All Items: Rod Ends - Categories


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Plastic - Female

Rod Ends - Plastic - Female

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends


Rod Ends - Plastic - Male

Rod Ends - Plastic - Male

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends


Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female

Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Female

Also known as Heim Joints


Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male

Rod Ends - Stainless Steel 303 Housing and Ball - Nylon Raceway - Male

Also known as Heim Joints


Click for combined categories: All Male Rod Ends

Click for combined categories: All Stainless Steel Male Rod Ends


Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Female

Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Female

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male

Rod Ends - Stainless Steel 303 with 420 Ball - PTFE Lined - Male

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Stainless Steel Male Rod Ends


Rod Ends - Stainless Steel 304 with 1.4412 Ball - PTFE Lined - Female

Rod Ends - Stainless Steel 304 with 1.4412 Ball - PTFE Lined - Female

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Stainless Steel 304 with 1.4412 Ball - PTFE Lined - Male

Rod Ends - Stainless Steel 304 with 1.4412 Ball - PTFE Lined - Male

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Stainless Steel Male Rod Ends


Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female

Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined - Female

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Steel - Bronze Lined - Female

Rod Ends - Steel - Bronze Lined - Female

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Bronze Lined - High Clearance - Female

Rod Ends - Steel - Bronze Lined - High Clearance - Female

High clearance very free moving self lubricating. Also known as Heim Joints

100 Cr6 Bearing Steel on bronze bearing surface. Housings - Sizes 4 to 12 Low Carbon Steel, sizes 16-20 High Carbon Alloy Steel. Minus 30 oC to 150 oC Operating Temperature Range. Multiply Static Load by 0.5 for simple radial dynamic load or by 0.25 if load is varied. Maintenance free, wear resistant bearing surfaces, low constant rotational resistance.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Bronze Lined - High Clearance - Male

Rod Ends - Steel - Bronze Lined - High Clearance - Male

High clearance very free moving self lubricating. Also known as Heim Joints

100 Cr6 Bearing Steel on bronze bearing surface. Housings - Sizes 5 to 12 Low Carbon Steel, sizes 16-20 High Carbon Alloy Steel. Minus 30 oC to 150 oC Operating Temperature Range. Multiply Static Load by 0.5 for simple radial dynamic load or by 0.25 if load is varied. Maintenance free, wear resistant bearing surfaces, low constant rotational resistance.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Bronze Lined - Male

Rod Ends - Steel - Bronze Lined - Male

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Heavy Duty - Ball - Enlarged Eye - Female

Rod Ends - Steel - Heavy Duty - Ball - Enlarged Eye - Female

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Heavy Duty - Ball - Female

Rod Ends - Steel - Heavy Duty - Ball - Female

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Heavy Duty - Ball - Male

Rod Ends - Steel - Heavy Duty - Ball - Male

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Heavy Duty - Ball - Reduced Eye - Male

Rod Ends - Steel - Heavy Duty - Ball - Reduced Eye - Male

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Heavy Duty - Roller - Female

Rod Ends - Steel - Heavy Duty - Roller - Female

With integral self aligning roller bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Heavy Duty - Roller - Male

Rod Ends - Steel - Heavy Duty - Roller - Male

With integral self aligning roller bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Nylon Raceway - Female

Rod Ends - Steel - Nylon Raceway - Female

Also known as Heim Joints


Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Nylon Raceway - Male

Rod Ends - Steel - Nylon Raceway - Male

Also known as Heim Joints


Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - PTFE Lined - Female

Rod Ends - Steel - PTFE Lined - Female

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - PTFE Lined - Male

Rod Ends - Steel - PTFE Lined - Male

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Stamped - Female

Rod Ends - Steel - Stamped - Female

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Studded - Nylon Seat - Female

