Belts Timing 40dp Lt Pitch Categories (Stocked Items Only)
Category Matches
Belts Timing 40DP LT Pitch
TopHide PicturesBelts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide

Search Rating: 90%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide

Search Rating: 90%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide

Search Rating: 90%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide

Search Rating: 90%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts
Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.
Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Pulleys Timing 40DP LT Pitch
TopHide PicturesPulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain

Search Rating: 74%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.
Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore

Search Rating: 74%
Also see combined categories:
All 40DP 2.073mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.
Aluminium Alloy. Finished Through Bore Ready To Assemble.
Belts Timing AT5 5mm
TopHide PicturesBelts - Timing - 5.000mm Pitch - AT5 - 10mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Belts Timing GT2 2mm
TopHide PicturesBelts - Timing - 2.000mm Pitch - GT2 - 3mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT2 - 4mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. For easy ready selected sets of timing belts and pulleys please see the HES website.
Belts - Timing - 2.000mm Pitch - GT2 - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT2 - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT2 - Clean - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 2mm Pitch Timing Belts
PowerGrip(R) TruMotion(R) Timing Belts in 2.000mm.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Pitch (P) - 2.00mm, Tooth Height (H) - 0.76mm, Belt Height (W) - 1.52mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts Timing GT2 3mm
TopHide PicturesBelts - Timing - 3.000mm Pitch - GT2 - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - GT2 - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - GT2 - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts Timing GT2 5mm
TopHide PicturesBelts - Timing - 5.000mm Pitch - GT2 - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - GT2 - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
GT2 Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts Timing HTD 3mm
TopHide PicturesBelts - Timing - 3.000mm Pitch - HTD - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 3mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.
Belts Timing HTD 5mm
TopHide PicturesBelts - Timing - 5.000mm Pitch - HTD - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - HTD - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.
If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide.
Belts - Timing - 5.000mm Pitch - HTD Double Sided - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
HTD Series Metric Timing Belts Double Sided.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.
Belts Timing L Pitch 9.53mm
TopHide PicturesBelts - Timing - 9.525mm Pitch - L - 12.7mm Wide

Search Rating: 50%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts - Timing - 9.525mm Pitch - L - 19.1mm Wide

Search Rating: 50%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts - Timing - 9.525mm Pitch - L - 25.4mm Wide

Search Rating: 50%
Also see combined categories:
All L 9.525mm Pitch Timing Belts
Standard Series Timing Belts 9.525mm or 0.375 inch pitch.
Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.
Belts Timing MXL Pitch
TopHide PicturesBelts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 4.8mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 4.76mm (3/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 6.4mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 6.35mm (1/4 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 7.9mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 7.93mm (5/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 9.53mm (3/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs comliant.
Belts - Timing - 2.032mm Pitch - MXL - Clean - 4.8mm Wide

Search Rating: 50%
Also see combined categories:
All MXL 2.032mm Pitch Timing Belts
PowerGrip(R) TruMotion(R) Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm
The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.
Belts Timing T01 1mm
TopHide PicturesBelts - Timing - 1.000mm Pitch - T01M - 3mm Wide

Search Rating: 50%
Also see combined categories:
All 1mm Pitch Timing Belts
Miniature 1mm series timing belts. 3mm Wide +/- 0.2mm
Pitch (P) - 1.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Breaking strength is not indicative of working strength.
Belts Timing T10 10mm
TopHide PicturesBelts - Timing - 10.000mm Pitch - T10 - 10mm Wide

Search Rating: 50%
Also see combined categories:
All 10mm Pitch Timing Belts
T Series Metric Timing Belts.
Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.
Belts Timing T2.5 2.5mm
TopHide PicturesBelts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide

Search Rating: 50%
Also see combined categories:
All 2.5mm Pitch Timing Belts
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide

Search Rating: 50%
Also see combined categories:
All 2.5mm Pitch Timing Belts
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 2.5mm Pitch Timing Belts
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts Timing T5 5mm
TopHide PicturesBelts - Timing - 5.000mm Pitch - T5 - 10mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
T Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - T5 - 15mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
T Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.000mm Pitch - T5 - 6mm Wide

Search Rating: 50%
Also see combined categories:
All 5mm Pitch Timing Belts
T Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 2.65mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Belts Timing XL Pitch 5.08mm
TopHide PicturesBelts - Timing - 5.080mm Pitch - XL - 12.7mm Wide

Search Rating: 50%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch. 12mm or 12.7mm width.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.080mm Pitch - XL - 6.4mm Wide

Search Rating: 50%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide

Search Rating: 50%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Belts - Timing - 5.080mm Pitch - XL - 7.9mm Wide.
Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide

Search Rating: 50%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide

Search Rating: 50%
Also see combined categories:
All XL 5.08mm Pitch Timing Belts
Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.
Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.
Pulleys Timing AT5 5mm
TopHide PicturesPulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Pulleys Timing T01 1mm
TopHide PicturesPulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy. With set screw.
Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 1mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy. With set screw.
Pulleys Timing GT2 2mm
TopHide PicturesPulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium

