Bungs Square Threaded Categories


Category Matches

Bungs

TopHide Pictures

Bungs - Square - Threaded
Bungs - Square - Threaded

Search Rating: 100%

Square tubing end inserts with a thread


Bungs - Square
Bungs - Square

Search Rating: 95%

Plastic bungs fit inside square tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Related Information:

Sleeves

TopHide Pictures

Sleeves - Square Hole - Threaded - Carbon Steel
Sleeves - Square Hole - Threaded - Carbon Steel

Search Rating: 61%

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


Linear Bearings with Housing

TopHide Pictures

Housings - Linear - Square
Housings - Linear - Square

Search Rating: 60%

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.


Screws Square Head

TopHide Pictures

Screws - Set - Cup Point - Square Head
Screws - Set - Cup Point - Square Head

Search Rating: 60%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws - Set - Dog Point - Square Head
Screws - Set - Dog Point - Square Head

Search Rating: 60%

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Leadscrews

TopHide Pictures

Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Search Rating: 58%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:

Bar and Rod

TopHide Pictures

Square Bar - Brass
Square Bar - Brass

Search Rating: 57%

Also see combined categories:
All Metal Bar - Square

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.


Square Bar - Urethane
Square Bar - Urethane

Search Rating: 57%

Also see combined categories:
All Non Metallic Bar - Square

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.


Bearings Grooved Profile

TopHide Pictures

Bearings - Square Groove Profile OD
Bearings - Square Groove Profile OD

Search Rating: 57%

Special bearings. Not readily available.


Nuts Specialty

TopHide Pictures

Nuts - Square - Machine Screw
Nuts - Square - Machine Screw

Search Rating: 57%

For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards


Sleeves

TopHide Pictures

Sleeves - Square Hole - Plain - Carbon Steel
Sleeves - Square Hole - Plain - Carbon Steel

Search Rating: 57%

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Sleeves - Square Hole - Plain - Hardened
Sleeves - Square Hole - Plain - Hardened

Search Rating: 57%

Also see combined categories:
All Square Hole Sleeves

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Washers Square

TopHide Pictures

Washers - Square - Heavy Duty - 304 Stainless Steel
Washers - Square - Heavy Duty - 304 Stainless Steel

Search Rating: 57%

Also see combined categories:
All Square Washers


Washers - Square - Heavy Duty - Steel
Washers - Square - Heavy Duty - Steel

Search Rating: 57%

Also see combined categories:
All Square Washers


Tube and Tubing

TopHide Pictures

Tube - Square - Aluminium
Tube - Square - Aluminium

Search Rating: 57%

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Tube - Square - Brass
Tube - Square - Brass

Search Rating: 57%

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:

Tube - Square - Carbon Fibre - Round Hole
Tube - Square - Carbon Fibre - Round Hole

Search Rating: 57%

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Tube - Square - Carbon Fibre - Square Hole
Tube - Square - Carbon Fibre - Square Hole

Search Rating: 57%

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Bumpers

TopHide Pictures

Bumpers - Square and Rectangle
Bumpers - Square and Rectangle

Search Rating: 57%

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene only, no steel plate.


Bumpers - Square and Rectangle - Steel Plated - Neoprene
Bumpers - Square and Rectangle - Steel Plated - Neoprene

Search Rating: 57%

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.


Bumpers - Square and Rectangle - Steel Plated - Urethane
Bumpers - Square and Rectangle - Steel Plated - Urethane

Search Rating: 57%

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Urethane bonded to steel plate.


Housings for Ball Bearings

TopHide Pictures

Housings - Bearing - Square - Miniature
Housings - Bearing - Square - Miniature

Search Rating: 56%

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.


Linear Bearing Housings

TopHide Pictures

Housings - Linear - Square - Clamps
Housings - Linear - Square - Clamps

Search Rating: 56%

Also see combined categories:
All Linear Bearing Housings


Square Shaft

TopHide Pictures

Shafting - Linear - Square
Shafting - Linear - Square

Search Rating: 56%


Balsa Wood

TopHide Pictures

Balsa Wood - Square
Balsa Wood - Square

Search Rating: 56%

Square section in longer lengths 900mm plus. See block for short lengths. Delivery Surcharges May Apply on Selected Items

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Related Information:

If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Balsa Wood - Square.

Keys and Keysteel

TopHide Pictures

Keysteel Lengths - Square - Brass
Keysteel Lengths - Square - Brass

Search Rating: 56%

Also see combined categories:
All Keysteel Lengths

Brass key steel


Keysteel Lengths - Square - Carbon Steel
Keysteel Lengths - Square - Carbon Steel

Search Rating: 56%

Also see combined categories:
All Keysteel Lengths

Plain carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Keysteel Lengths - Square - Stainless Steel
Keysteel Lengths - Square - Stainless Steel

Search Rating: 56%

Also see combined categories:
All Keysteel Lengths

303, 304 and 316 grade key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.


