Tee Gearboxes - Small Parts And Bearings Categories


We are currently closed for stocktake and Easter. Online, e-mail and fax orders placed during this time will be processed on Tuesday 22nd April. Please have a Happy Easter.


FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

B332.31.2 found in Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x 30.5 x 18.7mm
Max.Torque: 0.68. Efficiency: 94. Gear Material: Hardened Steel.

Backorder



Gearboxes Tee

Hide Pictures

Go to Top  


Gearboxes - Tee - 100.0 x 100.0 x 60.0mm

Gearboxes - Tee - 100.0 x 100.0 x 60.0mm

BLHT50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  36.5 x  36.5 x 29.4mm

Gearboxes - Tee - 36.5 x 36.5 x 29.4mm

GDRAB Series. Miniature gearbox.


Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  55.0 x  55.0 x 34.0mm

Gearboxes - Tee - 55.0 x 55.0 x 34.0mm

BLHT30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  65.0 x  50.0 x 50.0mm

Gearboxes - Tee - 65.0 x 50.0 x 50.0mm

BL8 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  75.0 x  75.0 x 44.0mm

Gearboxes - Tee - 75.0 x 75.0 x 44.0mm

BLHT40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  80.0 x  60.0 x 50.0mm

Gearboxes - Tee - 80.0 x 60.0 x 50.0mm

BL8 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee - 100.0 x  75.0 x  44.0mm

Gearboxes - Tee - 100.0 x 75.0 x 44.0mm

Bevel Gears - 3.0 to 10.3 Nm. BLHM40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  38.9 x  38.1 x 27.0mm A

Gearboxes - Tee - 38.9 x 38.1 x 27.0mm A

Worm Gear. WG11 Series. Miniature gearbox.

Maximum input speed 2000 RPM. Maximum Backlash 5o. Worm Gears.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  38.9 x  38.1 x 27.0mm B

Gearboxes - Tee - 38.9 x 38.1 x 27.0mm B

1:1, 2:1 and 3:1 ratios. GDRA Series. Miniature gearbox.

Max Speed 2000 RPM. Max Backlash 5o. Bevel Gears.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  55.0 x  40.0 x  25.0mm

Gearboxes - Tee - 55.0 x 40.0 x 25.0mm

Bevel Gears - 0.53 to 1.77 Nm. BLHM20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  62.5 x  50.8 x  30.0mm

Gearboxes - Tee - 62.5 x 50.8 x 30.0mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  85.5 x  77.8 x  31.8mm

Gearboxes - Tee - 85.5 x 77.8 x 31.8mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Tee Gearboxes


Gearboxes Inline

Hide Pictures

Go to Top  


Gearboxes - Inline -  27 x  45mm

Gearboxes - Inline - 27 x 45mm

J27 Series. Miniature gearbox.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 60g. Backlash: Depends on ratio. Hours Life: 12000 hr. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Click for combined categories: All Inline Gearboxes

Related Information:
Inexpensive Gearmotor Kits


Gearboxes Right Angle

Hide Pictures

Go to Top  


Gearboxes - Right Angle - Model RA 0365-0365-0294 - 36.5 x  36.5 x 29.4mm

Gearboxes - Right Angle - Model RA 0365-0365-0294 - 36.5 x 36.5 x 29.4mm

1:1 ratio. GDRA Series. Miniature gearbox.


Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x  40.0 x 25.0mm

Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x 40.0 x 25.0mm

BLH20 Series. Miniature gearbox.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes Offset

Hide Pictures

Go to Top  


Gearboxes - Offset - 175 x 150 x  60

Gearboxes - Offset - 175 x 150 x 60

FF30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: High Carbon Steel 817M40(EN24). Weight 5.5kg. Backlash: 1o. Hours Life: 12000 hr. Max Input Speed: 1500 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only.

Click for combined categories: All Offset Gearboxes

Related Information:
Output Shafts


Gearboxes - Offset -  60 x  60

Gearboxes - Offset - 60 x 60

Base mounted. SRBM60 Series.

Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : Less than 0.11mm / Less than 0.31mm. Operating Temp : -10 to 60 Deg C | Approx weight : 26 grams.

