle. Brass, carbon steel and nylon.
Plastic and metallic.
|
Gears - Racks - 48 Pitch - 14.5 Degree
14.5 Degree Pressure Angle. Brass, carbon steel and nylon.
Plastic and metallic.
|
Hobby Tools | |
Hobby Tools - Taps
A small selection of popular sizes.
See main listings for sizes not shown here. Carbon Steel (CS) Hand taps.
|
Housings - Linear with Bearings | |
Housings - Linear - Pillow Block
Includes Bearings.
Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball Bushing™ Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).
|
Housings - Linear - Twin Pillow Block
Includes Bearings.
Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball Bushing™ Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).
|
Leadscrews and Nuts | |
Leadscrew Nuts - Trapezoidal - Hexagonal - Metallic
Use with trapezoidal leadscrews listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
|
Leadscrew Nuts - Trapezoidal - Round - Metallic
Use with trapezoidal leadscrews listed in separate category.
Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.
|
Leadscrew Nuts - Trapezoidal - Square - Metallic
Use with trapezoidal leadscrews listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
|
Leadscrews - Trapezoidal - Rolled
Use with trapezoidal nuts listed in separate category.
Carbon Steel C35E or Stainless steel 316L. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.
|
Levers | |
Levers - Clamp - Quick Release
Handles: Die-cast zinc or plastic. Internal thread: mechanism made from carbon steel. The thru-hole clamping lever allows for quick clamping on long thread lengths.
|
Locknuts | |
Locknuts
Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269.
|
Mounts - Uniload | |
Mounts - Uniload - CNF - Heavy Duty
Constant Natural Frequency Mounts - Stiffness is proportional to load.
Colour: Black. Carbon Steel Zinc Plated Screw. Corrosion resistant. Request a Uniload Catalogue by e-mail from our Contacts page.
|
Mounts - Uniload - CNF - Medium Duty
Constant Natural Frequency Mounts.
Carbon Steel Zinc Plated Screw. Corrosion resistant. Request a Uniload Catalogue by e-mail from our Contacts page.
|
Nuts - Disk Locking | |
Nuts - Disk Locking
Body: Medium Carbon Steel (1035/45) HRC 26-34. Plating: Zinc ASTM B - 633. Free Spinning (no thread interference) (H6 Tolerance) - One piece assembly - No washer required. Installed with standard equipment, no special tools required - Easy to remove - Reusable. Can be used with Grade 5 (Class 8.8), Grade 8 (Class 10.9) and even stronger bolted.
|
Nuts - Quick Release | |
Nuts - Quick Release
Carbon steel, black oxide finish. Button Thread® nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.
|
Pins - Hammer Drive | |
Pins - Hammer Drive
Used to replace screws where the need to remove the pin is unlikely.
Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
|
PTFE Lined Rod Ends | |
Rod Ends - Steel - PTFE Lined
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon steel and Stainless Steel.
|
Rod Ends | |
Rod Ends - Steel - Bronze Lined
Imperial and Metric / Carbon steel and Stainless Steel.
Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.
|
Snap Rings | |
Snaprings - External - Basic
Includes series M3200 / SP / ESP / M2400 / SW.
Carbon sping steel. Used to secure bearings.
|
Washers - Lock | |
Washers - Lock - Tabbed - Heavy Duty
Heavy duty WH / TW Series for bearing locknuts.
Carbon spring steel. Use with NH series locknuts.
|
Washers - Lock - Tabbed - MB Series
Standard MB series lockwasher for use with bearing locknuts.
Carbon spring steel. Use with N/AN and NL series locknuts.
|
Washers - Lock - Tabbed - W Series
Standard W/WS series lockwasher for use with bearing locknuts.
Carbon spring steel. Use with N/AN and NL series locknuts.
|
|
