Balls Metallic
Easier to machine than standard 316 grade.
316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. This category may be available in the new MBA online store at
Balls - Stainless Steel - 316L Grade.
Related Information:
You may also be interested in
Rod Ends Stainless Steel
Also known as Heim Joints
Dimensions not shown are available on request.
Balls Metallic
A2 Grade. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Non annealed. Hardness: Rockwell C: 25-39. Specific Gravity: 7.916. Low magnetic permeability. Good corrosion resistance. Excellent for use in handling foodstuffs. Note! Increase in magnetic permeability may occur due to the grinding process and can be relieved by heating to over 1000
oC. This category may be available in the new MBA online store at
Balls - Stainless Steel - 304 Grade.
Related Information:
A4 Grade. Very low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities.
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972. Low magnetic permeability. Resistant to severe corrosive conditions. Excellent welding and brazing qualities. Note! Increase in magnetic permeability may occur due to the grinding process and can be releived by heating to over 1000
oC. This category may be available in the new MBA online store at
Balls - Stainless Steel - 316 Grade.
Related Information:
Hardness: Rockwell C: 55-60. Includes 420 and 440C grades
Tolerances available on request. Grades shown are AFBMA / ISO3290-1. AISI440C Stainless Steel. This category may be available in the new MBA online store at
Balls - Stainless Steel - 400 Grade.
Related Information:
Bearings Stainless Special Grades
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. This category may be available in the new MBA online store at
Bearings - Ball - 316 Stainless Steel - Double Row - Open.
Related Information:
Marine, food and medical grade Stainless Steel - Non Hardenable. Open, easier to lubricate. Water lubrication is ok.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. This category may be available in the new MBA online store at
Bearings - Ball - 316 Stainless Steel - Single Row - Open.
Related Information:
Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
Marine, food and medical grade Stainless Steel - Non Hardenable. 316 stainless steel shields.
Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Stainless steel 316 cage, grade 200 type 316 stainless balls, 316 stainless races, 316 stainless steel shields. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.
Related Information:
Knobs Ball
303 stainless steel (European grade 1.4305)
Related Information:
Pins Ball Lock
Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.
Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.
Positive lock detent pins. 300 Grade Stainless Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle.
Related Information:
Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle.
Positive lock detent pins. Aluminium handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Tee handle.
Economical. Positive lock detent pins. Aluminium handles. 304 Stainless Steel Shank. 360 Brass Button. Use industrial grade T handled pins when higher double shear strength is required.
Related Information:
17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.
Positive lock detent pins. Aluminium handles. 300 Grade Stainless Components. 440C Stainless Balls. Ring dimensions may vary. Please contact us before purchasing if the ring dimensions are important to your application.
Related Information:
One end threaded so you can attach your own handle or knob. 303 Stainless Steel.
Related Information:
17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.
Related Information:
Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy.
Related Information:
Rod Ends Stainless Steel
Also known as Heim Joints
Pins Ball Lock
Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.
Related Information:
17-4 PH or PH15-7MO stainless steel spindle and shank. Ground handling pins used in the handling of aircraft and service equipment. Tee handle.
Related Information:
Bearings Stainless Special Grades
Higher corrosion resistance than 440C stainless - HRC59 Hardness - Same or higher load than 440C
Ideal for applications with salt spray or chemicals in the pH range 3 to 12. ISC CASSTOP design with special TBN-6H stainless steel. Other sizes available on request. This category may be available in the new MBA online store at
Bearings - Ball - Anti Corrosion - Special Stainless.
Related Information:
Pins Ball Lock
17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.
Related Information:
Quick release. Commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.
Economical. Positive lock detent pins. Aluminium handles. 360 Brass Buttons. 304 Stainless Steel Shank and balls. Use industrial grade T handled pins when higher double shear strength is required.
Related Information:
Strip
430 Grade stainless steel strip
Pins Clevis
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at
Pins - Clevis - Stainless Steel 300 Grade - Groove Locking.
Related Information:
Match with a suitable R-Clip or Spilt Pin - pin size shown in listings
Related Information:
Pins General
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at
Pins - Clik - Stainless Steel 316 Grade.
Related Information:
Pins Roll
300 Grade Stainless DIN1481/ISO8752.
Related Information:
420 grade stainless DIN1481/ISO8752.
Related Information:
Washers Lock
304 Grade Stainless Steel
Allthread
UNC - UNF - METRIC - 316 grade. Also known as booker rod.
Keys and Keysteel
303, 304 and 316 grade key steel. Square stainless steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. This category may be available in the new MBA online store at
Keysteel Lengths - Square - Stainless Steel.
Related Information:
Allthread
UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.
Couplings Rigid
303 Grade Stainless
Precision Machined. High torsional load. Non marring, easy to install and adjust. Use on hardened shafts, rigid clamp type design, easily machinable. Available with stepped bores and keyways on 5 week delivery.
Mounts Leveling
Corrosion resistant designed with high grade nitrile rubber and stainless steel.
Related Information:
Washers Serrated Locking
Supplied in pairs.
Locking function not affected by lubrication. Assembled in pairs, cam face to cam face. Eliminates the need for adhesives. Reusable. Can be used with fasteners up to grade 12.9.
Collars
Includes 303 and 304 Grade Stainless
Related Information:
Shim
Precision stainless shim sheet. Very thin foil to thick sizes. Includes 302, 304 and 430 grades.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Includes K&S Metals range and more. This category may be available in the new MBA online store at
Shim and Foil - Stainless Steel.
Related Information:
Tooling Balls
440C Hardened to RC 55-58.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. This category may be available in the new MBA online store at
Balls - Checking - Stainless Steel.
Related Information:
440C Hardened to RC 55-58.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. This category may be available in the new MBA online store at
Balls - Checking - Stainless Steel - With Tapped Shank.
Related Information:
440C Hardened to RC 55-58.
Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft. This category may be available in the new MBA online store at
Balls - Fixture - Stainless Steel.
Related Information:
Chain and Sprockets Roller
25-1 ASA 1/4 Inch. Stainless Steel 303 grade with unfinished bore.
Related Information:
Linear Bearings
Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.
Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100
oC Intermittent, 80 Deg C continuous. This category may be available in the new MBA online store at
Bearings - Linear - Ball - Stainless Steel - Closed.
Related Information:
Pins Ball Lock
Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.
Positive lock detent pins. 303 Stainless shanks and heads. 300 Grade Stainless Components. 440C Stainless Balls. Ring dimensions may vary. Please contact us before purchasing if the ring dimensions are important to your application.
Related Information:
Rod Ends Stainless Steel
Also known as Heim Joints
Also known as Heim Joints
Plungers Ball
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.