Quick Delivery Items: Square Bar - Small Parts And Bearings Categories


Bar

Hide Pictures

Go to Top  


Square Bar - 303 Stainless

Square Bar - 303 Stainless

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Brass

Square Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Carbon Steel

Square Bar - Carbon Steel

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Urethane

Square Bar - Urethane

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.

Click for combined categories: All Square Bar


Tool Steel - 496 Oil Hardening - Flat Stock

Tool Steel - 496 Oil Hardening - Flat Stock

General purpose tool steel with good wear resistance, durability and machinability

Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).

Square Shaft

Hide Pictures

Go to Top  


Shafting - Linear - Square

Shafting - Linear - Square


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square

Housings - Linear - Square

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Click for combined categories: All Linear Bearing Housings


Bar

Hide Pictures

Go to Top  


Bar - H Section - Brass

Bar - H Section - Brass


Bar - I Beam - Brass

Bar - I Beam - Brass


Fastening Bushings

Hide Pictures

Go to Top  


Bushings - Square Hole

Bushings - Square Hole

4140 Alloy Steel - Hardened (Rc 40-43).

Nuts

Hide Pictures

Go to Top  


Nuts - Square - Machine Screw

Nuts - Square - Machine Screw

For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards


Sleeves

Hide Pictures

Go to Top  


Sleeves - Square Hole - Plain - Carbon Steel

Sleeves - Square Hole - Plain - Carbon Steel

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Click for combined categories: All Square Hole Sleeves


Sleeves - Square Hole - Plain - Hardened

Sleeves - Square Hole - Plain - Hardened

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Click for combined categories: All Square Hole Sleeves


Sleeves - Square Hole - Threaded - Carbon Steel

Sleeves - Square Hole - Threaded - Carbon Steel

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


Click for combined categories: All Square Hole Sleeves


Spacers

Hide Pictures

Go to Top  


Spacers - Square - Threaded

Spacers - Square - Threaded

Threaded spacers.


Washers Square

Hide Pictures

Go to Top  


Washers - Square - Heavy Duty - 304 Stainless Steel

Washers - Square - Heavy Duty - 304 Stainless Steel


Click for combined categories: All Square Washers


Washers - Square - Heavy Duty - Steel

Washers - Square - Heavy Duty - Steel


Click for combined categories: All Square Washers


Bar

Hide Pictures

Go to Top  


Hexagonal Bar - 303 Stainless

Hexagonal Bar - 303 Stainless

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Hexagonal Bar - Brass

Hexagonal Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Hexagonal Bar - Carbon Steel

Hexagonal Bar - Carbon Steel

Saw Cut Ends. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Rectangular Bar - Aluminium

Rectangular Bar - Aluminium

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.

Click for combined categories: All Rectangular Bar


Rectangular Bar - Brass

Rectangular Bar - Brass

Thin and thick brass strip and rectangular profiles

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small sizes may not be perfectly straight.

Click for combined categories: All Rectangular Bar

Related Information:
See also Strip Brass for very thin strips


Bungs

Hide Pictures

Go to Top  


Bungs - Square

Bungs - Square

Plastic bungs fit inside square tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Click for combined categories: All Bungs

Related Information:
Square Bungs


Bungs - Square - Threaded

Bungs - Square - Threaded


Click for combined categories: All Bungs


Tube and Tubing

Hide Pictures

Go to Top  


Tube - Square - Aluminium

Tube - Square - Aluminium

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube


Tube - Square - Brass

Tube - Square - Brass

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube


Tube - Square - Carbon Fibre - Round Hole

Tube - Square - Carbon Fibre - Round Hole

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Non Metallic Tube


Tube - Square - Carbon Fibre - Square Hole

Tube - Square - Carbon Fibre - Square Hole

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Non Metallic Tube


Bumpers

Hide Pictures

Go to Top  


Bumpers - Square and Rectangle

Bumpers - Square and Rectangle

With drilled and counterbored holes for mounting. Neoprene only, no steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Bumpers - Square and Rectangle - Steel Plated - Neoprene

Bumpers - Square and Rectangle - Steel Plated - Neoprene

With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Bumpers - Square and Rectangle - Steel Plated - Urethane

Bumpers - Square and Rectangle - Steel Plated - Urethane

With drilled and counterbored holes for mounting. Urethane bonded to steel plate.


