Rings - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

MOODSTONE-RING-SMOOTH found in Toys - Gadgets
Description: Mood Ring. Info: Mood Stone. Info: One size fits all with adjustable band.

Backorder



Clamping Rings

Hide Pictures

Go to Top  


Rings - Retaining - C Type External - For Linear Bearings

Rings - Retaining - C Type External - For Linear Bearings

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.


Rings - Retaining - PR Type Internal - For Linear Bearings

Rings - Retaining - PR Type Internal - For Linear Bearings

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


Rings - Split - Stainless Steel

Rings - Split - Stainless Steel

316 stainless steel wire rings.


Click for combined categories: All Split Rings


Rings - Split - Zinc Plated Steel

Rings - Split - Zinc Plated Steel

Zinc plated hard drawn steel wire rings.


Click for combined categories: All Split Rings


Hoist Rings

Hide Pictures

Go to Top  


Rings - Hoist - Bar-Tite -tm-

Rings - Hoist - Bar-Tite -tm-

Range of movement 180o pivot, 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor minimum 5 to 1. Black oxide finish per Mil C-13924B. Certified heat treatment.

Click for combined categories: All Hoist Rings


Rings - Hoist - Heavy Duty

Rings - Hoist - Heavy Duty

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.

Click for combined categories: All Hoist Rings


Rings - Hoist - Heavy Duty - MIL-STD1365

Rings - Hoist - Heavy Duty - MIL-STD1365

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.

Click for combined categories: All Hoist Rings


Rings - Hoist - Safety Engineered

Rings - Hoist - Safety Engineered

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.

Click for combined categories: All Hoist Rings


Rings - Hoist - Side Pull - External Wrench Mount

Rings - Hoist - Side Pull - External Wrench Mount

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Rings - Hoist - Side Pull - Full Swivel

Rings - Hoist - Side Pull - Full Swivel

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.

Click for combined categories: All Hoist Rings


Rings - Hoist - Side Pull - Internal-External Wrench Mount

Rings - Hoist - Side Pull - Internal-External Wrench Mount

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Rings - Hoist - Spin-N-Lok

Rings - Hoist - Spin-N-Lok

Range of movement 180o pivot and 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor 5 to 1 minimum. Ideal for lifting and moving road plates. New light weight design and replaceable stud.

Click for combined categories: All Hoist Rings


Rings - Hoist - Stationary - Without Screws

Rings - Hoist - Stationary - Without Screws

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Rings - Hoist - Stationary - With Screws

Rings - Hoist - Stationary - With Screws

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Click for combined categories: All Hoist Rings


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Click for combined categories: All Hoist Rings


Rings - Hoist - With Ball Bearings

Rings - Hoist - With Ball Bearings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

Click for combined categories: All Hoist Rings


Rings - Lift - Universal

Rings - Lift - Universal

For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.


Click for combined categories: All Hoist Rings


Backup Rings

Hide Pictures

Go to Top  


Rings - Backup

Rings - Backup

Durometer 90 Nitrile Rubber back up rings.


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - With Snap Ring - Chrome Steel

Bearings - Ball - With Snap Ring - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Bearings Needle Roller

Hide Pictures

Go to Top  


Bearings - Needle Roller - Inner Rings

Bearings - Needle Roller - Inner Rings

Hardened sleeves for needle roller bearings.


Bearings - Needle Roller - Machined - With Inner Ring

Bearings - Needle Roller - Machined - With Inner Ring


Bearings - Needle Roller - Machined - Without Inner Ring

Bearings - Needle Roller - Machined - Without Inner Ring


Bearings Pivot

Hide Pictures

Go to Top  


Bearings - Pivot - With Inner Ring

Bearings - Pivot - With Inner Ring

Note! Minimum quantities apply to production of these items.

Click for combined categories: All Pivot Bearings


Bearings - Pivot - Without Inner Ring

Bearings - Pivot - Without Inner Ring

Note! Minimum quantities apply to production of these items.

Click for combined categories: All Pivot Bearings


Clamping Rings

Hide Pictures

Go to Top  


Spiral Rings - External - Heavy Duty

Spiral Rings - External - Heavy Duty

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.

Click for combined categories: All Spiral Rings


Spiral Rings - External - Medium Duty

Spiral Rings - External - Medium Duty

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.

Click for combined categories: All Spiral Rings


Spiral Rings - Internal - Medium Duty

Spiral Rings - Internal - Medium Duty

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.

