Square Washers - Small Parts And Bearings Categories


Washers Square

Hide Pictures

Go to Top  


Washers - Square - Heavy Duty - 304 Stainless Steel

Washers - Square - Heavy Duty - 304 Stainless Steel


Click for combined categories: All Square Washers


Washers - Square - Heavy Duty - Steel

Washers - Square - Heavy Duty - Steel


Click for combined categories: All Square Washers


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Components - Hardened Steel

Washers - Self Aligning - Components - Hardened Steel

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers - Self Aligning - Components - Stainless Steel

Washers - Self Aligning - Components - Stainless Steel

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 2 Wave Type

Washers - Spring - 2 Wave Type

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - 302 Stainless Steel

Washers - Spring - 3 Wave Type - 302 Stainless Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - 400 Grade Stainless

Washers - Spring - 3 Wave Type - 400 Grade Stainless

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - Berryllium Copper

Washers - Spring - 3 Wave Type - Berryllium Copper

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - Spring Steel

Washers - Spring - 3 Wave Type - Spring Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - Curved - Spring Steel

Washers - Spring - Curved - Spring Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers - Spring - Curved - Stainless Steel

Washers - Spring - Curved - Stainless Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Sets - Hardened Steel

Washers - Self Aligning - Sets - Hardened Steel

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers - Self Aligning - Sets - Stainless Steel

Washers - Self Aligning - Sets - Stainless Steel

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Carbon Spring Steel - Precision Shim

Washers - Flat - Carbon Spring Steel - Precision Shim

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gamg cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - PTFE

Washers - Flat - PTFE

Teflon Washers

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers Thrust

Hide Pictures

Go to Top  


Washers - Thrust - DP4 Type

Washers - Thrust - DP4 Type

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.

Click for combined categories: All Thrust Washers


Washers Finishing

Hide Pictures

Go to Top  


Washers - Cup - Nylon

Washers - Cup - Nylon

Countersunk washers for use with screws for decorative finishing


Click for combined categories: All Cup Washers


Washers - Cup - Stainless Steel

Washers - Cup - Stainless Steel

For countersunk screws.

Stainless Steel cup washers.

Click for combined categories: All Cup Washers


Washers - Cup - Steel - Nickel Plated

Washers - Cup - Steel - Nickel Plated

Countersunk washers for use with screws for decorative finishing


Click for combined categories: All Cup Washers


Washers Flat Fibre

Hide Pictures

Go to Top  


Washers - Flat - Fibre

Washers - Flat - Fibre

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 Deg C. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - C - 303 Stainless Steel

Washers - C - 303 Stainless Steel

Knurled outside edge


Click for combined categories: All C Washers


Washers - C - Steel

Washers - C - Steel

Cold finished steel, case hardened with a black oxide finish.


Click for combined categories: All C Washers


Washers - C - Swing

Washers - C - Swing

Cold finished steel, hardened and ground. Black oxide finish.


Washers - Flat - Aluminium

Washers - Flat - Aluminium

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Bonded Neoprene

Washers - Flat - Bonded Neoprene

Galvanised sealing washers with neoprene centre for use with self drilling screws

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Commercial

Washers - Flat - Brass - Commercial

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Precision

Washers - Flat - Brass - Precision

Precision Tolerances. Laminated brass shim washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Hardened Steel

Washers - Flat - Hardened Steel

Medium carbon steel through hardened to RC 43-49. Zinc dichromate finish. All dimensions shows are minimum.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - High Tensile

Washers - Flat - High Tensile

Grade 8 high tensile washers

ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Mild Steel

Washers - Flat - Mild Steel

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Sintered Bronze - Precision

Washers - Flat - Sintered Bronze - Precision

Flat thrust washers made from oil impregnated sintered bronze

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Commercial

Washers - Flat - Stainless Steel - Commercial

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Precision Ground

Washers - Flat - Stainless Steel - Precision Ground

Non magnetic and corrosion resistant. Sides are flat and parallel to within 0.025mm (0.001 in.)

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Precision Shim

Washers - Flat - Stainless Steel - Precision Shim

Precision Tolerances.


Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stamped - Heavy Duty - Hardened

Washers - Flat - Stamped - Heavy Duty - Hardened

Heat treated. Black oxide finish.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Titanium - CP Grade 1

Washers - Flat - Titanium - CP Grade 1

Flat washers. CP Grade 1 Titanium.

CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Heavy Duty - Machined - Stainless Steel

Washers - Heavy Duty - Machined - Stainless Steel

303 Stainless Steel

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Heavy Duty - Machined - Steel

Washers - Heavy Duty - Machined - Steel

Case hardened cold finished steel with black oxide finish.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - Nylon

Washers - Flat - Nylon

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers - Flat - PVC

Washers - Flat - PVC

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers Flat Rubber

Hide Pictures

Go to Top  


Washers - Flat - Rubber

Washers - Flat - Rubber

Nitrile Duro 70

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - External Tooth - Spring Steel

Washers - Lock - External Tooth - Spring Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - External Tooth - Stainless Steel

Washers - Lock - External Tooth - Stainless Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Spring Steel

Washers - Lock - Internal Tooth - Spring Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Stainless Steel

Washers - Lock - Internal Tooth - Stainless Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Grade 8

Washers - Lock - Split - Grade 8

Zinc plated


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Stainless Steel

Washers - Lock - Split - Stainless Steel

304 Grade Stainless Steel


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Steel

Washers - Lock - Split - Steel

Plain and zinc plated

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Titanium

Washers - Lock - Split - Titanium

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Tabbed - Heavy Duty

Washers - Lock - Tabbed - Heavy Duty

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Washers Locking

Hide Pictures

Go to Top  


Washers - Serrated - Safety

Washers - Serrated - Safety

Spring Steel Hardened Black.

Click for combined categories: All Serrated Locking Washers


Washers Serrated Locking

Hide Pictures

Go to Top  


Washers - Disk Lock

Washers - Disk Lock

Also see Nord Lock and Lockrite washers

Stainless Grade Grade A2 302/316 18-8. Vibration-proof self tightening structural locking device. Maximum Working Temp: +430oC. DISC-LOCK(R) has outperformed all other types of loose, washered, threaded or pinned systems. in a wide range of high stress, corrosive, and vibration sensitive applications.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers - LockRite

Washers - LockRite

Supplied in pairs.

Also see Nordlock and Disk Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers - Nord Lock - 316 Stainless

Washers - Nord Lock - 316 Stainless

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers - Nord Lock - Zinc Plated

Washers - Nord Lock - Zinc Plated

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers Shoulder

Hide Pictures

Go to Top  


Washers - Shoulder - Nylon

Washers - Shoulder - Nylon


Click for combined categories: All Shoulder Washers


Plungers Ball

Hide Pictures

Go to Top  


Washers - for Indexing Pull Knobs

Washers - for Indexing Pull Knobs

The washer is slid beneath the disengaged pull knob so that the follower pins engage in the slot.


Click for combined categories: All Indexing Plungers

Related Information:
Plungers to Suit with Locknut


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Ball Bearing Type

Washers - Disc Spring - Ball Bearing Type

Specially designed for preloading ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Carbon Steel

Washers - Disc Spring - Carbon Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Flange Locking Type

Washers - Disc Spring - Flange Locking Type

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Plastic

Washers - Disc Spring - Plastic

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Stainless Steel

Washers - Disc Spring - Stainless Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Hoist Rings

Hide Pictures

Go to Top  


Washers - Bevel

Washers - Bevel

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.

Click for combined categories: All Hoist Rings


Bar

Hide Pictures

Go to Top  


Square Bar - 303 Stainless

Square Bar - 303 Stainless

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Brass

Square Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Carbon Steel

Square Bar - Carbon Steel

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Urethane

Square Bar - Urethane

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.

