Thread - Small Parts And Bearings Categories


FOUND IN CROSS REFERENCE:- The item was found in our cross reference database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible cross references (other brands) part number matches for THREAD
Cross Referenced Part

THREADLOCKH10 (MBAOLD) matches ADH-THRDLCK-HVY-010 found in Threadlockers
Description/Use: High Strength Threadlocking. Size: 10 ml (0.34 fl.oz). Brand: Molytec -tm-.

Backorder


Cross Referenced Part

THREADLOCKH50 (MBAOLD) matches ADH-THRDLCK-HVY-050 found in Threadlockers
Description/Use: High Strength. Size: 50 ml (1.69 fl.oz). Brand: Molytec -tm-.

Stock: 3


Cross Referenced Part

THREADLOCKHYD50 (MBAOLD) matches ADH-THRDLCK-HYDR-050 found in Threadlockers
Description/Use: Hydraulic Threads. Size: 50 ml (1.69 fl.oz). Brand: Molytec -tm-.

Backorder


Cross Referenced Part

THREADLOCKL10 (MBAOLD) matches ADH-THRDLCK-LOW-010 found in Threadlockers
Description/Use: Low Strength. Size: 10 ml (0.34 fl.oz). Brand: Molytec -tm-.

Stock: 10


Cross Referenced Part

THREADLOCKM10 (MBAOLD) matches ADH-THRDLCK-MED-010 found in Threadlockers
Description/Use: Medium Strength. Size: 10 ml (0.34 fl.oz). Brand: Molytec -tm-.

Stock: 10


Cross Referenced Part

THREADLOCKM10OR (MBAOLD) matches ADH-THRDLCK-MED-OILRES-010 found in Threadlockers
Description/Use: Medium Strength. Size: 10 ml (0.34 fl.oz). Brand: Molytec -tm-.

Stock: 4


Cross Referenced Part

THREADLOCKMW10 (MBAOLD) matches ADH-THRDLCK-MED-WICKIN-010 found in Threadlockers
Description/Use: Medium Strength Wick-In. Size: 10 ml (0.34 fl.oz). Brand: Molytec -tm-.

Stock: 2


Cross Referenced Part

THREADLOCKPLASTIC5G (MBAOLD) matches ADH-THRDLCK-PLAS-005 found in Threadlockers
Description/Use: The Original Super Glue Corporation. Size: Threadlocker - Plastic to Plastic. Brand: 5 g (0.17 oz).

Backorder



Thread

Hide Pictures

Go to Top  


Thread - Kevlar

Thread - Kevlar

Super strong kevlar thread


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Thread Repair - EZ-Lok - Individual Kits

Inserts - Thread Repair - EZ-Lok - Individual Kits

Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Inserts - Thread Repair - Helicoil

Inserts - Thread Repair - Helicoil

Replacement helicoil inserts for after you have purchased a starter kit or tools separately.

Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.

Click for combined categories: All Helicoil Inserts and Kits


Inserts - Thread Repair - Helicoil Extracting Tools

Inserts - Thread Repair - Helicoil Extracting Tools

Extracting tools are used to remove helicoil inserts. This is done by applying the tool to the insert, striking the tools head and turning it counter-clockwide.


Inserts - Thread Repair - Helicoil Installation Tools

Inserts - Thread Repair - Helicoil Installation Tools

Tools for helicoil inserts include economy style and production style prewinder and threaded mandrel types


Inserts - Thread Repair - Helicoil Starter Sets

Inserts - Thread Repair - Helicoil Starter Sets

Helicoil sets include 3 lengths of 1x, 1.5x and 2x the thread diameter. Also included is a tap, an installation tool, a drill and a tang removal tool packed in a sturdy plastic case.

Stainless inserts. Full instructions included. Helicoil kits include a prewinder tool for fine threads or a threaded mandrel for course and metric threads. Metric and Imperial available.

Click for combined categories: All Helicoil Inserts and Kits


Inserts - Thread Repair - Helicoil Tang Breakoff Tools

Inserts - Thread Repair - Helicoil Tang Breakoff Tools

The driving tangs of helicoil inserts must be removed to prevent interference with the end of the assembled screw. For inserts over 1/2 inch use long nosed pliers.


Inserts - Thread Repair - Keylocking

Inserts - Thread Repair - Keylocking

Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.

Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.

Click for combined categories: All Keylocking Inserts and Kits


Inserts - Thread Repair - Keylocking Assortment Kits

Inserts - Thread Repair - Keylocking Assortment Kits

Also known as keenserts.


Click for combined categories: All Keylocking Inserts and Kits


Inserts - Thread Repair - Keylocking Insertion Tools

Inserts - Thread Repair - Keylocking Insertion Tools

Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.


