All Items: Thread Inserts - Categories


December/January Deliveries

Last deliveries for 2014 leave on Friday 19th December. Deliveries resume 5th January. Orders may still be placed over the break. Delivery times shown online allow for the break. We wish all our customers a very merry Christmas and a prosperous 2015.



Part Description Matches

Hide Pictures

Go to Top  


Search again without part description matches.


DBR393

Part number DBR393.

Description: Inserts - Threaded. Description: 8-32 Threaded Inserts.. Description: These brass threaded inserts are the perfect way to put threads int
Group: Dubro Accessories Listed by Description

Stock: 3



DBR391

Part number DBR391.

Description: Inserts - Threaded. Description: 4-40 Threaded Inserts.. Description: These brass threaded inserts are the perfect way to put threads int
Group: Dubro Accessories Listed by Description

Stock: Backorder



DBR392

Part number DBR392.

Description: Inserts - Threaded. Description: 6-32 Threaded Inserts.. Description: These brass threaded inserts are the perfect way to put threads int
Group: Dubro Accessories Listed by Description

Stock: Backorder


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Thread Repair - EZ-Lok - Individual Kits

Inserts - Thread Repair - EZ-Lok - Individual Kits

Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Inserts - Thread Repair - EZ-Lok - Solid 303 Stainless Steel

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Inserts - Thread Repair - EZ-Lok - Solid Carbon Steel

Easy to install with a standard tap, bolt and wrench.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Inserts - Thread Repair - Helicoil

Inserts - Thread Repair - Helicoil

Replacement helicoil inserts for after you have purchased a starter kit or tools separately.

Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.

Click for combined categories: All Helicoil Inserts and Kits


Inserts - Thread Repair - Helicoil Extracting Tools

Inserts - Thread Repair - Helicoil Extracting Tools

Extracting tools are used to remove helicoil inserts. This is done by applying the tool to the insert, striking the tools head and turning it counter-clockwide.


Inserts - Thread Repair - Helicoil Installation Tools

Inserts - Thread Repair - Helicoil Installation Tools

Tools for helicoil inserts include economy style and production style prewinder and threaded mandrel types


Inserts - Thread Repair - Helicoil Starter Sets

Inserts - Thread Repair - Helicoil Starter Sets

Helicoil sets include 3 lengths of 1x, 1.5x and 2x the thread diameter. Also included is a tap, an installation tool, a drill and a tang removal tool packed in a sturdy plastic case.

Stainless inserts. Full instructions included. Helicoil kits include a prewinder tool for fine threads or a threaded mandrel for course and metric threads. Metric and Imperial available.

Click for combined categories: All Helicoil Inserts and Kits


Inserts - Thread Repair - Helicoil Tang Breakoff Tools

Inserts - Thread Repair - Helicoil Tang Breakoff Tools

The driving tangs of helicoil inserts must be removed to prevent interference with the end of the assembled screw. For inserts over 1/2 inch use long nosed pliers.


Inserts - Thread Repair - Keylocking

Inserts - Thread Repair - Keylocking

Steel or 303 Stainless Steel as indicated in the tables. Also known as keenserts.

Steel or 303 Stainless Steel as indicated in the tables. Maximum strength and reliability. Positive mechanical lock against rotation:. The insert kees are driven down into the tapped threads of the parent material during installation to securely lock the insert against rotation. Inserts with internal thread lock are designed to securely lock a bolt when it is entered into the insert only a few turns.

Click for combined categories: All Keylocking Inserts and Kits


Inserts - Thread Repair - Keylocking Assortment Kits

Inserts - Thread Repair - Keylocking Assortment Kits

Also known as keenserts.


Click for combined categories: All Keylocking Inserts and Kits


Inserts - Thread Repair - Keylocking Insertion Tools

Inserts - Thread Repair - Keylocking Insertion Tools

Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.


Inserts - Thread Repair - Keylocking Starter Sets

Inserts - Thread Repair - Keylocking Starter Sets

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel.