Click for combined categories: All Spiral Rings


Spiral Rings - Internal - Medium/Heavy Duty

Spiral Rings - Internal - Medium/Heavy Duty

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.

Click for combined categories: All Spiral Rings


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Pull Ring - Locking - Stainless/Acetal

Plungers - Spring - Pull Ring - Locking - Stainless/Acetal

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Pull Ring - Locking - Steel/Acetal

Plungers - Spring - Pull Ring - Locking - Steel/Acetal

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Pull Ring - Non Locking - Stainless/Acetal

Plungers - Spring - Pull Ring - Non Locking - Stainless/Acetal

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Pull Ring - Non Locking - Steel/Acetal

Plungers - Spring - Pull Ring - Non Locking - Steel/Acetal

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Stainless

Plungers - Spring - Ring Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Stainless/Phenolic

Plungers - Spring - Ring Handle - Locking - Stainless/Phenolic

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Steel

Plungers - Spring - Ring Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Steel/Phenolic

Plungers - Spring - Ring Handle - Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Stainless

Plungers - Spring - Ring Handle - Non Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Stainless/Phenolic

Plungers - Spring - Ring Handle - Non Locking - Stainless/Phenolic

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Steel

Plungers - Spring - Ring Handle - Non Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Steel/Phenolic

Plungers - Spring - Ring Handle - Non Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


O-Rings for Dental Applications

Hide Pictures

Go to Top  


O Rings - Dental

O Rings - Dental

Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:
Dental Bearings

Tools for Dental Handpiece Repair


Hoist Rings

Hide Pictures

Go to Top  


Screws - For Rings - Hoist

Screws - For Rings - Hoist

High tensile cap screws for use with stationary hoist rings


Click for combined categories: All Hoist Rings


O-Rings

Hide Pictures

Go to Top  


O Rings - Cord

O Rings - Cord

Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.

Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (VitonR): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis.

O Rings - EPDM Rubber

O Rings - EPDM Rubber

Suitable for heated water and steam.

Temperature Range: -55oC to +150oC. Chemically resistant to Hydraulic Fluids. Resistant to alcohols, glycol engine coolants and SKY-DROL (phosphate ester hydraulic fluid).

Click for combined categories: All O-Rings


O Rings - Fluoroelastomer

O Rings - Fluoroelastomer

VitonR A for high temperature and chemical resistance.

Temperature Range: -20oC to +200oC. Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. VitonR A. Viton is usually supplied brown, but black may be substituted when brown is unavailable.

Click for combined categories: All O-Rings


O Rings - Neoprene Rubber

O Rings - Neoprene Rubber

Excellent resistance to ageing and weathering effects.

Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones.

Click for combined categories: All O-Rings


O Rings - Nitrile Rubber

O Rings - Nitrile Rubber

General purpose.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Click for combined categories: All O-Rings


O Rings - Quattro

O Rings - Quattro

Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings.

Click for combined categories: All O-Rings


O Rings - Silicone Rubber

O Rings - Silicone Rubber

High thermal resistance and cold flexibility.

Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.

Click for combined categories: All O-Rings


Clips

Hide Pictures

Go to Top  


Rings - D - Nickel Plated

Rings - D - Nickel Plated

Nickel plated D Rings


Rings - Round - Nickel Plated

Rings - Round - Nickel Plated

Nickel plated round rings


Tolerance

Hide Pictures

Go to Top  


Rings - Tolerance

Rings - Tolerance

Tolerance Rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.

Clips

Hide Pictures

Go to Top  


Push In Retaining Rings - Basic

Push In Retaining Rings - Basic

Thrust load shown is calculated for ideal conditions with mild steel bore.

Push On Retaining Rings - Basic

Push On Retaining Rings - Basic

M1465 / DTX / Seeger ZA and KS.

Thrust load shown is calculated for ideal conditions with mild steel shaft. If no thrust load is shown, testing is suggested.

Pins - Ball Lock

Hide Pictures

Go to Top  


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Half Ring Style

Pins - Ball Lock - Marine Style - Half Ring Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Ring Style

Pins - Ball Lock - Marine Style - Ring Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Hooks

Hide Pictures

Go to Top  


Hooks - Rope Rings - Recessed

Hooks - Rope Rings - Recessed

Zinc plated


Magnets Alnico

Hide Pictures

Go to Top  


Magnets - Alnico - Ring

Magnets - Alnico - Ring

Cast Alnico 5


Click for combined categories: All Magnets

Click for combined categories: All Alnico Magnets


Magnets Ceramic

Hide Pictures

Go to Top  


Magnets - Ceramic Ring

Magnets - Ceramic Ring


Click for combined categories: All Magnets

Click for combined categories: All Ceramic Magnets


Shock Absorbers

Hide Pictures

Go to Top  


Shock Absorbers - Hydraulic - Lock Rings

Shock Absorbers - Hydraulic - Lock Rings


Click for combined categories: All Shock Absorbers


Bearings Acetal

Hide Pictures

Go to Top  


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.

