Categories for: shaftloc
Simple effective way to lock components onto shafts.
Passivated 416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. Precision, dynamically balanced and suitable for high speed applications. Diameters A and B concentric within 0.013 T.I.R. Tightening the nut causes slotted sleeve to contract, gripping the shaft and clamping the component to the sleeve.
Shaftloc-tm Sleeves - Double Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.
Shaftloc-tm Sleeves - Single Ended
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.
Simple effective component clamping
Passivated 416 Stainless Steel. Simple two part screw together system clamps parts securely together. Vibration resistant. Employing a special asymetric thread to self-lock when the nut encounters resistance. The nut turns freely until it contacts the parts being clamped together. Additional turns wedge the parts into a locked and vibration resistant condition.
For mounting of shafting.
Shafting sold separately.
Includes shaft.
Includes shaft to h6 tolerances.
Match with same size internal splined bushes.
Match bushes and shafts by Major Diameter.
For use in Cross Axis gearboxes with bores. P and PF Series.
Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).
Shafts - Flexible - Coupling Ends - Open (Ondrives)
Bi-directional flexible shaft couplings.
Hubs: 220 MO7 / Shaft: Steel. Standard bored ends. Keyways can be included in the bores for additional cost.
Shafts - Flexible - Coupling Ends - Open (SDP)
Flexible shafting with coupling ends ready to attach to a fixed shaft.
See PDF file at bottom of internet page for Performance Data.
Shafts - Flexible - Masterflex - Size 13 - High Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 13 - Standard Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 16 - High Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 16mm encased in 32mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 16mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 16 - Standard Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 16mm encased in 32mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 16mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 4 - High Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 4 - Standard Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 5 - High Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 5 - Standard Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 6 - High Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 6 - Standard Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 8 - High Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 8 - Standard Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 9 - High Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.
Shafts - Flexible - Masterflex - Size 9 - Standard Duty
Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.
Torsional deflection in degrees is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.
No tools required.
Usable for Nonhardened Shafts. Inner body and Outer sleeve: 303 Stainless, Balls: 440C Stainless, Spring: 302 Stainless.
Match with same size External splined shafts.
Match bushes and shafts by Major Diameter.
Couplings - Flexible-Shaft Type
Nonmagnetic flexible shaft couplings. Max torque 0.39 Nm.
Maximum Torque 0.39 N.m (3.5 lb.in). Minium operating radius 89 mm (3.5 in.). Torsional deflection 1.8 Deg per lb.in per inch (25mm) of shaft in Winding Direction. Torsional deflection 2.6 Deg per lb.in per inch (25mm) of shaft in Unwinding Direction. Cadmium Plated Brass Ends - Phosphor Bronze Cable - 300 Series Stainless Screws.
Assemblies - Locking - Flanged
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
Assemblies - Locking - Unflanged
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
For fast and accurate positioning and locking of components on shafts.
Fast and frequent mounting and dismounting with only one screw. No axial movement when mounted. Uniform surface pressure against shaft component prevents damage to these parts. Temperature range Minus 30 Deg C to Plus 82 Deg C. Double walled sleeve expands when the pressure screw is tightened to the specified torque. Dismantled easily by releasing pressure on the screw.
By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.
Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.
Washers - Lock - Internal Tooth - Spring Steel
These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.
Dimensions are nominal and may vary between batches.
Washers - Lock - Internal Tooth - Stainless Steel
These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.
Dimensions are nominal and may vary between batches.
Collars - Shaft - Gripfast - 304 Stainless Steel
Self Locking - Quick Release.
304 Stainless Body, Retention Ring, Balls and Springs.
Collars - Shaft - Hinged Type - Round - Stainless Steel
Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel
Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.
Collars - Shaft - Hinged Type - Round - Steel
Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)
Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.
Mild Steel. Chemically black (RoHS Compliant)
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft. It is recommended that you conduct your own testing for your application.
Collars - Shaft - Standard - Stainless Steel
Includes miniature precision types. 303 and 316 Types.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.
Collars - Shaft - Standard - Steel
Includes miniature precision types. Carbon steel.
Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.
Use with either flanged or unflanged Linear Ball Spline Bearings.
24 V DC - Zero Backlash Armature - For parallel loads.
This basic information is designed to assist you to make a decision on which clutch to use. Full dimensions available on request.
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Requires no power.
Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.
Couplings - Clutch - Shaft Mounted
0.565 to 14 N.m. For in-line loads.
24 Volt DC. Zero Backlash Armature. For in-line loads. Dynamic torque is 80% of static torque. 0.565 N.m Models have no keyway in rotor.
Universal Joints - Quick Release Needle Roller - Integral Shaft
DIN808-W Low Backlash with Sealed Bearings
Forged centre cross with hard ground ends for sealed needle bearings. 4000 RPM Max. Round bore both sides.
Universal Joints - Quick Release Needle Roller - Integral Shaft - Hex Bore
DIN808-W Low Backlash with Sealed Bearings
Forged centre cross with hard ground ends for sealed needle bearings. 4000 RPM Max. Integral shaft one side. Hex bore on the quick release.
For linear shafting.
Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.
For linear shafting.
Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.
For linear shafting.
Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.
Housings - Bearing - Pillow Block - Bronze Bearing
Aluminium with 5 percent self aligning sintered bronze bearing.
Bearing: Bronze SAE 840 (oil impregnated). / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. The performance of a plain bearing is stated as a PV value, which is the product of a pressure and velocity.
Housings - Bearing - Pillow Block - Needle Roller Bearing
Aluminium with 5 percent self aligning drawn cup needle roller bearing.
Bearing: Drawn cup needle roller. / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 58 HRC (Rockwell C). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance.
Housings - Bearing - Pillow Block - PTFE Bronze Bearing
Aluminium with 5 percent self aligning sintered bronze bearing and PTFE solid lubricant.
Bearing: Bronze PTFE impregnated. / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. Operating temperature minus 201 to plus 282 Degrees Celsius (minus 330 to plus 540 Degrees Farenheit).
Friction grip construction.
Connects rotating components to shafts. Transmits high torque without keyways. Two styles - see diagrams.
Devices - Locking - Small Series
10 - 25mm Bores
15 to 390 Nm. ETG 100 High Strength Steel. Recommended machining tolerances Shaft h8, Hub H8.
25 - 280mm Bores
840 to 360000 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.
18 - 180mm Bores
310 to 46980 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.
18 - 180mm Bores
260 to 36100 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.
19 - 220mm Bores
255 to 68000 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.
19 - 180mm Bores
350 to 41300 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.
19 - 180mm Bores
300 to 34250 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.
6 - 120mm Bores
12 to 17500 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.
2.4 to 2200 Nm, 6-80mm Bores
ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.
Housings - Linear - Pillow Block
Includes Bearings.
Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball Bushing™ Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).Too many choices?
You have selected to see ALL categories including any of the following words: shaftloc
Click here to see ONLY THE MOST POPULAR categories including any of the following words: shaftloc
|
| |||||||||||||||||||||||||
| Select all items starting with... | |||||||||||||||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Or use the category search | ||||||||||||||||
|
| |||||||||||||||||||||||||
