Quick Delivery Items: Splined Shafts And Bushes - Categories


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Shafts - Steel

Splined Shafts - Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Splined Shafts - Stainless Steel

Splined Shafts - Stainless Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Splined Bushes - Unflanged - Steel

Splined Bushes - Unflanged - Steel

Internally splined bushes. Match with same size splined shafts.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Splined Bushes - Unflanged - Stainless Steel

Splined Bushes - Unflanged - Stainless Steel

Internally splined bushes. 416 stainless steel. Match with same size splined shafts.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Splines - Ball - Telescoping

Splines - Ball - Telescoping


Knobs Pointer

Hide Pictures

Go to Top  


Knobs - Pointer - 18T Spline Type

Knobs - Pointer - 18T Spline Type

Push on suits 18 tooth splined 6.35mm (1/4 inch) shaft.


Click for combined categories: All Pointer Knobs


Ball Splines Linear

Hide Pictures

Go to Top  


Linear Ball Splines - Shaft

Linear Ball Splines - Shaft

Use with either flanged or unflanged Linear Ball Spline Bearings.


Click for combined categories: All Linear Ball Splines

Related Information:
Unflanged Bearings to Suit


Linear Ball Splines - Bearings - Unflanged

Linear Ball Splines - Bearings - Unflanged

Use with Linear Ball Spline Shaft.


Click for combined categories: All Linear Ball Splines


Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Reducers - Bore

Reducers - Bore

Inch to Metric / Inch to Inch / Metric to Metric.

S = Recommended set screw positions. C = Recommended position for single set screw fastening. T = Recommended position for tangential screw in clamp hub.

Shafting Precision Ground

Hide Pictures

Go to Top  


Shafts - Pinion

Shafts - Pinion


Click for combined categories: All Shafts


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafting General Purpose

Hide Pictures

Go to Top  


Shafts - Flexible - Panel Mount - Cased

Shafts - Flexible - Panel Mount - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Panel Mount - Open

Shafts - Flexible - Panel Mount - Open

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shaft Locks

Hide Pictures

Go to Top  


Shaft Locks - Potentiometer

Shaft Locks - Potentiometer


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Cased

Shafts - Flexible - Coupling Ends - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Clamp Type - One Piece - Aluminium

Collars - Shaft - Clamp Type - One Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Collars - Shaft - Clamp Type - One Piece - Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Steel

Collars - Shaft - Clamp Type - One Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Aluminium

Collars - Shaft - Clamp Type - Two Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Steel

Collars - Shaft - Clamp Type - Two Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Fairloc

Collars - Shaft - Fairloc


Click for combined categories: All Shaft Collars


Collars - Shaft - Fastlock

Collars - Shaft - Fastlock

No tools required.

Usable for Nonhardened Shafts. Inner body and Outer sleeve: 303 Stainless, Balls: 440C Stainless, Spring: 302 Stainless.

Click for combined categories: All Shaft Collars


Collars - Shaft - Gripfast - ABS Plastic

Collars - Shaft - Gripfast - ABS Plastic

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Click for combined categories: All Shaft Collars

Related Information:
Similar prodct Fastlock Collars

304 Stainless Gripfast Collars


Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hex Bore - Two Piece - Steel

Collars - Shaft - Hex Bore - Two Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hinged - Stainless Steel

Collars - Shaft - Hinged - Stainless Steel

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Hinged - Steel

Collars - Shaft - Hinged - Steel

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Standard - Stainless Steel

Collars - Shaft - Standard - Stainless Steel

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Collars - Shaft - Standard - Steel

Collars - Shaft - Standard - Steel

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Collars - Shaft - Stroke Adjustment - 303 Stainless

Collars - Shaft - Stroke Adjustment - 303 Stainless

Recommended tolerances for mating shaft diameter : h6. Use with rubber washers listed under WASHERS.

Click for combined categories: All Shaft Collars


Collars - Shaft - Stroke Adjustment - Steel

Collars - Shaft - Stroke Adjustment - Steel

Recommended tolerances for mating shaft diameter : h6. Use with rubber washers listed under WASHERS.

Click for combined categories: All Shaft Collars


Collars - Shaft - With Integral Shim

Collars - Shaft - With Integral Shim

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Click for combined categories: All Shaft Collars


Clutches

Hide Pictures

Go to Top  


Clutches - Shaft Mounted

Clutches - Shaft Mounted

24 V DC - Zero Backlash Armature - For parallel loads.

This basic information is designed to assist you to make a decision on which clutch to use. Full dimensions available on request.

Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Extenders - Shaft

Extenders - Shaft

Miniature and large shaft extenders and reducers


Couplings Other

Hide Pictures

Go to Top  


Couplings - Clutch - Shaft Mounted

Couplings - Clutch - Shaft Mounted

0.565 to 14 N.m. For in-line loads.