Click for combined categories: All Acetal Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.

Click for combined categories: All Acetal Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.

Click for combined categories: All Acetal Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Special Types

Bearings - Acetal - Special Types

Light duty acetal bearings used for drawer runners, light duty tracks and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

Click for combined categories: All Acetal Bearings


Bearings - Acetal - with Glass Balls

Bearings - Acetal - with Glass Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.

Click for combined categories: All Acetal Bearings

Related Information:
Acetal Bearings with 316 Stainless Steel Balls

Acetal Properties


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Load and speed capability depend on the bearing used. Use with steel or plastic bearing inserts for plastic housings.

Related Information:
Other Bearings to Suit


Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - Offset - Cast Iron

Housings - Bearing - Flanged - Offset - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Round - Cast Iron

Housings - Bearing - Flanged - Round - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Square - Cast Iron

Housings - Bearing - Flanged - Square - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Square - Plastic

Housings - Bearing - Flanged - Square - Plastic

Use with steel, plastic or stainless steel bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Other Bearings to Suit


Housings - Bearing - Pillow Block - Cast Iron

Housings - Bearing - Pillow Block - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Pillow Block - Plastic

Housings - Bearing - Pillow Block - Plastic

Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Bearings for Plastic Housings


Housings - Bearing - Pillow Block - Pressed Metal

Housings - Bearing - Pillow Block - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Bearings Automotive

Hide Pictures

Go to Top  


Bearings - Automotive - Trailer Wheel - Kits

Bearings - Automotive - Trailer Wheel - Kits

Front and rear wheel bearing and seal kits for popular box trailers, boat trailers and caravans


Bearings - Tapered Roller - Single Row - Inch Sets

Bearings - Tapered Roller - Single Row - Inch Sets

Common automotive sets include cup and cone


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - 316 Stainless Steel - Single Row

Bearings - Ball - 316 Stainless Steel - Single Row

Food and Medical grade Stainless Steel - Non Hardenable.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.0762 mm / -0.000 mm OD +0.000 mm / -0.0762 mm Width +/- 0.127 mm. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races.

Click for combined categories: All 300 Grade Stainless Bearings


Bearings - Ball - 440C Stainless

Bearings - Ball - 440C Stainless

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - 4 Point Contact

Bearings - Ball - 4 Point Contact

4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Bearings - Ball - Angular Contact - Chrome Steel

Bearings - Ball - Angular Contact - Chrome Steel

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Click for combined categories: All Angular Contact Bearings


Bearings - Ball - Ceramic Hybrid

Bearings - Ball - Ceramic Hybrid

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.

Click for combined categories: All Radial Ball Bearings


Bearings - Ball - Chrome Steel

Bearings - Ball - Chrome Steel

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - Double Row - Angular Contact

Bearings - Ball - Double Row - Angular Contact

Double Row Ball Bearings - Angular Contact.


Click for combined categories: All Double Row Ball Bearings


Bearings - Ball - Double Row - Self Aligning - Parallel Bore

Bearings - Ball - Double Row - Self Aligning - Parallel Bore


Click for combined categories: All Double Row Ball Bearings

Click for combined categories: All Self Aligning Ball Bearings


Bearings - Ball - Economy - 440C Stainless

Bearings - Ball - Economy - 440C Stainless

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Economy - Chrome Steel

Bearings - Ball - Economy - Chrome Steel

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Flanged - 440C Stainless

Bearings - Ball - Flanged - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - Chrome Steel

Bearings - Ball - Flanged - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - High Precision - 440C Stainless

Bearings - Ball - Flanged - High Precision - 440C Stainless

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - Flanged - WIR - 440C Stainless

Bearings - Ball - Flanged - WIR - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - Flanged - WIR - Chrome Steel

Bearings - Ball - Flanged - WIR - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - High Precision - 440C Stainless

Bearings - Ball - High Precision - 440C Stainless

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - High Precision - Chrome Steel

Bearings - Ball - High Precision - Chrome Steel

Chrome Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - High Speed Cage

Bearings - Ball - High Speed Cage

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Click for combined categories: All Radial Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.