Click for combined categories: All Offset Gearboxes


Gearboxes Inline

Hide Pictures

Go to Top  


Gearboxes - Inline - 114 x  90mm

Gearboxes - Inline - 114 x 90mm

NT121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Click for combined categories: All Inline Gearboxes

Related Information:
Inexpensive Gearmotor Kits


Gearboxes - Inline -  63 x  50mm

Gearboxes - Inline - 63 x 50mm

J65 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Click for combined categories: All Inline Gearboxes

Related Information:
Inexpensive Gearmotor Kits


Gearboxes Bu-Ord

Hide Pictures

Go to Top  


Gearboxes - Bu-Ord - Size 11 - Double End

Gearboxes - Bu-Ord - Size 11 - Double End

SRBO11 Series.

Items listed as Zero Backlash are for loads less than the ZB Torque Limit shown. Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes - Bu-Ord - Size 15 - Double End

Gearboxes - Bu-Ord - Size 15 - Double End

SRBO15 Series.

Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes - Bu-Ord - Size 15 - Single End

Gearboxes - Bu-Ord - Size 15 - Single End

SRBO15 Series.

Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes - Bu-Ord - Size 18 - Double End

Gearboxes - Bu-Ord - Size 18 - Double End

SRBO18 Series.

Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes Right Angle

Hide Pictures

Go to Top  


Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

1 to 1 ratio with rated speeds up to 1800rpm. Sealed gearcase. Key drive shafts. Keys included.

4140 Heat Treated steel gears and shafts. Aluminium alloy hard anodised case. Maximum operating temperature 90 Deg C (200 Deg F). Optional foot mount plates available - also listed in this category.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x  55.0 x 34.0mm

Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x 55.0 x 34.0mm

BLH30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x  75.0 x 44.0mm

Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm

BLH40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm

Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm

BLH50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm

Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm

BLH70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes Cross Axis

Hide Pictures

Go to Top  


Gearboxes - Cross Axis - 110 x  95 x  38mm

Gearboxes - Cross Axis - 110 x 95 x 38mm

Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis - 130 x 110 x  46mm

Gearboxes - Cross Axis - 130 x 110 x 46mm

Worm and Wormwheel box. 13.4 to 57.0Nm. 5:1 to 120:1 ratios. P55 and PF55 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis - 150 x 125 x  54mm

Gearboxes - Cross Axis - 150 x 125 x 54mm

Worm and Wormwheel box. 30.0 to 118.0Nm. 5:1 to 120:1 ratios. P60 and PF60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis - 170 x 145 x  60mm

Gearboxes - Cross Axis - 170 x 145 x 60mm

Worm and Wormwheel box. 38.0 to 164.0Nm. 5:1 to 120:1 ratios. P70 and PF70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis -  47 x  40 x  22mm

Gearboxes - Cross Axis - 47 x 40 x 22mm

Worm and Wormwheel box. 1.4 to 2.5Nm. 5:1 to 120:1 ratios. P20 and PF20.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis -  70 x  60 x  28mm

Gearboxes - Cross Axis - 70 x 60 x 28mm

Worm and Wormwheel box. 2.5 to 8.8Nm. 5:1 to 120:1 ratios. P30 and PF30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis -  90 x  75 x  32mm

Gearboxes - Cross Axis - 90 x 75 x 32mm

Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis - 104 x  63 x  63

Gearboxes - Cross Axis - 104 x 63 x 63

Helical or Wormwheel Gears. 15mm Bores. E40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  52 x  34 x  34

Gearboxes - Cross Axis - 52 x 34 x 34

Helical or Wormwheel Gears. 6mm Bores. E20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel: Aluminium Bronze (CA104 / AB2). Circlips: Steel (not plated). Bearing: Steel 2RS (Rubber seals fitted).

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis -  78 x  48 x  48

Gearboxes - Cross Axis - 78 x 48 x 48

Helical or Wormwheel Gears. 10mm Bores. E30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis - 150 x  96 x  96 A

Gearboxes - Cross Axis - 150 x 96 x 96 A

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis - 136.5 x 111.1 x  63.5

Gearboxes - Cross Axis - 136.5 x 111.1 x 63.5

Worm gears.

Maximum input speed 1800 RPM. Approx weight 2.7 KG (6 lb).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  52.4 x  44.5 x  25.4

Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4

Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  77.8 x  63.5 x  34.9

Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9

Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  85.6 x  66.7 x  34.9

Gearboxes - Cross Axis - 85.6 x 66.7 x 34.9

Worm Gears - Commercial size 26.

