About Us Brands Contact FAQ Freight Payments Products Technical More Links...

Small Parts and Bearings
Round Knobs (Full Range)


Knobs Round

TopHide Pictures

Knobs - Round - Female - Soft
Knobs - Round - Female - Soft

Match Strength: 100%

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Brass tapped insert.


Knobs - Round - Male - Soft
Knobs - Round - Male - Soft

Match Strength: 100%

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud.


Knobs Mushroom

TopHide Pictures

Knobs - Mushroom Round - Threaded - Phenolic
Knobs - Mushroom Round - Threaded - Phenolic

Match Strength: 100%

Also see combined categories:
All Mushroom Knobs
All Knobs


Knobs Lock

TopHide Pictures

Handles - Lock - Round
Handles - Lock - Round

Match Strength: 99%

Also see combined categories:
All Lock Handles
All Handles

Satin Chrome with black plastic grip. Supplied with 2 keys.


Cross Blocks

TopHide Pictures

Cross Blocks - Heavy Duty - Two Knobs
Cross Blocks - Heavy Duty - Two Knobs

Match Strength: 94%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Match Strength: 93%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Cross Blocks - Heavy Duty - Two Nuts
Cross Blocks - Heavy Duty - Two Nuts

Match Strength: 87%

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Latches

TopHide Pictures

Latches - Push to Close
Latches - Push to Close

Match Strength: 78%

Knob stores flush and pops out at a touch. Turn the knob to open and push to close. Latches securely with knob in or out.

Accomodates misalignment. Use on flush, surface mount or perpendicular doors. Quick 31.8mm Diameter round hole installation. Polycarbonate / ABS blended material with glass filled black nylon keepers, nut and pawl. Corrosion and UV resistant. Chrome plated with 304 stainless steel internal springs. Max working load 22kg. Available with serrated pawl for self adjusting grip or regular pawl for fixed grip. Keepers included. Keeper for fixed grip is stainless steel.


Clips

TopHide Pictures

Rings - Round - Nickel Plated
Rings - Round - Nickel Plated

Match Strength: 55%

Nickel plated round rings


Screws Round Head

TopHide Pictures

Screws - Round Head - 304 Stainless - Slotted
Screws - Round Head - 304 Stainless - Slotted

Match Strength: 55%

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.


Screws - Round Head - Brass - Slotted
Screws - Round Head - Brass - Slotted

Match Strength: 55%

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BSW - UNF - UNC

Nuts sold seperately - See Nuts.


Screws - Round Head - Nylon - Slotted
Screws - Round Head - Nylon - Slotted

Match Strength: 55%

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.


Screws - Round Head - Steel - Slotted
Screws - Round Head - Steel - Slotted

Match Strength: 55%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.


Spacers

TopHide Pictures

Spacers - Round - Hobby
Spacers - Round - Hobby

Match Strength: 55%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Inexpensive nylon spacers for hobby applications


Spacers - Round - Threaded
Spacers - Round - Threaded

Match Strength: 55%

Brass or 303 Stainless Steel


Spacers - Round - Through Bore - Aluminium
Spacers - Round - Through Bore - Aluminium

Match Strength: 55%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Aluminium


Spacers - Round - Through Bore - Brass
Spacers - Round - Through Bore - Brass

Match Strength: 55%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Brass


Spacers - Round - Through Bore - Nylon
Spacers - Round - Through Bore - Nylon

Match Strength: 55%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Shaft spacers - Nylon


Spacers - Round - Through Bore - Stainless Steel
Spacers - Round - Through Bore - Stainless Steel

Match Strength: 55%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Stainless Steel


Spacers - Round - Through Bore - Steel
Spacers - Round - Through Bore - Steel

Match Strength: 55%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Metallic

Shaft spacers - Steel


Standoffs - Round
Standoffs - Round

Match Strength: 55%

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


Bungs

TopHide Pictures

Bungs - Round
Bungs - Round

Match Strength: 55%

Also see combined categories:
All Bungs

Plastic bungs fit inside round tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Related Information:
Round Bungs

Bungs - Round - Threaded
Bungs - Round - Threaded

Match Strength: 55%

Also see combined categories:
All Bungs

Round tubing end inserts with a thread


Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Acetal
Rod - Round - Acetal

Match Strength: 55%

Also see combined categories:
All Plastic Rod

Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.41 g/cm3 - Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa / Hardness 80 Rockwell M. Small diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.