Rod Ends - Steel - Studded - Nylon Seat - Female

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Female Rod Ends with Stud


Rod Ends - Steel - Studded - Nylon Seat - Male

Rod Ends - Steel - Studded - Nylon Seat - Male

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Male Rod Ends with Stud


Rod Ends - Steel - Studded - PTFE Seat - Female

Rod Ends - Steel - Studded - PTFE Seat - Female

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Female Rod Ends with Stud


Rod Ends - Steel - Studded - PTFE Seat - Male

Rod Ends - Steel - Studded - PTFE Seat - Male

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Male Rod Ends with Stud


Rod Ends - Steel - Studded - Quick Disconnect - Female

Rod Ends - Steel - Studded - Quick Disconnect - Female

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.

Click for combined categories: All Female Rod Ends with Stud


Rod Ends - Steel - Studded - Swaged Construction - Female

Rod Ends - Steel - Studded - Swaged Construction - Female

Designed for heavy duty service, they come with dirt shield to provide protection against contaminants.

Unique assembly swages metal to retain the ball in cavity resulting in increased pull out and wear resistance. Ball studs are surface hardened. Made of low carbon steel, plated and dichromate treated.

Click for combined categories: All Female Rod Ends with Stud


Clevis Joints

Hide Pictures

Go to Top  


Joints - Clevis - Plastic

Joints - Clevis - Plastic

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.

Click for combined categories: All Clevis Joints


Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill - General

Rod - Drill - General

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.

Click for combined categories: All Drill Rod

Related Information:
Silversteel


Balls

Hide Pictures

Go to Top  


Balls - Plastic - Bored

Balls - Plastic - Bored

Bored acetal balls as used in plastic rod ends.

Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight.

Click for combined categories: All Plastic Balls

Click for combined categories: All Non Metallic Balls

Related Information:
Other Types of Balls


Balls - Steel - Bored

Balls - Steel - Bored

Bored steel balls as used in steel rod ends.

Hardness: 58-64 Rc. Material: SUJ-2.

Click for combined categories: All Metallic Balls

Related Information:
Other Types of Balls


Bungs

Hide Pictures

Go to Top  


Bungs and Caps - Reversible - Round

Bungs and Caps - Reversible - Round

Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Click for combined categories: All Bungs

Related Information:
Round Bungs


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Adjustable - Push Type - Max  100N

Gas Springs - Adjustable - Push Type - Max 100N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 1300N

Gas Springs - Adjustable - Push Type - Max 1300N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  180N

Gas Springs - Adjustable - Push Type - Max 180N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 2600N

Gas Springs - Adjustable - Push Type - Max 2600N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  400N

Gas Springs - Adjustable - Push Type - Max 400N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 400N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 5000N

Gas Springs - Adjustable - Push Type - Max 5000N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 500N to 5000N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  700N

Gas Springs - Adjustable - Push Type - Max 700N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force).

Click for combined categories: All Gas Springs


Shock Absorbers

Hide Pictures

Go to Top  


Shock Absorbers - Ondrives

Shock Absorbers - Ondrives

Body: Steel with black oxide finish, Stainless Steel or Chrome plated piston rod. Operating Temperature Range: -10oC to +70oC. Important: Provide mechanical stop 0.5mm before end of stroke.

Click for combined categories: All Shock Absorbers


Eyebolts

Hide Pictures

Go to Top  


Bolts - Eye - Bent Rod - Steel

Bolts - Eye - Bent Rod - Steel

Not recommended for lifting.

Carbon steel zinc plated. Complete with nut. Rolled threads.

Click for combined categories: All Eye Bolts


Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Aluminium

Rod - Round - Aluminium

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod


Rod - Round - Brass

Rod - Round - Brass

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod


Snap Buttons

Hide Pictures

Go to Top  


Snap Buttons - Double End

Snap Buttons - Double End

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill Blanks

Rod - Drill Blanks

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.

