Belt - Small Parts Engineering Product Catalogue

Categories that include the term: BELT A Section V Belts          Belts - Vee - 12.5 x 9.0 mm - A/4L 12.5mm Top Width x 9.0mm Height. Belts - Vee - 12.7 x 10.0 mm - SPA 12.7mm Top Width x 10.0mm Height. Adhesives and Sealants          Adhesives and Sealants - General Molytec, Loctite, Pacer, Dow Corning, 3M. Includes silicone sealant, gasket adhesive, canopy glue, belt conditioner and electronic tak-pak. Some items in this category are marked as only available for collection. B Section V Belts          Belts - Vee - 16.3 x 13.0 mm - SPB 16.3mm Top Width x 13.0mm Height. Belts - Vee - 16.5 x 11.0 mm - B/5L 16.5mm Top Width x 11.0mm Height. Belt Tension Tester          Belt Tension Tester For testing the tension on assembled timing belts, vee belts, flat belts etc. Gauges for testing all types of belts when assembled for correct tension. Belts - Conidrive          Belts - Conidrive N10 Self Guided Belts - 10mm Pitch. -30 to +80 Degree Celsius. Low noise and vibration. No flanges needed on pulleys for guidance. Polyurethane Reinforced with Steel Tensile Cords. Belts - Conidrive N10 - Lengths Self Guided Belts - 10mm Pitch - Sold by the metre. -30 to +80 Degree Celsius. Self guiding system - no pulley flanges required. For metering, positioning and oscillating systems. Polyurethane Reinforced with Steel Tensile Cords. Orders for more than one metre will be supplied as a continuous length up to the max length shown. Belts - Flat          Belts - Flat Working Tension 2.3 to 27.5 N. Length Tolerance +/- 0.5%. Breaking Strength 1108 N. 1 Ply Polyester Woven Cord, Black Neoprene Coating. Maximum Belt Speed: 5000 mtrs / min (20000 feet / min). Belts - Posi-Drive          Belts - Posi-Drive - 2.50 mm Circular Pitch - Single Core Same as US 32 Pitch - Use with Posi-Drive Pulleys. Use Single Core with Posi-Drive Pulleys. 2.494mm Circular Pitch. Same as US 32 Pitch. Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core Same as US 0.1475 Pitch - Use with Posi-Drive Sprockets. Use Double Core with Posi-Drive Sprockets. 3.746mm Circular Pitch. Same as US 0.1475 Pitch. Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core Same as US 20 Pitch - Use with Posi-Drive Sprockets. Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core Same as US 20 Pitch - Use with Posi-Drive Pulleys. Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Belts - Posi-Drive - Pulleys to Suit          Pulleys - Posi-Drive - 2.50 mm Circular Pitch Same as US 32 Pitch - Use with Single Core Belts. Pulleys - Posi-Drive - 4.00 mm Circular Pitch Same as US 20 Pitch - Use with Single Core Belts. Belts - Posi-Drive - Sprockets to Suit          Sprockets - Posi-Drive - 3.75 mm Circular Pitch Same as US 0.1475 Pitch - Use with Double Core Belts. Sprockets - Posi-Drive - 4.00 mm Circular Pitch Same as US 20 Pitch - Use with Double Core Belts. Belts - Round          Belts - Rounthane Joinable belting. Belts - Rounthane - Connectors Joinable belting connectors. O-Rings - Nitrile Rubber General purpose. Belts - Timing - 2 mm GT          Belts - Timing - 2.000mm Pitch - GT - TRUE METRIC GT Series Metric Timing Belts. Pitch (P) - 2mm. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.52mm. TRUE METRIC is a trademark of Designatronics. Breaking strength is not indicative of working strength. Belts - Timing - 2.032 mm MXL          Belts - Timing - 2.032mm Pitch - MXL Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength. Belts - Timing - 2.032mm Pitch - MXL Double Sided Standard Series Timing Belts 2.032mm or 0.080 inch pitch - Double Sided. Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength. Belts - Timing - 2.073 mm 40DP          Belts - Timing - 2.073mm Pitch - 40DP Standard Series Timing Belts 2.072mm or 0.08016 inch pitch. Pitch (P) - 2.073mm (0.0816 inch). Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength. Belts - Timing - 2.5 mm T Section          Belts - Timing - 2.500mm Pitch - T2.5 T Series Metric Timing Belts. Pitch (P) - 2.500mm. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength. Belts - Timing - 3 mm GT          Belts - Timing - 3.000mm Pitch - GT - TRUE METRIC GT Series Metric Timing Belts. Pitch (P) - 3.000mm. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. TRUE METRIC is a trademark of Designatronics. Breaking strength is not indicative of working strength. Belts - Timing - 3 mm HTD          Belts - Timing - 3.000mm Pitch - HTD HTD Series Metric Timing Belts. Pitch (P) - 3.000mm. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength. Belts - Timing - 3.000mm Pitch - HTD Double Sided HTD Series Metric Timing Belts Double Sided. Pitch (P) - 3.000mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength. Belts - Timing - 5 mm GT          Belts - Timing - 5.000mm Pitch - GT - TRUE METRIC GT Series Metric Timing Belts. Pitch (P) - 5.000mm. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. TRUE METRIC is a trademark of Designatronics. Breaking strength is not indicative of working strength. Belts - Timing - 5 mm HTD          Belts - Timing - 5.000mm Pitch - HTD HTD Series Metric Timing Belts. Pitch (P) - 5.000mm. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength. Belts - Timing - 5.000mm Pitch - HTD Double Sided HTD Series Metric Timing Belts Double Sided. Pitch (P) - 5.000mm. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength. Belts - Timing - 5 mm T Section          Belts - Timing - 5.000mm Pitch - T5 T Series Metric Timing Belts. Pitch (P) - 5.000mm. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength. Belts - Timing - 5.000mm Pitch - T5 Double Sided T Series Metric Timing Belts. Pitch (P) - 5.000mm. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength. Belts - Timing - 5.080 mm (1/5 Inch) XL          Belts - Timing - 5.080mm Pitch - XL Standard Series Timing Belts 5.080mm or 0.200 inch pitch. Pitch (P) - 5.080mm (0.200 inch). Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength. Belts - Timing - 5.080mm Pitch - XL Double Sided Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided. Pitch (P) - 5.080mm (0.200 inch). Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength. Belts - Timing - 9.525 mm (3/8 Inch) L          Belts - Timing - 9.525mm Pitch - L Standard Series Timing Belts 9.525mm or 0.375 inch pitch. Pitch (P) - 9.525mm (0.200 inch). Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength. Belts - Timing - 9.525mm Pitch - L Double Sided Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided. Pitch (P) - 9.525mm (0.200 inch). Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength. Belts - Timing - 10 mm T Section          Belts - Timing - 10.000mm Pitch - T10 T Series Metric Timing Belts. Pitch (P) - 10.000mm. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength. Belts - Timing - 10.000mm Pitch - T10 Double Sided T Series Metric Timing Belts. Pitch (P) - 10.000mm. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 7.00mm - Corner Radii ( r ) - 0.60mm. Breaking strength is not indicative of working strength. Belts - Timing - Lengths          Belts - Timing - Lengths Sold per meter - Refer diagrams in timing belt listings for aspects of various pitches. Lengths of timing belt stock are used for reciprocating applications. Not meant to be joined. Belts - Timing - Pulley Flanges to Suit          Pulleys - Timing - Flanges - Suit GT2 Series Pulleys - Timing - Flanges - Suit GT3 Series Pulleys - Timing - Flanges - Suit GT5 Series Pulleys - Timing - Flanges - Suit HTD3 Series Pulleys - Timing - Flanges - Suit HTD5 Series Pulleys - Timing - Flanges - Suit L Series Pulleys - Timing - Flanges - Suit MXL and 40DP Series Pulleys - Timing - Flanges - Suit T10 Series Pulleys - Timing - Flanges - Suit T2.5 Series Pulleys - Timing - Flanges - Suit T5 Series Pulleys - Timing - Flanges - Suit XL Series Belts - Timing - Pulley Stock to Suit          Pulleys - Timing - 2.000mm Pitch - GT - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 2.032mm Pitch - MXL - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 3.000mm Pitch - GT - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 3.000mm Pitch - HTD - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 5.000mm Pitch - GT - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 5.000mm Pitch - HTD - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 5.000mm Pitch - T5 - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 5.080mm Pitch - XL - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 9.525mm Pitch - L - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Pulleys - Timing - 10.000mm Pitch - T10 - STOCK For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Belts - Timing - Pulleys to Suit          Pulleys - Timing - 2.000mm Pitch - GT Timing Pulleys to suit GT 2mm Pitch Timing Belts. Pulleys - Timing - 2.032mm Pitch - MXL Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Pulleys - Timing - 2.073mm Pitch - 40DP Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Pulleys - Timing - 2.500mm Pitch - T2.5 Timing Pulleys to suit T Series 2.500mm Pitch Timing Belts. Pulleys - Timing - 3.000mm Pitch - GT Timing Pulleys to suit GT 3.000mm Pitch Timing Belts. Pulleys - Timing - 3.000mm Pitch - HTD Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Pulleys - Timing - 5.000mm Pitch - GT Pulleys - Timing - 5.000mm Pitch - HTD Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Pulleys - Timing - 5.000mm Pitch - T5 Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Pulleys - Timing - 5.080mm Pitch - XL Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Pulleys - Timing - 9.525mm Pitch - L Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Belts - V          Belts - Vee - 5.0 x 3.0 mm Miniature and small belts. 5.0mm Top Width x 3.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 6.0 x 4.0 mm - Y Miniature and small belts. 6.0mm Top Width x 4.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 6.4 x 4.1 mm - 2L Miniature and small belts. 6.4mm Top Width x 4.1mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 8.0 x 4.0 mm Miniature and small belts. 8.0mm Top Width x 4.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 9.7 x 8.0 mm - SPZ Miniature and small belts. 9.7mm Top Width x 8.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 10.0 x 5.5 mm - M/3L Miniature and small belts. 10.0mm Top Width x 5.5mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 10.0 x 6.0 mm - Z Miniature and small belts. 10.0mm Top Width x 6.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 20.0 x 12.5 mm 20.0mm Top Width x 12.5mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 22.0 x 14.0 mm - C 22.0mm Top Width x 14.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 22.0 x 18.0 mm - SPC 22.0mm Top Width x 18.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 25.0 x 16.0 mm 25.0mm Top Width x 16.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 25.4 x 22.2 mm - SPP-8V 25.4mm Top Width x 22.2mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 31.5 x 19.0 mm - D 31.5mm Top Width x 19.0mm Height. Sizes are nominal and may vary slightly. Belts - Vee - 38.0 x 25.5 mm - E 38.0mm Top Width x 25.5mm Height. Sizes are nominal and may vary slightly. Belts - Variable Speed          Belts - Variable Speed - 22mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts - Variable Speed - 28mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts - Variable Speed - 37mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts - Variable Speed - 42mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts - Variable Speed - 45mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts - Variable Speed - 47mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts - Variable Speed - 55mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts - Variable Speed - 70mm Top Width Variable speed belts designed for use in variomatic and variator drives. Unaffected by tropical climates. Moderate oil-resistance. Suitable for temperatures ranging from -30 °C to +80 °C. The demands made on the belts regarding their cross-rigidity and rotational dynamics are met by high-quality compounding. Belts and Timing Pulleys          Hobby Timing Belts A small selection of popular sizes in MXL Pitch (2.032mm). Hobby Timing Pulleys A small selection of popular sizes in MXL Pitch (2.032mm). Flat Belt Pulleys          Pulleys - Flat Belt Polycarbonate pulleys for flat belts 6mm or 6.35mm wide. Pulleys - Flat Belt - Idler Complete with Needle Roller Bearing. Hobby Vee Belts and Pulleys          Hobby Vee Belts A small selection of popular Belts in M Section (10mm Top Width). See main listings for sizes not shown here. Sizes are nominal and may vary slightly. 10mm Top Width. Hobby Vee Pulleys A small selection of popular Aluminium Pulleys in M Section (10mm Top Width). See main listings for sizes not shown here. 10mm Top Width. Mounting Plates - Conidrive          Mounting Plates - Conidrive For mounting ends of Conidrive™ belting in resiprocating applications. Aluminium Alloy. Supplied with socket head cap screws and internal lock washers. Too many choices? You have selected to see ALL categories containing the term BELT. Click here to see ONLY THE MOST POPULAR categories containing the term BELT.