Click for combined categories: All Keylocking Inserts and Kits


Inserts - Thread Repair - Recoil

Inserts - Thread Repair - Recoil

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

Click for combined categories: All Recoil Inserts and Kits


Inserts - Thread Repair - Recoil Assortments

Inserts - Thread Repair - Recoil Assortments

A selection of Recoil inserts, taps and installation tools.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

Click for combined categories: All Recoil Inserts and Kits


Inserts - Thread Repair - Recoil Starter Sets

Inserts - Thread Repair - Recoil Starter Sets

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

Click for combined categories: All Recoil Inserts and Kits


Tools - Thread Insert - Power Drive - EZ-Lok

Tools - Thread Insert - Power Drive - EZ-Lok

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

Click for combined categories: All Tools


Inserts - Expansion - Press In - Brass

Inserts - Expansion - Press In - Brass

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

Click for combined categories: All Expansion Inserts


Inserts - Rivet Nuts - Klik - Ribbed

Inserts - Rivet Nuts - Klik - Ribbed

Individual Inserts for use with the Klik Thread Setter Tool

These blind thread inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Rivet Nuts - Klik - Standard

Inserts - Rivet Nuts - Klik - Standard

Individual Inserts for use with the Klik Thread Setter Tool

These inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Rivet Nuts - Klik - Threadsert

Inserts - Rivet Nuts - Klik - Threadsert

Individual Inserts for use with the Klik Thread Setter Tool

These inserts can be used in blind or through hole applications. Can be used in almost any material over 0.8mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Expansion - Press In - Brass - Flanged

Inserts - Expansion - Press In - Brass - Flanged

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.


Click for combined categories: All Expansion Inserts


Inserts - Self Tapping - For Aluminium - Steel

Inserts - Self Tapping - For Aluminium - Steel

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Plastics - Steel

Inserts - Self Tapping - For Plastics - Steel

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Click for combined categories: All Self Tapping Inserts


Inserts - Expansion - Press In - 303 Stainless - Flanged

Inserts - Expansion - Press In - 303 Stainless - Flanged

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.


Click for combined categories: All Expansion Inserts


Inserts - Expansion - Press In - 303 Stainless Steel

Inserts - Expansion - Press In - 303 Stainless Steel

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

Click for combined categories: All Expansion Inserts


Inserts - Self Tapping - For Aluminium - Stainless 303

Inserts - Self Tapping - For Aluminium - Stainless 303

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Plastics - Stainless 303

Inserts - Self Tapping - For Plastics - Stainless 303

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Hex Drive

Inserts - Self Tapping - For Wood - Hex Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive

Inserts - Self Tapping - For Wood - Slotted Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive - Short

Inserts - Self Tapping - For Wood - Slotted Drive - Short

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Tapered Fit - Finserts - For Wood and Plastics

Inserts - Tapered Fit - Finserts - For Wood and Plastics

Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout.

Assortments

Hide Pictures

Go to Top  


Inserts - Thread Repair - EZ-Lok - Selection Kits

Inserts - Thread Repair - EZ-Lok - Selection Kits

Contains a selection of E-Z Lok inserts

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Tools Threading

Hide Pictures

Go to Top  


Tools - Installation - For Self Tapping Inserts

Installation tools for self tapping thread inserts - see the linked inserts categories

Click for combined categories: All Tools

Related Information:
Inserts for plastics

Inserts for wood


Knobs Ball

Hide Pictures

Go to Top  


Knobs - Ball - Threaded - Thermoplastic

Knobs - Ball - Threaded - Thermoplastic

With moulded plastic threads, or metalic threaded inserts - brass or steel.

Click for combined categories: All Ball Knobs

Click for combined categories: All Knobs


Bungs

Hide Pictures

Go to Top  


Bungs - Round - Threaded

Bungs - Round - Threaded

Round tubing end inserts with a thread


Click for combined categories: All Bungs


Bungs - Square - Threaded

Bungs - Square - Threaded

Square tubing end inserts with a thread


Click for combined categories: All Bungs


Knobs Lever

Hide Pictures

Go to Top  


Knobs - Lever

Knobs - Lever

Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.

Click for combined categories: All Lever Knobs

Click for combined categories: All Knobs


Knobs Ball

Hide Pictures

Go to Top  


Knobs - Ball - Threaded - Recessed Top

Knobs - Ball - Threaded - Recessed Top

Brass threaded insert. Phenolic.