Rod - Round - Aluminium
Rod - Round - Aluminium

Match Strength: 55%

Also see combined categories:
All Metal Rod

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Rod - Round - Brass
Rod - Round - Brass

Match Strength: 55%

Also see combined categories:
All Metal Rod

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Rod - Round - Bronze - LG2 Standard
Rod - Round - Bronze - LG2 Standard

Match Strength: 55%

Also see combined categories:
All Metal Rod

Leaded Gunmetal Bronze. Product will machine to the sizes listed and is supplied larger than listed.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Longer lengths available on special request. Composition (Approx.) : Copper 85%, Tin 5%, Zinc 5%, Lead 5%. AS1565-83600 / Hardness : 70-90 BHN. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Rod - Round - Carbon Fibre
Rod - Round - Carbon Fibre

Match Strength: 55%

Also see combined categories:
All Plastic Rod

High impact light weight carbon fibre for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Rod - Round - Glass Fibre
Rod - Round - Glass Fibre

Match Strength: 55%

Also see combined categories:
All Plastic Rod

High impact light weight fibreglass for modelling.

Glass fibre rod is not smooth.


Rod - Round - Nylon
Rod - Round - Nylon

Match Strength: 55%

Also see combined categories:
All Plastic Rod

High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.


Rod - Round - Polyester PETP
Rod - Round - Polyester PETP

Match Strength: 55%

Also see combined categories:
All Plastic Rod

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.


Rod - Round - PTFE
Rod - Round - PTFE

Match Strength: 55%

Also see combined categories:
All Plastic Rod

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.


Rod - Round - Sintered Bronze
Rod - Round - Sintered Bronze

Match Strength: 55%

Also see combined categories:
All Metal Rod

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.


Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Match Strength: 55%

Also see combined categories:
All Metal Rod

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Match Strength: 55%

Also see combined categories:
All Metal Rod

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.


Rod - Round - Urethane
Rod - Round - Urethane

Match Strength: 55%

Also see combined categories:
All Plastic Rod

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Diameter +/- 2 percent.


Tips

TopHide Pictures

Tips - Round
Tips - Round

Match Strength: 55%

Plastic tips fit over outside of tubing.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.


Tube and Tubing

TopHide Pictures

Tube - Round - Aluminium
Tube - Round - Aluminium

Match Strength: 55%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Aluminium Properties

Tube - Round - Brass
Tube - Round - Brass

Match Strength: 55%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Brass Properties

Tube - Round - Bronze - LG2 Standard
Tube - Round - Bronze - LG2 Standard

Match Strength: 55%

Also see combined categories:
All Metal Tube

Leaded Gunmetal Bronze tubing. Product will machine to the sizes listed and is supplied will be larger on OD and smaller on bore.

Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on bore. Longer lengths available on special request. Composition (Approx.) : Copper 85%, Tin 5%, Zinc 5%, Lead 5%. AS1565-83600 / Hardness : 70-90 BHN. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Tube - Round - Carbon Fibre
Tube - Round - Carbon Fibre

Match Strength: 55%

Also see combined categories:
All Non Metallic Tube

High impact light weight carbon fibre hollow tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Tube - Round - Copper
Tube - Round - Copper

Match Strength: 55%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Tube - Round - Sintered Bronze
Tube - Round - Sintered Bronze

Match Strength: 55%

Also see combined categories:
All Metal Tube

Oil impregnated sintered bronze tubing - self lubricating. Product will machine to the sizes listed and is supplied will be larger on OD and smaller on bore.

Sizes listed are FINISHED SIZE. Product supplied will be larger on OD and smaller on ID to allow for machining. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.


Tube - Round - Soft Metal Packs
Tube - Round - Soft Metal Packs

Match Strength: 55%

Also see combined categories:
All Metal Tube

For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Match Strength: 55%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Stainless Steel Properties

Bumpers

TopHide Pictures

Bumpers - Round - Urethane - Bonded to Steel Plate
Bumpers - Round - Urethane - Bonded to Steel Plate

Match Strength: 55%

Also see combined categories:
All Bumpers


Bumpers - Round - Urethane - Female
Bumpers - Round - Urethane - Female

Match Strength: 55%

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core.


Bumpers - Round - Urethane - Female Washer
Bumpers - Round - Urethane - Female Washer

Match Strength: 55%

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.


Bumpers - Round - Urethane - Male
Bumpers - Round - Urethane - Male

Match Strength: 55%

Also see combined categories:
All Male Bumpers
All Bumpers

With steel core.


Circlips

TopHide Pictures

Circlips - External - Round Section
Circlips - External - Round Section

Match Strength: 55%

Also see combined categories:
All External Circlips

DIN7993A / RW / BN825.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.


Circlips - Internal - Round Section
Circlips - Internal - Round Section

Match Strength: 55%

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.


