All Items: Ratchets And Pawls - Categories


Ratchets and Pawls

Hide Pictures

Go to Top  


Pawls - For Ratchets

Pawls - For Ratchets

Used with ratchets listed on this site.

Related Information:
Ratchets without Hub


Ratchets - With Hub

Ratchets - With Hub

Match with pawls listed on this site.


Ratchets - Without Hub

Ratchets - Without Hub

Match with pawls listed on this site.


Hooks

Hide Pictures

Go to Top  


Tie Down - Load Hugger - Ratchet Assemblies

Tie Down - Load Hugger - Ratchet Assemblies

Secure loads and protect them against damage from shifting while in transit.


Click for combined categories: All Load Hugger Tie Downs


Tools Circlip

Hide Pictures

Go to Top  


Tools - Circlip Pliers - External

Tools - Circlip Pliers - External

External circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.

Click for combined categories: All Circlip Tools

Click for combined categories: All Tools


Tools - Circlip Pliers - Internal

Tools - Circlip Pliers - Internal

Internal circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.

Click for combined categories: All Circlip Tools

Click for combined categories: All Tools


Screws Captive

Hide Pictures

Go to Top  


Screws - Captive - Retractable - Steel

Screws - Captive - Retractable - Steel

Compliance with UL 1950 and EN 60950 codes for access areas. Ratchet mechanism allows screw to be tightened down by hand, but a tool is needed to loosen.Fully retractable captive to the panel and spring ejected.

Press in style. Bright chromate zinc plated, case hardened steel with aluminium knob and stainless steel spring. Knobs available either slotted or no.2 phillips.

Click for combined categories: All Captive Screws


Latches

Hide Pictures

Go to Top  


Latches - Pawl - Quarter Turn

Latches - Pawl - Quarter Turn

An ideal fastener for gasketed doors and access panels subject to wide thickness or misalignment tolerances.

Grip length is variable from 3.2mm to 36.5mm and is set by rotating the centre spindle. Latch can be opened with a quarter turn of the outer ring. Steel with black plastic outer ring. Installation hole diameter 19.43mm. Instructions included. Panel thickness from 1.2 to 3.2mm max. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - 1/4 Turn  - Slotted Pawl - 304 Stainless Steel

Latches - 1/4 Turn - Slotted Pawl - 304 Stainless Steel

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - Slotted Pawl - Black Finish

Latches - 1/4 Turn - Slotted Pawl - Black Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Zinc Diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - Slotted Pawl - Chrome Finish

Latches - 1/4 Turn - Slotted Pawl - Chrome Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Zinc Diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - 304 Stainless Steel

Latches - 1/4 Turn - L Handle with Pawl - 304 Stainless Steel

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - Black Finish

Latches - 1/4 Turn - L Handle with Pawl - Black Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - Chrome Finish

Latches - 1/4 Turn - L Handle with Pawl - Chrome Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - Chrome Finish - Padlockable

Latches - 1/4 Turn - L Handle with Pawl - Chrome Finish - Padlockable

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle with Pawl - Black Finish

Latches - 1/4 Turn -Tee Handle with Pawl - Black Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle with Pawl - Chrome Finish

Latches - 1/4 Turn -Tee Handle with Pawl - Chrome Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Includes lockable models where so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - Wing Handle with Pawl - Black Finish

Latches - 1/4 Turn - Wing Handle with Pawl - Black Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Padlockable only on items so marked. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - Wing Handle with Pawl - Chrome Finish

Latches - 1/4 Turn - Wing Handle with Pawl - Chrome Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - Arrowhead

Latches - Arrowhead

Arrow designates position of the pawl. Spring loaded pawl creates slight pressure against frame to eliminate rattles and movement.

Simple one hole installation. Spacers supplied for various panel thicknesses.

Latches - Adjustable Grip With Arrowhead

Latches - Adjustable Grip With Arrowhead

Arrow designates position of pawl. Latch operates through 90o rotation with a positive lock stop at both extremes. Use in either clockwise or counterclockwise applications. Panel thickness from 1.6mm to 4.7mm.

Knob height is adjustable. Grip range 4.05mm to 28.2mm with pawk reversed.

Latches - Spring - Knob Style

Latches - Spring - Knob Style

Smooth latching action. Camming action of spring pawl provides wide grip ranges. Black nylon with stainless steel spring. Hosuing is bright chromate zinc alloy plated steel with sealer. Designed to be riveted or screwed in place.


Latches - Adjustable Grip

Latches - Adjustable Grip

Made of carbon steel with black nylon knob. A quarter turn latches or unlatches. Knob includes pawl indicator to make sure pawl is in the proper position.


Latches - Push to Close

Latches - Push to Close

Knob stores flush and pops out at a touch. Turn the knob to open and push to close. Latches securely with knob in or out.

Accomodates misalignment. Use on flush, surface mount or perpendicular doors. Quick 31.8mm Diameter round hole installation. Polycarbonate / ABS blended material with glass filled black nylon keepers, nut and pawl. Corrosion and UV resistant. Chrome plated with 304 stainless steel internal springs. Max working load 22kg. Available with serrated pawl for self adjusting grip or regular pawl for fixed grip. Keepers included. Keeper for fixed grip is stainless steel.


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154975 products in 3671 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.