Categories for: rounthane belts
Joinable belting.
Join with Rounthane Connectors. Material : Non Slip Polyurethane. Use with grooved idler pulleys or 6.35mm Top Width V Pulleys. Purchased per 305mm (1 foot). Orders for more than 1 foot will be supplied as a continuous length.
Self Guided Belts - 10mm Pitch.
-30 to +80 Degree Celsius. Low noise and vibration. No flanges needed on pulleys for guidance. Polyurethane Reinforced with Steel Tensile Cords. Very precise alternative to timing belts. No need for pulley flanges.
Belts - Conidrive N10 - Lengths
Self Guided Belts - 10mm Pitch - Sold by the metre.
-30 to +80 Degree Celsius. Self guiding system - no pulley flanges required. For metering, positioning and oscillating systems. Polyurethane Reinforced with Steel Tensile Cords. Orders for more than one metre will be supplied as a continuous length up to the max length shown.
Belts - Posi-Drive - 2.50 mm Circular Pitch - Single Core
Same as US 32 Pitch - Use with Posi-Drive Pulleys.
Use Single Core with Posi-Drive Pulleys. 2.494mm Circular Pitch. Same as US 32 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.
Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core
Same as US 0.1475 Pitch - Use with Posi-Drive Sprockets.
Use Double Core with Posi-Drive Sprockets. 3.746mm Circular Pitch. Same as US 0.1475 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.
Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core
Same as US 20 Pitch - Use with Posi-Drive Sprockets.
Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.
Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core
Same as US 20 Pitch - Use with Posi-Drive Pulleys.
Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.
Belts - Vee - 10.0 x 5.5mm - M/3L
Miniature and small belts. 10.0mm Top Width x 5.5mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 10.0 x 6.0mm - Z
Miniature and small belts. 10.0mm Top Width x 6.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 12.5 x 9.0mm - A/4L
12.5mm Top Width x 9.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 12.7 x 10.0mm - SPA
12.7mm Top Width x 10.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 16.3 x 13.0mm - SPB
16.3mm Top Width x 13.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 16.5 x 11.0mm - B/5L
16.5mm Top Width x 11.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 22.0 x 14.0mm - C
22.0mm Top Width x 14.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 22.0 x 18.0mm - SPC
22.0mm Top Width x 18.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 25.4 x 22.2mm - SPP-8V
25.4mm Top Width x 22.2mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 31.5 x 19.0mm - D
31.5mm Top Width x 19.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 38.0 x 25.5mm - E
38.0mm Top Width x 25.5mm Height.
Sizes are nominal and may vary slightly.
Miniature and small belts. 5.0mm Top Width x 3.0mm Height.
Sizes are nominal and may vary slightly.
Miniature and small belts. 6.0mm Top Width x 4.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 6.4 x 4.1mm - 2L
Miniature and small belts. 6.4mm Top Width x 4.1mm Height.
Sizes are nominal and may vary slightly.
Miniature and small belts. 8.0mm Top Width x 4.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Vee - 9.7 x 8.0mm - SPZ
Miniature and small belts. 9.7mm Top Width x 8.0mm Height.
Sizes are nominal and may vary slightly.
Belts - Timing - 1.000mm Pitch - 3mm Wide
Miniature 1mm series timing belts. 3mm Wide +/- 0.2mm
Pitch (P) - 1.000mm. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Breaking strength is not indicative of working strength.
Belts - Timing - 1.000mm Pitch - 6mm Wide
Miniature 1mm series timing belts. 6mm Wide +/- 0.2mm
Pitch (P) - 1.000mm. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Breaking strength is not indicative of working strength.
Pulleys - Timing - 1.000mm Pitch - To Suit 3mm Wide Belts
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy.
Pulleys - Timing - 1.000mm Pitch - To Suit 6mm Wide Belts
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy.
Belts - Timing - 1.500mm Pitch - GT - 3mm Wide
GT Series Metric Timing Belts.
Pitch (P) - 1.500mm. Tooth Height (H) - 0.56mm. Belt Height (W) - 1.00mm.
Belts - Timing - 1.500mm Pitch - TN150 Bando - 15mm Wide
TN150 Series Bando Timing Belts - Limited Range. Enquire for sizes not listed.
Pitch (P) - 1.500mm.
Pulleys - Timing - 1.500mm Pitch - GT - To Suit 3mm Wide Belts
Timing Pulleys to suit 1.5mm Pitch GT Timing Belts.
Aluminium Alloy.
Belts - Timing - 10.000mm Pitch - AT10 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.
Belts - Timing - 10.000mm Pitch - AT10 - 50mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.
Belts - Timing - 10.000mm Pitch - T10 -16mm Wide
T Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.
Belts - Timing - 10.000mm Pitch - T10 -25mm Wide
T Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm. Breaking strength is not indicative of working strength.
Belts - Timing - 10.000mm Pitch - T10 Double Sided
T Series Metric Timing Belts.
Pitch (P) - 10.000mm. Tooth Length (T) - 3.25mm. Tooth Height (H) - 2.50mm. Belt Height (W) - 7.00mm - Corner Radii ( r ) - 0.60mm. Breaking strength is not indicative of working strength.