24 Volt DC. Zero Backlash Armature. For in-line loads. Dynamic torque is 80% of static torque. 0.565 N.m Models have no keyway in rotor.

Related Information:
Shafting


Clutches

Hide Pictures

Go to Top  


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Click for combined categories: All Slip Clutches


Spacers

Hide Pictures

Go to Top  


Spacers - Round - Through Bore - Aluminium

Spacers - Round - Through Bore - Aluminium

Shaft spacers - Aluminium


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Spacers - Round - Through Bore - Brass

Spacers - Round - Through Bore - Brass

Shaft spacers - Brass


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Spacers - Round - Through Bore - Nylon

Spacers - Round - Through Bore - Nylon

Shaft spacers - Nylon


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Spacers - Round - Through Bore - Steel

Spacers - Round - Through Bore - Steel

Shaft spacers - Steel


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Open

Bearings - Linear - Ball - Open

For running on shafts supported by a rail along their length.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Locking Bushings

Hide Pictures

Go to Top  


Bushings - Integral Taper

Bushings - Integral Taper

Stainless Steel Taper Bushings.

Will not mar shafts.

Click for combined categories: All Locking Bushings


Bushings - Locking Hub

Bushings - Locking Hub

Friction grip construction.

Connects rotating components to shafts. Transmits high torque without keyways. Two styles - see diagrams.

Click for combined categories: All Locking Bushings


Spacers

Hide Pictures

Go to Top  


Spacers - Round - Through Bore - Stainless Steel

Spacers - Round - Through Bore - Stainless Steel

Shaft spacers - Stainless Steel


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Clutches

Hide Pictures

Go to Top  


Clutches - Magnetic Particle 24VDC

Clutches - Magnetic Particle 24VDC

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Click for combined categories: All Magnetic Clutches


Bearings Press In

Hide Pictures

Go to Top  


Bearings - Press-Fit - Acetal - SDP

Bearings - Press-Fit - Acetal - SDP

Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.

Click for combined categories: All Press In Bearings


Locking Assemblies

Hide Pictures

Go to Top  


Assemblies - Locking - Flanged

Assemblies - Locking - Flanged

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

Click for combined categories: All Locking Assemblies


Gears Metric Stem

Hide Pictures

Go to Top  


Gears - Spur - Module 0.5 - Stem

Gears - Spur - Module 0.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.75 - Stem

Gears - Spur - Module 0.75 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 0.8 - Stem

Gears - Spur - Module 0.8 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 1.5 - Stem

Gears - Spur - Module 1.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2.5 - Stem

Gears - Spur - Module 2.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2 - Stem

Gears - Spur - Module 2 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Thomson Super - Closed

Bearings - Linear - Ball - Thomson Super - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super - Open

Bearings - Linear - Ball - Thomson Super - Open

For running on shafts supported by a rail along their length.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Closed

Bearings - Linear - Ball - Closed

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Precision Steel - Closed

Bearings - Linear - Ball - Thomson Precision Steel - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Precision Steel - Open

Bearings - Linear - Ball - Thomson Precision Steel - Open

For running on shafts supported by a rail along their length.


Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Super Smart - Closed

Bearings - Linear - Ball - Thomson Super Smart - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super Smart - Open

Bearings - Linear - Ball - Thomson Super Smart - Open

For running on shafts supported by a rail along their length.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Hubs

Hide Pictures

Go to Top  


Hubs - Gear and Dial - Single

Hubs - Gear and Dial - Single

Fairloctm Hubs require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance.

Click for combined categories: All Hubs


Shaftloc

Hide Pictures

Go to Top  


Shaftloc-tm Sleeves - Single Ended

Shaftloc-tm Sleeves - Single Ended

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Click for combined categories: All Shaftloc


Knobs Pointer

Hide Pictures

Go to Top  


Knobs - Pointer - Arrow Top

Knobs - Pointer - Arrow Top

Push on. Suits 6.35mm (1/4 inch) shaft.


Click for combined categories: All Pointer Knobs


Knobs - Pointer - Skirted

Knobs - Pointer - Skirted

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass insert.


Click for combined categories: All Pointer Knobs


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Frelon J Lined - Closed - Precision

Bearings - Linear - Frelon J Lined - Closed - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon J Lined Linear Bearings


Bearings - Linear - Frelon J Lined - Closed - Standard

Bearings - Linear - Frelon J Lined - Closed - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon J Lined Linear Bearings


Bearings - Linear - Frelon J Lined - Open - Precision

Bearings - Linear - Frelon J Lined - Open - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon J Lined Linear Bearings


Bearings - Linear - Frelon J Lined - Open - Standard

Bearings - Linear - Frelon J Lined - Open - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon J Lined Linear Bearings


Brakes

Hide Pictures

Go to Top  


Brakes - Magnetic - Particle

Brakes - Magnetic - Particle

Zero Backlash - Low Inertia - No Friction Surface.

