Categories for: throwing planes
For cars, planes, boats and helicopters. JR, Spektrum, Futaba and Hitec
Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.
Dubro Accessories Listed by Description
Accessories for model airplanes and other hobbies.
Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.
Bushes - Bronze - Dri-Plane - Flanged
Bronze bearings with a graphite-based dry lubricant built in.
Doesnt require oil or grease for lubrication, therefore, cleaner with no out gassing, can operate between -34 to 371 deg C.
Gearheads - Inline - Planetary - Size 17 - Precision
Use with NEMA Size 17 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Gearheads - Inline - Planetary - Size 23 - Economy
Use with NEMA Size 23 Motors.
Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium Flanges. Shaft loading 66kg (150 lbs) radial and 66kg (150 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Gearheads - Inline - Planetary - Size 23 - Precision
Use with NEMA Size 23 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 154kg (347 lbs) radial and 153kg (344 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Gearheads - Inline - Planetary - Size 34 - Economy
Use with NEMA Size 34 Motors.
Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 132kg (300 lbs) radial and 132kg (300 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Gearheads - Inline - Planetary - Size 34 - Precision
Use with NEMA Size 34 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 388kg (875 lbs) radial and 376kg (849 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Gearheads - Inline - Planetary - Size 56 - Economy
Use with NEMA Size 56 Motors.
Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 446kg (1000 lbs) radial and 446kg (1000 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Gearheads - Inline - Planetary - Size 56 - Precision
Use with NEMA Size 56 Motors.
Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 937kg (2100 lbs) radial and 937kg (2100 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Gearheads - Right Angle - Planetary - Size 56 - Precision
Use with NEMA Size 56 Motors.
Maximum input speed 5000 rpm. Shaft loading 937 kg (2100 lbs) radial and 937 kg (2100 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).
Depron foam is a closed cell polystyrene sheet. It is extremely lightweight, moisture resistant and has a wide variety of uses including model aircraft, indoor and outdoor RC aircraft, arts and crafts.
We are unable to ship this product. Available for collection only.
Aircraft Grade. A $10.00 surcharge will apply to all orders of Spruce delivered.
This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery.
Mounts - Spring - Eliptical Leaf - Light Duty
Lightweight NATO approved X Mounts
The 6kg mount is designed to isolate lightweight equipment like computers, printers, electronics panels etc from shock and vibration. All vibration modes and stiffness indicated are for mounting on a flat horizontal surface where vertical indicates the downwards stiffness and horizontal indicates stiffness alonf the horizontal plane. Horizontal 2 figures are for inverted mounting. 304 Stainless leaves, nylon and stainless washers and polymer damping compound. Temperature range +10 Deg C to + 30 Deg C.
Washers - Flat - Titanium - Grade 5
Flat washers. 6AL-4V (Grade 5) High strength titanium alloy.
6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Please note! Tolerances for commercial grade washers are much larger than for precision washers.
Screws - Hex Head - Flanged - Titanium Grade 5
6AL-4V (Grade 5) High strength titanium alloy.
6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Flanged Hexagon Head - hot forged and machined head with rolled thread. Grade 2 Titanium available made to order, also other fastener shapes.
Nuts - Lock - For Bearings - Thin Section
NT/NTH series thin section.
With a smaller OD and thinner section uses less space and weigh less than a standard locknut. Used in aircraft, electronics and small bearing machine tools.
Nuts - Hexagonal - Nylon Insert - Titanium
Nylon Insert for Locking. 6AL-4V (Grade 5) High strength titanium alloy. Not Nyloc™ brand.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. 6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400.
Nuts - Hexagonal - Titanium - Grade 5
METRIC. 6AL-4V (Grade 5) High strength titanium alloy.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. 6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400.
Nuts - Hexagonal - Washer Faced - Titanium
6AL-4V (Grade 5) High strength titanium alloy.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. 6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400.
Screws - Socket - Tapered Head - Titanium
6AL-4V (Grade 5) High strength titanium alloy.
6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Hot forged with rolled thread.
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Use with Motors - DC - Ondrives - Max series.
13mm planetary steel gearhead supplied with fitting kit to suit Size 13 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 1 Stage = 8N, 2 Stage = 12N, 3 Stage = 16N, 4 Stage = 20N, 5 Stage = 20N. Operating Temperature Range: -15°C to +100°C, Mass: 11-23g. Usable output torque depends on torque from motor.
Use with Motors - DC - Ondrives - Max series.
16mm planetary steel gearhead supplied with fitting kit to suit Size 16 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 2 Stage = 15N, 5 Stage = 20N. Operating Temperature Range: -15°C to +65°C, Mass: 23-35g. Usable output torque depends on torque from motor.
Use with Motors - DC - Ondrives - Max series.
22mm planetary steel gearhead supplied with fitting kit to suit Size 22 motors, sleeve bearing output. Maximum Axial Load: 100N. Maximum Radial Load at 10mm from Flange: 70N. Operating Temperature Range: -15°C to +80°C, Mass: 55-94g. Usable output torque depends on torque from motor.
Use with Motors - DC - Ondrives - Max series.
32mm planetary steel gearhead supplied with fitting kit to suit Size 32 motors, sleeve bearing output. Maximum Axial Load: 120N. Maximum Radial Load at 12mm from Flange: 140N. Operating Temperature Range: -15°C to +80°C, Mass: 118-226g. Usable output torque depends on torque from motor.Too many choices?
You have selected to see ALL categories including any of the following words: throwing planes
|
| |||||||||||||||||||||||||
| Select all items starting with... | |||||||||||||||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Or use the category search | ||||||||||||||||
|
| |||||||||||||||||||||||||