Keysteel Lengths - Square - Zinc Plated
Keysteel Lengths - Square - Zinc Plated

Search Rating: 56%

Also see combined categories:
All Keysteel Lengths

Zinc plated carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.


Mounts Cylindrical

TopHide Pictures

Mounts - Cylindrical - Square
Mounts - Cylindrical - Square

Search Rating: 56%

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.


Bearings and Housings Insert

TopHide Pictures

Housings - Bearing - Flanged - Square - Cast Iron
Housings - Bearing - Flanged - Square - Cast Iron

Search Rating: 56%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:

Housings with Bearing

TopHide Pictures

Housings - Bearing - Flanged - Square - W300
Housings - Bearing - Flanged - Square - W300

Search Rating: 56%

Also see combined categories:
All Housings with Integral Bearing

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.


Suspension Units

TopHide Pictures

Suspension Units - Rubber - Square - Insert Type
Suspension Units - Rubber - Square - Insert Type

Search Rating: 56%

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Screws Security

TopHide Pictures

Screws - Security - Post Combi Square - Pan Head - Super Zinc
Screws - Security - Post Combi Square - Pan Head - Super Zinc

Search Rating: 55%

Also see combined categories:
All Security Screws

Each 200 pack comes with a Post Combination Driver Bit. Metric only.

Use special tool listed under Screws - Securty - Socket - Tools.

Related Information:

Screws - Security - Post Combi Square - Tools
Screws - Security - Post Combi Square - Tools

Search Rating: 55%

Also see combined categories:
All Security Screw Tools

Metric only.

Used for two hole security screws.

Related Information:

Pins Wirelock

TopHide Pictures

Pins - Wire Lock Lynch - Double Wire - Square - 304 Stainless Steel
Pins - Wire Lock Lynch - Double Wire - Square - 304 Stainless Steel

Search Rating: 55%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel
Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Search Rating: 55%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel
Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Search Rating: 55%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Balsa Wood

TopHide Pictures

Balsa Wood - Block
Balsa Wood - Block

Search Rating: 54%

Rectangular and square section short lengths. Delivery Surcharges May Apply on Selected Items

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Balsa Wood - Block.

Latches Other

TopHide Pictures

Handles - Tee
Handles - Tee

Search Rating: 53%

Zinc plated steel 7.94mm (5/16in.) square shank.


Latches - Toolbox
Latches - Toolbox

Search Rating: 53%

Zinc finished steel accepts 7.94mm (5/16in.) square shank.


Linear Slides

TopHide Pictures

Linear Slide Assemblies - Plain - Low Profile - High Load
Linear Slide Assemblies - Plain - Low Profile - High Load

Search Rating: 52%

Also see combined categories:
All Linear Slide Assemblies

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.


Latches Handle

TopHide Pictures

Handles - Latching - Cab Locks
Handles - Latching - Cab Locks

Search Rating: 52%

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.


Handles - Latching - Padlocking
Handles - Latching - Padlocking

Search Rating: 52%

Zinc finished iron/steel construction. Has 5/16in. Square shank.


Keys and Keysteel

TopHide Pictures

Keys - Machine - Carbon Steel
Keys - Machine - Carbon Steel

Search Rating: 52%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Keys - Machine - Stainless Steel
Keys - Machine - Stainless Steel

Search Rating: 52%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Latches Handle

TopHide Pictures

Handles - Latching - T-Handle - Folding
Handles - Latching - T-Handle - Folding

Search Rating: 51%

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.


Handles - Latching - 2-Point Locking Rod Kit
Handles - Latching - 2-Point Locking Rod Kit

Search Rating: 50%

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Springs Die

TopHide Pictures

Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Search Rating: 49%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.


Springs - Die - Imperial - Medium Duty
Springs - Die - Imperial - Medium Duty

Search Rating: 49%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.


Springs - Die - Imperial - Extra Heavy Duty
Springs - Die - Imperial - Extra Heavy Duty

Search Rating: 49%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.


Springs - Die - Imperial - Medium-Heavy Duty
Springs - Die - Imperial - Medium-Heavy Duty

Search Rating: 49%

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.


Cranks and Handwheels

TopHide Pictures

Cranks - Handwheel - Spoked
Cranks - Handwheel - Spoked

Search Rating: 46%

Also see combined categories:
All Spoked Handwheel Cranks

Pressed steel with RAL 9005 black epoxy resin coating. Hub: Welded with H9 tolerance plain hole (Type B) or through square H11 tolerance hole (Type V). Axial and radial runout lower than IT 12.


Games General

TopHide Pictures

Games - Mind Challenge
Games - Mind Challenge

Search Rating: 45%

Also see combined categories:
All Games and Gadgets

Strategy and skill games - great gift ideas

Great games of strategy and skill including KogWorkS. Mind Challenge Classic - Pyramid, Link, Ladies, Why, Sanity, Ei8ht, Tease, Square Off and Integr8. Challenging games to enhance memory, creativity and logical deductive reasoning. Simple rules. Easy to learn. Hours of fun.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Games - Mind Challenge.


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 124116 products in 3089 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.