Click for combined categories: All Square Bar


Sleeves

Hide Pictures

Go to Top  


Sleeves - Square Hole - Plain - Carbon Steel

Sleeves - Square Hole - Plain - Carbon Steel

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Click for combined categories: All Square Hole Sleeves


Sleeves - Square Hole - Plain - Hardened

Sleeves - Square Hole - Plain - Hardened

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Click for combined categories: All Square Hole Sleeves


Sleeves - Square Hole - Threaded - Carbon Steel

Sleeves - Square Hole - Threaded - Carbon Steel

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


Click for combined categories: All Square Hole Sleeves


Tube and Tubing

Hide Pictures

Go to Top  


Tube - Square - Carbon Fibre - Square Hole

Tube - Square - Carbon Fibre - Square Hole

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Non Metallic Tube


Fastening Bushings

Hide Pictures

Go to Top  


Bushings - Square Hole

Bushings - Square Hole

4140 Alloy Steel - Hardened (Rc 40-43).

Nuts

Hide Pictures

Go to Top  


Nuts - Square - Machine Screw

Nuts - Square - Machine Screw

For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards


Spacers

Hide Pictures

Go to Top  


Spacers - Square - Threaded

Spacers - Square - Threaded

Threaded spacers.


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Square

Balsa Wood - Square

Square section in longer lengths 900mm plus. See block for short lengths.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Bungs

Hide Pictures

Go to Top  


Bungs - Square

Bungs - Square

Plastic bungs fit inside square tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Click for combined categories: All Bungs

Related Information:
Square Bungs


Bungs - Square - Threaded

Bungs - Square - Threaded


Click for combined categories: All Bungs


Tube and Tubing

Hide Pictures

Go to Top  


Tube - Square - Aluminium

Tube - Square - Aluminium

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube


Tube - Square - Brass

Tube - Square - Brass

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube


Tube - Square - Carbon Fibre - Round Hole

Tube - Square - Carbon Fibre - Round Hole

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Non Metallic Tube


Bumpers

Hide Pictures

Go to Top  


Bumpers - Square and Rectangle

Bumpers - Square and Rectangle

With drilled and counterbored holes for mounting. Neoprene only, no steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Bumpers - Square and Rectangle - Steel Plated - Neoprene

Bumpers - Square and Rectangle - Steel Plated - Neoprene

With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Bumpers - Square and Rectangle - Steel Plated - Urethane

Bumpers - Square and Rectangle - Steel Plated - Urethane

With drilled and counterbored holes for mounting. Urethane bonded to steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Square Shaft

Hide Pictures

Go to Top  


Shafting - Linear - Square

Shafting - Linear - Square


Dental Handpiece Parts

Hide Pictures

Go to Top  


Several Dental Washers Parts

Several Dental Washers Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Washers Only - Chrome Steel

Bearings - Thrust - Ball - Washers Only - Chrome Steel

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Square - Miniature

Housings - Bearing - Square - Miniature

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Screws Hex Head

Hide Pictures

Go to Top  


Screws - Hex Washer Head - Black Nylon

Screws - Hex Washer Head - Black Nylon

1/4 UNC and UNF only

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Click for combined categories: All Machine Screws

Click for combined categories: All Plastic Screws


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square

Housings - Linear - Square

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Click for combined categories: All Linear Bearing Housings


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square - Clamps

Housings - Linear - Square - Clamps


Click for combined categories: All Linear Bearing Housings


Keys and Keysteel

Hide Pictures

Go to Top  


Keysteel Lengths - Square - Brass

Keysteel Lengths - Square - Brass

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Carbon Steel

Keysteel Lengths - Square - Carbon Steel

Plain carbon steel keysteel

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Stainless Steel

Keysteel Lengths - Square - Stainless Steel

303, 304 and 316 grade

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Zinc Plated

Keysteel Lengths - Square - Zinc Plated

Zinc plated carbon steel keysteel

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Mounts Cylindrical

Hide Pictures

Go to Top  


Mounts - Cylindrical - Square

Mounts - Cylindrical - Square

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.

Click for combined categories: All Cylindrical Mounts


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Roller - Washers

Bearings - Thrust - Roller - Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - Cast Iron

Housings - Bearing - Flanged - Square - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Square - Plastic

Housings - Bearing - Flanged - Square - Plastic

Use with steel, plastic or stainless steel bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Other Bearings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - W300

Housings - Bearing - Flanged - Square - W300

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 Deg C to +180 Deg C.

Click for combined categories: All Housings with Integral Bearing



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155385 products in 3606 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.