Click for combined categories: All Drill Rod


Rod - Drill - A-2 Air Hardening

Rod - Drill - A-2 Air Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - O-1 Oil Hardening

Rod - Drill - O-1 Oil Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - Oil Hardening - 480 Series

Rod - Drill - Oil Hardening - 480 Series

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - S-7 Air Hardening

Rod - Drill - S-7 Air Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - W-1 Water Hardening

Rod - Drill - W-1 Water Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Stainless Steel

Rod - Round - Stainless Steel

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Click for combined categories: All Metal Rod


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Soft Metal Packs

Rod - Round - Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.

Click for combined categories: All Metal Rod


Snap Buttons

Hide Pictures

Go to Top  


Snap Buttons - Single End - Dog Leg

Snap Buttons - Single End - Dog Leg

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Snap Buttons - Single End - Spring Leg

Snap Buttons - Single End - Spring Leg

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Cased

Shafts - Flexible - Coupling Ends - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open (Ondrives)

Shafts - Flexible - Coupling Ends - Open (Ondrives)

Bi-directional flexible shaft couplings.

Hubs: 220 MO7 / Shaft: Steel. Standard bored ends. Keyways can be included in the bores for additional cost.

Click for combined categories: All Flexible Shaft


Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Acetal

Rod - Round - Acetal

Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.41 g/cm3 - Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa / Hardness 80 Rockwell M. Small diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - Bronze - LG2 (Standard)

Rod - Round - Bronze - LG2 (Standard)

Leaded Gunmetal Bronze. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Longer lengths available on special request. Composition (Approx.) : Copper 85%, Tin 5%, Zinc 5%, Lead 5%. AS1565-83600 / Hardness : 70-90 BHN. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod


Rod - Round - Carbon Fibre

Rod - Round - Carbon Fibre

High impact light weight carbon fibre for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Plastic Rod


Rod - Round - Glass Fibre

Rod - Round - Glass Fibre

High impact light weight fibreglass for modelling.

Glass fibre rod is not smooth.

Click for combined categories: All Plastic Rod


Rod - Round - Nylon

Rod - Round - Nylon

High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - Polyester PETP

Rod - Round - Polyester PETP

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - PTFE

Rod - Round - PTFE

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - Sintered Bronze

Rod - Round - Sintered Bronze

Sintered bronze is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Click for combined categories: All Metal Rod


Rod - Round - Urethane

Rod - Round - Urethane

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Diameter +/- 2 percent.

Click for combined categories: All Plastic Rod


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Aluminium

Threaded Rod - Allthread - Aluminium

UNC and UNF light weight aluminium.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Brass

Threaded Rod - Allthread - Brass

UNC - UNF - METRIC brass.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Plastic

Threaded Rod - Allthread - Plastic

UNC - UNF - METRIC - Nylon and PVC.

Light Weight. Non Corrosive. Vibration Resistant.

Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Stainless Steel

Threaded Rod - Allthread - Stainless Steel

UNC - UNF - METRIC - 303, 304 and 316 grades.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Steel - Plain

Threaded Rod - Allthread - Steel - Plain

UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile.


Click for combined categories: All Threaded Rod


Threaded Rod - Allthread - Steel - Zinc Plated

Threaded Rod - Allthread - Steel - Zinc Plated

UNC - UNF - METRIC - BSW


Click for combined categories: All Threaded Rod


Yoke Ends

Hide Pictures

Go to Top  


Yoke Ends - Blank

Yoke Ends - Blank

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Click for combined categories: All Yoke Ends

Related Information:
Other Clevis Joints

Other Clevis Pins


Yoke Ends - Threaded

Yoke Ends - Threaded

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Click for combined categories: All Yoke Ends

Related Information:
Other Clevis Joints

Other Clevis Pins


Bar

Hide Pictures

Go to Top  


Hexagonal Bar - Brass

Hexagonal Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Square Bar - Brass

Square Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Handles

Hide Pictures

Go to Top  


Handles - Steel - End Ferrules

Handles - Steel - End Ferrules


Click for combined categories: All Handles


Hooks

Hide Pictures

Go to Top  


Hooks - Ball End - 304 Stainless

Hooks - Ball End - 304 Stainless

Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.