Search Rating: 48%
Also see combined categories:
All 2mm Pitch Timing Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys Timing GT2 3mm
TopHide PicturesPulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys Timing H Pitch 12.7mm
TopHide PicturesPulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock

Search Rating: 48%
Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Taperlock bush required for bore.
Cast Iron and Steel. Match with a taperlock to suit your bore requirements.
Pulleys Timing HTD 3mm
TopHide PicturesPulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys Timing HTD 5mm
TopHide PicturesPulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys Timing L Pitch 9.53mm
TopHide PicturesPulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock

Search Rating: 48%
Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements.
Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Taperlock

Search Rating: 48%
Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Match with a taperlock to suit your bore requirements.
Pulleys Timing MXL Pitch
TopHide PicturesPulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
2.032mm metric is equivalent to 0.080 pitch imperial.
Pulleys Timing T10 10mm
TopHide PicturesPulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

Search Rating: 48%
Also see combined categories:
All 10mm Pitch Timing Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys Timing T2.5 2.5mm
TopHide PicturesPulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium

Search Rating: 48%
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Timing Belt Lengths
TopHide PicturesBelts - Timing - Lengths

Search Rating: 48%
Sold per meter - Refer diagrams in timing belt listings for aspects of various pitches.
Lengths of timing belt stock are used for reciprocating applications. Not meant to be joined.
Pulleys Timing GT2 2mm
TopHide PicturesPulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit GT 2mm Pitch Timing Belts.
Aluminium Alloy. Finished Bores with Set Screws.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock

Search Rating: 48%
Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.
Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Insert

Search Rating: 48%
Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Plain

Search Rating: 48%
Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. No locking device.
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.
Aluminium Alloy. Set Screw and EZI-LOK Hubs.
Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 2mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.
Aluminium Alloy. Set Screw Locking.
Pulleys Timing GT2 3mm
TopHide PicturesPulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.
Aluminium Alloy. Finished through bore ready to assemble.
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Insert

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Plain

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. No locking device.
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.
Finished through bore ready for assembly. Set screw locking.
Pulleys Timing GT2 5mm
TopHide PicturesPulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.
Pulleys Timing HTD 3mm
TopHide PicturesPulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Aluminium alloy. Finished through bore ready to assemble. Set screw locking.
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.
Suitable for use with shaftloc sleeves.
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.
Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Aluminium alloy. Finished through bore ready to assemble. Set screw locking.
Pulleys Timing HTD 5mm
TopHide PicturesPulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.
Aluminium Alloy. Finished bore with set screw locking.
Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. No locking device.
Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Pulleys Timing L Pitch 9.53mm
TopHide PicturesPulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Pulleys Timing MXL Pitch
TopHide PicturesPulleys - Timing - 2.032mm Pitch - MXL - 3.2mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 3.0 to 3.2mm wide.
2.032mm metric is equivalent to 0.080 pitch imperial.
Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - EZ-Lock

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
2.032mm metric is equivalent to 0.080 pitch imperial. Socket Cap Screw is Supplied with Pulley. Aluminium Alloy.
Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Insert

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With brass insert.
2.032mm metric is equivalent to 0.080 pitch imperial.
Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Plain

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. No locking device.
2.032mm metric is equivalent to 0.080 pitch imperial.
Pulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
2.032mm metric is equivalent to 0.080 pitch imperial.
Pulleys - Timing - 2.032mm Pitch - MXL - 9.5mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 9.5 to 9.6mm wide
2.032mm metric is equivalent to 0.080 pitch imperial. Aluminium Alloy. Finished Through Bore Ready To Assemble.
Pulleys Timing T5 5mm
TopHide PicturesPulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Pulleys Timing XL Pitch 5.08mm
TopHide PicturesPulleys - Timing - 5.080mm Pitch - XL - STOCK - Aluminium

Search Rating: 48%
Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys
All XL 5.08mm Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys Timing HTD 5mm
TopHide PicturesPulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Fairloc Hub

Search Rating: 48%
Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Fairloc locking hub.
Pulleys Timing MXL Pitch
TopHide PicturesPulleys - Timing - 2.032mm Pitch - MXL - 6.4mm Wide - Plastic - Metal Hub

Search Rating: 48%
Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Moulded single or double flange. With aluminium hub.
2.032mm metric is equivalent to 0.080 pitch imperial.
Pulleys Timing XL Pitch 5.08mm
TopHide PicturesPulleys - Timing - 5.080mm Pitch - XL - STOCK - Carbon Steel

Search Rating: 48%
Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys
All XL 5.08mm Pulley Stock
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Pulleys - Timing - 5.080mm Pitch - XL - 6.4mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Aluminium alloy. Finished bore with set screw locking.
Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Insert

Search Rating: 48%
Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.
Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore

Search Rating: 48%
Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.
Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Metal Hub

Search Rating: 48%
Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Metal Hub.
Easy Selection Kits
TopHide PicturesKits - Timing Belt and Pulley

Search Rating: 33%
Ready to go sets of timing gears and pulleys for when you just want something quickly
If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Kits - Timing Belt and Pulley.
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
TopTop