Angle Categories (Short Delivery Items)


Category Matches

Gearboxes Right Angle

TopHide Pictures

Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm
Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x  75.0 x 44.0mm

Search Rating: 100%

Also see combined categories:
All Right Angle Gearboxes

BLH40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:

Dental Handpiece Parts

TopHide Pictures

Contra Angle Handpiece Old W.H. Parts
Contra Angle Handpiece Old W.H. Parts

Search Rating: 90%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Contra Angle Handpiece Old W.H. Parts.

Intra 25CH Contra Angle Kavo Parts
Intra 25CH Contra Angle Kavo Parts

Search Rating: 89%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of Intra 25CH Contra Angle Kavo Parts.

E4R Slow Speed - Contra Angle Green Band NSK Parts
E4R Slow Speed - Contra Angle Green Band NSK Parts

Search Rating: 88%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


If the product ranges shown on this site are a bit overwhelming you might find a smaller condensed range on the Hobby and Engineering website. See if Hobby & Engineering have smaller hobby ranges of E4R Slow Speed - Contra Angle Green Band NSK Parts.

Ball Joints

TopHide Pictures

Joints - Ball and Socket - Right Angle - Light Duty
Joints - Ball and Socket - Right Angle - Light Duty

Search Rating: 88%

Light duty ball joints provide a pivot point. They are unhardened and should not be used for high load or high repetition applications. Clearance is not specified, so actual joints may range from very loose to reasonably tight.

Steel Type: Zinc Passivated Induction Hardened. Stainless Steel Type: 303 Grade unhardened. Max. Static push/pull loads are valid for both radial and axial loads. Standard Steel type Ball Stud Tensile strength: Rm = 600 N/mm sq (Not applicable to stainless type). Standard Steel type Housing Tensile strength: Rm = 500 N/mm sq (Not applicable to stainless type).


Springs Torsion

TopHide Pictures

Springs - Torsion - Left Hand Wound
Springs - Torsion - Left Hand Wound

Search Rating: 84%

Also see combined categories:
All Torsion Springs

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.


Springs - Torsion - Right Hand Wound
Springs - Torsion - Right Hand Wound

Search Rating: 84%

Also see combined categories:
All Torsion Springs

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.


Gears Inch Racks

TopHide Pictures

Gear Racks - 24DP - Stainless
Gear Racks -  24DP - Stainless

Search Rating: 83%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

24 DP. Approx 3.33mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 64DP - Stainless
Gear Racks -  64DP - Stainless

Search Rating: 83%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 64 DP. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


Gears Metric Bevel

TopHide Pictures

Gears - Bevel - Module 0.5 - Plastic
Gears - Bevel - Module 0.5 - Plastic

Search Rating: 83%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Bevel - Module 1.5 - Plastic
Gears - Bevel - Module 1.5 - Plastic

Search Rating: 83%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Bevel - Module 1.5 - Steel
Gears - Bevel - Module 1.5 - Steel

Search Rating: 83%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Bevel - Module 1 - Plastic
Gears - Bevel - Module 1 - Plastic

Search Rating: 83%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Bevel - Module 2 - Plastic
Gears - Bevel - Module 2 - Plastic

Search Rating: 83%

Also see combined categories:
All Metric Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears Metric Racks

TopHide Pictures

Gear Racks - Module 0.3 - Brass
Gear Racks - Module 0.3 - Brass

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 0.5 - Plastic
Gear Racks - Module 0.5 - Plastic

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 0.75 - Brass
Gear Racks - Module 0.75 - Brass

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 0.8 - Brass
Gear Racks - Module 0.8 - Brass

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 0.8 - Plastic
Gear Racks - Module 0.8 - Plastic

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 0.8 - Steel
Gear Racks - Module 0.8 - Steel

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 1 - Plastic
Gear Racks - Module 1 - Plastic

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Acetal and Nylon

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 1 - Steel
Gear Racks - Module 1 - Steel

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon Steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - Module 2 - Steel
Gear Racks - Module 2 - Steel

Search Rating: 83%

Also see combined categories:
All Metric Gear Racks
All All Gear Racks

20o Pressure Angle. Carbon steel

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Universal Joints Double

TopHide Pictures

Universal Joints - Double Joint - Hobby
Universal Joints - Double Joint - Hobby

Search Rating: 83%

Also see combined categories:
All Universal Joints
All Double Joint Universals

C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.


Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - Hobby
Universal Joints - Single Joint - Hobby

Search Rating: 83%

Also see combined categories:
All Universal Joints
All Single Joint Universals

C45 Carbon Steel. Maximum operating angle 30 degree. Slow speed only.


Gears Inch Anti-Backlash

TopHide Pictures

Gears - Spur - Antibacklash - 32DP - Stainless
Gears - Spur - Antibacklash -  32DP - Stainless

Search Rating: 82%

Also see combined categories:
All Imperial Spur Gears
All Imperial Anti-Backlash Spur Gears

20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Stainless Steel.

32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears Inch Bevel

TopHide Pictures

Gears - Bevel - 24 Diametrical Pitch - Plastic
Gears - Bevel - 24 Diametrical Pitch - Plastic

Search Rating: 82%

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Bevel - 32 Diametrical Pitch - Plastic
Gears - Bevel - 32 Diametrical Pitch - Plastic

Search Rating: 82%

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Bevel - 48 Diametrical Pitch - Plastic
Gears - Bevel - 48 Diametrical Pitch - Plastic

Search Rating: 82%

Also see combined categories:
All Imperial Bevel Gears

For 90o angle power transfer. Ratios exceeding 1 to 1. Nylon and Acetal.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears Inch Racks

TopHide Pictures

Gear Racks - 120DP - Aluminium - Side Holes
Gear Racks -  120DP - Aluminium - Side Holes

Search Rating: 82%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 2024-T4 Aluminium. DP stands for Diametrical Pitch imperial sizes.

120 DP. Approx 0.66mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 48DP - 14.5 PA - Steel
Gear Racks -  48DP - 14.5 PA - Steel

Search Rating: 82%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

14.5o Pressure Angle. DP stands for Diametrical Pitch imperial sizes.

Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. 48 DP. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 72DP - Stainless - Side Holes
Gear Racks -  72DP - Stainless - Side Holes

Search Rating: 82%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

72 DP. Approx 1.11mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Gear Racks - 96DP - Stainless - Side Holes
Gear Racks -  96DP - Stainless - Side Holes

Search Rating: 82%

Also see combined categories:
All Imperial Gear Racks
All All Gear Racks

20o Pressure Angle. 416 stainless steel. DP stands for Diametrical Pitch imperial sizes.

96 DP. Approx 0.83mm between teeth. Lengths longer than 1mtr can only be shipped internationally using Express not post. Please do not select post at checkout for long lengths. For easy ready selected sets of rack and gear please see the HES website.


Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Plain Bore
Universal Joints - Single Joint - High Speed - Plain Bore

Search Rating: 81%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables).

Related Information:

Universal Joints - Single Joint - Slow Speed - Plain Bore
Universal Joints - Single Joint - Slow Speed - Plain Bore

Search Rating: 81%

Also see combined categories:
All Universal Joints
All Single Joint Universals

Carbon Steel. Maximum operating angle 25 to 45 degrees (refer tables). For hand operated applications. Includes miniature sizes from 3mm OD.

Related Information:

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 0.8 - Plastic
Gears - Mitre - Module 0.8 - Plastic

Search Rating: 81%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 1.5 - Brass
Gears - Mitre - Module 1.5 - Brass

Search Rating: 81%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 1 - Brass
Gears - Mitre - Module 1 - Brass

Search Rating: 81%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 1 - Plastic
Gears - Mitre - Module 1 - Plastic

Search Rating: 81%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 2 - Plastic
Gears - Mitre - Module 2 - Plastic

Search Rating: 81%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 3 - Plastic
Gears - Mitre - Module 3 - Plastic

Search Rating: 81%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle - Acetal

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears Inch Mitre

TopHide Pictures

Gears - Mitre - 24 Diametrical Pitch - Brass
Gears - Mitre - 24 Diametrical Pitch - Brass

Search Rating: 80%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - 24 Diametrical Pitch - Plastic
Gears - Mitre - 24 Diametrical Pitch - Plastic