Magnets Alnico

Hide Pictures

Go to Top  


Magnets - Alnico - Rod - Sintered

Magnets - Alnico - Rod - Sintered


Click for combined categories: All Magnets

Click for combined categories: All Alnico Magnets


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - End Fittings

Gas Springs - End Fittings


Click for combined categories: All Gas Springs


Bar

Hide Pictures

Go to Top  


Hexagonal Bar - Carbon Steel

Hexagonal Bar - Carbon Steel

Saw Cut Ends. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Square Bar - Carbon Steel

Square Bar - Carbon Steel

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Pins - Pull

Hide Pictures

Go to Top  


Pins - Pull - Threaded End - Aluminium and Steel

Pins - Pull - Threaded End - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.

Click for combined categories: All Roll Pins


Pins - Pull - Threaded End - Stainless Steel

Pins - Pull - Threaded End - Stainless Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.

Click for combined categories: All Roll Pins


Pins - Pull - Threaded End - Steel

Pins - Pull - Threaded End - Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.

Click for combined categories: All Roll Pins


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Assembly End Fittings

Gas Springs - Assembly End Fittings


Click for combined categories: All Gas Springs


Pins - Ball Lock

Hide Pictures

Go to Top  


Pins - Ball Lock - Threaded End - Stainless Steel

Pins - Ball Lock - Threaded End - Stainless Steel

One end threaded so you can attach your own handle or knob.


Click for combined categories: All Ball Lock Pins


Tee Joints

Hide Pictures

Go to Top  


Joints - Tee - Tubing and Rod

Joints - Tee - Tubing and Rod

Inexpensive nylon joiners for hobby tubing and rod


Actuators

Hide Pictures

Go to Top  


Actuators - Screw - Translating - Clevis End

Actuators - Screw - Translating - Clevis End

Precision linear adjustment.

Material : Steel. Worm and Screw: Steel.

Ball Screws

Hide Pictures

Go to Top  


Ballscrew - Rolled - Stainless - Integrated End Journal - Dia 10mm - Lead 2mm

Ballscrew - Rolled - Stainless - Integrated End Journal - Dia 10mm - Lead 2mm

Not for sale outside of Australia and New Zealand


Click for combined categories: All Ball Screws


Ballscrew - Rolled - Stainless - Integrated End Journal - Dia 6mm - Lead 1mm

Ballscrew - Rolled - Stainless - Integrated End Journal - Dia 6mm - Lead 1mm

Not for sale outside of Australia and New Zealand


Click for combined categories: All Ball Screws


Framing

Hide Pictures

Go to Top  


Automat - Frame Kit Threaded Rods

Automat - Frame Kit Threaded Rods

All M3.5 Thread. See PDF file in FTP Directory for more information. Educational tool suitable for mechanical teaching institutions.

All M3.5 Thread Mild Steel.

Click for combined categories: All Automat Frame Components

Related Information:
See all Automat Categories


Latches

Hide Pictures

Go to Top  


Handles - Latching - 2-Point Locking Rod Kit

Handles - Latching - 2-Point Locking Rod Kit

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Cold Rolled Steel

Shafting - Ground - Cold Rolled Steel

Cold rolled steel with saw cut ends and smooth finish


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Circlips

Hide Pictures

Go to Top  


E-Clips - External Bowed

E-Clips - External Bowed

For end play take up.

Thickness tolerance +/- 0.025.

Click for combined categories: All E-Clips


Pins - Dowel

Hide Pictures

Go to Top  


Pins - Dowel - Standard - Hardened Steel - Chamfered End

Pins - Dowel - Standard - Hardened Steel - Chamfered End

Precision Dowel Pins - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins.

Click for combined categories: All Dowel Pins



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154975 products in 3671 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.