All Items: Square Mounts - Categories


Mounts Square

Hide Pictures

Go to Top  


Mounts - Square

Mounts - Square

Vibration dampening

Fastener may be steel, brass or zinc plated. Natural rubber isolator.

Mounts Cylindrical

Hide Pictures

Go to Top  


Mounts - Cylindrical - Square

Mounts - Cylindrical - Square

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.

Click for combined categories: All Cylindrical Mounts


Latches

Hide Pictures

Go to Top  


Handles - Latching - T-Handle - Folding

Handles - Latching - T-Handle - Folding

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.


Bumpers

Hide Pictures

Go to Top  


Bumpers - Square and Rectangle

Bumpers - Square and Rectangle

With drilled and counterbored holes for mounting. Neoprene only, no steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Bumpers - Square and Rectangle - Steel Plated - Neoprene

Bumpers - Square and Rectangle - Steel Plated - Neoprene

With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Bumpers - Square and Rectangle - Steel Plated - Urethane

Bumpers - Square and Rectangle - Steel Plated - Urethane

With drilled and counterbored holes for mounting. Urethane bonded to steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Mounts Machinery

Hide Pictures

Go to Top  


Mounts - Neoprene Pads - Ribbed Pattern

Mounts - Neoprene Pads - Ribbed Pattern

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.

Click for combined categories: All Mounting Pads


Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Square - Bolt On

Suspension Units - Rubber - Square - Bolt On

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Square - Insert Type

Suspension Units - Rubber - Square - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Bar

Hide Pictures

Go to Top  


Square Bar - 303 Stainless

Square Bar - 303 Stainless

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Brass

Square Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Carbon Steel

Square Bar - Carbon Steel

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Urethane

Square Bar - Urethane

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.

Click for combined categories: All Square Bar


Bearings Grooved Profile

Hide Pictures

Go to Top  


Bearings - Square Groove Profile OD

Bearings - Square Groove Profile OD

Special bearings. Not readily available.


Fastening Bushings

Hide Pictures

Go to Top  


Bushings - Square Hole

Bushings - Square Hole

4140 Alloy Steel - Hardened (Rc 40-43).

Nuts

Hide Pictures

Go to Top  


Nuts - Square - Machine Screw

Nuts - Square - Machine Screw

For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards


Sleeves

Hide Pictures

Go to Top  


Sleeves - Square Hole - Plain - Carbon Steel

Sleeves - Square Hole - Plain - Carbon Steel

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Click for combined categories: All Square Hole Sleeves


Sleeves - Square Hole - Plain - Hardened

Sleeves - Square Hole - Plain - Hardened

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Click for combined categories: All Square Hole Sleeves


Sleeves - Square Hole - Threaded - Carbon Steel

Sleeves - Square Hole - Threaded - Carbon Steel

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


Click for combined categories: All Square Hole Sleeves


Spacers

Hide Pictures

Go to Top  


Spacers - Square - Threaded

Spacers - Square - Threaded

Threaded spacers.


Washers Square

Hide Pictures

Go to Top  


Washers - Square - Heavy Duty - 304 Stainless Steel

Washers - Square - Heavy Duty - 304 Stainless Steel


Click for combined categories: All Square Washers


Washers - Square - Heavy Duty - Steel

Washers - Square - Heavy Duty - Steel


Click for combined categories: All Square Washers


Washers - Square - Standard Duty - Galvanised

Washers - Square - Standard Duty - Galvanised


Click for combined categories: All Square Washers


Washers - Square - Standard Duty - Plain

Washers - Square - Standard Duty - Plain


Click for combined categories: All Square Washers


Bungs

Hide Pictures

Go to Top  


Bungs - Square

Bungs - Square

Plastic bungs fit inside square tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Click for combined categories: All Bungs

