Tape - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for TAPE
Matching Part

SUP-PTFE-TAPE-12X30MTR found in Tape - Fiberglass - PTFE Coated
Width: 12. Length: 30. -: Adhesive backed one side.

Stock: 6


Matching Part

FOAMWEATHERTAPE found in Materials - Foam
Thickness: 6. Sheet Width: 9. Length: 5000.

Backorder



FOUND IN CROSS REFERENCE:- The item was found in our cross reference database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible cross references (other brands) part number matches for TAPE
Cross Referenced Part

TAPEHNG20X50 (MBAOLD) matches TPE-HNG-20-50 found in Tape - Glass Fibre
Width: 20. Length: 50. -: .

Stock: 2


Cross Referenced Part

TAPEM500 (MBAOLD) matches TPE-M500 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Black.

Stock: 5


Cross Referenced Part

TAPEM501 (MBAOLD) matches TPE-M501 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Blue.

Stock: 4


Cross Referenced Part

TAPEM502 (MBAOLD) matches TPE-M502 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Red.

Stock: 4


Cross Referenced Part

TAPEM503 (MBAOLD) matches TPE-M503 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Grey.

Stock: 4


Cross Referenced Part

TAPEM504 (MBAOLD) matches TPE-M504 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Green.

Backorder


Cross Referenced Part

TAPEM505 (MBAOLD) matches TPE-M505 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Orange.

Stock: 3


Cross Referenced Part

TAPEM506 (MBAOLD) matches TPE-M506 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Brown.

Backorder


Cross Referenced Part

TAPEM507 (MBAOLD) matches TPE-M507 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: White.

Stock: 5


Cross Referenced Part

TAPEM508 (MBAOLD) matches TPE-M508 found in Tape - Silicone Wrap
Width: 25. Length: 3. Colour: Yellow.

Stock: 3


Cross Referenced Part

1610X24MMTAPERLOCKBUSH (SKF) matches TLB-1610-24.000MM found in Bushings - Taperlock
Diameter Large End (D): 57.000. Length (L): 25.000. Shaft Size (d): 24.000.

Stock: 2


Cross Referenced Part

1610X28MMTAPERLOCKBUSH (SKF) matches TLB-1610-28.000MM found in Bushings - Taperlock
Diameter Large End (D): 57.000. Length (L): 25.000. Shaft Size (d): 28.000.

Stock: 2


Cross Referenced Part

2012X24MMTAPERLOCKBUSH (SKF) matches TLB-2012-24.000MM found in Bushings - Taperlock
Diameter Large End (D): 70.000. Length (L): 32.000. Shaft Size (d): 24.000.

Stock: 2


Cross Referenced Part

026923M2.5TAPERTAPCS (Sutton) matches TPC-0250-T found in Tools - Taps - Carbon Steel - Hand
Thread Type (Major Diameter): M2.5x0.45 (2.5mm Standard). Pitch / Threads Per Inch: 0.450 mm / 56.44 TPI. Type: Taper.

Stock: 13



Tape

Hide Pictures

Go to Top  


Tape - Double Sided

Tape - Double Sided

Double Sided Foam Tape


Click for combined categories: All Tape


Tape - Fiberglass - PTFE Coated

Tape - Fiberglass - PTFE Coated

Heat Sealer Tape

Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 Deg C to 260 Deg C (-100 to 500 Deg F). Less than 5 percent elongation.

Click for combined categories: All Tape


Tape - Silicone Wrap

Tape - Silicone Wrap

Self fusing silicone wrapping tape for emergency repairs or general protection. Seals leaks. Permanent. Self Bonding. No adhesive. Supa Tape.

Resists Fuels, Oils, Acid, Solvent, Salt Water, Road Salt and UV Rays. Temp Range minus 50 deg C to plus 260 deg C. Insulates 8000 Volts (per unstretched layer). Tensile Strength 700psi. Lasts for years with a permanent air tight and water tight seal. Some uses include emergency radiator hose repair, insulation for radioactive areas, garden hose repair, exhaust pipe repair, electrical insulation, tool grips, sporting grips, rope ends, air duct joints, wire bundles. Areas of use include outdoor, auto, marine, workshop, motorcycle, camper, hunting, fishing, farming, plumbing, corrosive areas.

Click for combined categories: All Tape


Tape - Glass Fibre

Tape - Glass Fibre

Hinge tape and other uses


Click for combined categories: All Tape


Pins - Taper

Hide Pictures

Go to Top  


Pins - Taper - Imperial - Miniature

Pins - Taper - Imperial - Miniature

Imperial Sizes 1:48 Taper (1/4 in. per foot). Miniature sizes. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Pins - Taper - Imperial - Standard

Pins - Taper - Imperial - Standard

Imperial Sizes 1:48 Taper (1/4 in. per foot). Standard sizes numbers 0 to 14. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Pins - Taper - Metric

Pins - Taper - Metric

Metric Sizes 1:50 Taper

Metric Sizes to DIN 1.

Click for combined categories: All Metric Taper Pins

Related Information:
Miniature Imperial Taper Pin Sizes


Pins - Taper - Metric - Extractable - Internal Thread

Pins - Taper - Metric - Extractable - Internal Thread

1:50 Taper.

DIN 7978. Mild Steel.

