Categories for: shock absorbers
Screws - Machine - PEEK - Pan Head
PEEK is a super-engineering thermoplastic used for its special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of Vitre™.
Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance. Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180 Degrees Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0. Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm. For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.
Absorbs shock and reduces noise
Low resonance magnification. Ozone, UV and Chemical resistant.
Needle Files, Pin Vises, Gear Gauge, Wire and Tube Benders, Tube Cutters, Miniature tap, Turnbuckle Wrench, Shock Matching Tool and die set
X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.
These bumpers are designed for applications involving shock and collision protection along a straight line.
Made from TecsPaks patented elastomer. Less than 40D hardness. Mounting bolt not included.
Protects fragile subjects from micro-vibrations and light shocks. Vibration dampening
Bolt not supplied. Collar : Brass. Bushing : Silicone Gel.
Ball Transfer Units - Spring Loaded - Flanged
For conveying materials. From miniature to large.
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
Ball Transfer Units - Spring Loaded - Unflanged
For conveying materials. From miniature to large.
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
Taper Screw Hex Socket Head
Peek is a thermoplastic excellent for its special physical and chemical characteristics. Impenetrable by most chemicals except concentrated sulphuric acid. Excellent thermal, water, abrasion, shock, radiation and fatigue resistance. Excellent electrical properties. Heat resistant to 80 Deg C. Flame resistant by UL standard 94V-0. Suitable for hot water pumps and chemical pumps. Useful in electric field applications, transformer and computer machinery.
Screws - Machine - PEEK - Countersunk Head
Material: Polyetheretherketone - Super-engineering thermoplastic, excellent for its special physical and chemical characteristics.
Excellent chemical reistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent radiation resistance and electrical properties. Excellent thermal and water resistance; maintains high heat-resistnace strength. Excellent abrasion, shock and fatigue resistance. Excellent flame-resistance. Heat resistant temp 180 Deg C. Useful in hot-water pumps, chemical pumps, electronic field applications: transformers and computer machinery. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads to be shorter then 20mm.
304 stainless steel
Any deviations such as angular lifts, shock loads, modifications will result in drastically reduced maximum loads.
Low carbon cold drawn steel with zinc plated finish
Any deviations such as angular lifts, shock loads, modifications will result in drastically reduced maximum loads.
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.
Bearings - Linear - Ball - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling.
Couplings - Spline Type - Complete
0.5 to 4.5 Nm. 12000 to 24000 rpm.
Angular Misalignment: 2 Deg. Parallel Offset: 0.2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 deg C.
Couplings - Spline Type - Hubs
0.5 to 4.5 Nm. 12000 to 24000 rpm.
Angular Misalignment: 2 Deg. Parallel Offset: 0.2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 deg C.
Couplings - Spline Type - Splines
0.5 to 4.5 Nm. 12000 to 24000 rpm.
Angular Misalignment: 2 Deg. Parallel Offset: 0.2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 deg C.
Couplings - Three Jaw Type - Inserts
Match with Three Jaw Type hubs by OD
Use Bost-Bronz inserts for high torque loads at slower speeds. Use rubber for quiter operation. Use polyurethane for moderate to heavy shock loads.
Couplings - Geargrip - Standard - Complete
0.67 to 6.78 Nm. Max speed 3000 rpm.
Sleeve - Neoprene with Ground OD; Hub - Zinc Alloy Die Casting. Suitable operating temperature is -28 to 70 Deg. Celsius. Features: no lubrication, electrically isolated, dampens shock and vibration.Rod - Drill - S-7 Air Hardening
For punches dies and high strength machine parts. Unhardened - requires heat treatment.
Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.
Damps low frequency vibrations.
Studs: Steel / Body : Silicone Gel / Spring : Piano Wire Type B Nickel Plated. Vertical vibrations damped without horizontal deflection. Compression only. Outstanding shock absorbing ability.
Adjustable Height.
Screw and base sold separately. Order both parts for a complete unit. Designed for efficient and economic installation of a wide range of machinery. Machines can be installed rapidly and economically without bolting down. Absorb both shock and vibration within the machine and protect machines from external disturbances. Height of adjustment is through a levelling screw passing through machine foot into tapped bush in steel cover.
Mounts - Spring - Eliptical Leaf - Light Duty
Lightweight NATO approved X Mounts
The 6kg mount is designed to isolate lightweight equipment like computers, printers, electronics panels etc from shock and vibration. All vibration modes and stiffness indicated are for mounting on a flat horizontal surface where vertical indicates the downwards stiffness and horizontal indicates stiffness alonf the horizontal plane. Horizontal 2 figures are for inverted mounting. 304 Stainless leaves, nylon and stainless washers and polymer damping compound. Temperature range +10 Deg C to + 30 Deg C.Too many choices?
You have selected to see ALL categories including any of the following words: shock absorbers
|
| |||||||||||||||||||||||||
| Select all items starting with... | |||||||||||||||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Or use the category search | ||||||||||||||||
|
| |||||||||||||||||||||||||