Click for combined categories: All Ball Knobs

Click for combined categories: All Knobs


Knobs - Ball - Threaded - Plastic with Knurl

Knobs - Ball - Threaded - Plastic with Knurl

Brass threaded insert. Knurled circumference to assist with grip.

Click for combined categories: All Ball Knobs

Click for combined categories: All Knobs


Knobs Mushroom

Hide Pictures

Go to Top  


Knobs - Mushroom Oval - Threaded - Phenolic

Knobs - Mushroom Oval - Threaded - Phenolic

Brass threaded insert.

Click for combined categories: All Mushroom Knobs

Click for combined categories: All Knobs


Knobs Ball

Hide Pictures

Go to Top  


Knobs - Ball - Threaded - Plastic with Groove

Knobs - Ball - Threaded - Plastic with Groove

Black plastic ball knobs with a groove around the circumference. Brass threaded insert.

Click for combined categories: All Ball Knobs

Click for combined categories: All Knobs


Knobs Wing

Hide Pictures

Go to Top  


Knobs - Wing - Female - Phenolic

Knobs - Wing - Female - Phenolic

Brass threaded insert


Click for combined categories: All Wing Knobs


Knobs Ball

Hide Pictures

Go to Top  


Knobs - Ball - Threaded - Soft Touch

Knobs - Ball - Threaded - Soft Touch

Rugged thermoplastic construction with a soft feel. Moulded with a soft rubber shell providing a sure grip. Zinc plated steel insert.

Click for combined categories: All Ball Knobs

Click for combined categories: All Knobs


Knobs Oval

Hide Pictures

Go to Top  


Knobs - Oval Tapered - Press On - Phenolic

Knobs - Oval Tapered - Press On - Phenolic

Press on knobs hold on securely without threads or set screws

Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.

Click for combined categories: All Oval Knobs

Click for combined categories: All Knobs


Knobs Ball

Hide Pictures

Go to Top  


Knobs - Ball - Threaded - Lateral Grooved

Knobs - Ball - Threaded - Lateral Grooved

Moulded platic control ball handles for machine tools, jigs, fixtures etc.

Stylish grooves to assist with grip. Brass threaded insert.

Click for combined categories: All Ball Knobs

Click for combined categories: All Knobs


Tools Threading

Hide Pictures

Go to Top  


Tools - Taps - High Speed Steel - Helicoil

Tools - Taps - High Speed Steel - Helicoil

Special oversized taps to suit Helicoil Brand -tm- inserts. Intermediate and Bottoming. Inch sizes are class 2B and metric are class 5H.


Click for combined categories: All Taps

Click for combined categories: All Tools


Knobs Push Pull

Hide Pictures

Go to Top  


Knobs - Push-Pull

Knobs - Push-Pull

Contoured knobs plated Steel threaded female inserts. Fitted with generous dome to shank ratios to accommodate both push and pull operations. Temperature Range: -30oC to +140oC.

Click for combined categories: All Push Pull Knobs


Nuts

Hide Pictures

Go to Top  


Nuts - Well

Nuts - Well

Flanged neoprene bushing with a brass machine nut moulded into one end. Tightening a conventional machine screw threaded in a brass nut causes the insert to expand, making a secure fastening. 1. Place the Well Nut(R) insert all the way into a pre-drilled hole until the flange is firmly against the mounting surface. 2. Pass machine screw through part to be fastened and tighten until snug.

Click for combined categories: All Nuts


Thread

Hide Pictures

Go to Top  


Thread - Kevlar

Thread - Kevlar

Super strong kevlar thread


Tools Bits

Hide Pictures

Go to Top  


Bits - Insert

Bits - Insert

Insert bits for use with hand type screwdriver bit holders


Tools Measuring

Hide Pictures

Go to Top  


Tools - Thread Gauge

Tools - Thread Gauge

Various types of gauges to help with identification of threads.

Click for combined categories: All Tools


Tools Threading

Hide Pictures

Go to Top  


Tools - Thread Repair

Tools - Thread Repair

Quickly repairs damaged screws

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Click for combined categories: All Tools


Allthread

Hide Pictures

Go to Top  


Studs - Full Thread - Stainless Steel

Studs - Full Thread - Stainless Steel

18-8 Stainless Steel Allthread Threaded Bar

Lengths of Threaded 18-8 Stainless Steel Bar.