Inserts - Thread Repair - Keylocking Starter Sets

Inserts - Thread Repair - Keylocking Starter Sets

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel.

Click for combined categories: All Keylocking Inserts and Kits


Inserts - Thread Repair - Recoil

Inserts - Thread Repair - Recoil

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

Click for combined categories: All Recoil Inserts and Kits


Inserts - Thread Repair - Recoil Starter Sets

Inserts - Thread Repair - Recoil Starter Sets

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

Click for combined categories: All Recoil Inserts and Kits


Tools - Thread Insert - Power Drive - EZ-Lok

Tools - Thread Insert - Power Drive - EZ-Lok

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

Click for combined categories: All Tools


Allthread

Hide Pictures

Go to Top  


Studs - Full Thread - Stainless Steel

Studs - Full Thread - Stainless Steel

18-8 Stainless Steel Allthread Threaded Bar

Lengths of Threaded 18-8 Stainless Steel Bar.

Click for combined categories: All Studs


Studs - Full Thread - Steel

Studs - Full Thread - Steel

Low Carbon Steel Allthread Threaded Bar

Lengths of Threaded Low Carbon Steel Bar.

Click for combined categories: All Studs


Tools Threading

Hide Pictures

Go to Top  


Tools - Thread Repair

Tools - Thread Repair

Quickly repairs damaged screws

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Click for combined categories: All Tools


Pins - Taper

Hide Pictures

Go to Top  


Pins - Taper - Metric - Extractable - Internal Thread

Pins - Taper - Metric - Extractable - Internal Thread

1:50 Taper.

DIN 7978. Mild Steel.

Click for combined categories: All Metric Taper Pins


Screws Hex Head

Hide Pictures

Go to Top  


Screws - Hex Head - Steel - Zinc Plated - Full Thread

Screws - Hex Head - Steel - Zinc Plated - Full Thread

BSW and METRIC - Set Screws


Click for combined categories: All Hex Head Screws


Assortments

Hide Pictures

Go to Top  


Inserts - Thread Repair - EZ-Lok - Selection Kits

Inserts - Thread Repair - EZ-Lok - Selection Kits

Contains a selection of E-Z Lok inserts

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Ball Screws

Hide Pictures

Go to Top  


Mounts - Universal - For Acme Thread and Ball Screws

Mounts - Universal - For Acme Thread and Ball Screws

Use grade 8 hex socket head cap screws for mounting.


Screws - Ball - Nook Series - Nuts - Right Hand Thread - Double Circuit

Screws - Ball - Nook Series - Nuts - Right Hand Thread - Double Circuit

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.

Screws - Ball - Nook Series - Nuts - Right Hand Thread - Single Circuit

Screws - Ball - Nook Series - Nuts - Right Hand Thread - Single Circuit

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.

Leadscrews

Hide Pictures

Go to Top  


Leadscrews - Metric - Rolled Thread - Carbon Steel

Leadscrews - Metric - Rolled Thread - Carbon Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Carbon Steel C35. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Leadscrews - Metric - Rolled Thread - Stainless Steel

Leadscrews - Metric - Rolled Thread - Stainless Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Stainless steel 316L. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Leadscrews - Metric - Whirled Thread - Carbon Steel

Leadscrews - Metric - Whirled Thread - Carbon Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Longer lengths may be available on request. Single Start. Steel 080 M40 (ck40). Whirled screw left hand and right hand cut on same single piece of material to DIN103 Grade 7e. Use with Trapezoidal Nuts.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Leadscrews - Metric - Whirled Thread - Stainless Steel

Leadscrews - Metric - Whirled Thread - Stainless Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Longer lengths may be available on request. Single Start. 303 Stainless Steel. Whirled screw left hand and right hand cut on same single piece of material to DIN103 Grade 7e. Use with Trapezoidal Nuts.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Tools Measuring

Hide Pictures

Go to Top  


Tools - Thread Gauge

Tools - Thread Gauge

Various types of gauges to help with identification of threads.

Click for combined categories: All Tools


Mounts Leveling

Hide Pictures

Go to Top  


Mounts - Leveling - Socket Type - Acme Thread - Gold Chromate

Mounts - Leveling - Socket Type - Acme Thread - Gold Chromate

Use your own acme thread to make a custom stud


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel

Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel

Use your own acme thread to make a custom stud. 303 Stainless Steel.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Acme Thread - Gold Chromate

Mounts - Leveling - Stud Type - Acme Thread - Gold Chromate


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel

Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel

303 Stainless Steel


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Aluminium

Threaded Rod - Allthread - Aluminium

UNC and UNF light weight aluminium.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Brass

Threaded Rod - Allthread - Brass

UNC - UNF - METRIC brass.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Plastic

Threaded Rod - Allthread - Plastic

UNC - UNF - METRIC - Nylon and PVC.