Search Rating: 80%

Also see combined categories:
All Imperial Mitre Gears

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears Metric Mitre

TopHide Pictures

Gears - Mitre - Module 1 - Zinc Diecast
Gears - Mitre - Module 1 - Zinc Diecast

Search Rating: 80%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears - Mitre - Module 2 - Zinc Diecast
Gears - Mitre - Module 2 - Zinc Diecast

Search Rating: 80%

Also see combined categories:
All Metric Mitre Gears

1:1 Ratio. 20o Pressure Angle

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears Metric Spiral Mitre

TopHide Pictures

Gears - Mitre - Spiral - Module 1.5 - Steel
Gears - Mitre - Spiral - Module 1.5 - Steel

Search Rating: 79%

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20o Pressure Angle - 35o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.15 - Brass
Gears - Spur - Module 0.15 - Brass

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.150mm. 20o Pressure Angle.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.4 - Brass
Gears - Spur - Module 0.4 - Brass

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.4 - Plastic
Gears - Spur - Module 0.4 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.4 - Stainless
Gears - Spur - Module 0.4 - Stainless

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Aluminium
Gears - Spur - Module 0.5 - Aluminium

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Brass
Gears - Spur - Module 0.5 - Brass

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Plastic
Gears - Spur - Module 0.5 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Stainless
Gears - Spur - Module 0.5 - Stainless

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.7 - Plastic
Gears - Spur - Module 0.7 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.700mm. 20o Pressure Angle. Acetal.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Aluminium
Gears - Spur - Module 0.8 - Aluminium

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Brass
Gears - Spur - Module 0.8 - Brass

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Plastic
Gears - Spur - Module 0.8 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Stainless
Gears - Spur - Module 0.8 - Stainless

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1.25 - Plastic
Gears - Spur - Module 1.25 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1.25 - Stainless
Gears - Spur - Module 1.25 - Stainless

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. 303 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1.5 - Plastic
Gears - Spur - Module 1.5 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. Acetal and Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Plastic
Gears - Spur - Module 1 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Stainless
Gears - Spur - Module 1 - Stainless

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 303 stainless steel and 416 stainless steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 2.5 - Steel
Gears - Spur - Module 2.5 - Steel

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. Carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 2 - Steel
Gears - Spur - Module 2 - Steel

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. AISI4135 carbon steel

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 3 - Plastic
Gears - Spur - Module 3 - Plastic

Search Rating: 79%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. Nylon

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Pins Clevis

TopHide Pictures

Pins - Clevis - Handle - Bent
Pins - Clevis - Handle - Bent

Search Rating: 78%

Also see combined categories:
All Clevis Pins with Handle
All Clevis Pins

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle.


Hobby Gears

TopHide Pictures

Gears - Spur - Module 0.5 - Hobby - Economy - Plastic
Gears - Spur - Module 0.5 - Hobby - Economy - Plastic

Search Rating: 78%

Also see combined categories:
All Metric Spur Gears
All Hobby Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.


Gears Inch Spur

TopHide Pictures

Gears - Spur - 64DP - Aluminium
Gears - Spur -  64DP - Aluminium

Search Rating: 77%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 64 Diametrical Pitch. Approx 1.25mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Aluminium
Gears - Spur -  72DP - Aluminium

Search Rating: 77%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 72DP - Stainless
Gears - Spur -  72DP - Stainless

Search Rating: 77%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 72 Diametrical Pitch. Approx 1.11mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 0.4 - Plastic with Insert
Gears - Spur - Module 0.4 - Plastic with Insert

Search Rating: 77%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.5 - Plastic with Insert
Gears - Spur - Module 0.5 - Plastic with Insert

Search Rating: 77%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. Acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 0.8 - Plastic with Insert
Gears - Spur - Module 0.8 - Plastic with Insert

Search Rating: 77%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - Module 1 - Plastic with Insert
Gears - Spur - Module 1 - Plastic with Insert

Search Rating: 77%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle.Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Universal Joints Single

TopHide Pictures

Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Search Rating: 77%

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.