Click for combined categories: All Studs


Studs - Full Thread - Steel

Studs - Full Thread - Steel

Low Carbon Steel Allthread Threaded Bar

Lengths of Threaded Low Carbon Steel Bar.

Click for combined categories: All Studs


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Silicone Insert

Couplings - Silicone Insert

3 to 8 Nm

Zero Backlash. Electrical Isolation. Aluminium Hub with 40 Shore Hardness Silicone Insert.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings Other

Hide Pictures

Go to Top  


Couplings - Servo Insert - Clamp Type

Couplings - Servo Insert - Clamp Type


Couplings - Servo Insert - Outer Conical Hub

Couplings - Servo Insert - Outer Conical Hub


Couplings - Servo Insert - Set Screw

Couplings - Servo Insert - Set Screw


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Nylon Insert - Aluminium

Nuts - Hexagonal - Nylon Insert - Aluminium

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Brass

Nuts - Hexagonal - Nylon Insert - Brass

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Stainless Steel

Nuts - Hexagonal - Nylon Insert - Stainless Steel

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Steel

Nuts - Hexagonal - Nylon Insert - Steel

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Titanium

Nuts - Hexagonal - Nylon Insert - Titanium

Nylon Insert for Locking. 6AL-4V (Grade 5) High strength titanium alloy. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. 6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400.

Click for combined categories: All Lock Nuts


Leadscrews

Hide Pictures

Go to Top  


Leadscrews - Metric - Rolled Thread - Carbon Steel

Leadscrews - Metric - Rolled Thread - Carbon Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Carbon Steel C35. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Leadscrews - Metric - Rolled Thread - Stainless Steel

Leadscrews - Metric - Rolled Thread - Stainless Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Stainless steel 316L. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Leadscrews - Metric - Whirled Thread - Carbon Steel

Leadscrews - Metric - Whirled Thread - Carbon Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Longer lengths may be available on request. Single Start. Steel 080 M40 (ck40). Whirled screw left hand and right hand cut on same single piece of material to DIN103 Grade 7e. Use with Trapezoidal Nuts.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Leadscrews - Metric - Whirled Thread - Stainless Steel

Leadscrews - Metric - Whirled Thread - Stainless Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Longer lengths may be available on request. Single Start. 303 Stainless Steel. Whirled screw left hand and right hand cut on same single piece of material to DIN103 Grade 7e. Use with Trapezoidal Nuts.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - HRC

Couplings - HRC


Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Ball Screws

Hide Pictures

Go to Top  


Mounts - Universal - For Acme Thread and Ball Screws

Mounts - Universal - For Acme Thread and Ball Screws

Use grade 8 hex socket head cap screws for mounting.


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Multijaw - Precision

Couplings - Multijaw - Precision

Max Torque 3.5 Nm.

303 Stainless Steel. Stainless socket set screws supplied. 48 teeth - 64 Pitch. Max Torque 3.5 N.m (500 oz.in).

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Three Jaw Type - Inserts

Couplings - Three Jaw Type - Inserts

Match with Three Jaw Type hubs by OD

Use Bost-Bronz inserts for high torque loads at slower speeds. Use rubber for quiter operation. Use polyurethane for moderate to heavy shock loads.

Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Rectangular - Insert Type

Suspension Units - Rubber - Rectangular - Insert Type

Housing (up to DOS45): Light Alloy (DOS50): spheroidal graphite cast iron. Rubber: Black, hardness 70 Shore A. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30oC / Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Round - Insert Type

Suspension Units - Rubber - Round - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Square - Insert Type

Suspension Units - Rubber - Square - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Rollers

Hide Pictures

Go to Top  


Rollers - Solid - Bonded to Steel Insert - Black Neoprene

Rollers - Solid - Bonded to Steel Insert - Black Neoprene

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.

Rollers - Solid - Bonded to Steel Insert - Coloured Urethane

Rollers - Solid - Bonded to Steel Insert - Coloured Urethane

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting.

Pins - Taper

Hide Pictures

Go to Top  


Pins - Taper - Metric - Extractable - Internal Thread

Pins - Taper - Metric - Extractable - Internal Thread

1:50 Taper.

DIN 7978. Mild Steel.