24 V DC. Shaft becomes coupled to housing with electrical excitation. Torque is proportional to the DC input current.

Collars

Hide Pictures

Go to Top  


Collars - Threaded - Clamp Type - Steel

Collars - Threaded - Clamp Type - Steel

Offer full radial holding power without marring the shaft.


Click for combined categories: All Threaded Shaft Collars


Knobs Pointer

Hide Pictures

Go to Top  


Knobs - Pointer - Black Aluminium

Knobs - Pointer - Black Aluminium

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft.


Click for combined categories: All Pointer Knobs


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Frelon J Lined - Closed - Self Aligning

Bearings - Linear - Frelon J Lined - Closed - Self Aligning

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon J Lined Linear Bearings


Hobby Shafting

Hide Pictures

Go to Top  


Shafting - Ground - Hobby - Steel

Shafting - Ground - Hobby - Steel

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Shaft Assortments


Collars

Hide Pictures

Go to Top  


Collars - Threaded - Clamp Type - Stainless Steel

Collars - Threaded - Clamp Type - Stainless Steel

Offer full radial holding power without marring the shaft.


Click for combined categories: All Threaded Shaft Collars


Locking Assemblies

Hide Pictures

Go to Top  


Connectors - Hub - Locking

Connectors - Hub - Locking

For fast and accurate positioning and locking of components on shafts.

Fast and frequent mounting and dismounting with only one screw. No axial movement when mounted. Uniform surface pressure against shaft component prevents damage to these parts. Temperature range Minus 30 oC to Plus 82 Deg C. Double walled sleeve expands when the pressure screw is tightened to the specified torque. Dismantled easily by releasing pressure on the screw.

Knobs Pointer

Hide Pictures

Go to Top  


Knobs - Pointer - Aluminium and Plastic

Knobs - Pointer - Aluminium and Plastic

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass Insert. White Pointer.


Click for combined categories: All Pointer Knobs


Pulleys Idler

Hide Pictures

Go to Top  


Pulleys - Timing - Idler

Pulleys - Timing - Idler

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Click for combined categories: All Idler Pulleys

Related Information:
Timing Belts (See types under T)

Idler Shafts


Pulleys Vee

Hide Pictures

Go to Top  


Pulleys - Vee - Idler

Pulleys - Vee - Idler

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Click for combined categories: All Vee Pulleys

Click for combined categories: All Idler Pulleys

Related Information:
Idler Shafts


Latches

Hide Pictures

Go to Top  


Latching Handles - Outside Door - Heavy Duty

Latching Handles - Outside Door - Heavy Duty

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.

Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Miniature - Super High Precision

Bearings - Linear - Ball - Miniature - Super High Precision

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Click for combined categories: All Linear Ball Bearings


Bearings One Way Clutch

Hide Pictures

Go to Top  


Bearings - One Way - Roller

Bearings - One Way - Roller

Roller Clutch Bearings rotate in one direction only.

Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.

Click for combined categories: All One Way Clutch Bearings


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium

Shafting - Aluminium

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting - Pipe - Aluminium

Shafting - Pipe - Aluminium

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Shafting - Supported - Pre-Drilled - Aluminium

Shafting - Supported - Pre-Drilled - Aluminium

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Ground - Silver Steel

Shafting - Ground - Silver Steel

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Keyed

Shafting - Keyed

Keyways are cut full length of each bar.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting


Shafting - Mild Steel

Shafting - Mild Steel

Great axles for low load and low precision applications like trolleys, carts and wheelbarrows.


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Cold Rolled Steel

Shafting - Ground - Cold Rolled Steel

Cold rolled steel with saw cut ends and smooth finish


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Chrome Plated

Shafting - Ground - Precision - Chrome Plated

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Hardened and recommended for use with precision bearings. Ends are not plated.


Shafting - Ground - Precision - High Carbon Steel

Shafting - Ground - Precision - High Carbon Steel

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 303 Grade

Shafting - Ground - Precision - Stainless 303 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 316 Grade

Shafting - Ground - Precision - Stainless 316 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 416 Grade Hardened

Shafting - Ground - Precision - Stainless 416 Grade Hardened

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 420 Grade Hardened

Shafting - Ground - Precision - Stainless 420 Grade Hardened

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Pre Drilled and Tapped - High Carbon Steel

Shafting - Pre Drilled and Tapped - High Carbon Steel

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting


Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Shafting - Pre Drilled and Tapped - Stainless Steel Steel

For use with rail supports and open linear bearings


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting


Screws Socket Set (Grub Screws)

Hide Pictures

Go to Top  


Socket Set Screws - Diamond Knurled Tip - Carbon Steel

Socket Set Screws - Diamond Knurled Tip - Carbon Steel

Grub screws that grip rough shafts.


Click for combined categories: All Diamond Knurled Tip Grub Screws



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155123 products in 3615 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.