Maximum input speed 1800 RPM. Approx weight 0.6 KG (20 oz).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  38.9 x  31.8 x  19.1mm

Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1mm

Worm Gears - Precision.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 Deg C to +146 Deg C (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes Inline

Hide Pictures

Go to Top  


Gearboxes - Inline - 112.0 x  52.0 Low Backlash

Gearboxes - Inline - 112.0 x 52.0 Low Backlash

Taper Gears - Weight: 1.50kg. TG112 Series.

Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: Less than 8.1 arc/min at output. Max Input Speed: 3000 Rpm.

Click for combined categories: All Inline Gearboxes

Related Information:
Inexpensive Gearmotor Kits


Gearboxes Right Angle

Hide Pictures

Go to Top  


Gearboxes - Right Angle - Model RA 0300-0300-0180 - 30.0 x  30.0 x 18.0mm

Gearboxes - Right Angle - Model RA 0300-0300-0180 - 30.0 x 30.0 x 18.0mm

Economy Bevel Gear Type. Miniature gearbox.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0400-0400-0200 - 40.0 x  40.0 x 20.0mm

Gearboxes - Right Angle - Model RA 0400-0400-0200 - 40.0 x 40.0 x 20.0mm

Mitre Gears 1:1 ratio. GDRA Series. Miniature gearbox.

Max Speed 3000 RPM. Max Backlash 1o. Ball bearings both ends. Base mounting both sides.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0500-0500-0300 - 50.0 x  50.0 x 30.0mm

Gearboxes - Right Angle - Model RA 0500-0500-0300 - 50.0 x 50.0 x 30.0mm

Economy Bevel Gear Type. GDRA Series.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0625-0508-0300 - 62.5 x  50.8 x 30.0mm

Gearboxes - Right Angle - Model RA 0625-0508-0300 - 62.5 x 50.8 x 30.0mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x  44.0 x  44.0mm

Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x 44.0 x 44.0mm

Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0800-0800-0400 - 80.0 x  80.0 x 40.0mm

Gearboxes - Right Angle - Model RA 0800-0800-0400 - 80.0 x 80.0 x 40.0mm

Mitre Gears 1:1 ratio. GDRA Series.

Max Speed 3000 RPM. Max Backlash 1o. Ball bearings both ends. Base mounting both sides.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0855-0778-0318 - 85.5 x  77.8 x  31.8mm

Gearboxes - Right Angle - Model RA 0855-0778-0318 - 85.5 x 77.8 x 31.8mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle Model RA 0400-0400-0250(B) - 40.0 x  40.0 x 25.0mm (B)

Gearboxes - Right Angle Model RA 0400-0400-0250(B) - 40.0 x 40.0 x 25.0mm (B)

Economy Bevel Gear Type. GDRA Series. Miniature gearbox.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearbox Output Shafts

Hide Pictures

Go to Top  


Gearboxes - Output Shafts - For E Type Helical Reducers

Gearboxes - Output Shafts - For E Type Helical Reducers

For use in Right Angle gearboxes with bores. E Series.

Stainless 303 shaft. Steel keys and circlips. E-X and E-DX types suitable for E type gearboxes (right angle types).

Click for combined categories: All Shafts


Gearboxes - Output Shafts - For P Type Worm Reducers

Gearboxes - Output Shafts - For P Type Worm Reducers

For use in Cross Axis gearboxes with bores. P and PF Series.

Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).

Click for combined categories: All Shafts


Gearboxes Educational Kits

Hide Pictures

Go to Top  


Educational Gearbox Kits

Educational Gearbox Kits

Basic gearbox kits for prototyping, testing and learning


Tee Joints

Hide Pictures

Go to Top  


Joints - Tee - Tubing and Rod

Joints - Tee - Tubing and Rod

Inexpensive nylon joiners for hobby tubing and rod


Cross Blocks

Hide Pictures

Go to Top  


Joints - Swivel - Tee Handle - Steel

Joints - Swivel - Tee Handle - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Latches

Hide Pictures

Go to Top  


Handles - Tee

Handles - Tee

Zinc plated steel 7.94mm (5/16in.) square shank.