Light Weight. Non Corrosive. Vibration Resistant.

Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Stainless Steel

Threaded Rod - Allthread - Stainless Steel

UNC - UNF - METRIC - 303, 304 and 316 grades.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Steel - Plain

Threaded Rod - Allthread - Steel - Plain

UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Steel - Zinc Plated

Threaded Rod - Allthread - Steel - Zinc Plated

UNC - UNF - METRIC - BSW


Click for combined categories: All Threaded Rod


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Expansion - Press In - 303 Stainless - Flanged

Inserts - Expansion - Press In - 303 Stainless - Flanged

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.


Click for combined categories: All Expansion Inserts


Inserts - Expansion - Press In - 303 Stainless Steel

Inserts - Expansion - Press In - 303 Stainless Steel

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

Click for combined categories: All Expansion Inserts


Inserts - Expansion - Press In - Brass

Inserts - Expansion - Press In - Brass

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

Click for combined categories: All Expansion Inserts


Inserts - Expansion - Press In - Brass - Flanged

Inserts - Expansion - Press In - Brass - Flanged

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.


Click for combined categories: All Expansion Inserts


Inserts - Rivet Nuts - Klik - Ribbed

Inserts - Rivet Nuts - Klik - Ribbed

Individual Inserts for use with the Klik Thread Setter Tool

These blind thread inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Rivet Nuts - Klik - Standard

Inserts - Rivet Nuts - Klik - Standard

Individual Inserts for use with the Klik Thread Setter Tool

These inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Rivet Nuts - Klik - Threadsert

Inserts - Rivet Nuts - Klik - Threadsert

Individual Inserts for use with the Klik Thread Setter Tool

These inserts can be used in blind or through hole applications. Can be used in almost any material over 0.8mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Self Tapping - For Aluminium - Stainless 303

Inserts - Self Tapping - For Aluminium - Stainless 303

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Aluminium - Steel

Inserts - Self Tapping - For Aluminium - Steel

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Plastics - Stainless 303

Inserts - Self Tapping - For Plastics - Stainless 303

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Plastics - Steel

Inserts - Self Tapping - For Plastics - Steel

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Hex Drive

Inserts - Self Tapping - For Wood - Hex Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive

Inserts - Self Tapping - For Wood - Slotted Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive - Short

Inserts - Self Tapping - For Wood - Slotted Drive - Short

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Tapered Fit - Finserts - For Wood and Plastics

Inserts - Tapered Fit - Finserts - For Wood and Plastics

Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout.

Tools Threading

Hide Pictures

Go to Top  


Tools - Die Holders

Tools - Die Holders

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch).

Click for combined categories: All Tools


Tools - Die Nuts

Tools - Die Nuts

Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.


Click for combined categories: All Dies

Click for combined categories: All Tools


Tools - Dies - Carbon Steel

Tools - Dies - Carbon Steel

Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.


Click for combined categories: All Dies

Click for combined categories: All Tools


Tools - Dies - High Speed Steel

Tools - Dies - High Speed Steel

High Speed Steel Button Dies


Click for combined categories: All Dies

Click for combined categories: All Tools


Tools - Installation - For Self Tapping Inserts

Installation tools for self tapping thread inserts - see the linked inserts categories

Click for combined categories: All Tools

Related Information:
Inserts for plastics

Inserts for wood


Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Click for combined categories: All Tools


Tools - Taps - Carbon Steel - Hand

Tools - Taps - Carbon Steel - Hand

Carbon Steel Straight Flute Taps. Starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

Carbon steel hand taps. Carbon Steel (CS) Hand taps.

Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - Carbon Steel - Hand - Sets

Tools - Taps - Carbon Steel - Hand - Sets

Carbon Steel tap sets including taper, intermediate and bottoming tap in each set

Carbon steel hand taps.

Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Extension

Tools - Taps - High Speed Steel - Extension

Intermediate small shank spiral point extension taps 150mm long


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Hand

Tools - Taps - High Speed Steel - Hand

High Speed Steel Short Machine Flute Taps. starting from M1 and 0-90 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.

High Speed Steel (HSS) Short Machine taps.

Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Helicoil

Tools - Taps - High Speed Steel - Helicoil

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - NPT Pipe

Tools - Taps - High Speed Steel - NPT Pipe

Taper Pipe Taps


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Taper Pipe Taps


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Pulley - 4 Flute - UNC

Tools - Taps - High Speed Steel - Pulley - 4 Flute - UNC

Intermediate pulley taps


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Spiral Flute

Tools - Taps - High Speed Steel - Spiral Flute

Metric spiral flute taps. Ground thread. 50o helix.


