Categories that include the term: ACETAL
|
Acetal Balls |  |
Balls - Acetal
High intensity strength, rigidity, outstanding resistance to abrasion and most solvents.
|
Acetal Bearings | |
Bearings - Acetal - with 302 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
|
Bearings - Acetal - with 316 Stainless Steel Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
|
Bearings - Acetal - with Glass Balls
Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.
|
Bearings - Press - Acetal - Flange Mounted
|
Bushes - Plastic - Natural Acetal
|
Acetal Rod | |
Rod - Round - Acetal
Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.
|
Acetal Sheet | |
Sheet - Acetal
|
Acetal Tipped Grub Screws | |
Socket Set Screws - Acetal Tipped
|
Acme Thread | |
Leadscrews - Precision Assemblies - Anti-Backlash
Utilises a patented self-lubricating polyacetal nut radially preloaded on a 303 stainless screw.
|
Adjustable Airmovers | |
Airmovers - Adjustable - Acetal
Airmovers amplify air flow from a small supply of compressed air. Terrific for fume or smoke extraction or to move large volumes of light weight materials.
|
Balls | |
Balls - Bored - Plastic
Bored acetal balls as used in plastic rod ends.
Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.
|
Balls - Plastic Types | |
Hobby Balls - Plastic
A selection of popular plastic (Acetal) balls.
|
Bearings - Acetal | |
Housings - Bearing - Flanged - Square - Plastic
|
Housings - Bearing - Flanged - Square - W300
With integral self aligning plain bearing.
|
Housings - Bearing - Pillow Block - Plastic
|
Bearings - Flange Mounted | |
Bearings - Spyraflo - Flange Mount - Self Aligning
Low profile self aligning flange mounted needle roller, acetal and bronze bearings
|
Bearings - Press Fit Housed | |
Bearings - Spyraflo - Press-Fit - Self Aligning
Needle roller, bronze and acetal bearings in specially designed press fit retainers
|
Bearings - Spyraflo - Self Clinching - Non Aligning
Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.
|
Bearings - Spyraflo - Self Clinching - Self Aligning
Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.
|
Chain - Roller - Plastic | |
Sprockets - Roller Chain - Plastic
Nylon - Acetal - With and without bore inserts.
|
Clamps for Flexiracks | |
Gears - Racks - Flexible
Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.
|
Gears - Racks - Flexible - Clamps
For clamping acetal flexirack.
|
Cluster Gears and Press On Gears to Suit | |
Gears - Spur - 24 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 32 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 48 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 64 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 72 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 80 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 96 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Gears - Spur - 120 Pitch - Hub Mounting
Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.
|
Couplings - Jaw Type | |
Couplings - Jaw Type - With Acetal Spider
Max 1800 RPM. 0.5 to 2.96 Nm.
Angular Offset = 0.1 Deg. Max. Parallel Offset = 0.381mm Max. Fibreglass Hubs - Acetal Spider.
|
Drive Wheels - Friction | |
Wheels - Drive - Friction
O-Ring tyre - Acetal body - Brass bore insert.
|
Gears - Mitre - Metric Sizes | |
Gears - Mitre - Module 0.50
1:1 Ratio. 20 Degree Pressure Angle - Brass and acetal.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - Module 0.60
1:1 Ratio. 20 Degree Pressure Angle - Stainless steel, brass, aluminium and acetal.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - Module 0.80
1:1 Ratio. 20 Degree Pressure Angle - Acetal and brass.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - Module 1.00
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - Module 1.50
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - Module 2.00
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - Module 2.50
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - Module 3.00
1:1 Ratio. 20 Degree Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Mitre - US Sizes | |
Gears - Mitre - 48 Pitch
1:1 Ratio. 20 Degree Pressure Angle - Nylon, brass, carbon steel and acetal.
Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90 degree angle. See Gears - Bevel for other ratios.
|
Gears - Pinion | |
Gears - Spur - 16 Pitch - 20.0 Degree
PCD = No. of Teeth x 1.588mm (1/16 in.). 20 Degree Pressure Angle. Nylon and acetal.
|
Gears - Spur - 24 Pitch - 20.0 Degree
PCD = No. of Teeth x 1.058mm (1/24 in.). 20 Degree Pressure Angle. 2024 aluminium, brass, acetal, 303 stainless steel, nylon, bakelite and alloy steel.
|
Gears - Spur - 32 Pitch - 20.0 Degree
PCD = No. of Teeth x 0.794mm (1/32 in.). 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, acetal, bakelite, brass, carbon steel and nylon.
|
Gears - Spur - 48 Pitch - 20.0 Degree
PCD = No. of Teeth x 0.529mm (1/48 in.). 20 Degree Pressure Angle. 2024 and 5052 aluminium, 303 stainless steel, acetal, brass and nylon.
|
Gears - Spur - 64 Pitch
PCD = No. of Teeth x 0.397mm (1/64 in.). 20 Degree Pressure Angle. 5052 aluminium, stainless steel, acetal and brass.
|
Gears - Spur - 72 Pitch
PCD = No. of Teeth x 0.353mm (1/72 in.). 20 Degree Pressure Angle. 2024 aluminium, stainless steel and acetal.
|
Gears - Spur - Module 0.40
PCD = No. of Teeth x 0.400mm. 20 Degree Pressure Angle. 416 stainless steel, acetal, brass and carbon steel.
|
Gears - Spur - Module 0.50
PCD = No. of Teeth x 0.500mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 0.70
PCD = No. of Teeth x 0.700mm. 20 Degree Pressure Angle. Acetal.
|
Gears - Spur - Module 0.80
PCD = No. of Teeth x 0.800mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 1.00
PCD = No. of Teeth x 1.000mm. 20 Degree Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.
|
Gears - Spur - Module 1.25
PCD = No. of Teeth x 1.250mm. 20 Degree Pressure Angle. 303 stainless steel and acetal.
|
Gears - Spur - Module 1.50
PCD = No. of Teeth x 1.500mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.
|
Gears - Spur - Module 2.00
PCD = No. of Teeth x 2.000mm. 20 Degree Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.
|
Gears - Racks - Metric Sizes | |
Gears - Racks - Module 0.50
20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 0.70
20 Degree Pressure Angle. Acetal.
Plastic.
|
Gears - Racks - Module 0.80
20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 1.00
20 Degree Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 1.25
20 Degree Pressure Angle. Acetal.
Plastic.
|
Gears - Racks - Module 1.50
20 Degree Pressure Angle. Carbon steel, stainless steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 2.00
20 Degree Pressure Angle. Carbon steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 2.50
20 Degree Pressure Angle. Carbon steel, acetal and nylon.
Plastic and metallic.
|
Gears - Racks - Module 3.00
20 Degree Pressure Angle. Carbon steel, acetal and nylon.
Plastic and metallic.
|
Hobby Plastic Rod | |
Hobby Plastic Rod
Hard, stiff plastic (acetal) for machining bushes, gears etc with close tolerances.
Specific Gravity 1.41 g/cm3. Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa. Hardness 80 Rockwell M. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining.
|
Joints - Universal | |
Universal Joints - Plastic
Acetal with or without steel inserts.
|
|