Click for combined categories: All Square Bumpers

Click for combined categories: All Bumpers


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Square - Miniature

Housings - Bearing - Square - Miniature

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square - Clamps

Housings - Linear - Square - Clamps


Click for combined categories: All Linear Bearing Housings


Magnets Alnico

Hide Pictures

Go to Top  


Magnets - Alnico - Bar

Magnets - Alnico - Bar

Cast Alnico 5 bar


Click for combined categories: All Magnets

Click for combined categories: All Alnico Magnets


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Square

Balsa Wood - Square

Square section in longer lengths 900mm plus. See block for short lengths.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Keys and Keysteel

Hide Pictures

Go to Top  


Keysteel Lengths - Square - Brass

Keysteel Lengths - Square - Brass

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Carbon Steel

Keysteel Lengths - Square - Carbon Steel

Plain carbon steel keysteel

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Stainless Steel

Keysteel Lengths - Square - Stainless Steel

303, 304 and 316 grade

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Keysteel Lengths - Square - Zinc Plated

Keysteel Lengths - Square - Zinc Plated

Zinc plated carbon steel keysteel

Manufactured slightly oversize to prevent machine backlash. Zinc plating may be silver or gold in colour.

Click for combined categories: All Keysteel Lengths


Mounts Cylindrical

Hide Pictures

Go to Top  


Mounts - Cylindrical - Square

Mounts - Cylindrical - Square

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.

Click for combined categories: All Cylindrical Mounts


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - Cast Iron

Housings - Bearing - Flanged - Square - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Square - Plastic

Housings - Bearing - Flanged - Square - Plastic

Use with steel, plastic or stainless steel bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Other Bearings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - W300

Housings - Bearing - Flanged - Square - W300

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.

Click for combined categories: All Housings with Integral Bearing


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Metric - Square - Metallic

Leadscrew Nuts - Metric - Square - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Magnets Alcomax

Hide Pictures

Go to Top  


Magnets - Alcomax - Cylindrical Bar

Magnets - Alcomax - Cylindrical Bar

No keepers


Click for combined categories: All Magnets

Click for combined categories: All Alcomax Magnets


Magnets - Alcomax - Rectangular Bar

Magnets - Alcomax - Rectangular Bar

No keepers


Click for combined categories: All Magnets

Click for combined categories: All Alcomax Magnets


Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Square - Insert Type

Suspension Units - Rubber - Square - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Screws Square Head

Hide Pictures

Go to Top  


Screws - Set - Cup Point - Square Head

Screws - Set - Cup Point - Square Head

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Screws - Set - Dog Point - Square Head

Screws - Set - Dog Point - Square Head

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Tools Threading

Hide Pictures

Go to Top  


Tools - Die Holders

Tools - Die Holders

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch).

Click for combined categories: All Tools


Pins - Wirelock

Hide Pictures

Go to Top  


Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Block

Balsa Wood - Block

Rectangular and square section short lengths.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Keyed

Shafting - Keyed

Keyways are cut full length of each bar.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting


Tools Threading

Hide Pictures

Go to Top  


Tools - Tap Wrenches

Tools - Tap Wrenches

Tee handle and bar types. Suit taps from 1mm to 12mm.

Click for combined categories: All Tools


Latches

Hide Pictures

Go to Top  


Handles - Tee

Handles - Tee

Zinc plated steel 7.94mm (5/16in.) square shank.


Latches - Toolbox

Latches - Toolbox

Zinc finished steel accepts 7.94mm (5/16in.) square shank.


Allthread

Hide Pictures

Go to Top  


Studs - Full Thread - Steel

Studs - Full Thread - Steel

Low Carbon Steel Allthread Threaded Bar

Lengths of Threaded Low Carbon Steel Bar.