Related Information:
Square Bungs


Bungs - Square - Threaded

Bungs - Square - Threaded


Click for combined categories: All Bungs


Tube and Tubing

Hide Pictures

Go to Top  


Tube - Square - Aluminium

Tube - Square - Aluminium

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube


Tube - Square - Brass

Tube - Square - Brass

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube


Tube - Square - Carbon Fibre - Round Hole

Tube - Square - Carbon Fibre - Round Hole

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Non Metallic Tube


Tube - Square - Carbon Fibre - Square Hole

Tube - Square - Carbon Fibre - Square Hole

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Non Metallic Tube


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Square - Miniature

Housings - Bearing - Square - Miniature

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square

Housings - Linear - Square

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Click for combined categories: All Linear Bearing Housings


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square - Clamps

Housings - Linear - Square - Clamps


Click for combined categories: All Linear Bearing Housings


Square Shaft

Hide Pictures

Go to Top  


Shafting - Linear - Square

Shafting - Linear - Square


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Square

Balsa Wood - Square

Square section in longer lengths 900mm plus. See block for short lengths.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Keys and Keysteel

Hide Pictures

Go to Top  


Keysteel Lengths - Square - Brass

Keysteel Lengths - Square - Brass

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Carbon Steel

Keysteel Lengths - Square - Carbon Steel

Plain carbon steel keysteel

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Stainless Steel

Keysteel Lengths - Square - Stainless Steel

303, 304 and 316 grade

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Zinc Plated

Keysteel Lengths - Square - Zinc Plated

Zinc plated carbon steel keysteel

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - Cast Iron

Housings - Bearing - Flanged - Square - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - W300

Housings - Bearing - Flanged - Square - W300

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.

Click for combined categories: All Housings with Integral Bearing


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Metric - Square - Metallic

Leadscrew Nuts - Metric - Square - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Square - Clamps

Suspension Units - Rubber - Square - Clamps

Steel painted construction. For longer units two or more clamps are recommended. Welding any adaption parts on ROSTA rubber suspension units is NOT RECOMMENDED. Bolts not supplied. Clamp type BR for square suspension units DRS and DRA.

Click for combined categories: All Suspension Units


Screws Security

Hide Pictures

Go to Top  


Screws - Security - Post Combi Square - Pan Head - Super Zinc

Screws - Security - Post Combi Square - Pan Head - Super Zinc

Each 200 pack comes with a Post Combination Driver Bit. Metric only.

Use special tool listed under Screws - Securty - Socket - Tools.

Click for combined categories: All Security Screws


Screws - Security - Post Combi Square - Tools

Screws - Security - Post Combi Square - Tools

Metric only.

Used for two hole security screws.

Click for combined categories: All Security Screws


Screws Square Head

Hide Pictures

Go to Top  


Screws - Set - Cup Point - Square Head

Screws - Set - Cup Point - Square Head

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws - Set - Dog Point - Square Head

Screws - Set - Dog Point - Square Head

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Pins - Wirelock

Hide Pictures

Go to Top  


Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Block

Balsa Wood - Block

Rectangular and square section short lengths.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Latches

Hide Pictures

Go to Top  


Handles - Tee

Handles - Tee

Zinc plated steel 7.94mm (5/16in.) square shank.


Latches - Toolbox

Latches - Toolbox

Zinc finished steel accepts 7.94mm (5/16in.) square shank.


Handles - Latching - Cab Locks

Handles - Latching - Cab Locks

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.


Handles - Latching - Padlocking

Handles - Latching - Padlocking

Zinc finished iron/steel construction. Has 5/16in. Square shank.


Linear Slides

Hide Pictures

Go to Top  


Linear Slide Assemblies - Plain - Low Profile - High Load

Linear Slide Assemblies - Plain - Low Profile - High Load

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.