Related Information:

Gears Metric Spur

TopHide Pictures

Gears - Spur - Module 1 - Plastic with Stainless Hub
Gears - Spur - Module 1 - Plastic with Stainless Hub

Search Rating: 77%

Also see combined categories:
All Metric Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. Acetal

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears Inch Spur

TopHide Pictures

Gears - Spur - 16DP - 14.5 Degree - Steel
Gears - Spur -  16DP - 14.5 Degree - Steel

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 16DP - 20 Degree - Plastic
Gears - Spur -  16DP - 20 Degree - Plastic

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.588mm (1/16 in.). 20o Pressure Angle. Nylon and acetal. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 16 Diametrical Pitch. Approx 4.99mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 14.5 Degree - Brass
Gears - Spur -  24DP - 14.5 Degree - Brass

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 14.5 Degree - Steel
Gears - Spur -  24DP - 14.5 Degree - Steel

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system. Carbon Steel.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 14.5 Degree - Brass
Gears - Spur -  32DP - 14.5 Degree - Brass

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 14.5 Degree - Plastic
Gears - Spur -  32DP - 14.5 Degree - Plastic

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 20 Degree - Plastic
Gears - Spur -  32DP - 20 Degree - Plastic

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 14.5 Degree - Brass
Gears - Spur -  48DP - 14.5 Degree - Brass

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 14.5 Degree - Plastic
Gears - Spur -  48DP - 14.5 Degree - Plastic

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 14.5o Pressure Angle. Nylon. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 20 Degree - Aluminium
Gears - Spur -  48DP - 20 Degree - Aluminium

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 2024 and 5052 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 48DP - 20 Degree - Stainless
Gears - Spur -  48DP - 20 Degree - Stainless

Search Rating: 76%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.529mm (1/48 in.). 20o Pressure Angle. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 48 Diametrical Pitch. Approx 1.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 20 Degree - Plastic - Plain
Gears - Spur -  24DP - 20 Degree - Plastic - Plain

Search Rating: 75%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 24DP - 20 Degree - Plastic with Insert
Gears - Spur -  24DP - 20 Degree - Plastic with Insert

Search Rating: 75%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. Acetal or Nylon w/ Brass or Stainless Steel Inserts. Clamping or Grub Screw hubs. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Gears - Spur - 32DP - 20 Degree - Plastic with Insert
Gears - Spur -  32DP - 20 Degree - Plastic with Insert

Search Rating: 75%

Also see combined categories:
All Imperial Spur Gears
All All Spur Gears

PCD = No. of Teeth x 0.794mm (1/32 in.). 20o Pressure Angle. DP stands for Diametrical Pitch and is an imperial measurement system.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 32 Diametrical Pitch. Approx 2.49mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

Adjusters

TopHide Pictures

Adjusters - Tilt
Adjusters - Tilt

Search Rating: 74%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Adjustable supports for all kinds of machinery. Mounting feet levelers.

Stem: Mild steel bright zinc plated. Base: Polythene or Polypropylene. Angle of Tilt: 25o from perpendicular. Hexagon Nut: 12mm A/F. Standard colour: Black.

Related Information:

Gears Metric Worms

TopHide Pictures

Worm Gears - Module 0.8 Series 2 - Plastic Gear and Metallic Worm
Worm Gears - Module 0.8 Series 2 - Plastic Gear and Metallic Worm

Search Rating: 73%

Also see combined categories:
All Worm Gears
All Metric Worm Gears

Match with metallic worms Module 0.80 Series 2.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

Gears Inch Worms

TopHide Pictures

Worms - 24DP Series 1 - Metallic
Worms - 24DP Series 1 - Metallic

Search Rating: 71%

Also see combined categories:
All Worms
All Imperial Worms

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

Worms - 32DP Series 1 - Metallic
Worms - 32DP Series 1 - Metallic

Search Rating: 71%

Also see combined categories:
All Worms
All Imperial Worms

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:

Worms - 64DP Series 1 - Metallic
Worms - 64DP Series 1 - Metallic

Search Rating: 71%

Also see combined categories:
All Worms
All Imperial Worms

Worms and Gears must be chosen from the same pitch and series to match. DP is Diametrical Pitch.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Related Information:


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 126933 products in 3078 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts and Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.