Click for combined categories: All Metric Taper Pins


Bearings Tapered Roller

Hide Pictures

Go to Top  


Bearings - Tapered Roller - Single Row - Metric

Bearings - Tapered Roller - Single Row - Metric

Includes cup and cone


Bearings Automotive

Hide Pictures

Go to Top  


Bearings - Tapered Roller - Single Row - Inch Sets

Bearings - Tapered Roller - Single Row - Inch Sets

Common automotive sets include cup and cone


Clamping Bushings

Hide Pictures

Go to Top  


Bushings - Taperlock

Bushings - Taperlock


Plungers Ball

Hide Pictures

Go to Top  


Sleeves - Tapered - Precision Indexing Plunger

Sleeves - Tapered - Precision Indexing Plunger

Use with precision indexing plungers and locking bolts


Click for combined categories: All Sleeves for Plungers


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Tapered Fit - Finserts - For Wood and Plastics

Inserts - Tapered Fit - Finserts - For Wood and Plastics

Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout.

Locking Bushings

Hide Pictures

Go to Top  


Bushings - Integral Taper

Bushings - Integral Taper

Stainless Steel Taper Bushings.

Will not mar shafts.

Click for combined categories: All Locking Bushings


Knobs Oval

Hide Pictures

Go to Top  


Knobs - Oval Tapered - Press On - Phenolic

Knobs - Oval Tapered - Press On - Phenolic

Press on knobs hold on securely without threads or set screws

Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.

Click for combined categories: All Oval Knobs

Click for combined categories: All Knobs


Cable Ties

Hide Pictures

Go to Top  


Velcro - One Wrap Tape

Velcro - One Wrap Tape

One wrap tape is a single tape with hooks on one side and loops on the other. Used for quick flexible secure and reusable cable management.


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Sprockets - 12.7 x 7.75mm - Duplex  Metal - Taperlock

Sprockets - 12.7 x 7.75mm - Duplex Metal - Taperlock

Match with 12.70x7.75mm duplex chain (08B-2 BS)

Taperlock bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 25.40 x 17.02mm - Duplex  Metal - Taperlock

Sprockets - 25.40 x 17.02mm - Duplex Metal - Taperlock

Match with 25.40x17.02mm duplex steel chain (16B-2 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 16B - 1 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Bungs

Hide Pictures

Go to Top  


Bungs and Caps - Reversible - Round

Bungs and Caps - Reversible - Round

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Click for combined categories: All Bungs

Related Information:
Round Bungs


Keys and Keysteel

Hide Pictures

Go to Top  


Keys - Gib Head - Steel

Keys - Gib Head - Steel

Tapered 3.000 mm per 300 mm (1:100).

Click for combined categories: All Gib Head Keys


Keys - Gib Head - Zinc Plated

Keys - Gib Head - Zinc Plated

Tapered 3.000 mm per 300 mm (1:100).

Click for combined categories: All Gib Head Keys


Tools Threading

Hide Pictures

Go to Top  


Tools - Taps - High Speed Steel - NPT Pipe

Tools - Taps - High Speed Steel - NPT Pipe

Taper Pipe Taps


Click for combined categories: All Taps

Click for combined categories: All Tools


Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Tools - Taps - High Speed Steel - NPT Pipe - Interrupted

Taper Pipe Taps


Click for combined categories: All Taps

Click for combined categories: All Tools


Hoist Rings

Hide Pictures

Go to Top  


Washers - Bevel

Washers - Bevel

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.

Click for combined categories: All Hoist Rings


Tools Threading

Hide Pictures

Go to Top  


Tools - Taps - Carbon Steel - Hand - Sets

Tools - Taps - Carbon Steel - Hand - Sets

Carbon Steel tap sets including taper, intermediate and bottoming tap in each set

Carbon steel hand taps.

Click for combined categories: All Taps

Click for combined categories: All Tools


Circlips

Hide Pictures

Go to Top  


Circlips - External - Grooveless

Circlips - External - Grooveless

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA.

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Click for combined categories: All External Circlips


Linear Slides

Hide Pictures

Go to Top  


Slides - Dovetail

Slides - Dovetail

Used for work feeders for production milling, positioning fixutres, work holding devices, checking fixtures, shuttle devices, assembly equipment, etc.

Tapered gibs are adjusted with a single screw that moves the gib on the taper. This type remains parallel and wears less as it occurs over the entire surface. Made of continuous cast GS 40,000 PSI pearlitic grey iron. Able to be milled, drilled, tapped, etc.

Click for combined categories: All Linear Slides


Pins - Dowel

Hide Pictures

Go to Top  


Pins - Groove

Pins - Groove

Non threaded press fit fastener that doesn't require a reamed hole as do dowel pins.Commonly used in place of taper pins.

An economic method of fastening without the need for precision drilled and reamed holes. Recommended hole tolerance is H11. Total length may be slightly longer than the nominal length. Expanded portion of the pin is compressed into the hole a few thousands of an inch wider than the nominal pin diameter. Radial forces lock the pin securely into the drilled hole.

Tips

Hide Pictures

Go to Top  


Tips - Round

Tips - Round

Plastic tips fit over outside of tubing.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.

Protective Packing and Sleeves

Hide Pictures

Go to Top  


Sleeving - Mesh

Sleeving - Mesh

Low cost protection for exterior threaded and cylindrical parts

Elastic snug tight fit on straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155385 products in 3606 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.