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide

Tools - Taps - High Speed Steel - Spiral Flute - Steam Oxide

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps. 37o helix.


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Spiral Point

Tools - Taps - High Speed Steel - Spiral Point

Metric intermediate ground thread high speed steel taps


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Spiral Point - Premium

Tools - Taps - High Speed Steel - Spiral Point - Premium

Premium spiral point intermediate taps in UNC and UNF


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide

Tools - Taps - High Speed Steel - Spiral Point - Steam Oxide

Metric, UNC and UNF high vanadium powder metal high speed steel intermediate taps


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Tap Wrenches

Tools - Tap Wrenches

Tee handle and bar types. Suit taps from 1mm to 12mm.

Click for combined categories: All Tools


Locking Compounds

Hide Pictures

Go to Top  


Threadlockers

Threadlockers

ZAP, Molytec, Loctite, Pacer. Pipe sealant, low to high strength threadlockers. Hydraulic threadlocker. Wick-In. Stops threads loosening from vibration.


Click for combined categories: All Adhesives


Screws Pan Head

Hide Pictures

Go to Top  


Screws - Pan Head - 303/304 Stainless - Philips

Screws - Pan Head - 303/304 Stainless - Philips

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws - Pan Head - 316 Stainless - Philips

Screws - Pan Head - 316 Stainless - Philips

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws - Pan Head - Aluminium

Screws - Pan Head - Aluminium

UNC metal thread machine screws

Nuts sold separately - See Fasteners - Nuts.

Click for combined categories: All Machine Screws


Screws - Pan Head - Brass - Slotted

Screws - Pan Head - Brass - Slotted

Brass metal thread machine screws METRIC

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws

Click for combined categories: All Brass Machine Screws


Screws - Pan Head - Steel - Philips

Screws - Pan Head - Steel - Philips

Metal Thread Screws UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws - Pan Head - Steel - Pozidrive

Screws - Pan Head - Steel - Pozidrive

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws - Pan Head - Steel - Slotted

Screws - Pan Head - Steel - Slotted

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws - Pan Head - Titanium CP1 - Philips

Screws - Pan Head - Titanium CP1 - Philips

Metal Thread Screws. CP Grade 1 Titanium. Metric only.

Nuts sold seperately - See Nuts. CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250.

Click for combined categories: All Machine Screws


Knobs Oval

Hide Pictures

Go to Top  


Knobs - Oval Tapered - Press On - Phenolic

Knobs - Oval Tapered - Press On - Phenolic

Press on knobs hold on securely without threads or set screws

Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.

Click for combined categories: All Oval Knobs

Click for combined categories: All Knobs


Plungers Ball

Hide Pictures

Go to Top  


Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock

Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Ball Plungers


Plungers - Ball - Threaded - Steel - Threadlock

Plungers - Ball - Threaded - Steel - Threadlock

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Ball Plungers


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Threaded Adapter - Locking - Stainless

Plungers - Spring - Threaded Adapter - Locking - Stainless

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Threaded Adapter - Locking - Steel

Plungers - Spring - Threaded Adapter - Locking - Steel

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Threaded Adapter - Non Locking - Stainless

Plungers - Spring - Threaded Adapter - Non Locking - Stainless

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Threaded Adapter - Non Locking - Steel

Plungers - Spring - Threaded Adapter - Non Locking - Steel

Use your own handle on the thread provided.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Threaded - Stainless - With Threadlock

Plungers - Spring - Threaded - Stainless - With Threadlock

With Long-Lok thread locking compound to prevent loosening. 303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Plungers - Spring - Threaded - Steel - Long Stroke

Plungers - Spring - Threaded - Steel - Long Stroke

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Plungers - Spring - Threaded - Steel - Threadlock

Plungers - Spring - Threaded - Steel - Threadlock

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Eyebolts

Hide Pictures

Go to Top  


Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.

Click for combined categories: All Eye Bolts


Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel

Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.

Click for combined categories: All Eye Bolts


Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel

Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.

Click for combined categories: All Eye Bolts


Nuts

Hide Pictures

Go to Top  


Nuts - Hexagonal - Steel - Slotted

Nuts - Hexagonal - Steel - Slotted

Castellated (slotted) hex nuts in UNC or UNF threads


Click for combined categories: All Nuts


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Locking

Nuts - Hexagonal - Locking

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.

Click for combined categories: All Lock Nuts



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.