Cart total A$ 0.00 Currency Options Default (Australian Dollar) British Pound Canadian Dollar Euro Hong Kong Dollar Japanese Yen New Zealand Dollar Singapore Dollar US Dollar You may need to refresh the page if your selected currency doesn't change. Item Popularity Show only popular categories Pictures Show pictures Show all categories starting with A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Major Categories Balls Bearings Belts Ceramic Chain Circlips and Clips Collars Couplings Dental Bearings and Parts Dual Vee Gearboxes Gears Grub Screws Handpiece Parts Keysteel Knobs Spacers Motors Mounts Nuts Parts Boxes Pins Pulleys Racks Rod Screws Seals Shafting Shim Springs Sprockets Tools Tube Universal Joints Washers Small Parts & Bearings Main Pages Home Catalogues Index Catalogue A-Z Online Catalogues A-Z PDF Contact Us Dental Bearings Discount Registration (Conditions Apply) Frequently Asked Questions Freight Rates Hobby Information Home Information Sheets Mailorder Newsletter Subscription Online Catalogue Order Specially Quoted Parts Payment Options Quick Guides Search Technical Information Terms and Conditions of Sale Recommended Links Couplings Information eParcel Tracking Express International Tracking Hobby Engineering Supplies Jokes and Trivia More Materials Information (Matweb) Miniature Bearings Australia Ondrives UK Qumoz Business Directory Rino UK Shafting Information TNT Freight Tracking Unfair Contracts Wikipedia Windows to The Universe World Time

• Search for information pages instead of products
• Mail Order Form
• Order non-standard parts quoted by e-mail
• Freight Rates
• Terms of Sale

All care has been taken in the compilation of this page, however errors may occur. Please do not use the information contained herein for critical applications without first re-checking the information with an independent source. No responsibility will be accepted by Small Parts and Bearings or the Directors of said company for any loss of any kind that may be incurred in any way whatsoever from use of the information provided in these pages.

***** Trademarks *****

Delrin^TM is a registered trademark of duPont Corporation
Teflon^TM is a registered trademark of duPont Corporation

SPB Terms and Conditions of Sale

SPB Freight Rates