Click for combined categories: All Metric Taper Pins


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Spline Type - Complete

Couplings - Spline Type - Complete

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Mounts Leveling

Hide Pictures

Go to Top  


Mounts - Leveling - Socket Type - Acme Thread - Gold Chromate

Mounts - Leveling - Socket Type - Acme Thread - Gold Chromate

Use your own acme thread to make a custom stud


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel

Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel

Use your own acme thread to make a custom stud. 303 Stainless Steel.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Acme Thread - Gold Chromate

Mounts - Leveling - Stud Type - Acme Thread - Gold Chromate


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel

Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel

303 Stainless Steel


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Lock - For Bearings - Left Hand Thread - NL Series

Nuts - Lock - For Bearings - Left Hand Thread - NL Series

NL series used for high rotational parts.


Click for combined categories: All Lock Nuts for Bearings


Leadscrews

Hide Pictures

Go to Top  


Leadscrews - Metric - Acme

Leadscrews - Metric - Acme

Acme Leadscrew Thread - Use with Acme Supernuts


Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Oldham - Hubs - Clamp Style

Couplings - Oldham - Hubs - Clamp Style

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Click for combined categories: All Oldham Hubs

Related Information:
Shafting


Couplings - Spider Type A - Complete

Couplings - Spider Type A - Complete

2.1 to 17 Nm. Match only hubs and spiders from listings SPIDER TYPE A. Insert is set between the jaws of two hubs.

Split Type Hub. Preloaded Rubber Spider. Minimal backlash. Choice of 3 different spiders for each size provides for different torque requirements. Hubs and spiders available separately or as a complete unit.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting

Replacement Hubs To Suit


Couplings - Spider Type B - Complete

Couplings - Spider Type B - Complete

Max 3600 RPM. 0.39 to 16.27 Nm. Match only hubs and spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Rubber spider and metal hubs.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting

Replacement Hubs To Suit


Couplings - Spider Type C - Complete

Couplings - Spider Type C - Complete

Miniature aluminium curved jaw flexible couplings. 2 to 160 Nm. Match only hubs and spiders from listings SPIDER TYPE C. Inserts are held between the jaws of two hubs.

Discs (either red as standard with blue or white optional) are available to purchase separately. Flexible couplings transmit torque and rotational angle while absorbing misalignment. When the misalignment exceeds allowable values, vibration may result or the life of the coupling may become shortened. Zero backlash in low torque application, made capable by having the hubs pressed in a spacer. Can be used as a flexible coupling in a high torque application. Polyurethane spider.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Spline Type - Spare Hubs

Couplings - Spline Type - Spare Hubs

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Three Jaw Type - Hubs

Couplings - Three Jaw Type - Hubs

Match with Three Jaw Type inserts by OD. Two Hubs and one insert will be needed to make a complete coupling.

Complete with keyway and set screw. No lubrication needed.

Screws Hex Head

Hide Pictures

Go to Top  


Screws - Hex Head - Steel - Zinc Plated - Full Thread

Screws - Hex Head - Steel - Zinc Plated - Full Thread

BSW and METRIC - Set Screws


Click for combined categories: All Hex Head Screws


Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - Nook Series - Nuts - Right Hand Thread - Double Circuit

Screws - Ball - Nook Series - Nuts - Right Hand Thread - Double Circuit

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.

Screws - Ball - Nook Series - Nuts - Right Hand Thread - Single Circuit

Screws - Ball - Nook Series - Nuts - Right Hand Thread - Single Circuit

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.

Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Metric - Flanged - Bronze

Leadscrew Nuts - Metric - Flanged - Bronze

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Bronze CuSn8P. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil. Manual or powered control - Low and medium rotational speeds - For working under load. 6 Mounting Holes On Flange.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Rolled Leadscrew

Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Flanged - Plastic

Leadscrew Nuts - Metric - Flanged - Plastic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300. Single Start / Right Hand.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Rolled Leadscrew

Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Hexagonal - Metallic

Leadscrew Nuts - Metric - Hexagonal - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Round - Metallic

Leadscrew Nuts - Metric - Round - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Square - Metallic

Leadscrew Nuts - Metric - Square - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Oldham - Disks for Clamp Style

Couplings - Oldham - Disks for Clamp Style

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Click for combined categories: All Oldham Disks

Related Information:
Shafting



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 148298 products in 3732 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.