Pins - Pull

Hide Pictures

Go to Top  


Pins - Pull - Tee Handle - Steel

Pins - Pull - Tee Handle - Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -Tee Handle - Locking

Latches - 1/4 Turn -Tee Handle - Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Pins - Pull

Hide Pictures

Go to Top  


Pins - Pull - Tee Handle - Stainless Steel

Pins - Pull - Tee Handle - Stainless Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -Tee Handle - Non Locking

Latches - 1/4 Turn -Tee Handle - Non Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Tee Handle - Locking - Steel

Plungers - Spring - Tee Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Pins - Pull

Hide Pictures

Go to Top  


Pins - Pull - Tee Handle - Aluminium and Steel

Pins - Pull - Tee Handle - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Tee Handle - Locking - Stainless

Plungers - Spring - Tee Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -Tee Handle with Pawl - Black Finish

Latches - 1/4 Turn -Tee Handle with Pawl - Black Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle with Pawl - Chrome Finish

Latches - 1/4 Turn -Tee Handle with Pawl - Chrome Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking

Latches - 1/4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Latches - 1/4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Knobs Cross

Hide Pictures

Go to Top  


Knobs - Cross - Blind - Female

Knobs - Cross - Blind - Female


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Knobs - Cross - Standard - Female

Knobs - Cross - Standard - Female


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Knobs - Cross - Standard - Male

Knobs - Cross - Standard - Male


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Cross Blocks

Hide Pictures

Go to Top  


Cross Blocks - Heavy Duty - Two Knobs

Cross Blocks - Heavy Duty - Two Knobs

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Cross Blocks - Heavy Duty - Two Nuts

Cross Blocks - Heavy Duty - Two Nuts

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Knobs Cross

Hide Pictures

Go to Top  


Knobs - Cross - Through Hole - Female

Knobs - Cross - Through Hole - Female


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Cross Blocks

Hide Pictures

Go to Top  


Cross Blocks - Heavy Duty - One Knob One Nut

Cross Blocks - Heavy Duty - One Knob One Nut

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Spur Gear Stock Metric

Hide Pictures

Go to Top  


Gears - Spur - Stock - Module 0.4 - Carbon Steel

Gears - Spur - Stock - Module 0.4 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 0.5 - Carbon Steel

Gears - Spur - Stock - Module 0.5 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 0.8 - Carbon Steel

Gears - Spur - Stock - Module 0.8 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 1 - Carbon Steel

Gears - Spur - Stock - Module 1 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Spur Gear Stock Imperial

Hide Pictures

Go to Top  


Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears Imperial Mitre

Hide Pictures

Go to Top  


Gears - Mitre - 16 Diametrical Pitch - Steel

Gears - Mitre - 16 Diametrical Pitch - Steel

1:1 Ratio. 20o Pressure Angle - Unhardened Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gear Blanks

Hide Pictures

Go to Top  


Gears - Blanks

Gears - Blanks

Blanks for cutting gears and pulleys and friction drives.


Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Cross Roller Tables - Steel

Linear Slides - Cross Roller Tables - Steel

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Hobby Gears

Hide Pictures

Go to Top  


Hobby Gears - Spur - 48DP

Hobby Gears - Spur - 48DP

A small selection of popular 48DP Plastic/ Metal Pinion and Spur gears

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a 48DP spur gear, divide multiply the no of teeth by 0.52917.

Gears Metric Stem

Hide Pictures

Go to Top  


Gears - Spur - Module 0.5 - Stem

Gears - Spur - Module 0.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.75 - Stem

Gears - Spur - Module 0.75 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 0.8 - Stem

Gears - Spur - Module 0.8 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 1.5 - Stem

Gears - Spur - Module 1.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 1 - Stem

Gears - Spur - Module 1 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2.5 - Stem

Gears - Spur - Module 2.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2 - Stem

Gears - Spur - Module 2 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Hobby Gears

Hide Pictures

Go to Top  


Hobby Gears - Spur - Module 0.4

Hobby Gears - Spur - Module 0.4

A small selection of popular Module 0.4 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.4 spur gear with 20 teeth has a pitch diameter of 8mm. A module 0.4 spur gear with 10 teeth has a pitch diameter of 4mm.

Hobby Gears - Spur - Module 0.5

Hobby Gears - Spur - Module 0.5

A small selection of popular Module 0.5 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.5 spur gear with 20 teeth has a pitch diameter of 10mm. A module 0.5 spur gear with 10 teeth has a pitch diameter of 5mm.

Gears Cluster

Hide Pictures

Go to Top  


Gears - Cluster - 48 Diametrical Pitch

Gears - Cluster - 48 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears - Cluster - 64 Diametrical Pitch

Gears - Cluster - 64 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.