Plungers Ball

TopHide Pictures

Stops - Spring - Round Acetal Nose
Stops - Spring - Round Acetal Nose

Match Strength: 55%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is hardened and ground smooth. Properly radiused nose for perfect fit with no wobble. Aluminium body.


Stops - Spring - Round Steel Nose
Stops - Spring - Round Steel Nose

Match Strength: 55%

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is hardened and ground smooth. Properly radiused nose for perfect fit with no wobble. Aluminium body.


Pins - Pull

TopHide Pictures

Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Match Strength: 55%

Also see combined categories:
All Roll Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Match Strength: 55%

Also see combined categories:
All Roll Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Match Strength: 55%

Also see combined categories:
All Roll Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.


Hooks

TopHide Pictures

Tie Downs - Round - With Spacer
Tie Downs - Round - With Spacer

Match Strength: 55%

Zinc plated steel with plastic spacer. Ultimate load 530kg.


Lifting Chain

TopHide Pictures

Slings - Chain - Round - Endless - Tuflex
Slings - Chain - Round - Endless - Tuflex

Match Strength: 55%

Also see combined categories:
All Slings

Round slings have a double wall cover for greater life and added protection.

Wear points can be shifted to extend the life of the sling. Chokes tighter and releases easier than other slings. Colour coded for rating capacity. Has red core warning yarn inspection system.


Keys and Keysteel

TopHide Pictures

Keysteel Lengths - Round
Keysteel Lengths - Round

Match Strength: 55%

Also see combined categories:
All Keysteel Lengths

Manufactured slightly oversize to prevent machine backlash.


Bearings and Housings Insert Type

TopHide Pictures

Housings - Bearing - Flanged - Round - Cast Iron
Housings - Bearing - Flanged - Round - Cast Iron

Match Strength: 55%

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit

Pins - Dowel

TopHide Pictures

Pins - Hammer Drive - Round Head
Pins - Hammer Drive - Round Head

Match Strength: 55%

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.


Leadscrews

TopHide Pictures

Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Match Strength: 55%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:
Metric Whirled Leadscrew

Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300
Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300

Match Strength: 55%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300 Plastic. Single Start / Right Hand.

Related Information:
Metric Whirled Leadscrew

Leadscrew Nuts - Metric - Round - Plastic - Nylon
Leadscrew Nuts - Metric - Round - Plastic - Nylon

Match Strength: 55%

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Black Nylon 6.6. Wear Measured by Weight Reduction: 1.94wt.-%. Test Conditions: Load Direction: Horizontal Shaft Material: Stainless Steel Load: 10kg. Test Conditions: Speed: 300Rpm Cycles: 10,000 Stroke: 160mm Lubrication: None. Maintenance free. Support higher loads. Dry running. Dirt resistance.

Related Information:
Metric Whirled Leadscrew

Suspension Units

TopHide Pictures

Suspension Units - Rubber - Round - Bolt On
Suspension Units - Rubber - Round - Bolt On

Match Strength: 55%

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Suspension Units - Rubber - Round - Clamps
Suspension Units - Rubber - Round - Clamps

Match Strength: 55%

Also see combined categories:
All Suspension Units

Steel painted construction. For longer units two or more clamps are recommended. Welding any adaption parts on ROSTA rubber suspension units is NOT RECOMMENDED. Bolts not supplied. Clamp type BK for round suspension units DKA and DKS.


Suspension Units - Rubber - Round - Insert Type
Suspension Units - Rubber - Round - Insert Type

Match Strength: 55%

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Balsa

TopHide Pictures

Balsa Wood - Dowel
Balsa Wood - Dowel

Match Strength: 54%

Round section dowel. Delivery Surcharges May Apply on Selected Items

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.


Bungs

TopHide Pictures

Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round

Match Strength: 54%

Also see combined categories:
All Bungs

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:
Round Bungs

Tube and Tubing

TopHide Pictures

Tube - Square - Carbon Fibre - Round Hole
Tube - Square - Carbon Fibre - Round Hole

Match Strength: 54%

Also see combined categories:
All Non Metallic Tube

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Base Type - Round
Mounts - Leveling - Base Type - Round

Match Strength: 54%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For loads of 45 to 5350 kg.


Pins - Dowel

TopHide Pictures

Pins - Dowel - Standard - Stainless Steel - Rounded Both Ends
Pins - Dowel - Standard - Stainless Steel - Rounded Both Ends

Match Strength: 54%

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - Various Corrosion Resistant Grades - DIN7


Screws Round Head

TopHide Pictures

Screws - Roof Bolt - Steel
Screws - Roof Bolt - Steel

Match Strength: 54%

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric and BSW only. Supplied with nut.