Click for combined categories: All Studs


Latches

Hide Pictures

Go to Top  


Handles - Latching - Cab Locks

Handles - Latching - Cab Locks

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.


Handles - Latching - Padlocking

Handles - Latching - Padlocking

Zinc finished iron/steel construction. Has 5/16in. Square shank.


Latches - Snap Slide

Latches - Snap Slide

Used for attaching subplates and assemblies. The sliding bar is attached to the removable panel and the post is mounted to the stationary support.

In the closed position the spring action of the bar resists opening under vibration and shock load. The removable panel thickness must be between 1.2 and 4.0mm. Spacers may be needed and are included with each latch. The post can be attached with rivets, screw and nut or wood screw. Each comes with post and bar assembly. Made from zinc plated steel with chromate finish.

Allthread

Hide Pictures

Go to Top  


Studs - Full Thread - Stainless Steel

Studs - Full Thread - Stainless Steel

18-8 Stainless Steel Allthread Threaded Bar

Lengths of Threaded 18-8 Stainless Steel Bar.

Click for combined categories: All Studs


Linear Slides

Hide Pictures

Go to Top  


Linear Slide Assemblies - Plain - Low Profile - High Load

Linear Slide Assemblies - Plain - Low Profile - High Load

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.

Click for combined categories: All Linear Slide Assemblies


Latches

Hide Pictures

Go to Top  


Handles - Latching - 2-Point Locking Rod Kit

Handles - Latching - 2-Point Locking Rod Kit

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Handles - Latching - T-Handle - Folding

Handles - Latching - T-Handle - Folding

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.


Pulley Blocks

Hide Pictures

Go to Top  


Pulleys - Blocks - Eye - Swivel

Pulleys - Blocks - Eye - Swivel

Steel side plates. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.

Click for combined categories: All Pulley Blocks


Pulleys - Blocks - Flat

Pulleys - Blocks - Flat

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.

Click for combined categories: All Pulley Blocks


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty

Springs - Die - Imperial - Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty

Springs - Die - Imperial - Medium Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Pulley Blocks

Hide Pictures

Go to Top  


Pulleys - Blocks - Eye - Fixed

Pulleys - Blocks - Eye - Fixed

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.

Click for combined categories: All Pulley Blocks


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Extra Heavy Duty

Springs - Die - Imperial - Extra Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium-Heavy Duty

Springs - Die - Imperial - Medium-Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Latches

Hide Pictures

Go to Top  


Latches - Barrel Bolts - 304 Stainless

Latches - Barrel Bolts - 304 Stainless

Barrel bolt, body and plates are made from 304 stainless steel. Bolt and knob are nickel plated brass. Simply lift the knob, slide it over and drop it into notch for secure latching.

Saitn finish. Attractive and ideal for corrosive environments.

Cranks and Wheels

Hide Pictures

Go to Top  


Cranks - Handwheel - Spoked

Cranks - Handwheel - Spoked

Pressed steel with RAL 9005 black epoxy resin coating. Hub: Welded with H9 tolerance plain hole (Type B) or through square H11 tolerance hole (Type V). Axial and radial runout lower than IT 12.

Click for combined categories: All Cranks


Hoist Rings

Hide Pictures

Go to Top  


Rings - Hoist - Bar-Tite -tm-

Rings - Hoist - Bar-Tite -tm-

Range of movement 180o pivot, 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor minimum 5 to 1. Black oxide finish per Mil C-13924B. Certified heat treatment.

Click for combined categories: All Hoist Rings


Games General

Hide Pictures

Go to Top  


Games - Mind Challenge

Games - Mind Challenge

Strategy and skill games - great gift ideas

Great games of strategy and skill including KogWorkS. Mind Challenge Classic - Pyramid, Link, Ladies, Why, Sanity, Ei8ht, Tease, Square Off and Integr8. Challenging games to enhance memory, creativity and logical deductive reasoning. Simple rules. Easy to learn. Hours of fun.

