Categories for: strips
Self-Lube wearstrips provide effective and economical means of controlling and guiding linear motions, especially in large load applications.
Made of solid aluminum bronze with self-lubricating graphite plugs. Furnished semi-finished and are able to be cut to size and finished. Plugs are 25.4mm centres. Drill mounting holes either between or through graphite plugs. Before drilling break out graphite.
Self-Lube wearstrips provide effective and economical means of controlling and guiding linear motions, especially in large load applications.
Made of solid aluminum bronze. Furnished semi-finished and are able to be cut to size and finished.
For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.
300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.
Airmovers amplify air flow from a small supply of compressed air. Terrific for fume or smoke extraction or to move large volumes of light weight materials.
Aluminium / Zinc Plated Steel.
Brass shim sheet. From very thin foil to thick sizes.
NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Includes sheets and rolls. See Brass - Strip for thin strips.
Bushes - Stainless Steel and PTFE - Flanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) containing a mixture of inorganic filers and special polymer fibre
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.
Bushes - Stainless Steel and PTFE - Unflanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) containing a mixture of inorganic filers and special polymer fibre
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.
Bushes - Steel - DP4 Type - Flanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) containing a mixture of inorganic filers and special polymer fibre
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.
Bushes - Steel - DP4 Type - Unflanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) containing a mixture of inorganic filers and special polymer fibre
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.
Bushes - Steel - DUB Type - Flanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) and lead bearing material.
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Maximum Load 140N/mm2. Requires no lubrication, Maintenance free operation, Exhibits low wear rate, Seizure resistant, High Static and Dynamic Load capacity. Good Frictional properties with negligible stick-slip, Resists Solvents, No water absorption, Compact and light. Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments.
Bushes - Steel - DUB Type - Unflanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) and lead bearing material.
Operating Temperature -200 Degrees to 280 Degrees Celsius. Maximum load 140N/mm2. Requires no lubrication, Maintenance free operation, Exhibits low wear rate, Seizure resistant, Resists Solvents. Good frictional properties with negligible stick-slip, Water absorption, Compact and Light, High Static and Dynamic Load capacity. Electrically conductive and shows no electrostatic effects. Good embedability and is tolerant of dusty environment.
Bushes - Steel - DU Type - Flanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) and lead bearing material.
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Maximum Load 250N/mm2. Requires no lubrication, Maintenance free operation, Exhibits low wear rate, Seizure resistant, Resists Solvents. High Static and Dynamic Load capacity, Compact and light, Good friction properties with negligible stick-slip. No water absorption. Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments.
Bushes - Steel - DU Type - Unflanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) and lead bearing material.
Operating Temperature -200 Degrees to 280 Degrees Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments.
Bushes - Steel - DX Type - Unflanged
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with pigmented acetal copolymer bearing material.
Opertating temperature -40 Degrees to 120 Degress Celsius. Provides mainteance free operation. Exhibits low wear rate. Seizure resistant. High Static and Dynamic Load capacity. Good frictional properties, No water absorption, Compact and Light, Suitable for rotating, oscillating, reciprocating and sliding movements.
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) containing a mixture of inorganic filers and special polymer fibre
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.
Composite bearing material consisting of 3 bonded layers. Steel backing strip bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE) and lead bearing material.
Operating temperature - 200 Degrees to 280 degrees celsius. Maximum load 250N per mm2. Requires no lubrication. Provides maintenance free operaton. Exhibits low wear rate. Seizure resistant. High static and dynamic load capacity, Good frictional properties with negligible stick-slip. Resists solvents. No water absorption. Electrically conductive and shows no electrostatic effects. Compact and light. Good embedability and is tolerant of dusty environments.
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with pigmented acetal copolymer bearing material.
Operating temperature -40 Degrees to 120 Degrees Celsius. Provides maintainance free operation. Exhibits low wear rate. Seizure resistant. High Static and Dynamic Load capacity. Good frictional prperties, No water absorption, Compact and Light, Suitable for rotating, oscillating, reiprocating and sliding movements.
Washers - Thrust - Stainless Steel and PTFE
Composite bearing material conisting of 3 bonded layers; Steel backing strip bonded with porous sinter bronze interlayer which is impregnated and overlaid with polytetrafluroethylene(PTFE) containing a mixture of inorganic filers and special polymer fibre
Operating Temperature -200 Degrees to 280 Degrees Celsuis. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.
Magnetic Vinyl Sheets and Magnetic Rubber Strip
Thin and thick Aluminum strip and rectangular profiles
Small sizes may not be perfectly straight.
Thin and thick brass strip and rectangular profiles
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small sizes may not be perfectly straight.
Seals - Trim - Push On - EPDM with Steel Core
Weatherstrip and trim by simply pushing over raw edges.
Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)
Recommended that nylon coating is stripped prior to swaging. Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum.Too many choices?
You have selected to see ALL categories including any of the following words: strips
Click here to see ONLY THE MOST POPULAR categories including any of the following words: strips
|
| |||||||||||||||||||||||||
| Select all items starting with... | |||||||||||||||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Or use the category search | ||||||||||||||||
|
| |||||||||||||||||||||||||