Nuts sold seperately - See Nuts.


Pins - Wirelock

TopHide Pictures

Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel
Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Match Strength: 53%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel
Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Match Strength: 53%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel
Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel

Match Strength: 53%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel
Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Match Strength: 53%

Also see combined categories:
All Wire Lock Lynch Pins

Also known as snapper pins


Universal Joints

TopHide Pictures

Universal Joints - Quick Release Needle Roller - Round Bore
Universal Joints - Quick Release Needle Roller - Round Bore

Match Strength: 53%

Also see combined categories:
All Universal Joints

DIN808-W Low Backlash with Sealed Bearings

Forged centre cross with hard ground ends for sealed needle bearings. 4000 RPM Max. Round bore both sides.


Tools Threading

TopHide Pictures

Tools - Die Holders
Tools - Die Holders

Match Strength: 53%

Also see combined categories:
All Tools

Bar and round holders. 16mm, 20.64mm and 25.4mm (inch).


Keys and Keysteel

TopHide Pictures

Keys - Machine - Carbon Steel
Keys - Machine - Carbon Steel

Match Strength: 52%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Keys - Machine - Stainless Steel
Keys - Machine - Stainless Steel

Match Strength: 52%

Also see combined categories:
All Machine Keys

Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6884


Bearings Ball

TopHide Pictures

Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD

Match Strength: 51%

Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.


Knobs Ball

TopHide Pictures

Knobs - Ball - Threaded - Plastic with Groove
Knobs - Ball - Threaded - Plastic with Groove

Match Strength: 51%

Also see combined categories:
All Ball Knobs
All Knobs

Black plastic ball knobs with a groove around the circumference. Brass threaded insert.


Latches

TopHide Pictures

Latches - Pull - Flush - Locking
Latches - Pull - Flush - Locking

Match Strength: 51%

Low profile. Corrosion resistant. Simple 50.8mm (2 in.) round hole installation. Mounts in panels up to 22.2mm thick. M5 philips pan head mounting screws. Includes tab for inside actuation.

Max working load 26kg. Ultimate load 53kg. Black polycarbonate with stainless spring, keeper and screws.


Nuts Lock

TopHide Pictures

Nuts - Hexagonal - Weld - Steel
Nuts - Hexagonal - Weld - Steel

Match Strength: 51%

Also see combined categories:
All Lock Nuts

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.


Sleeves

TopHide Pictures

Sleeves - Square Hole - Plain - Carbon Steel
Sleeves - Square Hole - Plain - Carbon Steel

Match Strength: 51%

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Sleeves - Square Hole - Threaded - Carbon Steel
Sleeves - Square Hole - Threaded - Carbon Steel

Match Strength: 51%

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


Pulleys Grooved

TopHide Pictures

Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Match Strength: 50%

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Related Information:
Rounthane Belts

Sleeves

TopHide Pictures

Sleeves - Hex Hole - Carbon Steel
Sleeves - Hex Hole - Carbon Steel

Match Strength: 49%

Also see combined categories:
All Hex Hole Sleeves

Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Hygienic - 304 Stainless Steel
Mounts - Leveling - Hygienic - 304 Stainless Steel

Match Strength: 49%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.


Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Match Strength: 49%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Match Strength: 49%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Rope and Cable

TopHide Pictures

Attachments - Ball Plugs
Attachments - Ball Plugs

Match Strength: 49%

Also see combined categories:
All Cable Attachments

F and L dimensions are obtained after swaging. Before swaging the fitting is round.


Attachments - Threaded Plugs
Attachments - Threaded Plugs

Match Strength: 49%

Also see combined categories:
All Cable Attachments

F and L dimensions are obtained after swaging. Before swaging the fitting is round.


Sleeves

TopHide Pictures

Sleeves - Square Hole - Plain - Hardened
Sleeves - Square Hole - Plain - Hardened

Match Strength: 49%

Also see combined categories:
All Square Hole Sleeves

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Match Strength: 49%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.


Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Match Strength: 49%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.


Screws Pan Head

TopHide Pictures

Screws - Pan Head - 316 Stainless - Philips
Screws - Pan Head - 316 Stainless - Philips

Match Strength: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.


Screws - Pan Head - 303-304 Stainless - Philips
Screws - Pan Head - 303-304 Stainless - Philips

Match Strength: 48%

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.


Sleeves

TopHide Pictures

Sleeves - Hex Hole - Hardened
Sleeves - Hex Hole - Hardened

Match Strength: 47%

Also see combined categories:
All Hex Hole Sleeves

Pre hardened to Rockwell 23-30C. Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.



Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Actuators Adhesives Adjusters Air Springs Airmovers Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Balsa Bar Bases Batteries Bearings Acetal Bearings Angular C... Bearings Automotive Bearings Ball Bearings Conveyor Bearings Crossed R... Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bearings Tapered R... Bearings Thrust Bearings Turbine Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts Flat Belts Rounthane Belts and Pulleys ... Blow Guns Bolts Books Bottles and Cans Brakes Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Buzzers Cable Cable Ties Cam Followers Cams Capacitors Carburettor Parts Carousels Cases Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Chips Circlips

Visa Card Accepted
Visa
Secure Checkout


Clamping Bushings Clamping Rings Clamps Cleaning Products Clevis Joints Clips Cloth Clutches Collars Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Magnetic Couplings Other Couplings Rigid Cranks and Wheels Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Dials Differentials Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Dubro Accessories Educational Projects Enclosures Engineering Sets Engineering and Ho... Epoxies Eyebolts Fasteners General Fastening Bushings Fishing Reel Parts Fittings Flexible Shaft Foam Food Processor Parts Framing

Master Card Accepted
Mastercard
Secure Checkout


Gadgets Games Amusement Games General Gas Springs Gear Blanks Gear Joining Gauges Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes BuOrd Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Power Gearboxes Right Angle Gearboxes Tee Gearheads BuOrd Gearheads Inline Gearheads MAX Gearheads Right Angle Gearmotors Gearmotors AC Gearmotors Basic Gearmotors DC Gearmotors DC Perm... Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Imperial Worms Gears Metric AntiB... Gears Metric Bevel

Pay By
Phone after Checkout
07 3245 7977
International +61 7 3245 7977


Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hinges Hobby Gears Hobby Servo Motors Hobby Shafting Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings to Suit B... Housings with Inte... Hubs ISOPADS Indexing Insulators Isolators Isomounts Jackmounts Jigsaws Keys Keys and Keysteel Kites Knob Kits Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe

Amex Accepted
Amex
Secure Checkout


Knobs Lock Knobs Mushroom Knobs Oval Knobs Pointer Knobs Precision Knobs Push Pull Knobs Round Knobs Soft Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Lazy Susans Leads and Connectors Leadscrew Actuators Leadscrews Levers Lifting Chain Linear Slides Locking Assemblies Locking Bushings Locking Compounds Locks Lubricants General... Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Ferrite Magnets Rare Earth Magnets Rubber and... Marking Measuring Equipment Measuring Gauges Medical Model Jet Turbine ... Modelling Materials

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Motor Drives Stepper Motors DC Motors DC MAX Series Motors Hybrid Stepper Motors Industrial ... Motors Stepper Motors Vibrating Motors with Gearhe... Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Finger Flex Mounts Leveling Mounts M Style Mounts Machinery Mounts Plate Mounts Rectangular Mounts Ring Mounts Square Mounts Uniload Mounts V Style Mounts Wedge Nuts Nuts Lock ORings ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Parts Bundles Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel

Visa Card Accepted
Visa
Secure Checkout


Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Plastic Plugs Plungers Ball Plungers Indexing Plungers Spring Positioning Power Adaptors Power Supplies Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Flat Belt Pulleys Grooved Pulleys Idler Pulleys PosiDrive Pulleys Synchromesh Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Resins Rivets Robotic Servo Motors Robotic Wheels Rod Ends Rollers Rope and Cable Rotary Safety Channel Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach

Master Card Accepted
Mastercard
Secure Checkout


Screws Countersunk Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sensors Sets Shaft Extenders an... Shaft Locks Shafting Aluminium Shafting General P... Shafting Hollow Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Solar Parts Solarbotics Kits Soldering Spa Jet Motor Bear... Spacers Splined Shafts and... Spring Anchors Spring Assemblies Spring Damped Mounts Spring Motors

Pay By
Phone after Checkout
07 3245 7977
International +61 7 3245 7977


Spring Mounts Spring Reels Spring Washers Spring Wire Springs Anti Backlash Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General Springs Torsion Sprockets PosiDrive Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stays Steam Engine Parts Straps Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Suspension Units Switches Tape Taper Grips Tee Joints Tension Bushings Tensioners Testers Thread Thread Inserts Threaded Rod Throwing Planes Timing Belt Lengths Timing Belts and P...

Amex Accepted
Amex
Secure Checkout


Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Crimping Tools Cutting Tools Deburring Tools Dental Repair Tools General Purpose Tools Magnetic Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Torches Tracks Tube and Tubing Turntables Universal Joint Co... Universal Joints VRings Vacuum Cleaners Vee Belts Washers Aligning Washers Finishing

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 148416 products in 3925 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.