Pulleys - Timing - 10.000mm Pitch - AT10 - To Suit 16.0mm Wide Belts
Timing pulleys to suit AT10 Series belts
Pulleys - Timing - 10.000mm Pitch - AT10 - To Suit 26.0mm Wide Belts
Timing pulleys to suit AT10 Series belts
Pulleys - Timing - 10.000mm Pitch - AT10 - To Suit 32.0mm Wide Belts
Timing pulleys to suit AT10 Series belts
Pulleys - Timing - 10.000mm Pitch - AT10 - To Suit 50.0mm Wide Belts
Timing pulleys to suit AT10 Series belts
Belts - Timing - 2.032mm Pitch - MXL - 3mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 4.76mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 4.5mm to 4.76mm (3/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 6mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 6.0mm to 6.35mm (1/4 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 8mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 8.0mm and 7.93mm (5/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 9.5mm and 9.53mm (3/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL Double Sided - 3mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch - Double Sided. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL Double Sided - 4.76mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 4.5mm to 4.76mm (3/16 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL Double Sided - 6mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 6.0mm to 6.35mm (1/4 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL Double Sided - 9.5mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 9.5mm and 9.53mm (3/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL TruMotion - 3mm Wide
PowerGrip® TruMotion® Timing Belts in 2.032mm or 0.080 inch pitch.
The TruMotion® belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40°F to +220°F, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion® belts have a durable wear surface for longer life and are RoHS compliant. RoHs Compliant. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL TruMotion - 4.5mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL TruMotion - 6.0mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL TruMotion - 8.0mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.032mm Pitch - MXL TruMotion - 9.5mm Wide
Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm
Pitch (P) - 2.032mm (0.08 inch). Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.
Pulleys - Timing - 2.032mm Pitch - MXL - To Suit 3.0 to 3.2mm Wide Belts
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts.
Various materials as shown.
Pulleys - Timing - 2.032mm Pitch - MXL - To Suit 6.0 to 6.4mm Wide Belts
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts.
Various materials as shown.
Pulleys - Timing - 2.032mm Pitch - MXL - To Suit 9.5 to 9.6mm Wide Belts
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts.
Various materials as shown.
Belts - Timing - 2.073mm Pitch - 40DP - 3mm Wide
Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.
Pitch (P) - 2.073mm (0.0816 inch). Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 4.5mm Wide
Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.
Pitch (P) - 2.073mm (0.0816 inch). Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 6.0mm Wide
Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.
Pitch (P) - 2.073mm (0.0816 inch). Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.073mm Pitch - 40DP - 8.0mm Wide
Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.
Pitch (P) - 2.073mm (0.0816 inch). Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Pulleys - Timing - 2.073mm Pitch - 40DP - To Suit 4.7 to 4.8mm Belts
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts.
Various materials as shown.
Pulleys - Timing - 2.073mm Pitch - 40DP - To Suit 6.0 to 6.4mm Belts
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts.
Various materials as shown.
Pulleys - Timing - 2.073mm Pitch - 40DP - To Suit 7.9 to 8.0mm Belts
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts.
Various materials as shown.
Belts - Timing - 2.000mm Pitch - GT - 3mm Wide
GT Series Metric Timing Belts.
Pitch (P) - 2.000mm. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.45mm. TRUE METRIC is a trademark of Designatronics. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT - 4mm Wide
GT Series Metric Timing Belts.
Pitch (P) - 2.000mm. Tooth Height (H) - 0.75mm. Belt Height (W) - 1.45mm.
Belts - Timing - 2.000mm Pitch - GT - 6mm Wide
GT Series Metric Timing Belts.
Pitch (P) - 2.000mm. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.45mm. TRUE METRIC is a trademark of Designatronics. Breaking strength is not indicative of working strength.
Belts - Timing - 2.000mm Pitch - GT - 9mm Wide
GT Series Metric Timing Belts.
Pitch (P) - 2.000mm. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.45mm. TRUE METRIC is a trademark of Designatronics. Breaking strength is not indicative of working strength.
Pulleys - Timing - 2.000mm Pitch - GT - To Suit 3mm Wide Belts
Timing Pulleys to suit GT 2mm Pitch Timing Belts.
Various materials as shown.
Pulleys - Timing - 2.000mm Pitch - GT - To Suit 4mm Wide Belts
Timing Pulleys to suit 2mm Pitch GT Timing Belts 4mm Wide.
Aluminium Alloy.
Pulleys - Timing - 2.000mm Pitch - GT - To Suit 6mm Wide Belts
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.
Various materials as shown.
Pulleys - Timing - 2.000mm Pitch - GT - To Suit 9mm Wide Belts
Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.
Aluminium Alloy.
Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.Too many choices?
You have selected to see ALL categories including any of the following words: rounthane belts
|
| |||||||||||||||||||||||||
| Select all items starting with... | |||||||||||||||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Or use the category search | ||||||||||||||||
|
| |||||||||||||||||||||||||