Click for combined categories: All Games and Gadgets


Snap Buttons

Hide Pictures

Go to Top  


Snap Buttons - Double End

Snap Buttons - Double End

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Snap Buttons - Flat Type

Snap Buttons - Flat Type

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Handles

Hide Pictures

Go to Top  


Handles - Clean Line - Style 2

Handles - Clean Line - Style 2

High impact strength special technopolymer, in white similar to RAL 9002 with bright finish. Resistant to solvents, oils, greases and other chemical agents. Push fitting on plain shaft made from standard h9 tolerance bright drawn stock bars. Elastic coupling: the handle is not affected by vibrations and does not tend to loosen.

Click for combined categories: All Handles


Snap Buttons

Hide Pictures

Go to Top  


Snap Buttons - Single End - Dog Leg

Snap Buttons - Single End - Dog Leg

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Snap Buttons - Single End - Spring Leg

Snap Buttons - Single End - Spring Leg

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Springs Compression

Hide Pictures

Go to Top  


Springs - Drawbar - Stainless Steel

Springs - Drawbar - Stainless Steel

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Click for combined categories: All Drawbar Springs


Springs - Drawbar - Zinc Plated

Springs - Drawbar - Zinc Plated

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Click for combined categories: All Drawbar Springs


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Dowel

Balsa Wood - Dowel

Round section dowel.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Balsa Wood - Leading Edge

Balsa Wood - Leading Edge

Leading edge for aircraft use.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Balsa Wood - Trailing Edge

Balsa Wood - Trailing Edge

Trailing edge for aircraft use.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Balsa Wood - Sheet

Balsa Wood - Sheet

Thin sheet in lengths from 900mm plus

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Bearings for Wheelbarrows

Hide Pictures

Go to Top  


Bearings - Unground

Bearings - Unground

Unground bearings used in trolleys, prams and wheel barrow wheels


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Rectangle

Balsa Wood - Rectangle

Rectangular section in longer lengths 900mm plus. See block for short lengths.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Linear Slides

Hide Pictures

Go to Top  


Rail Systems - Type 1 - Linear - Precision - Rails

Rail Systems - Type 1 - Linear - Precision - Rails

Match with carriages by Size Column

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Click for combined categories: All Type 1 Carriages and Rails

Related Information:
Matching Narrow Carriages


Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Click for combined categories: All Type 1 Carriages and Rails


Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow

Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Click for combined categories: All Type 1 Carriages and Rails


Mounts Machinery

Hide Pictures

Go to Top  


Mounts - Neoprene Pads - Ribbed Pattern

Mounts - Neoprene Pads - Ribbed Pattern

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.

Click for combined categories: All Mounting Pads


Lifting Chain

Hide Pictures

Go to Top  


Chain - Straight Link - Coil

Chain - Straight Link - Coil

Welded chain esily identified by it's long narrow link design. Used for tailgates, trailer safety and barrier chain. Not for lifting.

Low carbon steel with zinc plated, hot dip galvanised finish.

Click for combined categories: All Link Chain


Latches

Hide Pictures

Go to Top  


Latches - Cabinet - Low Profile

Latches - Cabinet - Low Profile

Designed mainly for use on light cabinet doors and panels. A distinctive snap lets user know the latch is fully open or closed. Plug barrel and hex nuts are zinc diecast.

Cam, lock washer and screw are made from steel with a nickel plated finish. Hex type accepts 6.35mm (1/4 inch) hex tool. For use on panels up to 6.35mm (1/4 in.) thick. Straight cams.

Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Mild Steel

Shafting - Mild Steel

Great axles for low load and low precision applications like trolleys, carts and wheelbarrows.


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Metric - Heavy Duty

Springs - Die - Metric - Heavy Duty

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Click for combined categories: All Metric Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Metric - Light Duty

Springs - Die - Metric - Light Duty

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Click for combined categories: All Metric Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Metric - Medium Duty

Springs - Die - Metric - Medium Duty

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Click for combined categories: All Metric Die Springs

Click for combined categories: All All Die Springs


Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill Blanks

Rod - Drill Blanks

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.

Click for combined categories: All Drill Rod



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155121 products in 3615 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.