Click for combined categories: All Linear Slide Assemblies


Keys and Keysteel

Hide Pictures

Go to Top  


Keys - Machine - Carbon Steel

Keys - Machine - Carbon Steel

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Click for combined categories: All Machine Keys


Keys - Machine - Stainless Steel

Keys - Machine - Stainless Steel

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Click for combined categories: All Machine Keys


Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Round - Bolt On

Suspension Units - Rubber - Round - Bolt On

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Round - Insert Type

Suspension Units - Rubber - Round - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Latches

Hide Pictures

Go to Top  


Handles - Latching - 2-Point Locking Rod Kit

Handles - Latching - 2-Point Locking Rod Kit

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty

Springs - Die - Imperial - Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty

Springs - Die - Imperial - Medium Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Extra Heavy Duty

Springs - Die - Imperial - Extra Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium-Heavy Duty

Springs - Die - Imperial - Medium-Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Ball Screws

Hide Pictures

Go to Top  


Mounts - Universal - For Acme Thread and Ball Screws

Mounts - Universal - For Acme Thread and Ball Screws

Use grade 8 hex socket head cap screws for mounting.


Isolators

Hide Pictures

Go to Top  


Mounts - Vibration - Isolation - Compression - Stainless Steel

Mounts - Vibration - Isolation - Compression - Stainless Steel

Compression shear mounts for harsh environments.

Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.

Click for combined categories: All Base Mounts


Mounts - Vibration - Isolation - Cup Style 2

Mounts - Vibration - Isolation - Cup Style 2

Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.

High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.

Click for combined categories: All Cup Mounts


Mounts - Vibration - Isolation Pads - Compression Shear

Mounts - Vibration - Isolation Pads - Compression Shear

Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.

Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.

Click for combined categories: All Isolation Pad Mounts


Mounts - Vibration - Isolation Pads - General Purpose

Mounts - Vibration - Isolation Pads - General Purpose

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.

Click for combined categories: All Isolation Pad Mounts


Isomounts

Hide Pictures

Go to Top  


Mounts - Isomounts

Mounts - Isomounts

Adjustable Height.

Screw and base sold separately. Order both parts for a complete unit. Designed for efficient and economic installation of a wide range of machinery. Machines can be installed rapidly and economically without bolting down. Absorb both shock and vibration within the machine and protect machines from external disturbances. Height of adjustment is through a levelling screw passing through machine foot into tapped bush in steel cover.

Mounts Base

Hide Pictures

Go to Top  


Mounts - Base - Heavy Duty

Mounts - Base - Heavy Duty

Stainless Steel Mesh. Suitable for corrosive environments. For loads of 35 to 725 kgf.

Click for combined categories: All Base Mounts


Mounts - Base - Neoprene - Style 1

Mounts - Base - Neoprene - Style 1

Threaded plate moulded into mounting. Non skid base and top surface. Type 2 has fastening slots for easy installation.

Click for combined categories: All Base Mounts


Mounts - Base - Neoprene - Style 2

Mounts - Base - Neoprene - Style 2


Click for combined categories: All Base Mounts


Mounts Bonded

Hide Pictures

Go to Top  


Mounts - Bonded

Mounts - Bonded


Click for combined categories: All Bonded Mounts


Mounts - Bonded - Two Piece

Mounts - Bonded - Two Piece

Steel insert overcoated with rubber joins the two pieces.

Click for combined categories: All Bonded Mounts


Mounts Centrebolt

Hide Pictures

Go to Top  


Mounts - Centre Bolt - Solo Unitised

Mounts - Centre Bolt - Solo Unitised

Vibration dampening

Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.

Click for combined categories: All Centrebolt Mounts


Mounts - Centre Bolt - Tandem Unitised

Mounts - Centre Bolt - Tandem Unitised

Vibration dampening

Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.

Click for combined categories: All Centrebolt Mounts


Mounts Conical

Hide Pictures

Go to Top  


Mounts - Cone - Delrin

Mounts - Cone - Delrin


Click for combined categories: All Conical Mounts


Mounts - Conical

Mounts - Conical

Vibration dampening


Click for combined categories: All Conical Mounts


Mounts Cup

Hide Pictures

Go to Top  


Mounts - Cupmounts - Industrial

Mounts - Cupmounts - Industrial

Protext against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.

Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.

Click for combined categories: All Cup Mounts


Mounts - Vibration Isolation - Cup Style 1

Mounts - Vibration Isolation - Cup Style 1

Vibration dampening


Click for combined categories: All Cup Mounts


Mounts Cylindrical

Hide Pictures

Go to Top  


Mounts - Anti-Vibration - 303 Stainless Steel

Mounts - Anti-Vibration - 303 Stainless Steel

Corrosion resistant designed with high grade nitrile rubber and stainless steel.

Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Mounts - Anti-Vibration - Zinc Plated Steel

Mounts - Anti-Vibration - Zinc Plated Steel

Designed with high grade nitrile rubber and zinc plated steel.

Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.

Mounts - Compression

Mounts - Compression

Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.

Made with durable oil and ozone resistant neoprene. No special tools required for installation.

Mounts - Cylindrical - Female to Blank

Mounts - Cylindrical - Female to Blank

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Click for combined categories: All Cylindrical Mounts

Related Information:
Urethane Mounts Loads and Stiffness

Rubber Mounts Forcing Frequencies


Mounts - Cylindrical - Female to Female

Mounts - Cylindrical - Female to Female

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Click for combined categories: All Cylindrical Mounts

Related Information:
Urethane Mounts Loads and Stiffness

Rubber Mounts Forcing Frequencies


Mounts - Cylindrical - Male to Blank - Concave Top

Mounts - Cylindrical - Male to Blank - Concave Top

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Click for combined categories: All Cylindrical Mounts

Related Information:
Urethane Mounts Loads and Stiffness

Rubber Mounts Forcing Frequencies


Mounts - Cylindrical - Male to Blank - Conical

Mounts - Cylindrical - Male to Blank - Conical

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Click for combined categories: All Cylindrical Mounts


Mounts - Cylindrical - Male to Blank - Flat Top

Mounts - Cylindrical - Male to Blank - Flat Top

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Click for combined categories: All Cylindrical Mounts

Related Information:
Urethane Mounts Loads and Stiffness

Rubber Mounts Forcing Frequencies


Mounts - Cylindrical - Male to Female

Mounts - Cylindrical - Male to Female

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Click for combined categories: All Cylindrical Mounts

Related Information:
Urethane Mounts Loads and Stiffness

Rubber Mounts Forcing Frequencies


Mounts - Cylindrical - Male to Male

Mounts - Cylindrical - Male to Male

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Click for combined categories: All Cylindrical Mounts

Related Information:
Urethane Mounts Loads and Stiffness

Rubber Mounts Forcing Frequencies


Mounts - Cylindrical - Special Purpose

Mounts - Cylindrical - Special Purpose

Vibration dampening


Click for combined categories: All Cylindrical Mounts


Mounts Finger Flex

Hide Pictures

Go to Top  


Mounts - Finger Flex Assemblies

Mounts - Finger Flex Assemblies

Cadmium Plated Steel Housing. Natural Rubber Isolators. Natural Frequency 6-30 Hz.

Mounts Leveling

Hide Pictures

Go to Top  


Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad

Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad

These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

303 Stainless Steel. Nylon pad for glide applications.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad

Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad

These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

303 Stainless Steel. Elastomer pad for non skid applications.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Anti-Vibration - Studded Type

Mounts - Leveling - Anti-Vibration - Studded Type

Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery.

15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Base Type - Round

Mounts - Leveling - Base Type - Round

For loads of 45 to 5350 kg.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling Carry - Ball Type

Mounts - Leveling Carry - Ball Type

Vibration Dampening with retractable ball for movement.

Carry mount is a moveable mount in which the rubber mount is incorporated with a rotating ball. Allows movement of machines and provides vibration dampening. Simply turn the adjusting hole with a screwdriver to lift or lower the ball.

Click for combined categories: All Leveling Mounts

Click for combined categories: All Mounting Feet


Mounts - Leveling Carry - Castor Type

Mounts - Leveling Carry - Castor Type

Vibration Dampening with castor for movement.

Carry mount is a moveable mount in which the rubber mount is incorporated with a castor. Allows movement of machines and provides vibration dampening. Simply turn the adjusting hole with a screwdriver to lift or lower the castor.

Click for combined categories: All Leveling Mounts

Click for combined categories: All Mounting Feet


Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover

Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover

Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.

Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154795 products in 3682 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.